I'm running ubuntu 12.04 in vmware. The network connection is running in bridge mode. I'm trying to connect to my vpn server using command line https://wiki.ubuntu.com/VPN

I'm sure the vpn works, as it connects fine with my windows machine and android phone.

This is my vpn log so it seems to establish the connection fine.

using channel 9
Using interface ppp0
Connect: ppp0 <--> /dev/pts/2
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x5d1a0bd> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xc65ae795> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0xc65ae795> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x5d1a0bd> <pcomp> <accomp>]
sent [LCP EchoReq id=0x0 magic=0x5d1a0bd]
rcvd [LCP EchoReq id=0x0 magic=0xc65ae795]
sent [LCP EchoRep id=0x0 magic=0x5d1a0bd]
rcvd [CHAP Challenge id=0x1d <e1a713ac563e9796d19b53a80e508df6>, name = "pptpd"]
sent [CHAP Response id=0x1d <2c1b2fc24ee76a1dcb18ac30712c0c7e0000000000000000d 2190880ae45acc1009f0db52a812809120fca16176b409c00> , name = "banz"]
rcvd [LCP EchoRep id=0x0 magic=0xc65ae795]
rcvd [CHAP Success id=0x1d "S=B3DD9D98BCB681671598BDC4AAF21A94BF3BA081 M=Access granted"]
CHAP authentication succeeded
sent [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
rcvd [CCP ConfReq id=0x1 <mppe +H -M +S -L -D -C>]
sent [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
rcvd [CCP ConfAck id=0x1 <mppe +H -M +S -L -D -C>]
MPPE 128-bit stateless compression enabled
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr>]
rcvd [IPCP ConfReq id=0x1 <addr>]
sent [IPCP ConfAck id=0x1 <addr>]
rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
sent [IPCP ConfReq id=0x2 <addr>]
rcvd [IPCP ConfNak id=0x2 <addr>]
sent [IPCP ConfReq id=0x3 <addr>]
rcvd [IPCP ConfAck id=0x3 <addr>]
local IP address
remote IP address
Script /etc/ppp/ip-up started (pid 12796)
Script /etc/ppp/ip-up finished (pid 12796), status = 0x0
This is the routing table
default UG 100 0 0 eth0 * UH 0 0 0 ppp0 * U 0 0 0 eth0
spmental2.info UGH 0 0 0 eth0
However no traffic goes through it
ppp0 Link encapoint-to-Point Protocol
inet addr: P-t-P: Mask:
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:60 (60.0 B) TX bytes:234 (234.0 B)
Is there something that I missed out?