Results 1 to 1 of 1

Thread: VPNC Nightmares

  1. #1
    Join Date
    Jun 2015
    Beans
    1

    VPNC Nightmares

    So I have been trying on and off for 2 months to get my VPNC clients working on ubuntu, but no such luck. I run a Ipsec Xauth VPN server for around 30 clients. OSX, Windows, iOS and Android all connect fine, however trying to connect ubuntu is not working.

    So here is the VPNC configuration exported by the VPN server (and the config file Windows machine use)

    Code:
    n:version:2 
    s:network-host:000.000.000.000 
    n:network-ike-port:500 
    s:client-auto-mode:pull 
    s:client-iface:virtual 
    n:client-addr-auto:1 
    n:network-mtu-size:1380 
    s:network-natt-mode:enable 
    n:network-natt-port:4500 
    n:network-natt-rate:20 
    s:network-frag-mode:disable 
    n:network-dpd-enable:1 
    n:network-notify-enable:1 
    n:client-banner-enable:0 
    n:client-wins-used:1 
    n:client-wins-auto:1 
    n:client-dns-used:1 
    n:client-dns-auto:1 
    n:client-splitdns-used:1 
    n:client-splitdns-auto:1 
    s:auth-method:mutual-psk-xauth 
    b:auth-mutual-psk:PSKGOESHERE 
    s:ident-client-type:ufqdn 
    s:ident-client-data:IpsecVPN 
    s:ident-server-type:any 
    s:phase1-exchange:aggressive 
    s:phase1-cipher:3des 
    s:phase1-hash:sha1 
    n:phase1-dhgroup:1 
    n:phase1-life-secs:86400 
    n:vendor-chkpt-enable:0 
    s:phase2-transform:esp-aes 
    n:phase2-keylen:256 
    s:phase2-hmac:sha1 
    n:phase2-pfsgroup:1 
    n:phase2-life-secs:28800 
    n:phase2-life-kbytes:128000 
    s:ipcomp-transform:disabled 
    s:policy-level:auto 
    n:policy-nailed:0 
    n:policy-list-auto:1
    And here is my vpnc.conf
    Code:
    IPSec gateway 000.000.000.000
    IPSec ID IpsecVPN
    IPSec secret PSKHERE
    IKE Authmode psk
    Xauth username luke
    Xauth password PASSWORD
    I first tried connecting with

    Code:
    luke@xps:~$ sudo vpnc --local-port 0
    vpnc: xauth SET message rejected:  (ISAKMP_N_INVALID_PAYLOAD_TYPE)(1)
    Debug logs: https://gist.github.com/crooksey/8efa6e90550b62062498


    If have added a full debug print for both above commands to my post (using external gist link as to large to attach), I would really appreciate please help me as this is driving me crazy!
    Last edited by luke_3; June 18th, 2015 at 01:42 PM. Reason: Closing a tag

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •