Code:
# sensors-detect revision 6170 (2013-05-20 21:25:22 +0200)
# System: MSI MS-7640 [3.0]
# Board: MSI 990FXA-GD65 (MS-7640)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... Success!
(driver `k10temp')
AMD Family 15h power sensors... Success!
(driver `fam15h_power')
AMD Family 16h power sensors... No
Intel digital thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no): Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... Yes
Found `Fintek F71889A Super IO Sensors' Success!
(address 0x480, driver `f71882fg')
Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no): Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (yes/NO): Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no): Using driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc SB600/SB700/SB800 SMBus
Module i2c-dev loaded successfully.
Next adapter: SMBus PIIX4 adapter at 0b00 (i2c-0)
Do you want to scan it? (yes/NO/selectively): Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'... No
Client found at address 0x51
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Next adapter: SMBus PIIX4 adapter at 0b20 (i2c-1)
Do you want to scan it? (yes/NO/selectively):
Next adapter: NVIDIA i2c adapter 0 at 1:00.0 (i2c-2)
Do you want to scan it? (yes/NO/selectively):
Next adapter: NVIDIA i2c adapter 1 at 1:00.0 (i2c-3)
Do you want to scan it? (yes/NO/selectively):
Next adapter: NVIDIA i2c adapter 2 at 1:00.0 (i2c-4)
Do you want to scan it? (yes/NO/selectively):
Next adapter: NVIDIA i2c adapter 6 at 1:00.0 (i2c-5)
Do you want to scan it? (yes/NO/selectively): Client found at address 0x4a
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410/ADT7420'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Maxim MAX6642'... No
Probing for `National Semiconductor LM73'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Client found at address 0x4b
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410/ADT7420'... No
Probing for `Analog Devices ADT7411'... No
Probing for `Maxim MAX6642'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Probing for `Analog Devices ADT7481'... No
Next adapter: NVIDIA i2c adapter 7 at 1:00.0 (i2c-6)
Do you want to scan it? (yes/NO/selectively):
Next adapter: NVIDIA i2c adapter 8 at 1:00.0 (i2c-7)
Do you want to scan it? (yes/NO/selectively):
Next adapter: NVIDIA i2c adapter 11 at 1:00.0 (i2c-8)
Do you want to scan it? (yes/NO/selectively): Adapter cannot be probed, skipping.
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `k10temp' (autoloaded):
* Chip `AMD Family 15h thermal sensors' (confidence: 9)
Driver `fam15h_power' (autoloaded):
* Chip `AMD Family 15h power sensors' (confidence: 9)
Driver `f71882fg':
* ISA bus, address 0x480
Chip `Fintek F71889A Super IO Sensors' (confidence: 9)
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
f71882fg
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!
Do you want to add these lines automatically to /etc/modules? (yes/NO)Successful!
Monitoring programs won't work until the needed modules are
loaded. You may want to run 'service kmod start'
to load them.
Unloading i2c-dev... OK
Unloading cpuid... OK
and after that i type sensors
Code:
koiv@koiv:~$ sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +5.8°C (high = +70.0°C)
(crit = +90.0°C, hyst = +87.0°C)
fam15h_power-pci-00c4
Adapter: PCI adapter
power1: 77.56 W (crit = 219.76 W)
f71889a-isa-0480
Adapter: ISA adapter
+3.3V: +3.30 V
in1: +1.11 V (max = +2.04 V)
in2: +1.50 V
in3: +0.95 V
in4: +1.08 V
in5: +1.09 V
in6: +1.14 V
3VSB: +3.31 V
Vbat: +3.28 V
fan1: 2400 RPM
fan2: 0 RPM ALARM
fan3: 1236 RPM
temp1: +36.0°C (high = +85.0°C, hyst = +81.0°C)
(crit = +100.0°C, hyst = +96.0°C) sensor = transistor
temp2: +46.0°C (high = +85.0°C, hyst = +79.0°C)
(crit = +107.0°C, hyst = +101.0°C) sensor = thermistor
temp3: +32.0°C (high = +70.0°C, hyst = +68.0°C)
(crit = +85.0°C, hyst = +83.0°C) sensor = transistor
how to know cpu core temp?
It should display something like:
Code:
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +46.0C (high = +76.0C, crit = +100.0C)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +44.0C (high = +76.0C, crit = +100.0C)
…
System Hardware:
Processor: AMD FX-9590 Eight-Core @ 4.70GHz (8 Cores), Motherboard: MSI 990FXA-GD65 (MS-7640) v3.0, Chipset: AMD RD890 bridge, Memory: 16384MB, Disk: 128GB Corsair Force GS + 2000GB Western Digital WD20EZRX-00D, Graphics: MSI NVIDIA GeForce GTX 760 2048MB (540/3004MHz), Audio: Realtek ALC892, Monitor: LG E2250, Network: Realtek RTL8111/8168/8411
Software:
OS: Ubuntu 14.04, Kernel: 3.13.0-36-generic (x86_64), Desktop: Unity 7.2.2, Display Server: X Server 1.15.1, Display Driver: NVIDIA 331.38, Compiler: GCC 4.8.2, File-System: ext4, Screen Resolution: 1920x1080
Bookmarks