Code:
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-17-generic (buildd@roseapple) (gcc version 4.7.2 (Ubuntu/Linaro 4.7.2-2ubuntu1) ) #28-Ubuntu SMP Tue Oct 9 19:32:08 UTC 2012 (Ubuntu 3.5.0-17.28-generic 3.5.5)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000de2f9fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000de2fa000-0x00000000de527fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de528000-0x00000000de528fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000de529000-0x00000000de64bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de64c000-0x00000000dee03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dee04000-0x00000000dee04fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dee05000-0x00000000dee47fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dee48000-0x00000000df5b1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df5b2000-0x00000000df7dcfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000df7dd000-0x00000000df7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./B75M-D3H, BIOS F11 08/23/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21e000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FF0000000 write-back
[ 0.000000] 2 base 210000000 mask FF8000000 write-back
[ 0.000000] 3 base 218000000 mask FFC000000 write-back
[ 0.000000] 4 base 21C000000 mask FFE000000 write-back
[ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 8GB, range: 256MB, type WB
[ 0.000000] reg 2, base: 8448MB, range: 128MB, type WB
[ 0.000000] reg 3, base: 8576MB, range: 64MB, type WB
[ 0.000000] reg 4, base: 8640MB, range: 32MB, type WB
[ 0.000000] reg 5, base: 3584MB, range: 512MB, type UC
[ 0.000000] total RAM covered: 8160M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 6 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 512MB, type WB
[ 0.000000] reg 3, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 4, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 5, base: 8672MB, range: 32MB, type UC
[ 0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.000000] found SMP MP-table at [mem 0x000fd7a0-0x000fd7af] mapped at [c00fd7a0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x37bfdfff]
[ 0.000000] [mem 0x00000000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x379fffff] page 2M
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x37bfdfff @ [mem 0x01ffa000-0x01ffffff]
[ 0.000000] RAMDISK: [mem 0x36332000-0x37190fff]
[ 0.000000] ACPI: RSDP 000f0490 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT de62d070 00064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP de636d98 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT de62d170 09C24 (v02 ALASKA A M I 00000012 INTL 20051117)
[ 0.000000] ACPI: FACS de64af80 00040
[ 0.000000] ACPI: APIC de636e90 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG de636f08 0003C (v01 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET de636f48 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT de636f80 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT de6372f0 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT de637ca0 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR de638738 00080 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 7780MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x1dffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xde2f9fff]
[ 0.000000] node 0: [mem 0xdee04000-0xdee04fff]
[ 0.000000] node 0: [mem 0xdee48000-0xdf5b1fff]
[ 0.000000] node 0: [mem 0xdf7dd000-0xdf7fffff]
[ 0.000000] node 0: [mem 0x00000000-0x1dffffff]
[ 0.000000] On node 0 totalpages: 2083349
[ 0.000000] free_area_init_node: node 0, pgdat c18a0840, node_mem_map f1f72200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 15561 pages used for memmap
[ 0.000000] HighMem zone: 1839553 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] e820: [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7bb2000 s34176 r0 d23168 u57344
[ 0.000000] pcpu-alloc: s34176 r0 d23168 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2066004
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=6659a6fd-920e-445b-b9e4-65083add5023 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] allocated 17760128 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0021e000)
[ 0.000000] Memory: 8220248k/8880128k available (5956k kernel code, 113148k reserved, 2928k data, 756k init, 7420456k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc18ae000 - 0xc196b000 ( 756 kB)
[ 0.000000] .data : 0xc15d1358 - 0xc18ad6c0 (2928 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15d1358 (5956 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 3192.884 MHz processor.
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.76 BogoMIPS (lpj=12771536)
[ 0.000003] pid_max: default: 32768 minimum: 301
[ 0.000016] Security Framework initialized
[ 0.000025] AppArmor: AppArmor initialized
[ 0.000025] Yama: becoming mindful.
[ 0.000053] Mount-cache hash table entries: 512
[ 0.000170] Initializing cgroup subsys cpuacct
[ 0.000171] Initializing cgroup subsys memory
[ 0.000174] Initializing cgroup subsys devices
[ 0.000175] Initializing cgroup subsys freezer
[ 0.000176] Initializing cgroup subsys blkio
[ 0.000178] Initializing cgroup subsys perf_event
[ 0.000196] CPU: Physical Processor ID: 0
[ 0.000197] CPU: Processor Core ID: 0
[ 0.000200] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.000200] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.000750] mce: CPU supports 9 MCE banks
[ 0.000760] CPU0: Thermal monitoring enabled (TM1)
[ 0.000766] using mwait in idle threads.
[ 0.002441] ACPI: Core revision 20120320
[ 0.008359] ftrace: allocating 24585 entries in 49 pages
[ 0.016554] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.016941] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.056535] CPU0: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz stepping 09
[ 0.160648] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.160653] ... version: 3
[ 0.160653] ... bit width: 48
[ 0.160654] ... generic registers: 8
[ 0.160655] ... value mask: 0000ffffffffffff
[ 0.160656] ... max period: 000000007fffffff
[ 0.160656] ... fixed-purpose events: 3
[ 0.160657] ... event mask: 00000007000000ff
[ 0.160737] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.160777] CPU 1 irqstacks, hard=f750e000 soft=f7518000
[ 0.171060] Initializing CPU#1
[ 0.160778] Booting Node 0, Processors #1
[ 0.174437] CPU 2 irqstacks, hard=f7540000 soft=f7542000
[ 0.184640] Initializing CPU#2
[ 0.174439] #2
[ 0.188186] CPU 3 irqstacks, hard=f754c000 soft=f754e000
[ 0.188188] #3 Ok.
[ 0.198389] Initializing CPU#3
[ 0.201914] Brought up 4 CPUs
[ 0.201917] Total of 4 processors activated (25543.07 BogoMIPS).
[ 0.204677] devtmpfs: initialized
[ 0.204788] EVM: security.selinux
[ 0.204789] EVM: security.SMACK64
[ 0.204790] EVM: security.capability
[ 0.204834] PM: Registering ACPI NVS region [mem 0xde529000-0xde64bfff] (1191936 bytes)
[ 0.204844] PM: Registering ACPI NVS region [mem 0xdee05000-0xdee47fff] (274432 bytes)
[ 0.205410] dummy:
[ 0.205436] RTC time: 21:54:35, date: 09/10/13
[ 0.205458] NET: Registered protocol family 16
[ 0.205516] Trying to unpack rootfs image as initramfs...
[ 0.205539] EISA bus registered
[ 0.205590] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.205591] ACPI: bus type pci registered
[ 0.205623] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.205624] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.205625] PCI: Using MMCONFIG for extended config space
[ 0.205626] PCI: Using configuration type 1 for base access
[ 0.206178] bio: create slab <bio-0> at 0
[ 0.206224] ACPI: Added _OSI(Module Device)
[ 0.206225] ACPI: Added _OSI(Processor Device)
[ 0.206226] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.206228] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.207464] ACPI: EC: Look up EC in DSDT
[ 0.208896] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.228748] ACPI: SSDT de4ca018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.229065] ACPI: Dynamic OEM Table Load:
[ 0.229066] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.256588] ACPI: SSDT de4cba98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.256923] ACPI: Dynamic OEM Table Load:
[ 0.256925] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.260466] ACPI: SSDT de4d7c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.260777] ACPI: Dynamic OEM Table Load:
[ 0.260778] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.280830] ACPI: Interpreter enabled
[ 0.280842] ACPI: (supports S0 S3 S4 S5)
[ 0.280857] ACPI: Using IOAPIC for interrupt routing
[ 0.284752] ACPI: Power Resource [FN00] (off)
[ 0.284799] ACPI: Power Resource [FN01] (off)
[ 0.284845] ACPI: Power Resource [FN02] (off)
[ 0.284890] ACPI: Power Resource [FN03] (off)
[ 0.284934] ACPI: Power Resource [FN04] (off)
[ 0.285261] ACPI: No dock devices found.
[ 0.285266] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.285477] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.285735] pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
[ 0.285736] pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
[ 0.285738] pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
[ 0.285739] pci_root PNP0A08:00: >host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.285741] pci_root PNP0A08:00: >host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.285742] pci_root PNP0A08:00: >host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.285743] pci_root PNP0A08:00: >host bridge window [mem 0x000dc000-0x000dffff]
[ 0.285744] pci_root PNP0A08:00: >host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.285746] pci_root PNP0A08:00: >host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.285747] pci_root PNP0A08:00: >host bridge window [mem 0xe0000000-0xfeafffff]
[ 0.285768] PCI host bridge to bus 0000:00
[ 0.285770] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
[ 0.285771] pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
[ 0.285772] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
[ 0.285774] pci_bus 0000:00: >root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.285775] pci_bus 0000:00: >root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.285776] pci_bus 0000:00: >root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.285777] pci_bus 0000:00: >root bus resource [mem 0x000dc000-0x000dffff]
[ 0.285779] pci_bus 0000:00: >root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.285780] pci_bus 0000:00: >root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.285781] pci_bus 0000:00: >root bus resource [mem 0xe0000000-0xfeafffff]
[ 0.285788] pci 0000:00:00.0: >[8086:0150] type 00 class 0x060000
[ 0.285818] pci 0000:00:01.0: >[8086:0151] type 01 class 0x060400
[ 0.285844] pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
[ 0.285880] pci 0000:00:14.0: >[8086:1e31] type 00 class 0x0c0330
[ 0.285901] pci 0000:00:14.0: >reg 10: [mem 0xf7100000-0xf710ffff 64bit]
[ 0.285966] pci 0000:00:14.0: >PME# supported from D3hot D3cold
[ 0.285986] pci 0000:00:16.0: >[8086:1e3a] type 00 class 0x078000
[ 0.286007] pci 0000:00:16.0: >reg 10: [mem 0xf711a000-0xf711a00f 64bit]
[ 0.286079] pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
[ 0.286108] pci 0000:00:1a.0: >[8086:1e2d] type 00 class 0x0c0320
[ 0.286127] pci 0000:00:1a.0: >reg 10: [mem 0xf7118000-0xf71183ff]
[ 0.286211] pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
[ 0.286234] pci 0000:00:1b.0: >[8086:1e20] type 00 class 0x040300
[ 0.286247] pci 0000:00:1b.0: >reg 10: [mem 0xf7110000-0xf7113fff 64bit]
[ 0.286310] pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
[ 0.286329] pci 0000:00:1c.0: >[8086:1e10] type 01 class 0x060400
[ 0.286403] pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
[ 0.286428] pci 0000:00:1c.4: >[8086:1e18] type 01 class 0x060400
[ 0.286502] pci 0000:00:1c.4: >PME# supported from D0 D3hot D3cold
[ 0.286531] pci 0000:00:1d.0: >[8086:1e26] type 00 class 0x0c0320
[ 0.286550] pci 0000:00:1d.0: >reg 10: [mem 0xf7117000-0xf71173ff]
[ 0.286634] pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
[ 0.286652] pci 0000:00:1e.0: >[8086:244e] type 01 class 0x060401
[ 0.286709] pci 0000:00:1f.0: >[8086:1e49] type 00 class 0x060100
[ 0.286824] pci 0000:00:1f.2: >[8086:1e02] type 00 class 0x010601
[ 0.286841] pci 0000:00:1f.2: >reg 10: [io 0xf070-0xf077]
[ 0.286847] pci 0000:00:1f.2: >reg 14: [io 0xf060-0xf063]
[ 0.286854] pci 0000:00:1f.2: >reg 18: [io 0xf050-0xf057]
[ 0.286861] pci 0000:00:1f.2: >reg 1c: [io 0xf040-0xf043]
[ 0.286867] pci 0000:00:1f.2: >reg 20: [io 0xf020-0xf03f]
[ 0.286874] pci 0000:00:1f.2: >reg 24: [mem 0xf7116000-0xf71167ff]
[ 0.286915] pci 0000:00:1f.2: >PME# supported from D3hot
[ 0.286930] pci 0000:00:1f.3: >[8086:1e22] type 00 class 0x0c0500
[ 0.286943] pci 0000:00:1f.3: >reg 10: [mem 0xf7115000-0xf71150ff 64bit]
[ 0.286962] pci 0000:00:1f.3: >reg 20: [io 0xf000-0xf01f]
[ 0.287010] pci 0000:01:00.0: >[10de:11c6] type 00 class 0x030000
[ 0.287018] pci 0000:01:00.0: >reg 10: [mem 0xf6000000-0xf6ffffff]
[ 0.287027] pci 0000:01:00.0: >reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.287036] pci 0000:01:00.0: >reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.287042] pci 0000:01:00.0: >reg 24: [io 0xe000-0xe07f]
[ 0.287048] pci 0000:01:00.0: >reg 30: [mem 0xf7000000-0xf707ffff pref]
[ 0.287098] pci 0000:01:00.1: >[10de:0e0b] type 00 class 0x040300
[ 0.287106] pci 0000:01:00.1: >reg 10: [mem 0xf7080000-0xf7083fff]
[ 0.292353] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.292355] pci 0000:00:01.0: > bridge window [io 0xe000-0xefff]
[ 0.292357] pci 0000:00:01.0: > bridge window [mem 0xf6000000-0xf70fffff]
[ 0.292360] pci 0000:00:01.0: > bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.292400] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
[ 0.292469] pci 0000:03:00.0: >[10ec:8168] type 00 class 0x020000
[ 0.292488] pci 0000:03:00.0: >reg 10: [io 0xd000-0xd0ff]
[ 0.292520] pci 0000:03:00.0: >reg 18: [mem 0xf2104000-0xf2104fff 64bit pref]
[ 0.292541] pci 0000:03:00.0: >reg 20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.292630] pci 0000:03:00.0: >supports D1 D2
[ 0.292631] pci 0000:03:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
[ 0.300338] pci 0000:00:1c.4: >PCI bridge to [bus 03-03]
[ 0.300341] pci 0000:00:1c.4: > bridge window [io 0xd000-0xdfff]
[ 0.300348] pci 0000:00:1c.4: > bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.300403] pci 0000:00:1e.0: >PCI bridge to [bus 04-04] (subtractive decode)
[ 0.300411] pci 0000:00:1e.0: > bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.300412] pci 0000:00:1e.0: > bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.300414] pci 0000:00:1e.0: > bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.300415] pci 0000:00:1e.0: > bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.300416] pci 0000:00:1e.0: > bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.300417] pci 0000:00:1e.0: > bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.300419] pci 0000:00:1e.0: > bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.300420] pci 0000:00:1e.0: > bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.300421] pci 0000:00:1e.0: > bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.300423] pci 0000:00:1e.0: > bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
[ 0.300437] pci_bus 0000:00: >on NUMA node 0
[ 0.300439] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.300557] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.300598] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.300625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.300652] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.300739] pci0000:00: >Requesting ACPI _OSC control (0x1d)
[ 0.300856] pci0000:00: >ACPI _OSC control (0x18) granted
[ 0.303413] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.303443] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.303470] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.303498] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.303525] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.303553] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.303580] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.303607] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.303665] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.303667] vgaarb: loaded
[ 0.303667] vgaarb: bridge control possible 0000:01:00.0
[ 0.303775] SCSI subsystem initialized
[ 0.303799] libata version 3.00 loaded.
[ 0.303812] ACPI: bus type usb registered
[ 0.303824] usbcore: registered new interface driver usbfs
[ 0.303829] usbcore: registered new interface driver hub
[ 0.303840] usbcore: registered new device driver usb
[ 0.303880] PCI: Using ACPI for IRQ routing
[ 0.305320] PCI: pci_cache_line_size set to 64 bytes
[ 0.305365] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.305367] e820: reserve RAM buffer [mem 0xde2fa000-0xdfffffff]
[ 0.305369] e820: reserve RAM buffer [mem 0xdee05000-0xdfffffff]
[ 0.305370] e820: reserve RAM buffer [mem 0xdf5b2000-0xdfffffff]
[ 0.305371] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]
[ 0.305372] e820: reserve RAM buffer [mem 0x21e000000-0x21fffffff]
[ 0.305427] NetLabel: Initializing
[ 0.305428] NetLabel: domain hash size = 128
[ 0.305428] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.305436] NetLabel: unlabeled traffic allowed by default
[ 0.305497] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.305501] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.307507] Switching to clocksource hpet
[ 0.312162] AppArmor: AppArmor Filesystem Enabled
[ 0.312172] pnp: PnP ACPI init
[ 0.312179] ACPI: bus type pnp registered
[ 0.312343] pnp 00:00: >[bus 00-3e]
[ 0.312345] pnp 00:00: >[io 0x0000-0x0cf7 window]
[ 0.312346] pnp 00:00: >[io 0x0cf8-0x0cff]
[ 0.312347] pnp 00:00: >[io 0x0d00-0xffff window]
[ 0.312349] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
[ 0.312350] pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
[ 0.312351] pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
[ 0.312352] pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
[ 0.312354] pnp 00:00: >[mem 0x000cc000-0x000cffff window]
[ 0.312355] pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
[ 0.312356] pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
[ 0.312357] pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
[ 0.312358] pnp 00:00: >[mem 0x000dc000-0x000dffff window]
[ 0.312360] pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
[ 0.312361] pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
[ 0.312362] pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
[ 0.312363] pnp 00:00: >[mem 0x000ec000-0x000effff window]
[ 0.312364] pnp 00:00: >[mem 0x000f0000-0x000fffff window]
[ 0.312366] pnp 00:00: >[mem 0xe0000000-0xfeafffff window]
[ 0.312367] pnp 00:00: >[mem 0x00010000-0x0001ffff window]
[ 0.312407] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.312421] pnp 00:01: >[mem 0xfed40000-0xfed44fff]
[ 0.312443] system 00:01: >[mem 0xfed40000-0xfed44fff] has been reserved
[ 0.312445] system 00:01: >Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.312452] pnp 00:02: >[io 0x0000-0x001f]
[ 0.312454] pnp 00:02: >[io 0x0081-0x0091]
[ 0.312455] pnp 00:02: >[io 0x0093-0x009f]
[ 0.312456] pnp 00:02: >[io 0x00c0-0x00df]
[ 0.312457] pnp 00:02: >[dma 4]
[ 0.312468] pnp 00:02: >Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.312473] pnp 00:03: >[mem 0xff000000-0xffffffff]
[ 0.312485] pnp 00:03: >Plug and Play ACPI device, IDs INT0800 (active)
[ 0.312525] pnp 00:04: >[mem 0xfed00000-0xfed003ff]
[ 0.312537] pnp 00:04: >Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.312544] pnp 00:05: >[io 0x002e-0x002f]
[ 0.312545] pnp 00:05: >[io 0x004e-0x004f]
[ 0.312547] pnp 00:05: >[io 0x0061]
[ 0.312548] pnp 00:05: >[io 0x0063]
[ 0.312549] pnp 00:05: >[io 0x0065]
[ 0.312550] pnp 00:05: >[io 0x0067]
[ 0.312551] pnp 00:05: >[io 0x0070]
[ 0.312552] pnp 00:05: >[io 0x0080]
[ 0.312553] pnp 00:05: >[io 0x0092]
[ 0.312554] pnp 00:05: >[io 0x00b2-0x00b3]
[ 0.312555] pnp 00:05: >[io 0x0680-0x069f]
[ 0.312556] pnp 00:05: >[io 0x0200-0x020f]
[ 0.312557] pnp 00:05: >[io 0xffff]
[ 0.312559] pnp 00:05: >[io 0xffff]
[ 0.312560] pnp 00:05: >[io 0x0400-0x0453]
[ 0.312561] pnp 00:05: >[io 0x0458-0x047f]
[ 0.312562] pnp 00:05: >[io 0x0500-0x057f]
[ 0.312584] system 00:05: >[io 0x0680-0x069f] has been reserved
[ 0.312586] system 00:05: >[io 0x0200-0x020f] has been reserved
[ 0.312588] system 00:05: >[io 0xffff] has been reserved
[ 0.312589] system 00:05: >[io 0xffff] has been reserved
[ 0.312590] system 00:05: >[io 0x0400-0x0453] has been reserved
[ 0.312592] system 00:05: >[io 0x0458-0x047f] has been reserved
[ 0.312593] system 00:05: >[io 0x0500-0x057f] has been reserved
[ 0.312595] system 00:05: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312599] pnp 00:06: >[io 0x0070-0x0077]
[ 0.312606] pnp 00:06: >[irq 8]
[ 0.312618] pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.312633] pnp 00:07: >[io 0x0454-0x0457]
[ 0.312651] system 00:07: >[io 0x0454-0x0457] has been reserved
[ 0.312653] system 00:07: >Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.312712] pnp 00:08: >[io 0x0000-0xffffffffffffffff disabled]
[ 0.312714] pnp 00:08: >[io 0x0a00-0x0a0f]
[ 0.312715] pnp 00:08: >[io 0x0a30-0x0a3f]
[ 0.312716] pnp 00:08: >[io 0x0a20-0x0a2f]
[ 0.312736] system 00:08: >[io 0x0a00-0x0a0f] has been reserved
[ 0.312737] system 00:08: >[io 0x0a30-0x0a3f] has been reserved
[ 0.312739] system 00:08: >[io 0x0a20-0x0a2f] has been reserved
[ 0.312740] system 00:08: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.312913] pnp 00:09: >[io 0x03f8-0x03ff]
[ 0.312917] pnp 00:09: >[irq 4]
[ 0.312918] pnp 00:09: >[dma 0 disabled]
[ 0.312951] pnp 00:09: >Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.313148] pnp 00:0a: >[io 0x0378-0x037f]
[ 0.313151] pnp 00:0a: >[irq 7]
[ 0.313153] pnp 00:0a: >[dma 0 disabled]
[ 0.313234] pnp 00:0a: >Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.313247] pnp 00:0b: >[io 0x0010-0x001f]
[ 0.313248] pnp 00:0b: >[io 0x0022-0x003f]
[ 0.313249] pnp 00:0b: >[io 0x0044-0x005f]
[ 0.313250] pnp 00:0b: >[io 0x0062-0x0063]
[ 0.313251] pnp 00:0b: >[io 0x0065-0x006f]
[ 0.313252] pnp 00:0b: >[io 0x0072-0x007f]
[ 0.313253] pnp 00:0b: >[io 0x0080]
[ 0.313255] pnp 00:0b: >[io 0x0084-0x0086]
[ 0.313256] pnp 00:0b: >[io 0x0088]
[ 0.313257] pnp 00:0b: >[io 0x008c-0x008e]
[ 0.313258] pnp 00:0b: >[io 0x0090-0x009f]
[ 0.313259] pnp 00:0b: >[io 0x00a2-0x00bf]
[ 0.313260] pnp 00:0b: >[io 0x00e0-0x00ef]
[ 0.313261] pnp 00:0b: >[io 0x04d0-0x04d1]
[ 0.313284] system 00:0b: >[io 0x04d0-0x04d1] has been reserved
[ 0.313286] system 00:0b: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.313291] pnp 00:0c: >[io 0x00f0-0x00ff]
[ 0.313294] pnp 00:0c: >[irq 13]
[ 0.313308] pnp 00:0c: >Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.313451] pnp 00:0d: >[mem 0xfed1c000-0xfed1ffff]
[ 0.313452] pnp 00:0d: >[mem 0xfed10000-0xfed17fff]
[ 0.313453] pnp 00:0d: >[mem 0xfed18000-0xfed18fff]
[ 0.313454] pnp 00:0d: >[mem 0xfed19000-0xfed19fff]
[ 0.313456] pnp 00:0d: >[mem 0xf8000000-0xfbffffff]
[ 0.313457] pnp 00:0d: >[mem 0xfed20000-0xfed3ffff]
[ 0.313458] pnp 00:0d: >[mem 0xfed90000-0xfed93fff]
[ 0.313459] pnp 00:0d: >[mem 0xfed45000-0xfed8ffff]
[ 0.313460] pnp 00:0d: >[mem 0xff000000-0xffffffff]
[ 0.313461] pnp 00:0d: >[mem 0xfee00000-0xfeefffff]
[ 0.313462] pnp 00:0d: >[mem 0xe0000000-0xe0000fff]
[ 0.313497] system 00:0d: >[mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.313499] system 00:0d: >[mem 0xfed10000-0xfed17fff] has been reserved
[ 0.313500] system 00:0d: >[mem 0xfed18000-0xfed18fff] has been reserved
[ 0.313502] system 00:0d: >[mem 0xfed19000-0xfed19fff] has been reserved
[ 0.313503] system 00:0d: >[mem 0xf8000000-0xfbffffff] has been reserved
[ 0.313505] system 00:0d: >[mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.313506] system 00:0d: >[mem 0xfed90000-0xfed93fff] has been reserved
[ 0.313509] system 00:0d: >[mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.313510] system 00:0d: >[mem 0xff000000-0xffffffff] has been reserved
[ 0.313512] system 00:0d: >[mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.313513] system 00:0d: >[mem 0xe0000000-0xe0000fff] has been reserved
[ 0.313515] system 00:0d: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.313600] pnp: PnP ACPI: found 14 devices
[ 0.313601] ACPI: ACPI bus type pnp unregistered
[ 0.313603] PnPBIOS: Disabled by ACPI PNP
[ 0.349146] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.349150] pci 0000:00:01.0: > bridge window [io 0xe000-0xefff]
[ 0.349153] pci 0000:00:01.0: > bridge window [mem 0xf6000000-0xf70fffff]
[ 0.349155] pci 0000:00:01.0: > bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.349157] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
[ 0.349167] pci 0000:00:1c.4: >PCI bridge to [bus 03-03]
[ 0.349170] pci 0000:00:1c.4: > bridge window [io 0xd000-0xdfff]
[ 0.349176] pci 0000:00:1c.4: > bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.349181] pci 0000:00:1e.0: >PCI bridge to [bus 04-04]
[ 0.349211] pci 0000:00:1e.0: >setting latency timer to 64
[ 0.349214] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
[ 0.349215] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
[ 0.349217] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
[ 0.349218] pci_bus 0000:00: >resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.349219] pci_bus 0000:00: >resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.349220] pci_bus 0000:00: >resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.349222] pci_bus 0000:00: >resource 10 [mem 0x000dc000-0x000dffff]
[ 0.349223] pci_bus 0000:00: >resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.349224] pci_bus 0000:00: >resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.349226] pci_bus 0000:00: >resource 13 [mem 0xe0000000-0xfeafffff]
[ 0.349227] pci_bus 0000:01: >resource 0 [io 0xe000-0xefff]
[ 0.349228] pci_bus 0000:01: >resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.349230] pci_bus 0000:01: >resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.349231] pci_bus 0000:03: >resource 0 [io 0xd000-0xdfff]
[ 0.349233] pci_bus 0000:03: >resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.349234] pci_bus 0000:04: >resource 4 [io 0x0000-0x0cf7]
[ 0.349235] pci_bus 0000:04: >resource 5 [io 0x0d00-0xffff]
[ 0.349237] pci_bus 0000:04: >resource 6 [mem 0x000a0000-0x000bffff]
[ 0.349238] pci_bus 0000:04: >resource 7 [mem 0x000d0000-0x000d3fff]
[ 0.349239] pci_bus 0000:04: >resource 8 [mem 0x000d4000-0x000d7fff]
[ 0.349240] pci_bus 0000:04: >resource 9 [mem 0x000d8000-0x000dbfff]
[ 0.349242] pci_bus 0000:04: >resource 10 [mem 0x000dc000-0x000dffff]
[ 0.349243] pci_bus 0000:04: >resource 11 [mem 0x000e0000-0x000e3fff]
[ 0.349244] pci_bus 0000:04: >resource 12 [mem 0x000e4000-0x000e7fff]
[ 0.349246] pci_bus 0000:04: >resource 13 [mem 0xe0000000-0xfeafffff]
[ 0.349266] NET: Registered protocol family 2
[ 0.349301] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.349363] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.349499] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.349561] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.349562] TCP: reno registered
[ 0.349564] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.349567] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.349594] NET: Registered protocol family 1
[ 0.387559] pci 0000:01:00.0: >Boot video device
[ 0.387571] PCI: CLS 64 bytes, default 64
[ 0.387574] DMAR: Host address width 36
[ 0.387575] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.387580] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.387581] DMAR: RMRR base: 0x000000de491000 end: 0x000000de4bbfff
[ 0.387898] audit: initializing netlink socket (disabled)
[ 0.387905] type=2000 audit(1378850075.280:1): initialized
[ 0.399269] Freeing initrd memory: 14716k freed
[ 0.402440] highmem bounce pool size: 64 pages
[ 0.402447] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.403868] VFS: Disk quotas dquot_6.5.2
[ 0.403894] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.404175] fuse init (API version 7.19)
[ 0.404222] msgmni has been set to 1590
[ 0.404431] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.404446] io scheduler noop registered
[ 0.404447] io scheduler deadline registered (default)
[ 0.404451] io scheduler cfq registered
[ 0.404526] pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
[ 0.404639] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.404649] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.404690] intel_idle: MWAIT substates: 0x1120
[ 0.404690] intel_idle: v0.4 model 0x3A
[ 0.404691] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.404747] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.404751] ACPI: Power Button [PWRB]
[ 0.404773] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.404775] ACPI: Power Button [PWRF]
[ 0.404824] ACPI: Fan [FAN0] (off)
[ 0.404841] ACPI: Fan [FAN1] (off)
[ 0.404856] ACPI: Fan [FAN2] (off)
[ 0.404872] ACPI: Fan [FAN3] (off)
[ 0.404887] ACPI: Fan [FAN4] (off)
[ 0.404922] ACPI: Requesting acpi_cpufreq
[ 0.407722] thermal LNXTHERM:00: >registered as thermal_zone0
[ 0.407724] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.407822] thermal LNXTHERM:01: >registered as thermal_zone1
[ 0.407823] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.407846] GHES: HEST is not enabled!
[ 0.407864] isapnp: Scanning for PnP cards...
[ 0.407887] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.428223] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.449145] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.449312] Linux agpgart interface v0.103
[ 0.450037] brd: module loaded
[ 0.450421] loop: module loaded
[ 0.450475] ahci 0000:00:1f.2: >version 3.0
[ 0.450510] ahci 0000:00:1f.2: >irq 41 for MSI/MSI-X
[ 0.450556] ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 0.450558] ahci 0000:00:1f.2: >flags: 64bit ncq led clo pio slum part ems apst
[ 0.450561] ahci 0000:00:1f.2: >setting latency timer to 64
[ 0.455619] scsi0 : ahci
[ 0.455659] scsi1 : ahci
[ 0.455689] scsi2 : ahci
[ 0.455719] scsi3 : ahci
[ 0.455751] scsi4 : ahci
[ 0.455781] scsi5 : ahci
[ 0.455944] ata1: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116100 irq 41
[ 0.455946] ata2: SATA max UDMA/133 abar m2048@0xf7116000 port 0xf7116180 irq 41
[ 0.455946] ata3: DUMMY
[ 0.455947] ata4: DUMMY
[ 0.455948] ata5: DUMMY
[ 0.455949] ata6: DUMMY
[ 0.456104] Fixed MDIO Bus: probed
[ 0.456128] tun: Universal TUN/TAP device driver, 1.6
[ 0.456129] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.456149] PPP generic driver version 2.4.2
[ 0.456171] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.456189] ehci_hcd 0000:00:1a.0: >setting latency timer to 64
[ 0.456191] ehci_hcd 0000:00:1a.0: >EHCI Host Controller
[ 0.456195] ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 1
[ 0.456212] ehci_hcd 0000:00:1a.0: >debug port 2
[ 0.460090] ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
[ 0.460100] ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xf7118000
[ 0.471343] ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
[ 0.471356] usb usb1: >New USB device found, idVendor=1d6b, idProduct=0002
[ 0.471358] usb usb1: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.471359] usb usb1: >Product: EHCI Host Controller
[ 0.471360] usb usb1: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[ 0.471362] usb usb1: >SerialNumber: 0000:00:1a.0
[ 0.471428] hub 1-0:1.0: >USB hub found
[ 0.471431] hub 1-0:1.0: >2 ports detected
[ 0.471470] ehci_hcd 0000:00:1d.0: >setting latency timer to 64
[ 0.471473] ehci_hcd 0000:00:1d.0: >EHCI Host Controller
[ 0.471475] ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 2
[ 0.471491] ehci_hcd 0000:00:1d.0: >debug port 2
[ 0.475374] ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
[ 0.475383] ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xf7117000
[ 0.487306] ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
[ 0.487313] usb usb2: >New USB device found, idVendor=1d6b, idProduct=0002
[ 0.487314] usb usb2: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.487315] usb usb2: >Product: EHCI Host Controller
[ 0.487316] usb usb2: >Manufacturer: Linux 3.5.0-17-generic ehci_hcd
[ 0.487317] usb usb2: >SerialNumber: 0000:00:1d.0
[ 0.487373] hub 2-0:1.0: >USB hub found
[ 0.487375] hub 2-0:1.0: >2 ports detected
[ 0.487409] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.487417] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.487440] xhci_hcd 0000:00:14.0: >setting latency timer to 64
[ 0.487442] xhci_hcd 0000:00:14.0: >xHCI Host Controller
[ 0.487445] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 3
[ 0.487518] xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported
[ 0.487521] xhci_hcd 0000:00:14.0: >irq 16, io mem 0xf7100000
[ 0.487556] xhci_hcd 0000:00:14.0: >irq 42 for MSI/MSI-X
[ 0.487590] usb usb3: >New USB device found, idVendor=1d6b, idProduct=0002
[ 0.487591] usb usb3: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.487593] usb usb3: >Product: xHCI Host Controller
[ 0.487594] usb usb3: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
[ 0.487595] usb usb3: >SerialNumber: 0000:00:14.0
[ 0.487636] xHCI xhci_add_endpoint called for root hub
[ 0.487637] xHCI xhci_check_bandwidth called for root hub
[ 0.487649] hub 3-0:1.0: >USB hub found
[ 0.487654] hub 3-0:1.0: >4 ports detected
[ 0.487687] xhci_hcd 0000:00:14.0: >xHCI Host Controller
[ 0.487689] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 4
[ 0.487702] usb usb4: >New USB device found, idVendor=1d6b, idProduct=0003
[ 0.487703] usb usb4: >New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.487704] usb usb4: >Product: xHCI Host Controller
[ 0.487705] usb usb4: >Manufacturer: Linux 3.5.0-17-generic xhci_hcd
[ 0.487706] usb usb4: >SerialNumber: 0000:00:14.0
[ 0.487744] xHCI xhci_add_endpoint called for root hub
[ 0.487745] xHCI xhci_check_bandwidth called for root hub
[ 0.487756] hub 4-0:1.0: >USB hub found
[ 0.487761] hub 4-0:1.0: >4 ports detected
[ 0.760056] isapnp: No Plug & Play device found
[ 0.762771] usbcore: registered new interface driver libusual
[ 0.762797] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.763193] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.763197] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.763267] mousedev: PS/2 mouse device common for all mice
[ 0.763347] rtc_cmos 00:06: >RTC can wake from S4
[ 0.763444] rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
[ 0.763467] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.763492] device-mapper: uevent: version 1.0.3
[ 0.763527] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.763541] EISA: Probing bus 0 at eisa.0
[ 0.763543] EISA: Cannot allocate resource for mainboard
[ 0.763544] Cannot allocate resource for EISA slot 1
[ 0.763545] Cannot allocate resource for EISA slot 2
[ 0.763546] Cannot allocate resource for EISA slot 3
[ 0.763547] Cannot allocate resource for EISA slot 4
[ 0.763547] Cannot allocate resource for EISA slot 5
[ 0.763548] Cannot allocate resource for EISA slot 6
[ 0.763549] Cannot allocate resource for EISA slot 7
[ 0.763550] Cannot allocate resource for EISA slot 8
[ 0.763550] EISA: Detected 0 cards.
[ 0.763591] cpuidle: using governor ladder
[ 0.763644] cpuidle: using governor menu
[ 0.763645] EFI Variables Facility v0.08 2004-May-17
[ 0.763781] ashmem: initialized
[ 0.763856] TCP: cubic registered
[ 0.763912] NET: Registered protocol family 10
[ 0.764019] NET: Registered protocol family 17
[ 0.764025] Key type dns_resolver registered
[ 0.764069] Using IPI No-Shortcut mode
[ 0.764153] PM: Hibernation image not present or could not be loaded.
[ 0.764157] registered taskstats version 1
[ 0.766223] Key type trusted registered
[ 0.767924] Key type encrypted registered
[ 0.769515] Magic number: 13:887:954
[ 0.769613] rtc_cmos 00:06: >setting system clock to 2013-09-10 21:54:36 UTC (1378850076)
[ 0.770107] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.770108] EDD information not available.
[ 0.774688] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.774717] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.775147] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[ 0.775154] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node f74308b8), AE_NOT_FOUND (20120320/psparse-536)
[ 0.775549] ata2.00: ATA-8: ST2000DM001-1CH164, CC44, max UDMA/133
[ 0.775552] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.776064] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[ 0.776070] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node f74308b8), AE_NOT_FOUND (20120320/psparse-536)
[ 0.776434] ata2.00: configured for UDMA/133
[ 0.777165] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[ 0.777170] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node f7430870), AE_NOT_FOUND (20120320/psparse-536)
[ 0.777180] ata1.00: ATAPI: HL-DT-ST DVDRAM GH24NS95, RN00, max UDMA/133
[ 0.778753] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20120320/psargs-359)
[ 0.778758] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT0._GTF] (Node f7430870), AE_NOT_FOUND (20120320/psparse-536)
[ 0.778769] ata1.00: configured for UDMA/133
[ 0.782654] usb 1-1: >new high-speed USB device number 2 using ehci_hcd
[ 0.793975] scsi 0:0:0:0: >CD-ROM HL-DT-ST DVDRAM GH24NS95 RN00 PQ: 0 ANSI: 5
[ 0.804231] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.804234] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.804420] sr 0:0:0:0: >Attached scsi CD-ROM sr0
[ 0.804506] sr 0:0:0:0: >Attached scsi generic sg0 type 5
[ 0.804799] scsi 1:0:0:0: >Direct-Access ATA ST2000DM001-1CH1 CC44 PQ: 0 ANSI: 5
[ 0.804916] sd 1:0:0:0: >Attached scsi generic sg1 type 0
[ 0.804973] sd 1:0:0:0: >[sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 0.804975] sd 1:0:0:0: >[sda] 4096-byte physical blocks
[ 0.805162] sd 1:0:0:0: >[sda] Write Protect is off
[ 0.805165] sd 1:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[ 0.805251] sd 1:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.852208] sda: sda1 sda2 < sda5 >
[ 0.853063] sd 1:0:0:0: >[sda] Attached SCSI disk
[ 0.853260] Freeing unused kernel memory: 756k freed
[ 0.853434] Write protecting the kernel text: 5960k
[ 0.853483] Write protecting the kernel read-only data: 2424k
[ 0.853483] NX-protecting the kernel data: 4280k
[ 0.863471] udevd[111]: starting version 175
[ 0.875373] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.880331] r8169 0000:03:00.0: >irq 43 for MSI/MSI-X
[ 0.880479] r8169 0000:03:00.0: >eth0: RTL8168evl/8111evl at 0xf841c000, 90:2b:34:9f:59:02, XID 0c900800 IRQ 43
[ 0.880481] r8169 0000:03:00.0: >eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.914769] usb 1-1: >New USB device found, idVendor=8087, idProduct=0024
[ 0.914775] usb 1-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.915166] hub 1-1:1.0: >USB hub found
[ 0.915253] hub 1-1:1.0: >6 ports detected
[ 1.026090] usb 2-1: >new high-speed USB device number 2 using ehci_hcd
[ 1.158220] usb 2-1: >New USB device found, idVendor=8087, idProduct=0024
[ 1.158224] usb 2-1: >New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.158499] hub 2-1:1.0: >USB hub found
[ 1.158567] hub 2-1:1.0: >6 ports detected
[ 1.325413] usb 3-1: >new high-speed USB device number 2 using xhci_hcd
[ 1.342963] usb 3-1: >New USB device found, idVendor=0bda, idProduct=8176
[ 1.342967] usb 3-1: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.342970] usb 3-1: >Product: 802.11n WLAN Adapter
[ 1.342972] usb 3-1: >Manufacturer: Realtek
[ 1.342975] usb 3-1: >SerialNumber: 00e04c000001
[ 1.343181] usb 3-1: >ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 1.343185] usb 3-1: >ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 1.343187] usb 3-1: >ep 0x3 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 1.385271] Refined TSC clocksource calibration: 3192.747 MHz.
[ 1.385276] Switching to clocksource tsc
[ 1.413351] usb 1-1.3: >new low-speed USB device number 3 using ehci_hcd
[ 1.510899] usb 1-1.3: >New USB device found, idVendor=046d, idProduct=c51b
[ 1.510903] usb 1-1.3: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.510906] usb 1-1.3: >Product: USB Receiver
[ 1.510908] usb 1-1.3: >Manufacturer: Logitech
[ 1.519398] usbcore: registered new interface driver usbhid
[ 1.519401] usbhid: USB HID core driver
[ 1.520649] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input2
[ 1.520706] hid-generic 0003:046D:C51B.0001: >input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.3/input0
[ 1.521342] hid-generic 0003:046D:C51B.0002: >hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.3/input1
[ 1.585003] usb 1-1.5: >new low-speed USB device number 4 using ehci_hcd
[ 1.602042] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 1.602044] EXT4-fs (sda1): write access will be enabled during recovery
[ 1.684979] usb 1-1.5: >New USB device found, idVendor=0518, idProduct=0001
[ 1.684984] usb 1-1.5: >New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.684987] usb 1-1.5: >Product: USB-compliant keyboard
[ 1.684989] usb 1-1.5: >Manufacturer: Plus More Enterprise LTD.
[ 1.688253] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input3
[ 1.688351] hid-generic 0003:0518:0001.0003: >input,hidraw2: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1a.0-1.5/input0
[ 1.691634] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/input/input4
[ 1.691940] hid-generic 0003:0518:0001.0004: >input,hidraw3: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1a.0-1.5/input1
[ 2.346464] EXT4-fs (sda1): recovery complete
[ 2.351940] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.032032] Adding 8332284k swap on /dev/sda5. Priority:-1 extents:1 across:8332284k
[ 8.035295] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.055467] udevd[372]: starting version 175
[ 8.086216] wmi: Mapper loaded
[ 8.087391] [drm] Initialized drm 1.1.0 20060810
[ 8.088356] mei 0000:00:16.0: >setting latency timer to 64
[ 8.088403] mei 0000:00:16.0: >irq 44 for MSI/MSI-X
[ 8.089263] lp: driver loaded but no devices found
[ 8.090373] [drm] nouveau 0000:01:00.0: Detected an NVe0 generation card (0x0e6060a1)
[ 8.092586] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[ 8.092592] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 8.092592] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS
[ 8.094544] ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 8.094549] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.094550] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 8.094552] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 8.094555] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.094558] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \LED_ 1 (20120320/utaddress-251)
[ 8.094560] ACPI Warning: 0x00000500-0x0000053f SystemIO conflicts with Region \GPIO 2 (20120320/utaddress-251)
[ 8.094562] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.094563] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.111091] parport_pc 00:0a: >reported by Plug and Play ACPI
[ 8.111179] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 8.135143] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x12
[ 8.191108] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 8.191110] [drm] nouveau 0000:01:00.0: Using VBIOS from PROM
[ 8.191111] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 8.191113] [drm] nouveau 0000:01:00.0: Bios version 80.06.21.00
[ 8.191115] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 8.191277] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[ 8.191278] [drm] nouveau 0000:01:00.0: DCB version 4.0
[ 8.191280] [drm] nouveau 0000:01:00.0: DCB outp 01: 02000f00 00020030
[ 8.191281] [drm] nouveau 0000:01:00.0: DCB outp 02: 08011f82 0f420030
[ 8.191282] [drm] nouveau 0000:01:00.0: DCB outp 03: 02022f62 0f420010
[ 8.191283] [drm] nouveau 0000:01:00.0: DCB conn 00: 00000000
[ 8.191284] [drm] nouveau 0000:01:00.0: DCB conn 01: 00002131
[ 8.191285] [drm] nouveau 0000:01:00.0: DCB conn 02: 00010263
[ 8.191288] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x886B
[ 8.194393] ppdev: user-space parallel port driver
[ 8.198772] snd_hda_intel 0000:00:1b.0: >irq 45 for MSI/MSI-X
[ 8.209924] lp0: using parport0 (interrupt-driven).
[ 8.213479] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x12
[ 8.214229] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x12
[ 8.215009] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x12
[ 8.215748] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 8.218773] rtw driver version=v3.4.4_4749.20121105
[ 8.218775] Build at: Sep 10 2013 22:37:56
[ 8.218792] register rtw_netdev_ops to netdev_ops
[ 8.218793] CHIP TYPE: RTL8188C_8192C
[ 8.218794]
[ 8.218794] usb_endpoint_descriptor(0):
[ 8.218795] bLength=7
[ 8.218796] bDescriptorType=5
[ 8.218797] bEndpointAddress=81
[ 8.218797] wMaxPacketSize=200
[ 8.218798] bInterval=0
[ 8.218799] RT_usb_endpoint_is_bulk_in = 1
[ 8.218799]
[ 8.218799] usb_endpoint_descriptor(1):
[ 8.218800] bLength=7
[ 8.218801] bDescriptorType=5
[ 8.218801] bEndpointAddress=2
[ 8.218802] wMaxPacketSize=200
[ 8.218802] bInterval=0
[ 8.218803] RT_usb_endpoint_is_bulk_out = 2
[ 8.218803]
[ 8.218803] usb_endpoint_descriptor(2):
[ 8.218804] bLength=7
[ 8.218805] bDescriptorType=5
[ 8.218805] bEndpointAddress=3
[ 8.218806] wMaxPacketSize=200
[ 8.218807] bInterval=0
[ 8.218807] RT_usb_endpoint_is_bulk_out = 3
[ 8.218808]
[ 8.218808] usb_endpoint_descriptor(3):
[ 8.218808] bLength=7
[ 8.218809] bDescriptorType=5
[ 8.218810] bEndpointAddress=84
[ 8.218810] wMaxPacketSize=40
[ 8.218811] bInterval=1
[ 8.218811] RT_usb_endpoint_is_int_in = 4, Interval = 1
[ 8.218812] nr_endpoint=4, in_num=2, out_num=2
[ 8.218812]
[ 8.218813] USB_SPEED_HIGH
[ 8.218838] Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C.
[ 8.218840] RF_Type is 3!!
[ 8.218952] EEPROM type is E-FUSE
[ 8.218953] ====> ReadAdapterInfo8192C
[ 8.218992] Boot from EFUSE, Autoload OK !
[ 8.220161] kvm: disabled by bios
[ 8.221065] [drm] nouveau 0000:01:00.0: 0x8B9E: Init table command not found: 0xA9
[ 8.221067] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x904B
[ 8.223608] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xAB24
[ 8.223609] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xAB25
[ 8.223617] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xABA9
[ 8.223618] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xAC0E
[ 8.226744] [TTM] Zone kernel: Available graphics memory: 407632 kiB
[ 8.226745] [TTM] Zone highmem: Available graphics memory: 4117860 kiB
[ 8.226746] [TTM] Initializing pool allocator
[ 8.226749] [TTM] Initializing DMA pool allocator
[ 8.226754] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM (GDDR5)
[ 8.228572] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 8.250719] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 8.250783] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 8.250852] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 8.250949] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.250996] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.252817] [drm] nouveau 0000:01:00.0: PGRAPH: unsupported chipset, please report!
[ 8.253009] [drm] nouveau 0000:01:00.0: unknown connector type 63
[ 8.253237] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.253238] [drm] No driver support for vblank timestamp query.
[ 8.253302] [drm] nouveau 0000:01:00.0: voltage table 0x50 unknown
[ 8.267828] EEPROMVID = 0x0bda
[ 8.267829] EEPROMPID = 0x8176
[ 8.267829] EEPROMCustomerID : 0x00
[ 8.267830] EEPROMSubCustomerID: 0x00
[ 8.267830] RT_CustomerID: 0x00
[ 8.267832] _ReadMACAddress MAC Address from EFUSE = 64:70:02:28:e9:38
[ 8.267833] EEPROMRegulatory = 0x0
[ 8.267833] _ReadBoardType(0)
[ 8.267834] BT Coexistance = disable
[ 8.267835] RT_ChannelPlan: 0x02
[ 8.267836] _ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0)
[ 8.267837] ### PS params=> power_mgnt(1),usbss_enable(0) ###
[ 8.267837] ### AntDivCfg(0)
[ 8.267838] readAdapterInfo_8192CU(): REPLACEMENT = 1
[ 8.267839] <==== ReadAdapterInfo8192C in 48 ms
[ 8.267904] rtw_macaddr_cfg MAC Address = 64:70:02:28:e9:38
[ 8.267905] MAC Address from pnetdev->dev_addr= 64:70:02:28:e9:38
[ 8.268013] bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
[ 8.268030] usbcore: registered new interface driver rtl8192cu
[ 8.324688] kvm: disabled by bios
[ 8.428752] kvm: disabled by bios
[ 8.541850] kvm: disabled by bios
[ 8.568951] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[ 8.568953] [drm] nouveau 0000:01:00.0: 0: core 162MHz shader 324MHz memory 648MHz voltage 100mV
[ 8.568954] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 1080MHz voltage 80mV
[ 8.568956] [drm] nouveau 0000:01:00.0: 3: core 1350MHz shader 2700MHz memory 1080MHz voltage 40mV
[ 8.568957] [drm] nouveau 0000:01:00.0: c:
[ 8.641279] [drm] nouveau 0000:01:00.0: allocated 1920x1080 fb: 0x2e0000, bo ebdb9000
[ 8.641367] fbcon: nouveaufb (fb0) is primary device
[ 8.641446] Console: switching to colour frame buffer device 240x67
[ 8.641486] fb0: nouveaufb frame buffer device
[ 8.641487] drm: registered panic notifier
[ 8.641490] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[ 8.641548] hda_intel: Disabling MSI
[ 8.641555] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[ 9.053218] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.127867] init: failsafe main process (799) killed by TERM signal
[ 9.171737] Bluetooth: Core ver 2.16
[ 9.171750] NET: Registered protocol family 31
[ 9.171751] Bluetooth: HCI device and connection manager initialized
[ 9.171901] Bluetooth: HCI socket layer initialized
[ 9.171902] Bluetooth: L2CAP socket layer initialized
[ 9.171905] Bluetooth: SCO socket layer initialized
[ 9.173028] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.173030] Bluetooth: BNEP filters: protocol multicast
[ 9.178474] Bluetooth: RFCOMM TTY layer initialized
[ 9.178477] Bluetooth: RFCOMM socket layer initialized
[ 9.178478] Bluetooth: RFCOMM ver 1.11
[ 9.188370] type=1400 audit(1378850084.934:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=888 comm="apparmor_parser"
[ 9.188379] type=1400 audit(1378850084.934:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=886 comm="apparmor_parser"
[ 9.188386] type=1400 audit(1378850084.934:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=887 comm="apparmor_parser"
[ 9.188394] type=1400 audit(1378850084.934:5): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=889 comm="apparmor_parser"
[ 9.188595] type=1400 audit(1378850084.934:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper//chromium_browser" pid=888 comm="apparmor_parser"
[ 9.188601] type=1400 audit(1378850084.934:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=886 comm="apparmor_parser"
[ 9.188609] type=1400 audit(1378850084.934:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=887 comm="apparmor_parser"
[ 9.188669] type=1400 audit(1378850084.934:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=889 comm="apparmor_parser"
[ 9.188822] type=1400 audit(1378850084.934:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=889 comm="apparmor_parser"
[ 9.190641] type=1400 audit(1378850084.934:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=894 comm="apparmor_parser"
[ 9.239533] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 9.239649] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 9.239762] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 9.239902] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 9.265857] bDriverStopped=1
[ 9.266139] +871x_drv - drv_open, bup=0
[ 9.268326] ===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC
[ 9.268330] FirmwareDownload92C accquire FW from embedded image
[ 9.268332] fw_ver=v80, fw_subver=0, sig=0x88c0
[ 9.312849] fw download ok!
[ 9.312852] Set RF Chip ID to RF_6052 and RF type to 1T1R.
[ 9.592843] IQK:Start!!!
[ 9.596958] Path A IQK Success!!
[ 9.600039] Path A IQK Success!!
[ 9.601514] IQK: final_candidate is 0
[ 9.601516] IQK: RegE94=101 RegE9C=10 RegEA4=fe RegEAC=3fe RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0
[ 9.601516] Path A IQ Calibration Success !
[ 9.707590] pdmpriv->TxPowerTrackControl = 1
[ 9.709143] MAC Address from REG_MACID = 64:70:02:28:e9:38
[ 9.709144] rtl8192cu_hal_init in 444ms
[ 9.709145] MAC Address = 64:70:02:28:e9:38
[ 9.711071] -871x_drv - drv_open, bup=1
[ 9.711157] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.711318] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.711330] set_mode = IW_MODE_INFRA
[ 9.807093] r8169 0000:03:00.0: >eth0: link down
[ 9.807198] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.807413] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.815294] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
[ 9.815299] set_mode = IW_MODE_INFRA
[ 9.815335] =>rtw_wx_set_essid
[ 9.815336] ssid=g\xffffffc6isQ\xffffffffJ\xffffffec)\xffffffcd\xffffffba\xffffffba\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\x1b\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9f\xffffffc9\xffffff9a\xffffff9a l\xffffffcd\xfffffff6, len=32
[ 9.815337] Set SSID under fw_state=0x00000008
[ 9.815338] <=rtw_wx_set_essid, ret -1
[ 9.822161] [rtw_wx_set_pmkid] IW_PMKSA_FLUSH!
[ 11.128929] survey done event(1)
[ 11.141404] IW_SCAN_THIS_ESSID, ssid=PlusnetWireless882FD0, len=21
[ 12.441848] survey done event(5)
[ 12.442071] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
[ 12.442074] set_mode = IW_MODE_INFRA
[ 12.442079]
[ 12.442079] wpa_ie(length:22):
[ 12.442081] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x02
[ 12.442082] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
[ 12.442083] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
[ 12.442088] =>rtw_wx_set_essid
[ 12.442089] ssid=PlusnetWireless882FD0, len=21
[ 12.442091] Set SSID under fw_state=0x00000008
[ 12.442093] [by_bssid:0][assoc_ssid:PlusnetWireless882FD0][to_roaming:0] new candidate: PlusnetWireless882FD0(00:26:44:88:2f:d0) rssi:-75
[ 12.442095] rtw_select_and_join_from_scanned_queue: candidate: PlusnetWireless882FD0(00:26:44:88:2f:d0)
[ 12.442097] rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
[ 12.442098] link to Ralink AP
[ 12.442099] <=rtw_wx_set_essid, ret 0
[ 12.442102] Set BSSID under fw_state=0x00000088
[ 12.567303] link to Ralink AP
[ 12.567309] issue_deauth to 00:26:44:88:2f:d0
[ 12.571607] OnAuthClient
[ 12.571615] network.SupportedRates[0]=82
[ 12.571617] network.SupportedRates[1]=84
[ 12.571618] network.SupportedRates[2]=8B
[ 12.571620] network.SupportedRates[3]=96
[ 12.571621] network.SupportedRates[4]=12
[ 12.571623] network.SupportedRates[5]=24
[ 12.571624] network.SupportedRates[6]=48
[ 12.571625] network.SupportedRates[7]=6C
[ 12.571627] network.SupportedRates[8]=0C
[ 12.571628] network.SupportedRates[9]=18
[ 12.571630] network.SupportedRates[10]=30
[ 12.571631] network.SupportedRates[11]=60
[ 12.571633] bssrate_len = 12
[ 12.582293] OnAssocRsp
[ 12.582300] report_join_res(3)
[ 12.582302] rtw_joinbss_update_network
[ 12.582305] +rtw_update_ht_cap()
[ 12.582310] rtw_joinbss_update_stainfo
[ 12.582405] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
[ 12.582463] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 12.582741] WMM(0): 0, a42b
[ 12.582788] WMM(1): 0, a44f
[ 12.582824] WMM(2): 0, 5e4322
[ 12.582881] WMM(3): 0, 2f3222
[ 12.582884] HTOnAssocRsp
[ 12.584633] update raid entry, mask=0xfffff, arg=0x80
[ 12.585109] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
[ 12.585388] SetFwRsvdPagePkt
[ 12.585395] Set RSVD page location to Fw.
[ 12.585747] =>mlmeext_joinbss_event_callback
[ 12.596644] OnAction_back
[ 12.596648] OnAction_back, action=0
[ 12.596650] issue_action_BA, category=3, action=1, status=0
[ 12.609563]
[ 12.609563] ~~~~stastakey:unicastkey
[ 12.609597]
[ 12.609597] ~~~~stastakey:groupkey
[ 12.609599] ==> rtw_set_key algorithm(2),keyid(1),key_mask(2)
[ 12.727639] OnAction_back
[ 12.727644] OnAction_back, action=0
[ 12.727647] issue_action_BA, category=3, action=1, status=0
[ 13.710730] rtl8192c_dm_RF_Saving(): RF_Normal
[ 15.311519] survey done event(2)
[ 15.514131] OnAction_back
[ 15.514135] OnAction_back, action=2
[ 15.514137] OnAction_back(): DELBA: 0(0)
[ 15.514140] OnAction_back
[ 15.514141] OnAction_back, action=2
[ 15.514143] OnAction_back(): DELBA: 0(0)
[ 25.706079] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 25.706085] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 27.705518] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 27.705557] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 29.705228] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 29.705234] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 56.995155] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 56.995205] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 58.348305] survey done event(2)
[ 59.712097] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 59.712102] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 77.887912] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 77.887956] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 81.717166] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 81.717171] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 119.878436] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 119.878465] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 121.232985] survey done event(3)
[ 121.726293] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 121.726297] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 123.726810] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 123.726845] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 125.727241] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 125.727246] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 142.349789] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 142.349828] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 143.731366] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 143.731372] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 163.735952] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 163.736003] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 167.736867] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 167.736873] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 202.733017] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 202.733058] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 204.086295] survey done event(2)
[ 205.745569] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 205.745574] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 305.551861] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 305.551902] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 306.904257] survey done event(3)
[ 307.768935] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 307.768940] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 354.725293]
[ 354.725293] ~~~~stastakey:groupkey
[ 354.725299] ==> rtw_set_key algorithm(2),keyid(1),key_mask(2)
[ 354.725838] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 354.725877] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 355.779933] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 355.779939] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 425.339366] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 425.339429] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 426.692247] survey done event(4)
[ 427.796423] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 427.796429] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 432.072686] rx bc/mc packets, to perform sw rtw_tkip_decrypt
[ 434.824364]
[ 434.824364] ~~~~stastakey:groupkey
[ 434.824369] ==> rtw_set_key algorithm(2),keyid(1),key_mask(2)
[ 434.824989] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 434.825028] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 437.798715] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 437.798722] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 505.326420] rx bc/mc packets, to perform sw rtw_tkip_decrypt
[ 545.126874] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 545.126939] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 546.480167] survey done event(3)
[ 547.823905] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 547.823910] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 563.044239]
[ 563.044239] ~~~~stastakey:groupkey
[ 563.044245] ==> rtw_set_key algorithm(2),keyid(2),key_mask(6)
[ 563.044827] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 563.044867] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 565.828015] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 565.828020] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 595.964791] usb 3-2: >new high-speed USB device number 3 using xhci_hcd
[ 595.985694] usb 3-2: >New USB device found, idVendor=0951, idProduct=1689
[ 595.985699] usb 3-2: >New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 595.985702] usb 3-2: >Product: DataTraveler SE9
[ 595.985704] usb 3-2: >Manufacturer: Kingston
[ 595.985707] usb 3-2: >SerialNumber: 00241D8CE3F7BC5189310365
[ 595.986007] usb 3-2: >ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 595.986012] usb 3-2: >ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 596.029991] usbcore: registered new interface driver uas
[ 596.031508] Initializing USB Mass Storage driver...
[ 596.031668] scsi6 : usb-storage 3-2:1.0
[ 596.031747] usbcore: registered new interface driver usb-storage
[ 596.031748] USB Mass Storage support registered.
[ 597.106869] scsi 6:0:0:0: >Direct-Access Kingston DataTraveler SE9 PMAP PQ: 0 ANSI: 4
[ 597.108198] sd 6:0:0:0: >Attached scsi generic sg2 type 0
[ 598.219502] sd 6:0:0:0: >[sdb] 15458304 512-byte logical blocks: (7.91 GB/7.37 GiB)
[ 598.219768] sd 6:0:0:0: >[sdb] Write Protect is off
[ 598.219773] sd 6:0:0:0: >[sdb] Mode Sense: 23 00 00 00
[ 598.220001] sd 6:0:0:0: >[sdb] No Caching mode page present
[ 598.220006] sd 6:0:0:0: >[sdb] Assuming drive cache: write through
[ 598.222013] sd 6:0:0:0: >[sdb] No Caching mode page present
[ 598.222018] sd 6:0:0:0: >[sdb] Assuming drive cache: write through
[ 598.267233] sdb: sdb1
[ 598.268881] sd 6:0:0:0: >[sdb] No Caching mode page present
[ 598.268885] sd 6:0:0:0: >[sdb] Assuming drive cache: write through
[ 598.268888] sd 6:0:0:0: >[sdb] Attached SCSI removable disk
[ 615.558653] OnAction_back
[ 615.558658] OnAction_back, action=0
[ 615.558661] issue_action_BA, category=3, action=1, status=0
[ 615.827655] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 615.827710] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 619.826618] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 619.826624] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 664.878867] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 664.878917] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 665.815535] rtl8192c_dm_RF_Saving(): RF_Save
[ 666.231075] survey done event(0)
[ 667.813793] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 667.814392] rtl8192c_dm_RF_Saving(): RF_Normal
[ 667.814397] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 784.607257] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 784.607322] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 785.782996] rtl8192c_dm_RF_Saving(): RF_Save
[ 785.959100] survey done event(1)
[ 787.781068] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 787.781548] rtl8192c_dm_RF_Saving(): RF_Normal
[ 787.781553] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 890.361798] OnAction_back
[ 890.361803] OnAction_back, action=2
[ 890.361805] OnAction_back(): DELBA: 0(0)
[ 891.740049] OnAction_back
[ 891.740051] OnAction_back, action=0
[ 891.740053] issue_action_BA, category=3, action=1, status=0
[ 891.752865] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 891.752902] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 891.759416] rtw_issue_addbareq_cmd, p=0
[ 891.759450] issue_action_BA, category=3, action=0, status=0
[ 891.759452] BA_starting_seqctrl = 330 for TID=0
[ 891.795974] OnAction_back
[ 891.795977] OnAction_back, action=1
[ 891.795978] agg_enable for TID=0
[ 895.753317] rtl8192c_dm_RF_Saving(): RF_Save
[ 897.751347] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 897.751823] rtl8192c_dm_RF_Saving(): RF_Normal
[ 897.751828] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 904.335751] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 904.335809] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 905.687523] survey done event(4)
[ 905.749057] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 905.749065] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 953.322922]
[ 953.322922] ~~~~stastakey:groupkey
[ 953.322929] ==> rtw_set_key algorithm(2),keyid(2),key_mask(6)
[ 953.323518] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 953.323556] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 953.737659] rtl8192c_dm_RF_Saving(): RF_Save
[ 955.697206] OnAction_back
[ 955.697211] OnAction_back, action=0
[ 955.697214] issue_action_BA, category=3, action=1, status=0
[ 958.474453] OnDeAuth Reason code(3)
[ 958.474458] OnDeAuth, STA:00:26:44:88:2f:d0
[ 958.474460] receive_disconnect
[ 958.474462] report_del_sta_event: delete STA
[ 958.474469] OnAction_back
[ 958.476528] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
[ 959.735601] rtl8192c_dm_RF_Saving(): RF_Normal
[ 959.875796] survey done event(3)
[ 959.876145] wpa_set_auth_algs, AUTH_ALG_OPEN_SYSTEM
[ 959.876150] set_mode = IW_MODE_INFRA
[ 959.876161]
[ 959.876161] wpa_ie(length:22):
[ 959.876165] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x02
[ 959.876167] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
[ 959.876169] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
[ 959.876180] =>rtw_wx_set_essid
[ 959.876182] ssid=PlusnetWireless882FD0, len=21
[ 959.876195] Set SSID under fw_state=0x00000008
[ 959.876199] [by_bssid:0][assoc_ssid:PlusnetWireless882FD0][to_roaming:0] new candidate: PlusnetWireless882FD0(00:26:44:88:2f:d0) rssi:-75
[ 959.876202] rtw_select_and_join_from_scanned_queue: candidate: PlusnetWireless882FD0(00:26:44:88:2f:d0)
[ 959.876207] rtw_restructure_ht_ie IEEE80211_HT_CAP_MAX_AMSDU is set
[ 959.876209] link to Ralink AP
[ 959.876212] <=rtw_wx_set_essid, ret 0
[ 959.876216] Set BSSID under fw_state=0x00000088
[ 959.963546] link to Ralink AP
[ 959.963551] issue_deauth to 00:26:44:88:2f:d0
[ 959.967976] OnAuthClient
[ 959.967984] network.SupportedRates[0]=82
[ 959.967986] network.SupportedRates[1]=84
[ 959.967987] network.SupportedRates[2]=8B
[ 959.967989] network.SupportedRates[3]=96
[ 959.967990] network.SupportedRates[4]=12
[ 959.967991] network.SupportedRates[5]=24
[ 959.967993] network.SupportedRates[6]=48
[ 959.967994] network.SupportedRates[7]=6C
[ 959.967995] network.SupportedRates[8]=0C
[ 959.967997] network.SupportedRates[9]=18
[ 959.967998] network.SupportedRates[10]=30
[ 959.968000] network.SupportedRates[11]=60
[ 959.968002] bssrate_len = 12
[ 959.976926] OnAssocRsp
[ 959.976932] report_join_res(3)
[ 959.976934] rtw_joinbss_update_network
[ 959.976937] +rtw_update_ht_cap()
[ 959.976941] rtw_joinbss_update_stainfo
[ 959.976986] HW_VAR_BASIC_RATE: BrateCfg(0x15d)
[ 959.977267] WMM(0): 0, a42b
[ 959.977306] WMM(1): 0, a44f
[ 959.977345] WMM(2): 0, 5e4322
[ 959.977384] WMM(3): 0, 2f3222
[ 959.977386] HTOnAssocRsp
[ 959.979127] update raid entry, mask=0xfffff, arg=0x80
[ 959.979603] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
[ 959.979882] SetFwRsvdPagePkt
[ 959.979888] Set RSVD page location to Fw.
[ 959.980241] =>mlmeext_joinbss_event_callback
[ 959.990274] OnAction_back
[ 959.990278] OnAction_back, action=0
[ 959.990280] issue_action_BA, category=3, action=1, status=0
[ 960.004909]
[ 960.004909] ~~~~stastakey:unicastkey
[ 960.004986]
[ 960.004986] ~~~~stastakey:groupkey
[ 960.004997] ==> rtw_set_key algorithm(2),keyid(2),key_mask(4)
[ 961.054302] OnAction_back
[ 961.054308] OnAction_back, action=0
[ 961.054311] issue_action_BA, category=3, action=1, status=0
[ 961.735539] rtl8192c_dm_RF_Saving(): RF_Save
[ 965.327291] OnAction_back
[ 965.327297] OnAction_back, action=2
[ 965.327299] OnAction_back(): DELBA: 0(0)
[ 965.327302] OnAction_back
[ 965.327304] OnAction_back, action=2
[ 965.327305] OnAction_back(): DELBA: 0(0)
[ 965.734223] rtl8192c_dm_RF_Saving(): RF_Normal
[ 971.731187] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 971.731193] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 1024.063560] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 1024.063662] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 1025.415036] survey done event(4)
[ 1025.716575] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 1025.716583] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 1029.715485] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 1029.715549] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 1031.716489] rtl8192c_dm_RF_Saving(): RF_Save
[ 1033.714393] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 1033.714868] rtl8192c_dm_RF_Saving(): RF_Normal
[ 1033.714873] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 1034.545804]
[ 1034.545804] ~~~~stastakey:groupkey
[ 1034.545809] ==> rtw_set_key algorithm(2),keyid(2),key_mask(4)
[ 1034.546433] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 1034.546483] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 1035.713869] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 1035.713875] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 1047.710603] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 1047.710667] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 1049.710050] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 1049.710056] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
[ 1109.693757] rtw_set_ps_mode(): Busy Traffic , Leave 802.11 power save..
[ 1109.693789] rtl8192c_set_FwPwrMode_cmd(): Mode = 0, SmartPS = 0
[ 1110.688595] OnAction_back
[ 1110.688599] OnAction_back, action=0
[ 1110.688601] issue_action_BA, category=3, action=1, status=0
[ 1111.694819] rtl8192c_dm_RF_Saving(): RF_Save
[ 1111.695888] rtw_issue_addbareq_cmd, p=0
[ 1111.695927] issue_action_BA, category=3, action=0, status=0
[ 1111.695932] BA_starting_seqctrl = 235 for TID=0
[ 1111.703363] OnAction_back
[ 1111.703366] OnAction_back, action=1
[ 1111.703367] agg_enable for TID=0
[ 1112.197122] rx bc/mc packets, to perform sw rtw_tkip_decrypt
[ 1115.692128] rtw_set_ps_mode(): Enter 802.11 power save mode...
[ 1115.692519] rtl8192c_dm_RF_Saving(): RF_Normal
[ 1115.692520] rtl8192c_set_FwPwrMode_cmd(): Mode = 1, SmartPS = 2
Realtek RTL8188cus usb wifi poor/no connection
Adv Reply
Originally Posted by chili555
Bookmarks