Results 1 to 5 of 5

Thread: MSI B75IA-E33 - 13.04 (x86) Unable to power off past shutdown.

  1. #1
    Join Date
    Feb 2014
    Beans
    4

    MSI B75IA-E33 - 13.04 (x86) Unable to power off past shutdown.

    Hi,

    I have installed Ubuntu 13.04 x86 on MSI B75IA-E33 as HTPC running XBMC. Everything is fine, just that when the system is shutdown it won't power off. But if I can the power button hold down, then it will power off. I have tried with acpi=force and apm=on in the grub with no result. Any advise?

    Also, I am not sure if relevant, but this board is powered vi : M2-ATX-HV, 140w output, 6v to 32v wide input Intelligent Automotive DC-DC Car PC Power Supply

    Thanks.
    +LT
    Last edited by myself-x; February 22nd, 2014 at 11:54 AM.

  2. #2
    Join Date
    Feb 2014
    Beans
    4

    Re: MSI B75IA-E33 - 13.04 (x86) Unable to power off past shutdown.

    Dmesg:

    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.8.0-19-generic (buildd@roseapple) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #30-Ubuntu SMP Wed May 1 16:36:13 UTC 2013 (Ubuntu 3.8.0-19.30-generic 3.8.8)
    [ 0.000000] KERNEL supported cpus:
    [ 0.000000] Intel GenuineIntel
    [ 0.000000] AMD AuthenticAMD
    [ 0.000000] NSC Geode by NSC
    [ 0.000000] Cyrix CyrixInstead
    [ 0.000000] Centaur CentaurHauls
    [ 0.000000] Transmeta GenuineTMx86
    [ 0.000000] Transmeta TransmetaCPU
    [ 0.000000] UMC UMC UMC UMC
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x0000000076e87fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000076e88000-0x0000000077307fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000077308000-0x000000007741cfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000007741d000-0x00000000785d2fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000785d3000-0x00000000785d3fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000785d4000-0x0000000078616fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x0000000078617000-0x0000000078a32fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000078a33000-0x0000000078ff3fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000078ff4000-0x0000000078ffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000079800000-0x000000007d9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: MSI MS-7733/B75IA-E33 (MS-7733), BIOS V17.0 07/30/2012
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x1000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 100000000 mask FFFC00000 write-back
    [ 0.000000] 2 base 100400000 mask FFFE00000 write-back
    [ 0.000000] 3 base 080000000 mask F80000000 uncachable
    [ 0.000000] 4 base 07C000000 mask FFC000000 uncachable
    [ 0.000000] 5 base 07A000000 mask FFE000000 uncachable
    [ 0.000000] 6 base 079800000 mask FFF800000 uncachable
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] original variable MTRRs
    [ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
    [ 0.000000] reg 1, base: 4GB, range: 4MB, type WB
    [ 0.000000] reg 2, base: 4100MB, range: 2MB, type WB
    [ 0.000000] reg 3, base: 2GB, range: 2GB, type UC
    [ 0.000000] reg 4, base: 1984MB, range: 64MB, type UC
    [ 0.000000] reg 5, base: 1952MB, range: 32MB, type UC
    [ 0.000000] reg 6, base: 1944MB, range: 8MB, type UC
    [ 0.000000] total RAM covered: 1950M
    [ 0.000000] Found optimal setting for mtrr clean up
    [ 0.000000] gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G
    [ 0.000000] New variable MTRRs
    [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
    [ 0.000000] reg 1, base: 1944MB, range: 8MB, type UC
    [ 0.000000] reg 2, base: 1952MB, range: 32MB, type UC
    [ 0.000000] reg 3, base: 1984MB, range: 64MB, type UC
    [ 0.000000] reg 4, base: 4GB, range: 4MB, type WB
    [ 0.000000] reg 5, base: 4100MB, range: 2MB, type WB
    [ 0.000000] e820: update [mem 0x79800000-0xffffffff] usable ==> reserved
    [ 0.000000] found SMP MP-table at [mem 0x000fd720-0x000fd72f] mapped at [c00fd720]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
    [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
    [ 0.000000] [mem 0x00000000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x379fffff] page 2M
    [ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
    [ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
    [ 0.000000] RAMDISK: [mem 0x346f2000-0x36370fff]
    [ 0.000000] ACPI: RSDP 000f0490 00024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 7740e078 00074 (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 77417a50 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 7740e188 098C8 (v02 ALASKA A M I 00000021 INTL 20051117)
    [ 0.000000] ACPI: FACS 7741b080 00040
    [ 0.000000] ACPI: APIC 77417b60 00062 (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 77417bc8 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 77417c10 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 77417c50 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 77417c88 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 77417ff8 00926 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.000000] ACPI: SSDT 77418920 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
    [ 0.000000] ACPI: ASF! 774193b8 000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: BGRT 77419460 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 3210MB HIGHMEM available.
    [ 0.000000] 891MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 37bfe000
    [ 0.000000] low ram: 0 - 37bfe000
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
    [ 0.000000] HighMem [mem 0x37bfe000-0x005fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20200000-0x40003fff]
    [ 0.000000] node 0: [mem 0x40005000-0x76e87fff]
    [ 0.000000] node 0: [mem 0x785d3000-0x785d3fff]
    [ 0.000000] node 0: [mem 0x78617000-0x78a32fff]
    [ 0.000000] node 0: [mem 0x78ff4000-0x78ffffff]
    [ 0.000000] node 0: [mem 0x00000000-0x005fffff]
    [ 0.000000] On node 0 totalpages: 489021
    [ 0.000000] free_area_init_node: node 0, pgdat c18f6100, node_mem_map f26e2200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3949 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1752 pages used for memmap
    [ 0.000000] Normal zone: 221990 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 6421 pages used for memmap
    [ 0.000000] HighMem zone: 254877 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
    [ 0.000000] e820: [mem 0x7da00000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bce000 s35008 r0 d22336 u57344
    [ 0.000000] pcpu-alloc: s35008 r0 d22336 u57344 alloc=14*4096
    [ 0.000000] pcpu-alloc: [0] 0 [0] 1
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 480816
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=3407b0ea-93da-4696-8abc-b85bddcc4e96 ro acpi=force apm=on quiet splash init=/sbin/e4rat-preload video=uvesafb:mode_option=1366x768-24,mtrr=3,scroll=ywrap vt.handoff=7
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] allocated 8400768 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (00037bfe:00100600)
    [ 0.000000] Memory: 1873892k/4200448k available (6251k kernel code, 82192k reserved, 2973k data, 784k init, 1045192k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
    [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
    [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
    [ 0.000000] .init : 0xc1903000 - 0xc19c7000 ( 784 kB)
    [ 0.000000] .data : 0xc161ad70 - 0xc19023c0 (2973 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc161ad70 (6251 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
    [ 0.000000] NR_IRQS:2304 nr_irqs:512 16
    [ 0.000000] CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.004000] tsc: Detected 2893.573 MHz processor
    [ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5787.14 BogoMIPS (lpj=11574292)
    [ 0.000003] pid_max: default: 32768 minimum: 301
    [ 0.000021] Security Framework initialized
    [ 0.000027] AppArmor: AppArmor initialized
    [ 0.000028] Yama: becoming mindful.
    [ 0.000059] Mount-cache hash table entries: 512
    [ 0.000179] Initializing cgroup subsys cpuacct
    [ 0.000181] Initializing cgroup subsys memory
    [ 0.000185] Initializing cgroup subsys devices
    [ 0.000186] Initializing cgroup subsys freezer
    [ 0.000187] Initializing cgroup subsys blkio
    [ 0.000188] Initializing cgroup subsys perf_event
    [ 0.000190] Initializing cgroup subsys hugetlb
    [ 0.000210] CPU: Physical Processor ID: 0
    [ 0.000211] CPU: Processor Core ID: 0
    [ 0.000215] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [ 0.000215] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.000217] mce: CPU supports 7 MCE banks
    [ 0.000227] CPU0: Thermal monitoring enabled (TM1)
    [ 0.000232] process: using mwait in idle threads
    [ 0.000237] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
    [ 0.000237] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
    [ 0.000237] tlb_flushall_shift: 1
    [ 0.000516] Freeing SMP alternatives: 24k freed
    [ 0.002223] ACPI: Core revision 20121018
    [ 0.016654] ftrace: allocating 26116 entries in 52 pages
    [ 0.026411] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.026798] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.066382] smpboot: CPU0: Intel(R) Pentium(R) CPU G2020 @ 2.90GHz (fam: 06, model: 3a, stepping: 09)
    [ 0.066388] TSC deadline timer enabled
    [ 0.066391] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
    [ 0.066397] ... version: 3
    [ 0.066398] ... bit width: 48
    [ 0.066399] ... generic registers: 8
    [ 0.066400] ... value mask: 0000ffffffffffff
    [ 0.066401] ... max period: 000000007fffffff
    [ 0.066402] ... fixed-purpose events: 3
    [ 0.066402] ... event mask: 00000007000000ff
    [ 0.067148] CPU 1 irqstacks, hard=f6cfa000 soft=f6cfc000
    [ 0.067149] smpboot: Booting Node 0, Processors #1 OK
    [ 0.077271] Initializing CPU#1
    [ 0.080166] Brought up 2 CPUs
    [ 0.080169] smpboot: Total of 2 processors activated (11574.29 BogoMIPS)
    [ 0.080234] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.081662] devtmpfs: initialized
    [ 0.081816] EVM: security.selinux
    [ 0.081817] EVM: security.SMACK64
    [ 0.081818] EVM: security.capability
    [ 0.081908] PM: Registering ACPI NVS region [mem 0x77308000-0x7741cfff] (1134592 bytes)
    [ 0.081919] PM: Registering ACPI NVS region [mem 0x785d4000-0x78616fff] (274432 bytes)
    [ 0.082480] regulator-dummy: no parameters
    [ 0.082515] NET: Registered protocol family 16
    [ 0.082625] EISA bus registered
    [ 0.082713] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.082714] ACPI: bus type pci registered
    [ 0.082748] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.082750] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.082751] PCI: Using MMCONFIG for extended config space
    [ 0.082752] PCI: Using configuration type 1 for base access
    [ 0.083384] bio: create slab <bio-0> at 0
    [ 0.083446] ACPI: Added _OSI(Module Device)
    [ 0.083447] ACPI: Added _OSI(Processor Device)
    [ 0.083448] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.083449] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.084803] ACPI: EC: Look up EC in DSDT
    [ 0.086230] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.088418] ACPI: SSDT 772b5018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.088763] ACPI: Dynamic OEM Table Load:
    [ 0.088764] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.088940] ACPI: SSDT 772b6a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.089306] ACPI: Dynamic OEM Table Load:
    [ 0.089308] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.089381] ACPI: SSDT 772b7c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.089723] ACPI: Dynamic OEM Table Load:
    [ 0.089724] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.089904] ACPI: Interpreter enabled
    [ 0.089908] ACPI: (supports S0 S1 S4 S5)
    [ 0.089921] ACPI: Using IOAPIC for interrupt routing
    [ 0.093581] ACPI: Power Resource [FN00] (off)
    [ 0.093630] ACPI: Power Resource [FN01] (off)
    [ 0.093678] ACPI: Power Resource [FN02] (off)
    [ 0.093725] ACPI: Power Resource [FN03] (off)
    [ 0.093772] ACPI: Power Resource [FN04] (off)
    [ 0.094086] ACPI: No dock devices found.
    [ 0.094089] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.094252] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.094254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.094726] PCI host bridge to bus 0000:00
    [ 0.094729] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.094730] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.094732] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.094733] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.094735] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.094736] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.094738] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.094739] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.094740] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.094742] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.094743] pci_bus 0000:00: root bus resource [mem 0x7da00000-0xfeafffff]
    [ 0.094750] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
    [ 0.094782] pci 0000:00:02.0: [8086:0152] type 00 class 0x030000
    [ 0.094791] pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
    [ 0.094797] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.094801] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
    [ 0.094846] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
    [ 0.094867] pci 0000:00:14.0: reg 10: [mem 0xf7c00000-0xf7c0ffff 64bit]
    [ 0.094936] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.094957] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
    [ 0.094979] pci 0000:00:16.0: reg 10: [mem 0xf7c1b000-0xf7c1b00f 64bit]
    [ 0.095053] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.095075] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
    [ 0.095092] pci 0000:00:16.3: reg 10: [io 0xf0c0-0xf0c7]
    [ 0.095100] pci 0000:00:16.3: reg 14: [mem 0xf7c19000-0xf7c19fff]
    [ 0.095198] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
    [ 0.095218] pci 0000:00:1a.0: reg 10: [mem 0xf7c18000-0xf7c183ff]
    [ 0.095306] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.095330] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
    [ 0.095344] pci 0000:00:1b.0: reg 10: [mem 0xf7c10000-0xf7c13fff 64bit]
    [ 0.095409] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.095430] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
    [ 0.095506] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.095529] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
    [ 0.095604] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.095636] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
    [ 0.095656] pci 0000:00:1d.0: reg 10: [mem 0xf7c17000-0xf7c173ff]
    [ 0.095744] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.095768] pci 0000:00:1f.0: [8086:1e49] type 00 class 0x060100
    [ 0.095887] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
    [ 0.095904] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
    [ 0.095911] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
    [ 0.095918] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
    [ 0.095925] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
    [ 0.095932] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
    [ 0.095939] pci 0000:00:1f.2: reg 24: [mem 0xf7c16000-0xf7c167ff]
    [ 0.095981] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.095997] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
    [ 0.096011] pci 0000:00:1f.3: reg 10: [mem 0xf7c15000-0xf7c150ff 64bit]
    [ 0.096030] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
    [ 0.096097] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.096170] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.096190] pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff]
    [ 0.096223] pci 0000:02:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
    [ 0.096245] pci 0000:02:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
    [ 0.096335] pci 0000:02:00.0: supports D1 D2
    [ 0.096337] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.104126] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.104132] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
    [ 0.104142] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
    [ 0.104164] pci_bus 0000:00: on NUMA node 0
    [ 0.104182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.104205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.104308] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.104443] pci0000:00: ACPI _OSC control (0x18) granted
    [ 0.104979] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.105011] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.105041] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.105070] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.105100] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.105130] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.105160] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.105189] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 0.105252] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
    [ 0.105255] vgaarb: loaded
    [ 0.105256] vgaarb: bridge control possible 0000:00:02.0
    [ 0.105381] SCSI subsystem initialized
    [ 0.105383] ACPI: bus type scsi registered
    [ 0.105404] libata version 3.00 loaded.
    [ 0.105418] ACPI: bus type usb registered
    [ 0.105429] usbcore: registered new interface driver usbfs
    [ 0.105435] usbcore: registered new interface driver hub
    [ 0.105451] usbcore: registered new device driver usb
    [ 0.105510] PCI: Using ACPI for IRQ routing
    [ 0.107000] PCI: pci_cache_line_size set to 64 bytes
    [ 0.107041] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.107043] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
    [ 0.107044] e820: reserve RAM buffer [mem 0x76e88000-0x77ffffff]
    [ 0.107045] e820: reserve RAM buffer [mem 0x785d4000-0x7bffffff]
    [ 0.107047] e820: reserve RAM buffer [mem 0x78a33000-0x7bffffff]
    [ 0.107048] e820: reserve RAM buffer [mem 0x79000000-0x7bffffff]
    [ 0.107050] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff]
    [ 0.107107] NetLabel: Initializing
    [ 0.107108] NetLabel: domain hash size = 128
    [ 0.107108] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.107115] NetLabel: unlabeled traffic allowed by default
    [ 0.107206] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.107210] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.109216] Switching to clocksource hpet
    [ 0.113945] AppArmor: AppArmor Filesystem Enabled
    [ 0.113962] pnp: PnP ACPI init
    [ 0.113971] ACPI: bus type pnp registered
    [ 0.114033] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.114036] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.114044] pnp 00:01: [dma 4]
    [ 0.114056] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.114069] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.114130] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.114159] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 0.114161] system 00:04: [io 0x1000-0x100f] has been reserved
    [ 0.114162] system 00:04: [io 0xffff] has been reserved
    [ 0.114164] system 00:04: [io 0xffff] has been reserved
    [ 0.114165] system 00:04: [io 0x0400-0x0453] has been reserved
    [ 0.114167] system 00:04: [io 0x0458-0x047f] has been reserved
    [ 0.114169] system 00:04: [io 0x0500-0x057f] has been reserved
    [ 0.114170] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 0.114172] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.114193] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.114223] system 00:06: [io 0x0454-0x0457] has been reserved
    [ 0.114225] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.114309] system 00:07: [io 0x0a00-0x0a1f] has been reserved
    [ 0.114311] system 00:07: [io 0x0a30-0x0a3f] has been reserved
    [ 0.114312] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.114357] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.114359] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.114377] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.114561] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.114563] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.114565] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.114566] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.114568] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.114570] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.114571] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.114573] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.114575] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.114577] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.114578] system 00:0a: [mem 0x7da00000-0x7da00fff] has been reserved
    [ 0.114580] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.114695] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
    [ 0.114697] system 00:0b: [mem 0x40004000-0x40004fff] has been reserved
    [ 0.114699] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.114714] pnp: PnP ACPI: found 12 devices
    [ 0.114715] ACPI: ACPI bus type pnp unregistered
    [ 0.114717] PnPBIOS: Disabled by ACPI PNP
    [ 0.150292] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.150304] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.150307] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
    [ 0.150313] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
    [ 0.150335] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.150336] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.150338] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.150339] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.150341] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.150342] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.150344] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.150345] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.150347] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.150348] pci_bus 0000:00: resource 13 [mem 0x7da00000-0xfeafffff]
    [ 0.150350] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.150351] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
    [ 0.150373] NET: Registered protocol family 2
    [ 0.150466] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.150482] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    [ 0.150498] TCP: Hash tables configured (established 8192 bind 8192)
    [ 0.150510] TCP: reno registered
    [ 0.150512] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.150517] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.150546] NET: Registered protocol family 1
    [ 0.150554] pci 0000:00:02.0: Boot video device
    [ 0.150642] PCI: CLS 64 bytes, default 64
    [ 0.150670] Trying to unpack rootfs image as initramfs...
    [ 0.566057] Freeing initrd memory: 29180k freed
    [ 0.570430] Initialise module verification
    [ 0.570461] audit: initializing netlink socket (disabled)
    [ 0.570469] type=2000 audit(1393079128.564:1): initialized
    [ 0.587639] bounce pool size: 64 pages
    [ 0.587649] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.588627] VFS: Disk quotas dquot_6.5.2
    [ 0.588658] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.588986] fuse init (API version 7.20)
    [ 0.589041] msgmni has been set to 1675
    [ 0.589318] Key type asymmetric registered
    [ 0.589320] Asymmetric key parser 'x509' registered
    [ 0.589341] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.589357] io scheduler noop registered
    [ 0.589359] io scheduler deadline registered (default)
    [ 0.589364] io scheduler cfq registered
    [ 0.589506] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.589515] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.589560] intel_idle: MWAIT substates: 0x1120
    [ 0.589561] intel_idle: v0.4 model 0x3A
    [ 0.589562] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.589620] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
    [ 0.589624] ACPI: Power Button [PWRB]
    [ 0.589648] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [ 0.589650] ACPI: Power Button [PWRF]
    [ 0.589706] ACPI: Fan [FAN0] (off)
    [ 0.589723] ACPI: Fan [FAN1] (off)
    [ 0.589739] ACPI: Fan [FAN2] (off)
    [ 0.589757] ACPI: Fan [FAN3] (off)
    [ 0.589774] ACPI: Fan [FAN4] (off)
    [ 0.589813] ACPI: Requesting acpi_cpufreq
    [ 0.596224] thermal LNXTHERM:00: registered as thermal_zone0
    [ 0.596226] ACPI: Thermal Zone [TZ00] (28 C)
    [ 0.596363] thermal LNXTHERM:01: registered as thermal_zone1
    [ 0.596364] ACPI: Thermal Zone [TZ01] (30 C)
    [ 0.596385] GHES: HEST is not enabled!
    [ 0.596397] isapnp: Scanning for PnP cards...
    [ 0.596436] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [ 0.617304] 0000:00:16.3: ttyS4 at I/O 0xf0c0 (irq = 19) is a 16550A
    [ 0.617433] Linux agpgart interface v0.103
    [ 0.618171] brd: module loaded
    [ 0.618541] loop: module loaded
    [ 0.618748] libphy: Fixed MDIO Bus: probed
    [ 0.618786] tun: Universal TUN/TAP device driver, 1.6
    [ 0.618787] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [ 0.618806] PPP generic driver version 2.4.2
    [ 0.618827] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.618829] ehci-pci: EHCI PCI platform driver
    [ 0.618845] ehci-pci 0000:00:1a.0: setting latency timer to 64
    [ 0.618848] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 0.618852] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 0.618863] ehci-pci 0000:00:1a.0: debug port 2
    [ 0.622741] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 0.622753] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c18000
    [ 0.631895] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 0.631908] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [ 0.631910] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 0.631911] usb usb1: Product: EHCI Host Controller
    [ 0.631913] usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
    [ 0.631914] usb usb1: SerialNumber: 0000:00:1a.0
    [ 0.631977] hub 1-0:1.0: USB hub found
    [ 0.631980] hub 1-0:1.0: 3 ports detected
    [ 0.632066] ehci-pci 0000:00:1d.0: setting latency timer to 64
    [ 0.632069] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.632073] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 0.632083] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.635949] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.635959] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c17000
    [ 0.647852] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.647861] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [ 0.647862] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 0.647864] usb usb2: Product: EHCI Host Controller
    [ 0.647865] usb usb2: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
    [ 0.647866] usb usb2: SerialNumber: 0000:00:1d.0
    [ 0.647919] hub 2-0:1.0: USB hub found
    [ 0.647921] hub 2-0:1.0: 3 ports detected
    [ 0.647992] ehci-platform: EHCI generic platform driver
    [ 0.647997] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 0.648005] uhci_hcd: USB Universal Host Controller Interface driver
    [ 0.648032] xhci_hcd 0000:00:14.0: setting latency timer to 64
    [ 0.648035] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.648037] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 0.648112] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.648149] xhci_hcd 0000:00:14.0: irq 40 for MSI/MSI-X
    [ 0.648185] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [ 0.648187] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 0.648188] usb usb3: Product: xHCI Host Controller
    [ 0.648189] usb usb3: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
    [ 0.648190] usb usb3: SerialNumber: 0000:00:14.0
    [ 0.648232] xHCI xhci_add_endpoint called for root hub
    [ 0.648234] xHCI xhci_check_bandwidth called for root hub
    [ 0.648246] hub 3-0:1.0: USB hub found
    [ 0.648251] hub 3-0:1.0: 4 ports detected
    [ 0.648442] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.648444] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 0.648458] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
    [ 0.648460] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 0.648461] usb usb4: Product: xHCI Host Controller
    [ 0.648463] usb usb4: Manufacturer: Linux 3.8.0-19-generic xhci_hcd
    [ 0.648464] usb usb4: SerialNumber: 0000:00:14.0
    [ 0.648505] xHCI xhci_add_endpoint called for root hub
    [ 0.648506] xHCI xhci_check_bandwidth called for root hub
    [ 0.648518] hub 4-0:1.0: USB hub found
    [ 0.648523] hub 4-0:1.0: 4 ports detected
    [ 0.943095] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 0.949342] isapnp: No Plug & Play device found
    [ 0.951144] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.951485] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.951488] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.951560] mousedev: PS/2 mouse device common for all mice
    [ 0.951639] rtc_cmos 00:05: RTC can wake from S4
    [ 0.951739] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.951763] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.951819] device-mapper: uevent: version 1.0.3
    [ 0.951856] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
    [ 0.951865] EISA: Probing bus 0 at eisa.0
    [ 0.951866] EISA: Cannot allocate resource for mainboard
    [ 0.951867] Cannot allocate resource for EISA slot 1
    [ 0.951868] Cannot allocate resource for EISA slot 2
    [ 0.951869] Cannot allocate resource for EISA slot 3
    [ 0.951870] Cannot allocate resource for EISA slot 4
    [ 0.951871] Cannot allocate resource for EISA slot 5
    [ 0.951872] Cannot allocate resource for EISA slot 6
    [ 0.951873] Cannot allocate resource for EISA slot 7
    [ 0.951873] Cannot allocate resource for EISA slot 8
    [ 0.951874] EISA: Detected 0 cards.
    [ 0.951879] cpufreq-nforce2: No nForce2 chipset.
    [ 0.951901] cpuidle: using governor ladder
    [ 0.951930] cpuidle: using governor menu
    [ 0.951932] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.951933] EFI Variables Facility v0.08 2004-May-17
    [ 0.952051] ashmem: initialized
    [ 0.952135] TCP: cubic registered
    [ 0.952199] NET: Registered protocol family 10
    [ 0.952316] NET: Registered protocol family 17
    [ 0.952322] Key type dns_resolver registered
    [ 0.952451] Using IPI No-Shortcut mode
    [ 0.952564] Loading module verification certificates
    [ 0.955367] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 91de7a0b580f416d81726d1f7134a3ecef081207'
    [ 0.955375] registered taskstats version 1
    [ 0.957184] Key type trusted registered
    [ 0.958512] Key type encrypted registered
    [ 0.960136] rtc_cmos 00:05: setting system clock to 2014-02-22 14:25:29 UTC (1393079129)
    [ 0.960365] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [ 0.960367] EDD information not available.
    [ 0.960511] Freeing unused kernel memory: 784k freed
    [ 0.960646] Write protecting the kernel text: 6252k
    [ 0.960717] Write protecting the kernel read-only data: 2432k
    [ 0.960718] NX-protecting the kernel data: 3988k
    [ 0.969834] udevd[98]: starting version 175
    [ 1.002685] [drm] Initialized drm 1.1.0 20060810
    [ 1.013359] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 1.013576] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
    [ 1.013713] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xf841c000, d4:3d:7e:29:87:22, XID 0c900800 IRQ 41
    [ 1.013715] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 1.014643] Disabling lock debugging due to kernel taint
    [ 1.032734] ahci 0000:00:1f.2: version 3.0
    [ 1.032785] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
    [ 1.032829] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2 impl SATA mode
    [ 1.032832] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 1.032835] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.035646] scsi0 : ahci
    [ 1.035749] scsi1 : ahci
    [ 1.035828] scsi2 : ahci
    [ 1.035904] scsi3 : ahci
    [ 1.035984] scsi4 : ahci
    [ 1.036061] scsi5 : ahci
    [ 1.036085] ata1: DUMMY
    [ 1.036088] ata2: SATA max UDMA/133 abar m2048@0xf7c16000 port 0xf7c16180 irq 42
    [ 1.036089] ata3: DUMMY
    [ 1.036090] ata4: DUMMY
    [ 1.036091] ata5: DUMMY
    [ 1.036092] ata6: DUMMY
    [ 1.040633] [drm] Memory usable by graphics device = 2048M
    [ 1.040640] i915 0000:00:02.0: setting latency timer to 64
    [ 1.040855] i915 0000:00:02.0: irq 43 for MSI/MSI-X
    [ 1.040861] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 1.040862] [drm] Driver supports precise vblank timestamp query.
    [ 1.040920] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+memwns=io+mem
    [ 1.075170] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
    [ 1.075176] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 1.075442] hub 1-1:1.0: USB hub found
    [ 1.075553] hub 1-1:1.0: 6 ports detected
    [ 1.186508] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.318546] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
    [ 1.318551] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [ 1.318779] hub 2-1:1.0: USB hub found
    [ 1.318913] hub 2-1:1.0: 6 ports detected
    [ 1.354085] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.354870] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359)
    [ 1.354875] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node f6c32720), AE_NOT_FOUND (20121018/psparse-537)
    [ 1.412456] ata2.00: ATA-8: ST9250315AS, 0001SDM1, max UDMA/133
    [ 1.412461] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 1.414188] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20121018/psargs-359)
    [ 1.414193] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node f6c32720), AE_NOT_FOUND (20121018/psparse-537)
    [ 1.414571] ata2.00: configured for UDMA/133
    [ 1.414820] scsi 1:0:0:0: Direct-Access ATA ST9250315AS 0001 PQ: 0 ANSI: 5
    [ 1.414947] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 1.414975] sd 1:0:0:0: [sda] Write Protect is off
    [ 1.414977] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.414995] sd 1:0:0:0: Attached scsi generic sg0 type 0
    [ 1.415000] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.448526] sda: sda1 sda2 sda3 sda4
    [ 1.448954] sd 1:0:0:0: [sda] Attached SCSI disk
    [ 1.565519] tsc: Refined TSC clocksource calibration: 2893.426 MHz
    [ 1.565526] Switching to clocksource tsc
    [ 1.718781] fbcon: inteldrmfb (fb0) is primary device
    [ 1.956514] Console: switching to colour frame buffer device 240x67
    [ 1.961333] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 1.961335] i915 0000:00:02.0: registered panic notifier
    [ 1.964815] acpi device:49: registered as cooling_device7
    [ 1.964998] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 1.965029] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
    [ 1.965076] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 2.476620] uvesafb: Intel Corporation, Intel(R) Sandybridge/Ivybridge Graphics Controller, Hardware Version 0.0, OEM: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS, VBE v3.0
    [ 2.818462] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
    [ 3.207071] uvesafb: NX protection is actively.We have better not to use the PMI.
    [ 3.349757] uvesafb: VBIOS/hardware supports DDC2 transfers
    [ 3.362182] uvesafb: monitor limits: vf = 75 Hz, hf = 81 kHz, clk = 170 MHz
    [ 3.362343] uvesafb: scrolling: redraw
    [ 3.364206] uvesafb: framebuffer at 0xe0000000, mapped to 0xf9380000, using 16200k, total 65472k
    [ 3.364209] fb1: VESA VGA frame buffer device
    [ 4.257661] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
    [ 4.257665] EXT4-fs (sda2): write access will be enabled during recovery
    [ 6.505421] EXT4-fs (sda2): recovery complete
    [ 6.538388] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [ 23.126616] Adding 4101116k swap on /dev/sda1. Priority:-1 extents:1 across:4101116k
    [ 23.134942] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 23.162977] udevd[450]: starting version 175
    [ 23.238251] lp: driver loaded but no devices found
    [ 23.286571] f71882fg: Found f71869a chip at 0x290, revision 32
    [ 23.286595] ACPI Warning: 0x00000290-0x00000297 SystemIO conflicts with Region \_SB_.PCI0.LPCB.SIO1.RNTR 1 (20121018/utaddress-251)
    [ 23.286598] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 23.314246] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20121018/utaddress-251)
    [ 23.314253] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 23.314256] ACPI Warning: 0x00000530-0x0000053f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
    [ 23.314258] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 23.314260] ACPI Warning: 0x00000500-0x0000052f SystemIO conflicts with Region \GPIO 1 (20121018/utaddress-251)
    [ 23.314262] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 23.314263] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 23.349447] mei 0000:00:16.0: setting latency timer to 64
    [ 23.349498] mei 0000:00:16.0: irq 44 for MSI/MSI-X
    [ 23.451035] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12
    [ 23.517212] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12
    [ 23.521795] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
    [ 23.533314] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 23.576216] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
    [ 23.576375] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
    [ 23.576446] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [ 23.576511] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 23.579902] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 23.579951] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 23.598088] type=1400 audit(1393059352.191:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=642 comm="apparmor_parser"
    [ 23.598417] type=1400 audit(1393059352.191:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser"
    [ 23.598593] type=1400 audit(1393059352.191:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser"
    [ 23.599554] type=1400 audit(1393059352.191:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=638 comm="apparmor_parser"
    [ 23.599881] type=1400 audit(1393059352.191:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=638 comm="apparmor_parser"
    [ 23.600055] type=1400 audit(1393059352.191:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=638 comm="apparmor_parser"
    [ 24.811325] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
    [ 25.110080] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 25.137864] e4rat-preload: failsafe main process (794) killed by TERM signal
    [ 25.340367] Bluetooth: Core ver 2.16
    [ 25.340395] NET: Registered protocol family 31
    [ 25.340396] Bluetooth: HCI device and connection manager initialized
    [ 25.340531] Bluetooth: HCI socket layer initialized
    [ 25.340534] Bluetooth: L2CAP socket layer initialized
    [ 25.340538] Bluetooth: SCO socket layer initialized
    [ 25.348854] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 25.348857] Bluetooth: BNEP filters: protocol multicast
    [ 25.348863] Bluetooth: BNEP socket layer initialized
    [ 25.383099] e4rat-preload: avahi-cups-reload main process (866) terminated with status 1
    [ 25.388864] Bluetooth: RFCOMM TTY layer initialized
    [ 25.388877] Bluetooth: RFCOMM socket layer initialized
    [ 25.388878] Bluetooth: RFCOMM ver 1.11
    [ 25.400905] type=1400 audit(1393059353.999:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=891 comm="apparmor_parser"
    [ 25.401147] type=1400 audit(1393059353.999:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=891 comm="apparmor_parser"
    [ 25.403229] type=1400 audit(1393059353.999:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=892 comm="apparmor_parser"
    [ 25.403472] type=1400 audit(1393059353.999:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=892 comm="apparmor_parser"
    [ 25.416208] ppdev: user-space parallel port driver
    [ 25.680491] r8169 0000:02:00.0 eth0: link down
    [ 25.680503] r8169 0000:02:00.0 eth0: link down
    [ 25.681806] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 25.682133] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 26.097756] lirc_dev: IR Remote Control driver registered, major 251
    [ 26.142600] usbcore: registered new interface driver mceusb
    [ 27.334711] r8169 0000:02:00.0 eth0: link up
    [ 27.334718] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 371.716518] usb 1-1.6: new full-speed USB device number 3 using ehci-pci
    [ 371.810651] usb 1-1.6: New USB device found, idVendor=0471, idProduct=0815
    [ 371.810655] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 371.810657] usb 1-1.6: Product: eHome Infrared Transceiver
    [ 371.810659] usb 1-1.6: Manufacturer: Philips
    [ 371.810661] usb 1-1.6: SerialNumber: PH00V5Xq
    [ 371.888077] Registered IR keymap rc-rc6-mce
    [ 371.888183] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/rc/rc0/input9
    [ 371.888312] rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:0815) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/rc/rc0
    [ 371.911442] IR NEC protocol handler initialized
    [ 371.916144] IR RC5(x) protocol handler initialized
    [ 371.932311] IR RC6 protocol handler initialized
    [ 371.937762] IR JVC protocol handler initialized
    [ 371.942263] IR Sony protocol handler initialized
    [ 371.967762] IR SANYO protocol handler initialized
    [ 371.976200] input: MCE IR Keyboard/Mouse (mceusb) as /devices/virtual/input/input10
    [ 371.976248] IR MCE Keyboard/mouse protocol handler initialized
    [ 371.991067] rc rc0: lirc_dev: driver ir-lirc-codec (mceusb) registered at minor = 0
    [ 371.991075] IR LIRC bridge handler initialized
    [ 372.111595] mceusb 1-1.6:1.0: Registered Philips eHome Infrared Transceiver with mce emulator interface version 1
    [ 372.111599] mceusb 1-1.6:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
    [ 772.122052] usb 1-1.1: new high-speed USB device number 4 using ehci-pci
    [ 772.216992] usb 1-1.1: New USB device found, idVendor=0480, idProduct=a006
    [ 772.216997] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 772.216999] usb 1-1.1: Product: External USB 3.0
    [ 772.217001] usb 1-1.1: Manufacturer: TOSHIBA
    [ 772.217002] usb 1-1.1: SerialNumber: 20130714046036
    [ 772.283754] Initializing USB Mass Storage driver...
    [ 772.283870] scsi6 : usb-storage 1-1.1:1.0
    [ 772.283921] usbcore: registered new interface driver usb-storage
    [ 772.283922] USB Mass Storage support registered.
    [ 775.240288] scsi 6:0:0:0: Direct-Access TOSHIBA External USB 3.0 0101 PQ: 0 ANSI: 6
    [ 775.241737] sd 6:0:0:0: Attached scsi generic sg1 type 0
    [ 775.247311] sd 6:0:0:0: [sdb] 1953525164 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 775.248452] sd 6:0:0:0: [sdb] Write Protect is off
    [ 775.248455] sd 6:0:0:0: [sdb] Mode Sense: 1f 00 00 00
    [ 775.249458] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 775.264357] sdb: sdb1 sdb3
    [ 775.279314] sd 6:0:0:0: [sdb] Attached SCSI disk
    [ 776.014611] kjournald starting. Commit interval 5 seconds
    [ 776.014975] EXT3-fs (sdb1): using internal journal
    [ 776.015349] EXT3-fs (sdb1): recovery complete
    [ 776.015352] EXT3-fs (sdb1): mounted filesystem with ordered data mode
    [ 776.173338] systemd-hostnamed[2632]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
    [ 810.047842] hub 1-1:1.0: unable to enumerate USB device on port 2
    [ 810.422886] usb 1-1.2: new full-speed USB device number 6 using ehci-pci
    [ 810.518875] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b
    [ 810.518881] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 810.518884] usb 1-1.2: Product: USB Receiver
    [ 810.518885] usb 1-1.2: Manufacturer: Logitech
    [ 810.671090] usbcore: registered new interface driver usbhid
    [ 810.671096] usbhid: USB HID core driver
    [ 810.695834] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input2
    [ 810.698962] input: Logitech Unifying Device. Wireless PID:4009 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/input/input11
    [ 810.699065] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:4009] on usb-0000:00:1a.0-1.2:1
    [ 810.991185] usb 1-1.1: USB disconnect, device number 4
    [ 811.090200] quiet_error: 60 callbacks suppressed
    [ 811.090204] Buffer I/O error on device sdb1, logical block 1
    [ 811.090205] lost page write due to I/O error on sdb1
    [ 811.090208] EXT3-fs (sdb1): I/O error while writing superblock
    [ 827.519528] usb 4-3: new SuperSpeed USB device number 2 using xhci_hcd
    [ 827.538719] usb 4-3: New USB device found, idVendor=0480, idProduct=a006
    [ 827.538725] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 827.538727] usb 4-3: Product: External USB 3.0
    [ 827.538729] usb 4-3: Manufacturer: TOSHIBA
    [ 827.538730] usb 4-3: SerialNumber: 20130714046036
    [ 827.542094] scsi7 : usb-storage 4-3:1.0
    [ 830.937777] scsi 7:0:0:0: Direct-Access TOSHIBA External USB 3.0 0101 PQ: 0 ANSI: 6
    [ 830.942259] sd 7:0:0:0: Attached scsi generic sg1 type 0
    [ 830.967938] sd 7:0:0:0: [sdb] 1953525164 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 830.978639] sd 7:0:0:0: [sdb] Write Protect is off
    [ 830.978644] sd 7:0:0:0: [sdb] Mode Sense: 1f 00 00 00
    [ 830.989424] sd 7:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 831.117120] sdb: sdb1 sdb3
    [ 831.205664] sd 7:0:0:0: [sdb] Attached SCSI disk
    [ 831.810620] kjournald starting. Commit interval 5 seconds
    [ 831.818335] EXT3-fs (sdb1): using internal journal
    [ 831.818341] EXT3-fs (sdb1): recovery complete
    [ 831.818342] EXT3-fs (sdb1): mounted filesystem with ordered data mode
    [ 1757.376792] usb 4-3: USB disconnect, device number 2
    [ 1757.379936] usb 4-3: Set SEL for device-initiated U1 failed.
    [ 1757.379942] usb 4-3: Set SEL for device-initiated U2 failed.

  3. #3
    Join Date
    Feb 2014
    Beans
    4

    Re: MSI B75IA-E33 - 13.04 (x86) Unable to power off past shutdown.

    lspci:

    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
    00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
    00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
    00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
    00:16.3 Serial controller: Intel Corporation 7 Series/C210 Series Chipset Family KT Controller (rev 04)
    00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
    00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
    00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
    00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
    00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
    00:1f.0 ISA bridge: Intel Corporation B75 Express Chipset LPC Controller (rev 04)
    00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
    00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 06)

  4. #4
    Join Date
    Oct 2009
    Location
    Reykjavík, Ísland
    Beans
    12,840
    Distro
    Lubuntu 17.10 Artful Aardvark

    Re: MSI B75IA-E33 - 13.04 (x86) Unable to power off past shutdown.

    Hi, welcome to the fora.

    13.04 is out of support meaning that bugs (like for example this one) will not be fixed. Your best first step is a fresh install of 13.10.
    Bringing old hardware back to life. About problems due to upgrading.
    Please visit Quick Links -> Unanswered Posts.
    Don't use this space for a list of your hardware. It only creates false hits in the search engines.

  5. #5
    Join Date
    Feb 2014
    Beans
    4

    Re: MSI B75IA-E33 - 13.04 (x86) Unable to power off past shutdown.

    Agreed, and I am going to upgrade, it's on the way at the moment, but if the problem persists, then the question still remains. In that scenario, what are the alternatives/options?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •