Code:
#!/bin/sh
#
# @(#)install.sh.m4 1.0 04/04/02 XSSC
#
# Installed System software for Fuji Xerox AP Printers.
#
copyright="Copyright(C) 2009 by Fuji Xerox Asia Pacific Pte Ltd. All rights reserved."
progtitle="FXAP UNIX Driver Installer for Redhat Linux"
progname="$0"
PATH=/usr/ucb:/bin:/etc:/usr/bin:/usr/etc:/usr/sbin
# Setup default parameters
PrinterName=""
HOSTNAME="" # net install host name
TAPEDEV="/dev/fd0"
REWIND=""
#### directorys ###
ROOT=
CURDIR="`pwd`"
SAVEDIR="`pwd`/SAVED"
## DocuCentre C400 Series
PACKAGE400="uxdriver.tar"
BINDIR400="${ROOT}/usr/local/fxbinC400"
LIBDIR400="${ROOT}/usr/lib/fxpsC400"
ETCDIR400="${ROOT}/usr/local/fxetcC400"
## DocuPrint C2428 Series
PACKAGE2428="uxdriver2.tar"
BINDIR2428="${ROOT}/usr/local/fxbin2428"
LIBDIR2428="${ROOT}/usr/lib/fxps2428"
ETCDIR2428="${ROOT}/usr/local/fxetc2428"
## DocuCentre-II C3000 Series
PACKAGE3000="uxdriver3.tar"
BINDIR3000="${ROOT}/usr/local/fxbin3000"
LIBDIR3000="${ROOT}/usr/lib/fxps3000"
ETCDIR3000="${ROOT}/usr/local/fxetc3000"
##
SAMPLEDIR="${ROOT}/usr/local/fxsrc"
MANDIR="${ROOT}/usr/man/ja_JP.ujis"
MANDIR2="${ROOT}/usr/man/ja_JP.eucJP"
MANDIRF="${ROOT}/usr/share/man/ja"
PRINTCAP="${ROOT}/etc/printcap"
TERMINFO="${ROOT}/usr/share/lib/terminfo"
MODEL_PATH="${ROOT}/usr/lib/lp/model"
ETC="${ROOT}/etc"
RESOURCEDIR="${ROOT}/usr/X11R6/lib/X11/app-defaults"
### utility for installation ###
bins="euc2ps2 fxoption tiff2ps2 xwd2ps2"
libs="fxpof fxoption_exec string_from_printcap fxbanner.ps fxpif_sample.sh"
printcap="printcap.add"
filter="fxpif fxpof fxpvf fxpg4f"
filter_add="A3 A4"
## DocuPrint C400 Series
defaults400=".fxpsdefaultC400"
man1400="euc2psC2400.1 fxoptionC400.1 fxpifC400.1 fxpofC400.1 fxpvfC400.1 fxpg4fC400.1 tiff2ps2C400.1 tiff2g4C400.1 xwd2ps2C400.1 xwd2g4C400.1"
man5400="fxpsdefaultC400.5"
## DocuPrint C2428 Series
defaults2428=".fxpsdefault2428"
man12428="euc2ps22428.1 fxoption2428.1 fxpif2428.1 fxpof2428.1 fxpvf2428.1 fxpg4f2428.1 tiff2ps22428.1 tiff2g42428.1 xwd2ps22428.1 xwd2g42428.1"
man52428="fxpsdefault2428.5"
## DocuCentre-II C3000 Series
defaults3000=".fxpsdefault3000"
man13000="euc2ps23000.1 fxoption3000.1 fxpif3000.1 fxpof3000.1 fxpvf3000.1 fxpg4f3000.1 tiff2ps23000.1 tiff2g43000.1 xwd2ps23000.1 xwd2g43000.1"
man52428="fxpsdefault3000.5"
## GUI Tool
bins_gui="ufptool"
bins_gui5="ufptool5"
bins_gui7="ufptool7"
bins_gui_file=".UFPDefault"
resource_gui_file="Ufptool"
################################
## Printer Model Registration ##
################################
RegisterPrinterModels() {
Model DCC400 FXDCC400.fd "Document Centre C240/C320/C400"
Model DPC2428 FXDPC2428.fd "DocuPrint C2428"
Model DCC450 FXDCC450.fd "Document Centre C450/C360/C250"
Model APC6550 FXAPC6550.fd "ApeosPort C6550 I/C5540 I"
Model DCC6550 FXDCC6550.fd "DocuCentre C6550 I/C5540 I"
Model AP2C4300 FXAP2C4300.fd "ApeosPort-II C4300/C3300/C2200"
Model DC2C4300 FXDC2C4300.fd "DocuCentre-II C4300/C3300/C2200"
Model DC2C3000 FXDC2C3000.fd "DocuCentre-II C3000"
Model AP2C7500 FXAP2C7500.fd "ApeosPort-II C7500/C6500/C5400"
Model DC2C7500 FXDC2C7500.fd "DocuCentre-II C7500/C6500/C5400"
Model AP3C3300 FXAP3C3300.fd "ApeosPort-III C2201/C2200/C3300"
Model DC3C3300 FXDC3C3300.fd "DocuCentre-III C2201/C2200/C3300"
Model AP3C4400 FXAP3C4400.fd "ApeosPort-III C4400"
Model DC3C4400 FXDC3C4400.fd "DocuCentre-III C4400"
Model AP3C7600 FXAP3C7600.fd "ApeosPort-III C7600/C6500/C5500"
Model DC3C7600 FXDC3C7600.fd "DocuCentre-III C7600/C6500/C5500"
Model BinaryInstall2428 dummy2428.fd "Binary update only"
} #EndRegisterPrinterModels
# model_pt<n> ... printer model name
# model_fd<n> ... Solaris FD file name
# model_mn<n> ... menu string
Model() {
[ x"$ModelCount" = x ] && ModelCount=0
eval ModelCount=`expr $ModelCount + 1`
eval model_pt$ModelCount=$1
eval model_fd$ModelCount=$2
eval model_mn$ModelCount="\"$3\""
eval fd_$1=$2
}
## Display Model Selet Menu
ModelSelectMenu() {
echo "Please wait..."
RegisterPrinterModels
clear
echo "$progtitle"
echo "$copyright"
echo ""
echo "Printer Model?"
i=1
tmp=$i
menustr=x
while [ x"$menustr" != xExit ]
do
eval menustr="\"\$model_mn$i\""
[ $i -gt $ModelCount ] && menustr="Exit"
echo " ${i}. $menustr"
[ $i -gt 1 ] && tmp="${tmp}/${i}"
i=`expr $i + 1`
done
i=""
while [ "`expr $i + 0 2>&1`" != "$i" ]
do
echo -n "Enter Process No(${tmp})?:"
read i
done
if [ $i -gt $ModelCount ]
then
EJECT
exit
fi
eval PrinterName=\$model_pt$i
if [ "`P400check`" = "true" ]
then
PACKAGE=$PACKAGE400
BINDIR=$BINDIR400
LIBDIR=$LIBDIR400
defaults=$defaults400
ETCDIR=$ETCDIR400
man1=$man1400
man5=$man5400
elif [ "`P2428check`" = "true" ]
then
PACKAGE=$PACKAGE2428
BINDIR=$BINDIR2428
LIBDIR=$LIBDIR2428
defaults=$defaults2428
ETCDIR=$ETCDIR2428
man1=$man12428
man5=$man52428
elif [ "`P3000check`" = "true" ]
then
PACKAGE=$PACKAGE3000
BINDIR=$BINDIR3000
LIBDIR=$LIBDIR3000
defaults=$defaults3000
ETCDIR=$ETCDIR3000
man1=$man13000
man5=$man53000
fi
}
### DocuPrint C400 Series Check ###
P400check() {
if [ "${PrinterName}" = "DCC400" ]
then
echo "true" # DocuCentre Color 400/320/240/160 Series
else
echo "false" # Not DocuPrint C400 Series
fi
}
### DocuPrint C2428 Series Check ###
P2428check() {
if [ "${PrinterName}" = "DPC2428" ]
then
echo "true" # DocuPrint C2428 Series
elif [ "${PrinterName}" = "DCC450" ]
then
echo "true" # Document Centre C450/C360/C250 Series
elif [ "${PrinterName}" = "APC6550" ]
then
echo "true" # ApeosPort C6550 I/C5540 I Series
elif [ "${PrinterName}" = "DCC6550" ]
then
echo "true" # DocuCentre C6550 I/C5540 I Series
elif [ "${PrinterName}" = "AP2C4300" ]
then
echo "true" # ApeosPort-II C4300/C3300/C2200 Series
elif [ "${PrinterName}" = "DC2C4300" ]
then
echo "true" # DocuCentre-II C4300/C3300/C2200 Series
elif [ "${PrinterName}" = "AP2C7500" ]
then
echo "true" # ApeosPort-II C7500/C6500/C5400 Series
elif [ "${PrinterName}" = "DC2C7500" ]
then
echo "true" # DocuCentre-II C7500/C6500/C5400 Series
elif [ "${PrinterName}" = "AP3C3300" ]
then
echo "true" # ApeosPort-III C2201/C2200/C3300 Series
elif [ "${PrinterName}" = "DC3C3300" ]
then
echo "true" # DocuCentre-III C2201/C2200/C3300 Series
elif [ "${PrinterName}" = "AP3C4400" ]
then
echo "true" # ApeosPort-III C4400 Series
elif [ "${PrinterName}" = "DC3C4400" ]
then
echo "true" # DocuCentre-III C4400 Series
elif [ "${PrinterName}" = "AP3C7600" ]
then
echo "true" # ApeosPort-III C7600/C6500/C5500 Series
elif [ "${PrinterName}" = "DC3C7600" ]
then
echo "true" # DocuCentre-III C7600/C6500/C5500 Series
elif [ "${PrinterName}" = "BinaryInstall2428" ]
then
echo "true" # BinaryInstall
else
echo "false" # Not DocuPrint C2428 Series
fi
}
### DocuCentre-II C3000 Series Check ###
P3000check() {
if [ "${PrinterName}" = "DC2C3000" ]
then
echo "true" # DocuCentre-II C3000 Series
else
echo "false" # Not DocuCentre-II C3000 Series
fi
}
################################
# Local functions
#
### turn off MSI/MailBox/Sorter
CutOff() {
egrep -v 'MSI|m1|m2|m3|m4|m5|m6|m7|m8|m9|m10|Ost' $1
}
### get OS Major Version ###
OSMVersion() {
uname -r | awk '{printf ("%s",1)}'
}
### get OS Version ###
OSVersion() {
uname -r | awk '{printf ("%s",1)}'
}
### nlecho message ###
nlecho() {
echo
echo $*
}
### errorexit exitcode message ###
errorexit() {
nlecho "$progname:$2" 1>&2
${EJECT}
echo
exit $1
}
### readparam message default_value
readparam() {
if [ "$2" = "" ]
then
echo
echo -n "$1:"
read parameter
else
echo
echo -n "$1[$2]:"
read parameter
parameter="${parameter:-$2}"
fi
}
### readenum message default_value
readenum() {
parameter=""
while [ "${parameter}" = "" ]
do
echo
echo -n "$1(1:$2 2:$3):"
read parameter
if [ "${parameter}" = "1" ]
then
parameter="$2"
elif [ "${parameter}" = "2" ]
then
parameter="$3"
else
parameter=""
fi
done
}
### ask 'y' or 'n' ###
YesNo() {
ans=""
case "$2" in
Yes|y)
dmsg="y"
;;
No|n)
dmsg="n"
;;
*)
dmsg=""
;;
esac
while [ "$ans" = "" ]
do
echo
echo -n "$1(y/n)${dmsg:+[$dmsg]}:"
read ans
ans="${ans:-$dmsg}"
if [ "$ans" = "y" -o "$ans" = "n" ]
then
return
fi
echo "You must select 'y' or 'n'."
ans=""
done
}
### Menu ###
Menu() {
n=$#
i=1
tmp=$i
while [ $i -le $n ]
do
echo " ${i}. $1"
if [ $i -gt 1 ]
then
tmp="${tmp}/${i}"
fi
eval param_$i="\"$1\""
shift
i=`expr $i + 1`
done
i=""
while [ "`expr $i + 0 2>&1`" != "$i" ]
do
echo -n "Enter Process No(${tmp})?:"
read i
done
eval ans=\$param_"$i"
return $i
}
### Extract ###
Extract() {
install_directory=$1
shift 1
install_Zfiles=""
install_files=""
for f in $*
do
if ((found "${bins_solaris}" ${f}) && [ "`OSMVersion`" = "5" ])
then
install_Zfiles="${install_Zfiles} ${f}5.Z"
else
install_Zfiles="${install_Zfiles} $f.Z"
fi
install_files="${install_files} $f"
done
${REWIND}
cwd=`pwd`
cd ${CURDIR}
tar xvf ${TAPEDEV} ${install_Zfiles}
for f in ${install_files}
do
gunzip ${f}
install -g bin -o root $f ${install_directory}
/bin/rm ${CURDIR}/$f
done
cd $cwd
}
### filename ###
filename() {
set `echo $1 | sed 's/\// /g'`
shift `expr $# - 1`
echo $1
}
### found ###
found() {
for i in $1
do
if [ "${i}" = $2 ]
then
return 0
fi
done
return 1
}
### keyedit edit_file key addfile saved ###
keyedit() {
echo -n " $1 ... "
RC=255
grep "$2" $1 >/dev/null 2>&1
case "$?" in
0)
echo "already edited."
;;
2)
echo "file not found."
;;
1)
if [ ! -f "$4/`filename $1`" ]
then
cp $1 $4
RC=0
fi
if [ -w $1 ]
then
cat $3 >> $1 2>/dev/null
echo "done"
else
echo "Permission denied."
fi
;;
esac
return ${RC}
}
### read parameter with confirm ###
ReadParamWithConfirm() {
parameter=""
while [ "${parameter}" = "" ]
do
readparam "Enter $1?" "$2"
if [ "$#" = "2" ]
then
YesNo "$1 is '${parameter}'" "y"
if [ "$ans" = "n" ]
then
parameter=""
fi
elif [ $3 ${parameter} ]
then
parameter=""
fi
done
}
### read printer name with confirm ###
ReadPrinterNameWithConfirm() {
parameter=""
while [ "${parameter}" = "" ]
do
readparam "Enter $1?" "$2"
if (echo ${parameter} | grep "[^a-zA-Z0-9_]")
then
echo "$1 can only contain alphanumeric characters and underscores"
parameter=""
else
if [ "`echo -n ${parameter} | wc -c`" -le 14 ]
then
YesNo "$1 is '${parameter}'" "y"
if [ "$ans" = "n" ]
then
parameter=""
fi
else
echo "$1 exceeds 14 characters"
parameter=""
fi
fi
done
}
##
mk_LIBDIR() {
### disk free space check
df
echo
echo "This Software requires at least 20MB disk space."
echo "Enter a new directory at the following prompt,if you want change the path."
LINKDIR=""
WORKPARAM=""
OK="n"
while [ "${LINKDIR}" = "" ]
do
while [ "${OK}" = "n" ]
do
readparam "Enter directory name" "${LIBDIR}"
if [ `expr substr ${parameter} 1 1` != "/" ]
then
YesNo "directory is '`pwd`/${parameter}' " n
WORKPARAM="`pwd`/${parameter}"
else
YesNo "directory is '${parameter}' " n
WORKPARAM="${parameter}"
fi
OK=${ans}
done
LINKDIR="${WORKPARAM}"
if [ -d ${LINKDIR} ]
then
echo "'${LINKDIR}' already exists."
YesNo "Erase ${libs} ${defaults} in '${LINKDIR}'. Confirm?" n
if [ "$ans" = "y" ]
then
dir=`pwd`
echo -n "'delete..."
cd ${LINKDIR}
rm -rf ${libs} UserDefault/${defaults}
cd ${dir}
echo "done"
#else
# LINKDIR=""
fi
fi
done
if [ "${LINKDIR}" != "${LIBDIR}" ]
then
mkdir ${LINKDIR}
ln -s ${LINKDIR} ${LIBDIR}
else
[ ! -d $LIBDIR ] && mkdir $LIBDIR
fi
set `df ${LIBDIR} | grep -v Filesystem` # RedHat8 Âбþ
FREE="$4"
FILESYS="$6"
if [ ${FREE:=0} -lt 1024 ]
then
nlecho "Not enough space in '${FILESYS}' file system."
rm -rf ${LIBDIR} ${LINKDIR}
errorexit 255 "Installation aborted."
fi
}
### Make binary install directry
mk_BINDIR() {
LINKBDIR=""
WORKPARAM=""
OK="n"
while [ "${LINKBDIR}" = "" ]
do
while [ "${OK}" = "n" ]
do
readparam "Enter binary directory name" "${BINDIR}"
if [ `expr substr ${parameter} 1 1` != "/" ]
then
YesNo "directory is '`pwd`/${parameter}' " n
WORKPARAM="`pwd`/${parameter}"
else
YesNo "directory is '${parameter}' " n
WORKPARAM="${parameter}"
fi
OK=${ans}
done
LINKBDIR="${WORKPARAM}"
if [ -d ${LINKBDIR} ]
then
echo "'${LINKBDIR}' already exists."
YesNo "Erase ${bins_solaris} ${bins_gui} in '${LINKBDIR}'. Confirm?" n
if [ "$ans" = "y" ]
then
dir=`pwd`
echo -n "'delete..."
cd ${LINKBDIR}
rm -rf ${bins_solaris} ${bins_gui}
cd ${dir}
echo "done"
fi
fi
if [ -d ${LINKBDIR}/UFPDefault ]
then
echo "'${LINKBDIR}/UFPDefault' already exists."
YesNo "Erase ${bins_gui_file} in '${LINKBDIR}/UFPDefault'. Confirm?" n
if [ "$ans" = "y" ]
then
dir=`pwd`
echo -n "'delete..."
cd ${LINKBDIR}
rm -rf ${bins_gui_file}
cd ${dir}
echo "done"
fi
fi
done
if [ "${LINKBDIR}" != "${BINDIR}" ]
then
mkdir ${LINKBDIR}
BINDIR="${LINKBDIR}"
else
[ ! -d $BINDIR ] && mkdir $BINDIR
fi
set `df ${BINDIR} | grep -v Filesystem` # RedHat8 Âбþ
FREE="$4"
FILESYS="$6"
if [ ${FREE:=0} -lt 5120 ]
then
nlecho "Not enough space in '${FILESYS}' file system."
rm -rf ${LINKBDIR}
errorexit 255 "Installation aborted."
fi
}
#Clean library install directory for binary update
mk_UD_LIBDIR() {
### disk free space check
echo "Enter library and binary installed directory."
LINKDIR=""
OK="n"
while [ "${LINKDIR}" = "" ]
do
while [ "${OK}" = "n" ]
do
readparam "Enter library directory name" "${LIBDIR}"
if [ `expr substr ${parameter} 1 1` != "/" ]
then
YesNo "directory is '`pwd`/${parameter}' " n
else
YesNo "directory is '${parameter}' " n
fi
OK=${ans}
done
LINKDIR="${parameter}"
if [ -d ${LINKDIR} ]
then
dir=`pwd`
echo -n "'Delete all old library files..."
cd ${LINKDIR}
rm -rf ${libs}
cd ${dir}
echo "done"
else
echo "Directory not found."
echo "Binary update give up."
exit 255
fi
done
}
#Clean binary install directory for binary update
mk_UD_BINDIR() {
LINKBDIR=""
WORKPARAM=""
OK="n"
while [ "${LINKBDIR}" = "" ]
do
while [ "${OK}" = "n" ]
do
readparam "Enter binary directory name" "${BINDIR}"
if [ `expr substr ${parameter} 1 1` != "/" ]
then
YesNo "directory is '`pwd`/${parameter}' " n
WORKPARAM="`pwd`/${parameter}"
else
YesNo "directory is '${parameter}' " n
WORKPARAM="${parameter}"
fi
OK=${ans}
done
LINKBDIR="${WORKPARAM}"
if [ -d ${LINKBDIR} ]
then
dir=`pwd`
echo -n "'Delete all old binary files..."
cd ${LINKBDIR}
rm -rf ${bins}
rm -rf ${bins_gui}
cd ${dir}
else
echo "Directory not found."
echo "Binary update give up."
exit 255
fi
if [ -d ${LINKBDIR}/UFPDefault ]
then
dir=`pwd`
cd ${LINKBDIR}
rm -rf ${bins_gui_file}
cd ${dir}
echo "done"
fi
done
}
#Make etc install directry
mk_ETCDIR() {
LINKEDIR=""
WORKPARAM=""
OK="n"
while [ "${LINKEDIR}" = "" ]
do
while [ "${OK}" = "n" ]
do
readparam "Enter etc directory name" "${ETCDIR}"
if [ `expr substr ${parameter} 1 1` != "/" ]
then
YesNo "directory is '`pwd`/${parameter}' " n
WORKPARAM="`pwd`/${parameter}"
else
YesNo "directory is '${parameter}' " n
WORKPARAM="${parameter}"
fi
OK=${ans}
done
LINKEDIR="${WORKPARAM}"
if [ -d ${LINKEDIR} ]
then
echo "'${LINKEDIR}' already exists."
YesNo "Erase ${printcap} in '${LINKEDIR}'. Confirm?" n
if [ "$ans" = "y" ]
then
dir=`pwd`
echo -n "'delete..."
cd ${LINKEDIR}
rm -rf ${printcap}
cd ${dir}
echo "done"
fi
fi
done
if [ "${LINKEDIR}" != "${ETCDIR}" ]
then
mkdir ${LINKEDIR}
ETCDIR="${LINKEDIR}"
else
[ ! -d $ETCDIR ] && mkdir $ETCDIR
fi
set `df ${ETCDIR} | grep -v Filesystem` # RedHat8 Âбþ
FREE="$4"
FILESYS="$6"
if [ ${FREE:=0} -lt 6144 ]
then
nlecho "Not enough space in '${FILESYS}' file system."
rm -rf ${LINKEDIR}
errorexit 255 "Installation aborted."
fi
}
### do symbolic link ###
LN_S() {
[ -f $2 ] && rm -f $2 # remove, if $2 already exists.
ln -s $1 $2
}
### do hard link ###
LN_H() {
[ -f $2 ] && rm -f $2 # remove, if $2 already exists.
ln $1 $2
}
### Linux Install ###
Linux_Install() {
YesNo "Install Filters?" "y"
if [ "$ans" = "y" ]
then
mk_LIBDIR
mk_BINDIR
mk_ETCDIR
install -d -m 755 ${BINDIR}
install -d -m 755 ${LIBDIR}
install -d -m 755 ${LIBDIR}/UserDefault
install -d -m 755 ${ETCDIR}
install -d -m 755 ${BINDIR}/UFPDefault
Extract ${LIBDIR} ${libs}
Extract ${LIBDIR}/UserDefault ${defaults}
Extract ${BINDIR} ${bins}
RVER=`uname -r | awk '{printf ("%s",substr($1,5,2))}'`
MVER=`uname -r | awk '{printf ("%s",substr($1,3,1))}'`
eval MNUM=\$MVER #MinerVersion
eval RNUM=\$RVER #Revision
#if Kernel Ver 2.0.xx
if [ 0 -eq $MNUM ]
then
#if Kernel Ver 2.0.36 upper
if [ 35 -lt $RNUM ]
then
tar xvf ${TAPEDEV} ${bins_gui5}.Z
gunzip ${bins_gui5}.Z
install -g bin -o root ${bins_gui5} ${BINDIR}/${bins_gui}
/bin/rm ${CURDIR}/${bins_gui5}
else
Extract ${BINDIR} ${bins_gui}
fi
#if Kernel Ver 2.2.xx
elif [ 2 -eq $MNUM ]
then
GMVER=`rpm -q glibc | awk '{printf ("%s",substr($1,9,1))}'`
GRVERT=`rpm -q glibc | awk '{printf ("%s",substr($1,12,1))}'`
if [ "-" == $GRVERT ]
then
GRVER=`rpm -q glibc | awk '{printf ("%s",substr($1,11,1))}'`
else
GRVER=`rpm -q glibc | awk '{printf ("%s",substr($1,11,2))}'`
fi
eval GMNUM=\$GMVER
eval GRNUM=\$GRVER
#if glibc Ver 2.2.xx
if [ 2 -eq $GMNUM ]
then
tar xvf ${TAPEDEV} ${bins_gui7}.Z
gunzip ${bins_gui7}.Z
install -g bin -o root ${bins_gui7} ${BINDIR}/${bins_gui}
rm ${CURDIR}/${bins_gui7}
#if glibc Ver 2.1.95 upper
elif [ 94 -lt $GRNUM ]
then
tar xvf ${TAPEDEV} ${bins_gui7}.Z
gunzip ${bins_gui7}.Z
install -g bin -o root ${bins_gui7} ${BINDIR}/${bins_gui}
rm ${CURDIR}/${bins_gui7}
else
tar xvf ${TAPEDEV} ${bins_gui5}.Z
gunzip ${bins_gui5}.Z
install -g bin -o root ${bins_gui5} ${BINDIR}/${bins_gui}
/bin/rm ${CURDIR}/${bins_gui5}
fi
#if Kernel Ver 2.x.xx
else
GMVER=`rpm -q glibc | awk '{printf ("%s",substr($1,9,1))}'`
eval GMNUM=\$GMVER
#if glibc Ver 2.1.xx
if [ 1 -eq $GMNUM ]
then
tar xvf ${TAPEDEV} ${bins_gui5}.Z
gunzip ${bins_gui5}.Z
install -g bin -o root ${bins_gui5} ${BINDIR}/${bins_gui}
/bin/rm ${CURDIR}/${bins_gui5}
#if glibc Ver 2.2.xx upper
else
tar xvf ${TAPEDEV} ${bins_gui7}.Z
gunzip ${bins_gui7}.Z
install -g bin -o root ${bins_gui7} ${BINDIR}/${bins_gui}
rm ${CURDIR}/${bins_gui7}
fi
fi
Extract ${BINDIR}/UFPDefault ${bins_gui_file}
Extract ${RESOURCEDIR} ${resource_gui_file}
Extract ${ETCDIR} ${printcap}
# if [ -d ${MANDIRF} ]
# then
# MANDIR="${MANDIRF}"
# elif [ -d ${MANDIR2} ]
# then
# LN_S ${MANDIR2} ${MANDIR}
# fi
# Extract ${MANDIR}/man1 ${man1}
# Extract ${MANDIR}/man5 ${man5}
## compatibility
# if [ "`P400check`" = "true" ]
# then
# cd $MANDIR/man5
# LN_S fxpsdefault400.5 .fxpsdefault400.5
# elif [ "`P2428check`" = "true" ]
# then
# cd $MANDIR/man5
# LN_S fxpsdefault2428.5 .fxpsdefault2428.5
# else
# cd $MANDIR/man5
# LN_S fxpsdefault1250.5 .fxpsdefault1250.5
# fi
# do binary hard link
LN_H ${BINDIR}/euc2ps2 ${LIBDIR}/fxpif
LN_H ${BINDIR}/xwd2ps2 ${LIBDIR}/fxpvf
LN_H ${BINDIR}/xwd2ps2 ${LIBDIR}/fxpg4f
LN_H ${BINDIR}/xwd2ps2 ${BINDIR}/xwd2g4
LN_H ${BINDIR}/tiff2ps2 ${BINDIR}/tiff2g4
cd ${LIBDIR}
for i in ${filter_add}
do
for j in ${filter}
do
LN_S ${j} ${j}_${i}
done
done
echo
echo "*** Editing ${PrinterName} Enviroment files. ***"
echo
if [ "`P400check`" = "true" ]
then
MTYPE="C400"
elif [ "`P2428check`" = "true" ]
then
MTYPE="2428"
elif [ "`P3000check`" = "true" ]
then
MTYPE="3000"
fi
if keyedit ${PRINTCAP} fxps${MTYPE}/fxpif ${ETCDIR}/${printcap} ${SAVEDIR}
then
SAVE_FILES="${SAVE_FILES} ${PRINTCAP}"
fi
echo "${BINDIR}" > /tmp/fxbinpath${MTYPE}
install -g bin -o root /tmp/fxbinpath${MTYPE} ${LIBDIR}
rm -f /tmp/fxbinpath${MTYPE}
fi
echo
if [ "${SAVE_FILES}" ]
then
echo ${SAVE_FILES} | tr -s ' ' '\012'
echo "Original files is saved in '${SAVEDIR}'."
else
rm -r ${SAVEDIR}
fi
}
### Linux Binary Install ###
Linux_BinaryInstall() {
YesNo "Update Binaries?" "y"
if [ "$ans" = "y" ]
then
mk_UD_LIBDIR
mk_UD_BINDIR
install -d -m 755 ${BINDIR}
install -d -m 755 ${BINDIR}/UFPDefault
install -d -m 755 ${LIBDIR}
Extract ${LIBDIR} ${libs}
Extract ${BINDIR} ${bins}
RVER=`uname -r | awk '{printf ("%s",substr($1,5,2))}'`
MVER=`uname -r | awk '{printf ("%s",substr($1,3,1))}'`
eval MNUM=\$MVER #MinerVersion
eval RNUM=\$RVER #Revision
#if Kernel Ver 2.0.xx
if [ 0 -eq $MNUM ]
then
#if Kernel Ver 2.0.36 upper
if [ 35 -lt $RNUM ]
then
tar xvf ${TAPEDEV} ${bins_gui5}.Z
uncompress ${bins_gui5}.Z
install -g bin -o root ${bins_gui5} ${BINDIR}/${bins_gui}
/bin/rm ${CURDIR}/${bins_gui5}
else
Extract ${BINDIR} ${bins_gui}
fi
#if Kernel Ver 2.2.xx
elif [ 2 -eq $MNUM ]
then
GMVER=`rpm -q glibc | awk '{printf ("%s",substr($1,9,1))}'`
GRVERT=`rpm -q glibc | awk '{printf ("%s",substr($1,12,1))}'`
if [ "-" == $GRVERT ]
then
GRVER=`rpm -q glibc | awk '{printf ("%s",substr($1,11,1))}'`
else
GRVER=`rpm -q glibc | awk '{printf ("%s",substr($1,11,2))}'`
fi
eval GMNUM=\$GMVER
eval GRNUM=\$GRVER
#if glibc Ver 2.2.xx
if [ 2 -eq $GMNUM ]
then
tar xvf ${TAPEDEV} ${bins_gui7}.Z
uncompress ${bins_gui7}.Z
install -g bin -o root ${bins_gui7} ${BINDIR}/${bins_gui}
rm ${CURDIR}/${bins_gui7}
#if glibc Ver 2.1.95 upper
elif [ 94 -lt $GRNUM ]
then
tar xvf ${TAPEDEV} ${bins_gui7}.Z
uncompress ${bins_gui7}.Z
install -g bin -o root ${bins_gui7} ${BINDIR}/${bins_gui}
rm ${CURDIR}/${bins_gui7}
else
tar xvf ${TAPEDEV} ${bins_gui5}.Z
uncompress ${bins_gui5}.Z
install -g bin -o root ${bins_gui5} ${BINDIR}/${bins_gui}
/bin/rm ${CURDIR}/${bins_gui5}
fi
#if Kernel Ver 2.x.xx
else
GMVER=`rpm -q glibc | awk '{printf ("%s",substr($1,9,1))}'`
eval GMNUM=\$GMVER
#if glibc Ver 2.1.xx
if [ 1 -eq $GMNUM ]
then
tar xvf ${TAPEDEV} ${bins_gui5}.Z
uncompress ${bins_gui5}.Z
install -g bin -o root ${bins_gui5} ${BINDIR}/${bins_gui}
/bin/rm ${CURDIR}/${bins_gui5}
#if glibc Ver 2.2.xx upper
else
tar xvf ${TAPEDEV} ${bins_gui7}.Z
uncompress ${bins_gui7}.Z
install -g bin -o root ${bins_gui7} ${BINDIR}/${bins_gui}
rm ${CURDIR}/${bins_gui7}
fi
fi
Extract ${BINDIR}/UFPDefault ${bins_gui_file}
Extract ${RESOURCEDIR} ${resource_gui_file}
# if [ -d ${MANDIRF} ]
# then
# MANDIR="${MANDIRF}"
# elif [ -d ${MANDIR2} ]
# then
# LN_S ${MANDIR2} ${MANDIR}
# fi
# Extract ${MANDIR}/man1 ${man1}
# Extract ${MANDIR}/man5 ${man5}
## compatibility
# if [ "`P3530check`" = "true" ]
# then
# cd $MANDIR/man5
# LN_S fxpsdefault3320.5 .fxpsdefault3320.5
# elif [ "`P2220check`" = "true" ]
# then
# cd $MANDIR/man5
# LN_S fxpsdefault2220.5 .fxpsdefault2220.5
# elif [ "`P3530check`" = "true" ]
# then
# cd $MANDIR/man5
# LN_S fxpsdefault3530.5 .fxpsdefault3530.5
# else
# cd $MANDIR/man5
# LN_S fxpsdefault1250.5 .fxpsdefault1250.5
# fi
# do binary hard link
LN_H ${BINDIR}/euc2ps2 ${LIBDIR}/fxpif
LN_H ${BINDIR}/xwd2ps2 ${LIBDIR}/fxpvf
LN_H ${BINDIR}/xwd2ps2 ${LIBDIR}/fxpg4f
LN_H ${BINDIR}/xwd2ps2 ${BINDIR}/xwd2g4
LN_H ${BINDIR}/tiff2ps2 ${BINDIR}/tiff2g4
cd ${LIBDIR}
for i in ${filter_add}
do
for j in ${filter}
do
LN_S ${j} ${j}_${i}
done
done
if [ "`P400check`" = "true" ]
then
MTYPE="C400"
elif [ "`P2428check`" = "true" ]
then
MTYPE="2428"
elif [ "`P3000check`" = "true" ]
then
MTYPE="3000"
fi
echo "${BINDIR}" > /tmp/fxbinpath${MTYPE}
install -g bin -o root /tmp/fxbinpath${MTYPE} ${LIBDIR}
rm -f /tmp/fxbinpath${MTYPE}
fi
}
### Eject floppy ###
EJECT() {
echo
}
##
setup_tapedevice() {
if [ $?PACKAGE ]
then
if [ -f $PACKAGE ]
then
TAPEDEV=$PACKAGE
else
echo
echo "Extracting a package, please wait..."
tar xf $TAPEDEV $PACKAGE 2>&1 >/dev/null
[ -f $PACKAGE ] && TAPEDEV=$PACKAGE
fi
fi # if no package found, old version of Unix Filter
}
################################
# START Installation Here
################################
#/usr/ucb/clear
if [ "`whoami`" != "root" ]
then
errorexit 255 "should be used by 'root'."
fi
if [ ! -d ${SAVEDIR} ]
then
mkdir ${SAVEDIR}
fi
SAVE_FILES=""
ModelSelectMenu
setup_tapedevice
if [ ! -d ${ETC} ]
then
mkdir ${ETC}
fi
if [ ! -f ${PRINTCAP} ]
then
Extract ${ETC} printcap_hed
cd /etc
mv printcap_hed printcap
chmod 644 printcap
fi
if [ ! "$PrinterName" = "BinaryInstall2428" ]; then
Linux_Install
else
Linux_BinaryInstall
fi
awk -F : '{print $1 " " $6}' /etc/passwd > ${LIBDIR}/UserDefault/.userhomedir
chmod 755 ${LIBDIR}/UserDefault/.userhomedir
##[ -f $PACKAGE ] && rm -f $PACKAGE
echo ""
echo "done."
##EJECT
##### END-OF-INSTALL #####
How to get a Fuji Xerox ApeosPort-III printer to work?
Adv Reply
Bookmarks