I really appreciate you taking time helping me!
I could buy a switch if this won't work so don't spend too much time on this if you don't want to
I've done what you said and from the server I can ping both 192.168.2.1 and 192.168.2.2.
But how do I access it from another computer in the LAN through the router (192.168.1.2)?
I have uncommented net.ipv4.ip_forward=1 and rebooted. UFW is turned off btw.
Will check the router settings.
Heres my "route -n"
Here's my /etc/network/interfaces:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.1.2 0.0.0.0 UG 100 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
The Raid Card has these settings:
# The loopback network interface
iface lo inet loopback
# The default network card connected to router
iface eth0 inet dhcp
# The extra NIC for connection to Areca Raid
iface eth1 inet static
Local IP: 192.168.2.2
Gateway IP: 192.168.2.1 # tried both server IP and router IP
Subnet Mask: 255.255.255.0
--- --- ---
That adapter won't allow me to use both connection simultaneously. It will only work with one NIC at a time.
Originally Posted by scbingham
I could use something like this: http://oi40.tinypic.com/2prem3d.jpg . One at the router and one at the server but it only supports 100 MBit/s. Thanks for helping though