Results 1 to 1 of 1

Thread: after config bonding eth0 and wlan0 => waiting for network configuration on booting

  1. #1
    Join Date
    Sep 2013
    Beans
    4

    after config bonding eth0 and wlan0 => waiting for network configuration on booting

    Hi all together,

    I'm a newbie ...

    Using Ubuntu Studio 12.04 64bit.
    After bonding eth0 and wlan0 I have to wait on Server booting on the following messages:
    Waiting for network configuration…
    and
    Waiting up to 60 more seconds for network configuration…

    Searching (in Google and different forums) I find out, this obviously seems to be an issue in the network configuration.
    But I do not find any issue in the configuration.
    And there is no default route set ...

    Do you have any idea?

    thx in advance


    see below my config files and output of some commands

    /etc/network/interfaces:
    Code:
    ## /etc/network/interfaces
    ##
    # interfaces(5) file used by ifup(8) and ifdown(8)
    #
    auto lo 
    iface lo inet loopback
    
    auto eth0
    iface eth0 inet manual
        dns-search        scons.de fritz.box
        dns-nameservers        192.172.10.1
        mtu             1500
        bond-master         bond0
    
    auto wlan0
    iface wlan0 inet manual
        dns-search        scons.de fritz.box
        dns-nameservers        192.172.10.1
        mtu             1500
        wpa-bridge        bond0
        wpa-driver         wext
        wpa-ap_scan        1
        wpa-conf         /etc/wpa_supplicant/wpa_supplicant.conf
        bond-master         bond0
        bond-mode         balance-rr
        bond-miimon         100
        bond-give-a-change    10
    
    auto bond0
    iface bond0 inet static
        address            192.172.10.100
        broadcast        192.172.10.255
        network            192.172.10.0
        netmask            255.255.255.0
        gateway            192.172.10.1
        dns-search        scons.de fritz.box
        dns-nameservers        192.172.10.1
        hwaddress          ether     28:02:06:07:ae:ad
        mtu             1500
        bond-mode         balance-rr
        bond-miimon         100
        bond-slaves         none
    /etc/Network-Manager/NetworkManager.conf
    Code:
    [main]
    plugins=ifupdown,keyfile
    dns=dnsmasq
    
    no-auto-default=*
    
    [ifupdown]
    managed=true
    
    [keyfile]
    unmanaged-devices=mac:00:23:14:d5:dc:ec;mac:5c:ff:35:09:70:78
    
    [logging]
    level=INFO
    domain=HW, ETHER, WIFI, DHCP4, WIFI_SCAN, IP4, DNS, SUPPLICANT
    /var/lib/NetworkManager/NetworkManager.state:
    Code:
    [main]
    NetworkingEnabled=true
    WirelessEnabled=true
    WWANEnabled=true
    WimaxEnabled=true

    /etc/hosts:
    Code:
    127.0.0.1    localhost
    192.172.10.100    nbhra201.scons.de nbhra201
    
    # The following lines are desirable for IPv6 capable hosts
    ::1     ip6-localhost ip6-loopback
    fe00::0 ip6-localnet
    ff00::0 ip6-mcastprefix
    ff02::1 ip6-allnodes
    ff02::2 ip6-allrouters

    resolvconf/resolv.conf.d/head:
    Code:
    # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
    #     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
    nameserver 192.172.10.30
    nameserver 127.0.0.1
    Output of

    route -n:
    Code:
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    192.172.10.0    0.0.0.0         255.255.255.0   U     0      0        0 bond0
    ifconfig:
    Code:
    bond0     Link encap:Ethernet  HWaddr 5c:ff:35:09:70:78  
              inet addr:192.172.10.100  Bcast:192.172.10.255  Mask:255.255.255.0
              UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
              RX packets:19759 errors:0 dropped:238 overruns:0 frame:0
              TX packets:15210 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:15502501 (15.5 MB)  TX bytes:3089333 (3.0 MB)
    
    eth0      Link encap:Ethernet  HWaddr 28:02:06:07:ae:ad  
              UP BROADCAST SLAVE MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
              Interrupt:20 Memory:f2500000-f2520000 
    
    lo        Link encap:Local Loopback  
              inet addr:127.0.0.1  Mask:255.0.0.0
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:1564 errors:0 dropped:0 overruns:0 frame:0
              TX packets:1564 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0 
              RX bytes:237436 (237.4 KB)  TX bytes:237436 (237.4 KB)
    
    wlan0     Link encap:Ethernet  HWaddr 5c:ff:35:09:70:78  
              UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
              RX packets:19759 errors:0 dropped:0 overruns:0 frame:0
              TX packets:15210 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:15502501 (15.5 MB)  TX bytes:3089333 (3.0 MB)
    ps -ef|grep Network
    Code:
    root      2890  2698  0 20:54 pts/4    00:00:00 grep --color=auto Network
    Last edited by NewbieOld; September 30th, 2013 at 06:31 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •