Results 1 to 2 of 2

Thread: P2V Failed (Error message attached)

  1. #1
    Join Date
    Feb 2014

    P2V Failed (Error message attached)

    Hi there
    I want to convert physical Ubuntu 12.04 to a virtual server using VMware converter 5.5.2

    you can see in the following image the hard disk settings for the physical server in the conversion wizard

    after the conversion complete I tried to power up the converted one but this is what I got

    Would you please advise me how to fix it
    Thank you
    Last edited by shadin2; August 25th, 2014 at 09:17 AM.

  2. #2
    Join Date
    Sep 2012
    North West England, UK
    Ubuntu Gnome 17.04 Zesty Zapus

    Re: P2V Failed (Error message attached)

    Doesn't necessarily look like your P2V has're at an EFI Shell which is asking you to point to the efi bootloader for the OS. The default path for Ubuntu's efi (at least on mine its the default) is /boot/efi/EFI/ubuntu/grubx64.efi, you should be able to browse to the same file on your install via the shell and execute the efi which should start the OS. If you put the /boot mount in a different partition on the physical disk then you'll need to find the correct device mapping to use in the shell e.g. blk0...blk4

    Permanent fixes for this are possible by editing the EFI to point to the grubx64.efi, couple of ways to do this but in a virtual image I've less experience however one way would be to edit the startup.nsh file the shell itself is referring to and adding the path to grubx64.efi.

    Alternatively if the physical was a legacy boot from BIOS you may not have a grubx86.efi, so disable the EFI option in the VM guest config.

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts