Hello All
What did this comand Do "cdrecord blank=all dev-1,0,0" after I typed it in I got a long winded responce form the Termional. That responce is pasted below:
Code:
gordon@gordon-desktop:~$ wodim -scanbus
scsibus1:
1,0,0 100) 'PBDS ' 'CDRWDVD DH-48C2S' 'ND11' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
gordon@gordon-desktop:~$ cdrecord blank=all dev=1,0,0
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
WARNING: the deprecated pseudo SCSI syntax found as device specification.
Support for that may cease in the future versions of wodim. For now,
the device will be mapped to a block device file where possible.
Run "wodim --devices" for details.
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'PBDS '
Identification : 'CDRWDVD DH-48C2S'
Revision : 'ND11'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Errno: 5 (Input/output error), test unit ready scsi sendcmd: no error
CDB: 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s
wodim: No disk / Wrong disk!
gordon@gordon-desktop:~$
Gordon
Bookmarks