utopic,trusty beta overclock (i386)

[ventrical]

Just thought I would start a new topic rather than to drop off-topic overclock subject matter on other threads.

I was reading a thread started by kansasnoob about Gnome-flashback ..etc.. and so I installed it in a certain way that I do using fvwm-crystal. I am currently running gnome-session-flashback at an overclock speed on a Pentium 4 3.20GHz @ 4.297GHz on stock cooling. This is a hyperthreading processor and I am using ccsm ring-swtcher feature with no unstability apparent. I am going to set a goal for 4.8 GHz on stock cooling running gnome-flashback. Anyone else overclocking saucy beta is welcome to jump in.

regards..

ventrical@ventrical-System-Product-Name:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:      +1.55 V  (min =  +1.45 V, max =  +1.75 V)
 +3.3 Voltage:      +1.66 V  (min =  +3.00 V, max =  +3.60 V)
 +5.0 Voltage:      +1.58 V  (min =  +4.50 V, max =  +5.50 V)
+12.0 Voltage:     +12.09 V  (min = +11.20 V, max = +13.20 V)
CPU FAN Speed:     4066 RPM  (min =    0 RPM, max = 1800 RPM)
CHASSIS FAN Speed:    0 RPM  (min =    0 RPM, max = 1800 RPM)
POWER FAN Speed:      0 RPM  (min =    0 RPM, max = 1800 RPM)
CPU Temperature:    +36.0°C  (high = +90.0°C, crit = +125.0°C)
MB Temperature:     +30.0°C  (high = +70.0°C, crit = +125.0°C)
Power Temperature:  +21.0°C  (high = +80.0°C, crit = +125.0°C)

nouveau-pci-0400
Adapter: PCI adapter
temp1:        +36.0°C  (high = +95.0°C, hyst =  +3.0°C)
                       (crit = +105.0°C, hyst =  +5.0°C)
                       (emerg = +135.0°C, hyst =  +5.0°C)

ventrical@ventrical-System-Product-Name:~$ sudo dmidecode -t processor | grep "Speed"
[sudo] password for ventrical: 
    Max Speed: 4000 MHz
    Current Speed: 4297 MHz
ventrical@ventrical-System-Product-Name:~$

[ventrical]

4330 GHz by steps of 2

ventrical@ventrical-System-Product-Name:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:      +1.55 V  (min =  +1.45 V, max =  +1.75 V)
 +3.3 Voltage:      +1.66 V  (min =  +3.00 V, max =  +3.60 V)
 +5.0 Voltage:      +1.58 V  (min =  +4.50 V, max =  +5.50 V)
+12.0 Voltage:     +12.09 V  (min = +11.20 V, max = +13.20 V)
CPU FAN Speed:     4090 RPM  (min =    0 RPM, max = 1800 RPM)
CHASSIS FAN Speed:    0 RPM  (min =    0 RPM, max = 1800 RPM)
POWER FAN Speed:      0 RPM  (min =    0 RPM, max = 1800 RPM)
CPU Temperature:    +36.0°C  (high = +90.0°C, crit = +125.0°C)
MB Temperature:     +31.0°C  (high = +70.0°C, crit = +125.0°C)
Power Temperature:  +21.0°C  (high = +80.0°C, crit = +125.0°C)

nouveau-pci-0400
Adapter: PCI adapter
temp1:        +36.0°C  (high = +95.0°C, hyst =  +3.0°C)
                       (crit = +105.0°C, hyst =  +5.0°C)
                       (emerg = +135.0°C, hyst =  +5.0°C)

ventrical@ventrical-System-Product-Name:~$ sudo dmidecode -t processor | grep "Speed"
[sudo] password for ventrical: 
    Max Speed: 4000 MHz
    Current Speed: 4330 MHz
ventrical@ventrical-System-Product-Name:~$

[ventrical]

4343

ventrical@ventrical-System-Product-Name:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:      +1.55 V  (min =  +1.45 V, max =  +1.75 V)
 +3.3 Voltage:      +1.66 V  (min =  +3.00 V, max =  +3.60 V)
 +5.0 Voltage:      +1.58 V  (min =  +4.50 V, max =  +5.50 V)
+12.0 Voltage:     +12.09 V  (min = +11.20 V, max = +13.20 V)
CPU FAN Speed:     4141 RPM  (min =    0 RPM, max = 1800 RPM)
CHASSIS FAN Speed:    0 RPM  (min =    0 RPM, max = 1800 RPM)
POWER FAN Speed:      0 RPM  (min =    0 RPM, max = 1800 RPM)
CPU Temperature:    +36.0°C  (high = +90.0°C, crit = +125.0°C)
MB Temperature:     +31.0°C  (high = +70.0°C, crit = +125.0°C)
Power Temperature:  +21.0°C  (high = +80.0°C, crit = +125.0°C)

nouveau-pci-0400
Adapter: PCI adapter
temp1:        +36.0°C  (high = +95.0°C, hyst =  +3.0°C)
                       (crit = +105.0°C, hyst =  +5.0°C)
                       (emerg = +135.0°C, hyst =  +5.0°C)

ventrical@ventrical-System-Product-Name:~$ sudodmidecode -t processor | grep "Speed"
sudodmidecode: command not found
ventrical@ventrical-System-Product-Name:~$ sudo dmidecode -t processor | grep "Speed"
[sudo] password for ventrical: 
    Max Speed: 4000 MHz
    Current Speed: 4343 MHz
ventrical@ventrical-System-Product-Name:~$

[ventrical]

Ok... ran into a wall. Adjusted PCIe freq from 100 to 102MHz. No lock ups at 4.375 GHz

ventrical@ventrical-System-Product-Name:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:      +1.55 V  (min =  +1.45 V, max =  +1.75 V)
 +3.3 Voltage:      +1.66 V  (min =  +3.00 V, max =  +3.60 V)
 +5.0 Voltage:      +1.58 V  (min =  +4.50 V, max =  +5.50 V)
+12.0 Voltage:     +12.09 V  (min = +11.20 V, max = +13.20 V)
CPU FAN Speed:     4115 RPM  (min =    0 RPM, max = 1800 RPM)
CHASSIS FAN Speed:    0 RPM  (min =    0 RPM, max = 1800 RPM)
POWER FAN Speed:      0 RPM  (min =    0 RPM, max = 1800 RPM)
CPU Temperature:    +36.0°C  (high = +90.0°C, crit = +125.0°C)
MB Temperature:     +29.0°C  (high = +70.0°C, crit = +125.0°C)
Power Temperature:  +22.0°C  (high = +80.0°C, crit = +125.0°C)

nouveau-pci-0400
Adapter: PCI adapter
temp1:        +36.0°C  (high = +95.0°C, hyst =  +3.0°C)
                       (crit = +105.0°C, hyst =  +5.0°C)
                       (emerg = +135.0°C, hyst =  +5.0°C)

ventrical@ventrical-System-Product-Name:~$ sudo dmidecode -t processor | grep "Speed"
[sudo] password for ventrical: 
    Max Speed: 4000 MHz
    Current Speed: 4375 MHz
ventrical@ventrical-System-Product-Name:~$

cpu freq 273
Dram freq 409
PM Turbo
PCIe 102
PCI clk sync 33.33
Mem V 1.95
Vcore 1.5375

[ventrical]

4.407

ventrical@ventrical-System-Product-Name:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:      +1.55 V  (min =  +1.45 V, max =  +1.75 V)
 +3.3 Voltage:      +1.66 V  (min =  +3.00 V, max =  +3.60 V)
 +5.0 Voltage:      +1.58 V  (min =  +4.50 V, max =  +5.50 V)
+12.0 Voltage:     +12.09 V  (min = +11.20 V, max = +13.20 V)
CPU FAN Speed:     4066 RPM  (min =    0 RPM, max = 1800 RPM)
CHASSIS FAN Speed:    0 RPM  (min =    0 RPM, max = 1800 RPM)
POWER FAN Speed:      0 RPM  (min =    0 RPM, max = 1800 RPM)
CPU Temperature:    +36.0°C  (high = +90.0°C, crit = +125.0°C)
MB Temperature:     +30.0°C  (high = +70.0°C, crit = +125.0°C)
Power Temperature:  +22.0°C  (high = +80.0°C, crit = +125.0°C)

nouveau-pci-0400
Adapter: PCI adapter
temp1:        +36.0°C  (high = +95.0°C, hyst =  +3.0°C)
                       (crit = +105.0°C, hyst =  +5.0°C)
                       (emerg = +135.0°C, hyst =  +5.0°C)

ventrical@ventrical-System-Product-Name:~$ sudo dmideocde -t processor | grep "Speed"
[sudo] password for ventrical: 
sudo: dmideocde: command not found
ventrical@ventrical-System-Product-Name:~$ sudo dmidecode -t processor | grep "Speed"
    Max Speed: 4000 MHz
    Current Speed: 4407 MHz
ventrical@ventrical-System-Product-Name:~$

[ventrical]

4.439

ventrical@ventrical-System-Product-Name:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:      +1.55 V  (min =  +1.45 V, max =  +1.75 V)
 +3.3 Voltage:      +1.66 V  (min =  +3.00 V, max =  +3.60 V)
 +5.0 Voltage:      +1.57 V  (min =  +4.50 V, max =  +5.50 V)
+12.0 Voltage:     +12.09 V  (min = +11.20 V, max = +13.20 V)
CPU FAN Speed:     4066 RPM  (min =    0 RPM, max = 1800 RPM)
CHASSIS FAN Speed:    0 RPM  (min =    0 RPM, max = 1800 RPM)
POWER FAN Speed:      0 RPM  (min =    0 RPM, max = 1800 RPM)
CPU Temperature:    +36.0°C  (high = +90.0°C, crit = +125.0°C)
MB Temperature:     +31.0°C  (high = +70.0°C, crit = +125.0°C)
Power Temperature:  +21.0°C  (high = +80.0°C, crit = +125.0°C)

nouveau-pci-0400
Adapter: PCI adapter
temp1:        +36.0°C  (high = +95.0°C, hyst =  +3.0°C)
                       (crit = +105.0°C, hyst =  +5.0°C)
                       (emerg = +135.0°C, hyst =  +5.0°C)

ventrical@ventrical-System-Product-Name:~$ sudo dmidecode -t processor | grep "Speed"
[sudo] password for ventrical: 
    Max Speed: 4000 MHz
    Current Speed: 4439 MHz
ventrical@ventrical-System-Product-Name:~$

[ventrical]

4.471

ventrical@ventrical-System-Product-Name:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:      +1.55 V  (min =  +1.45 V, max =  +1.75 V)
 +3.3 Voltage:      +1.66 V  (min =  +3.00 V, max =  +3.60 V)
 +5.0 Voltage:      +1.58 V  (min =  +4.50 V, max =  +5.50 V)
+12.0 Voltage:     +12.09 V  (min = +11.20 V, max = +13.20 V)
CPU FAN Speed:     4066 RPM  (min =    0 RPM, max = 1800 RPM)
CHASSIS FAN Speed:    0 RPM  (min =    0 RPM, max = 1800 RPM)
POWER FAN Speed:      0 RPM  (min =    0 RPM, max = 1800 RPM)
CPU Temperature:    +36.0°C  (high = +90.0°C, crit = +125.0°C)
MB Temperature:     +31.0°C  (high = +70.0°C, crit = +125.0°C)
Power Temperature:  +22.0°C  (high = +80.0°C, crit = +125.0°C)

nouveau-pci-0400
Adapter: PCI adapter
temp1:        +37.0°C  (high = +95.0°C, hyst =  +3.0°C)
                       (crit = +105.0°C, hyst =  +5.0°C)
                       (emerg = +135.0°C, hyst =  +5.0°C)

ventrical@ventrical-System-Product-Name:~$ sudo dmidecode -t processor | grep "Speed"
[sudo] password for ventrical: 
    Max Speed: 4000 MHz
    Current Speed: 4471 MHz

[ventrical]

4.503 GHz

Time for a break ! ... and hopefully not breakage ! lol

ventrical@ventrical-System-Product-Name:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:      +1.55 V  (min =  +1.45 V, max =  +1.75 V)
 +3.3 Voltage:      +1.66 V  (min =  +3.00 V, max =  +3.60 V)
 +5.0 Voltage:      +1.57 V  (min =  +4.50 V, max =  +5.50 V)
+12.0 Voltage:     +12.09 V  (min = +11.20 V, max = +13.20 V)
CPU FAN Speed:     4115 RPM  (min =    0 RPM, max = 1800 RPM)
CHASSIS FAN Speed:    0 RPM  (min =    0 RPM, max = 1800 RPM)
POWER FAN Speed:      0 RPM  (min =    0 RPM, max = 1800 RPM)
CPU Temperature:    +37.0°C  (high = +90.0°C, crit = +125.0°C)
MB Temperature:     +31.0°C  (high = +70.0°C, crit = +125.0°C)
Power Temperature:  +21.0°C  (high = +80.0°C, crit = +125.0°C)

nouveau-pci-0400
Adapter: PCI adapter
temp1:        +36.0°C  (high = +95.0°C, hyst =  +3.0°C)
                       (crit = +105.0°C, hyst =  +5.0°C)
                       (emerg = +135.0°C, hyst =  +5.0°C)

ventrical@ventrical-System-Product-Name:~$ sudo dmidecode -t processor | grep "Speed"
[sudo] password for ventrical: 
    Max Speed: 4000 MHz
    Current Speed: 4503 MHz
ventrical@ventrical-System-Product-Name:~$

[ventrical]

4.534

ventrical@ventrical-System-Product-Name:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:      +1.56 V  (min =  +1.45 V, max =  +1.75 V)
 +3.3 Voltage:      +1.66 V  (min =  +3.00 V, max =  +3.60 V)
 +5.0 Voltage:      +1.57 V  (min =  +4.50 V, max =  +5.50 V)
+12.0 Voltage:     +12.09 V  (min = +11.20 V, max = +13.20 V)
CPU FAN Speed:     4115 RPM  (min =    0 RPM, max = 1800 RPM)
CHASSIS FAN Speed:    0 RPM  (min =    0 RPM, max = 1800 RPM)
POWER FAN Speed:      0 RPM  (min =    0 RPM, max = 1800 RPM)
CPU Temperature:    +33.0°C  (high = +90.0°C, crit = +125.0°C)
MB Temperature:     +24.0°C  (high = +70.0°C, crit = +125.0°C)
Power Temperature:  +21.0°C  (high = +80.0°C, crit = +125.0°C)

nouveau-pci-0400
Adapter: PCI adapter
temp1:        +31.0°C  (high = +95.0°C, hyst =  +3.0°C)
                       (crit = +105.0°C, hyst =  +5.0°C)
                       (emerg = +135.0°C, hyst =  +5.0°C)

ventrical@ventrical-System-Product-Name:~$ sudo dmidecode -t processor | grep "Speed"
[sudo] password for ventrical: 
    Max Speed: 4000 MHz
    Current Speed: 4534 MHz
ventrical@ventrical-System-Product-Name:~$

[ventrical]

4.567

ventrical@ventrical-System-Product-Name:~$ sudo dmidecode -t processor | grep "Speed"
[sudo] password for ventrical: 
    Max Speed: 4000 MHz
    Current Speed: 4567 MHz
ventrical@ventrical-System-Product-Name:~$ sensors
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage:      +1.55 V  (min =  +1.45 V, max =  +1.75 V)
 +3.3 Voltage:      +1.66 V  (min =  +3.00 V, max =  +3.60 V)
 +5.0 Voltage:      +1.57 V  (min =  +4.50 V, max =  +5.50 V)
+12.0 Voltage:     +12.09 V  (min = +11.20 V, max = +13.20 V)
CPU FAN Speed:     4115 RPM  (min =    0 RPM, max = 1800 RPM)
CHASSIS FAN Speed:    0 RPM  (min =    0 RPM, max = 1800 RPM)
POWER FAN Speed:      0 RPM  (min =    0 RPM, max = 1800 RPM)
CPU Temperature:    +35.0°C  (high = +90.0°C, crit = +125.0°C)
MB Temperature:     +29.0°C  (high = +70.0°C, crit = +125.0°C)
Power Temperature:  +20.0°C  (high = +80.0°C, crit = +125.0°C)

nouveau-pci-0400
Adapter: PCI adapter
temp1:        +35.0°C  (high = +95.0°C, hyst =  +3.0°C)
                       (crit = +105.0°C, hyst =  +5.0°C)
                       (emerg = +135.0°C, hyst =  +5.0°C)

ventrical@ventrical-System-Product-Name:~$