Results 1 to 3 of 3

Thread: Dmesg help needed please...

  1. #1
    Join Date
    Feb 2014

    Dmesg help needed please...

    This is my first time posting on here, i had a quick look around and couldn't work out with sub-forum i should put this in, sorry if i have chosen incorrectly...

    I had a ubuntu 12.04.3LTS server running TVHeadEnd, with a RPi as the frontend. Everything was working fine, i then went and brought myself a little Dell Poweredge 1950. I have created a VM of the working server that was running TVHeadEnd, added the USB to the config settings, it gets everything, all the MUX's are there, perfect signal and quality. So i go to set the Pi up, reset all the DVB and PVR databases and its coming up with "TVHeadEnd HTSP: No input detected".
    So after a while of looking around in the server, i came to the Dmesg log, i have added just the end part (everything from the start of the DVB config):

    [ 13.531334] dvb-usb: found a 'Hauppauge Nova-TD Stick (52009)' in cold state, will try to load a firmware
    [ 13.548551] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
    [ 13.821865] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None
    [ 14.646128] init: failsafe main process (584) killed by TERM signal
    [ 15.130773] type=1400 audit(1391719987.659:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=753 comm="apparmor_parser"
    [ 15.131423] type=1400 audit(1391719987.663:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=753 comm="apparmor_parser"
    [ 15.131645] type=1400 audit(1391719987.663:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=753 comm="apparmor_parser"
    [ 15.149650] type=1400 audit(1391719987.679:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=755 comm="apparmor_parser"
    [ 18.490533] dib0700: firmware started successfully.
    [ 18.993964] dvb-usb: found a 'Hauppauge Nova-TD Stick (52009)' in warm state.
    [ 18.994473] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
    [ 18.995615] DVB: registering new adapter (Hauppauge Nova-TD Stick (52009))
    [ 19.939357] usb 1-1: DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
    [ 20.524680] DiB0070: successfully identified
    [ 20.524690] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
    [ 20.527972] DVB: registering new adapter (Hauppauge Nova-TD Stick (52009))
    [ 20.999385] usb 1-1: DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...
    [ 21.589969] DiB0070: successfully identified
    [ 21.626593] Registered IR keymap rc-dib0700-rc5
    [ 21.627205] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/rc/rc0/input5
    [ 21.627360] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/rc/rc0
    [ 21.627872] dvb-usb: schedule remote query interval to 50 msecs.
    [ 21.627880] dvb-usb: Hauppauge Nova-TD Stick (52009) successfully initialized and connected.
    [ 21.631543] usbcore: registered new interface driver dvb_usb_dib0700
    [ 21.715817] init: udev-fallback-graphics main process (1029) terminated with status 1 
    [ 21.780130] init: plymouth-splash main process (1038) terminated with status 1

    My initial guess would be it has something to do with the IR Key-map, since i never got any the dmesg showing the IR Key-map on the previous server. But I'm completely lost with the last two logs, not sure what either of those are but whatever they are they have been terminated...
    Last edited by Elfy; February 14th, 2014 at 09:44 PM.

  2. #2
    Join Date
    Feb 2007
    West Hills CA
    Ubuntu 14.04 Trusty Tahr

    Re: Dmesg help needed please...

    The power consumption of a "little" Dell PowerEdge running 24/7 will buy you a new RaspberryPi every year. Do the math. Regardless, servers have minimal graphics on board unless you have a discrete graphics card. Fallback graphics is telling you that. pymouth-splash is just the fancy, mode-setting boot graphics to dazzle you while your machine boots. On a headless server, I don't think you really care. To remove it, you would have to comment out a few things in the /etc/rcX.d boot scripts. Be aware that you will probably break things so proceed carefully.
    Oooh Shiny: PopularPages

    Unumquodque potest reparantur. Patientia sit virtus.

  3. #3
    Join Date
    Feb 2014

    Re: Dmesg help needed please...

    So from that dmesg, there is nothing wrong with anything but what it shows on bootup? As long as i'm not getting any errors that i shouldn't be. Is there anything you can see that could be causing any errors for a front end to be receiving the trvheadend signal? Thanks Tgalati4, really appreciate your help!


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts