Code:
Module Size Used by
arc4 12615 2
rt2800pci 18582 0
rt2800lib 66507 1 rt2800pci
nouveau 939088 1
rt2x00pci 14519 1 rt2800pci
rt2x00lib 54869 3 rt2x00pci,rt2800lib,rt2800pci
mac80211 606457 3 rt2x00lib,rt2x00pci,rt2800lib
mxm_wmi 13021 1 nouveau
wmi 19070 2 mxm_wmi,nouveau
video 19390 1 nouveau
ttm 83187 1 nouveau
drm_kms_helper 49394 1 nouveau
psmouse 95870 0
cfg80211 510937 2 mac80211,rt2x00lib
serio_raw 13215 0
snd_mpu401 14092 0
ns558 12666 0
drm 286313 3 ttm,drm_kms_helper,nouveau
snd_mpu401_uart 14169 1 snd_mpu401
snd_rawmidi 30180 1 snd_mpu401_uart
gameport 15515 2 ns558
snd_seq_device 14497 1 snd_rawmidi
eeprom_93cx6 13344 1 rt2800pci
crc_ccitt 12707 1 rt2800lib
k8temp 12978 0
i2c_algo_bit 13413 1 nouveau
amd64_edac_mod 23772 0
edac_core 62003 2 amd64_edac_mod
edac_mce_amd 23114 1 amd64_edac_mod
snd_intel8x0 38139 0
snd_ac97_codec 130268 1 snd_intel8x0
shpchp 37032 0
ac97_bus 12766 1 snd_ac97_codec
snd_pcm 97451 2 snd_ac97_codec,snd_intel8x0
snd_page_alloc 18710 2 snd_intel8x0,snd_pcm
snd_timer 29425 1 snd_pcm
joydev 17377 0
snd 68876 8 snd_ac97_codec,snd_intel8x0,snd_timer,snd_pcm,snd_rawmidi,snd_mpu401_uart,snd_seq_device,snd_mpu401
lp 17759 0
i2c_nforce2 13020 0
soundcore 12680 1 snd
parport 46345 1 lp
mac_hid 13205 0
hid_generic 12540 0
usbhid 47074 0
hid 101002 2 hid_generic,usbhid
floppy 69449 0
pata_acpi 13038 0
forcedeth 66977 0
sata_nv 31812 0
pata_amd 14129 2
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.0-19-generic (buildd@allspice) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-1ubuntu1) ) #29-Ubuntu SMP Wed Apr 17 18:16:28 UTC 2013 (Ubuntu 3.8.0-19.29-generic 3.8.8)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=30450310-0d43-4b30-9c30-bdb5467e5366 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9fbffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9fc0000-0x00000000b9fcffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b9fd0000-0x00000000b9ffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: ASUSTek Computer Inc. K8N/'K8N', BIOS 1011.005 02/16/2006
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ e0000000 old size 32 MB
[ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
[ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE 0)
[ 0.000000] e820: last_pfn = 0xb9fc0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFE0000000 write-back
[ 0.000000] 2 base 00A0000000 mask FFF0000000 write-back
[ 0.000000] 3 base 00B0000000 mask FFF8000000 write-back
[ 0.000000] 4 base 00B8000000 mask FFFE000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xb9fbffff]
[ 0.000000] [mem 0x00000000-0xb9dfffff] page 2M
[ 0.000000] [mem 0xb9e00000-0xb9fbffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0xb9fbffff @ [mem 0x1fffb000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x3611c000-0x37085fff]
[ 0.000000] ACPI: RSDP 00000000000f9ed0 00021 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000b9fc0100 0003C (v01 A M I OEMXSDT 02000616 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000b9fc0290 000F4 (v03 A M I OEMFACP 02000616 MSFT 00000097)
[ 0.000000] ACPI BIOS Bug: Warning: 32/64X length mismatch in FADT/Gpe1Block: 0/32 (20121018/tbfadt-567)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Gpe1Block has zero address or length: 0x00000000000044A0/0x0 (20121018/tbfadt-598)
[ 0.000000] ACPI: DSDT 00000000b9fc0400 0441D (v01 A0128 A0128003 00000003 INTL 02002026)
[ 0.000000] ACPI: FACS 00000000b9fd0000 00040
[ 0.000000] ACPI: APIC 00000000b9fc0390 00068 (v01 A M I OEMAPIC 02000616 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000b9fd0040 00041 (v01 A M I OEMBIOS 02000616 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000b9fbffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xb9fbffff]
[ 0.000000] NODE_DATA [mem 0xb9fbb000-0xb9fbffff]
[ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800b6600000-ffff8800b95fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xb9fbffff]
[ 0.000000] On node 0 totalpages: 761679
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11839 pages used for memmap
[ 0.000000] DMA32 zone: 745857 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] e820: [mem 0xba000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800b9c00000 s85056 r8192 d21440 u2097152
[ 0.000000] pcpu-alloc: s85056 r8192 d21440 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 749770
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-19-generic root=UUID=30450310-0d43-4b30-9c30-bdb5467e5366 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] AGP bridge at 00:00:00
[ 0.000000] Aperture from AGP @ e0000000 old size 32 MB
[ 0.000000] Aperture size 4096 MB (APSIZE 0) is not right, using settings from NB
[ 0.000000] Aperture from AGP @ e0000000 size 32 MB (APSIZE 0)
[ 0.000000] Node 0: aperture @ e0000000 size 256 MB
[ 0.000000] Memory: 2965836k/3047168k available (7006k kernel code, 452k absent, 80880k reserved, 6238k data, 992k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16640 nr_irqs:256 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 12582912 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2411.633 MHz processor
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4823.26 BogoMIPS (lpj=9646532)
[ 0.004019] pid_max: default: 32768 minimum: 301
[ 0.004077] Security Framework initialized
[ 0.004126] AppArmor: AppArmor initialized
[ 0.004129] Yama: becoming mindful.
[ 0.004764] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014966] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.019025] Mount-cache hash table entries: 256
[ 0.019515] Initializing cgroup subsys cpuacct
[ 0.019523] Initializing cgroup subsys memory
[ 0.019552] Initializing cgroup subsys devices
[ 0.019556] Initializing cgroup subsys freezer
[ 0.019561] Initializing cgroup subsys blkio
[ 0.019565] Initializing cgroup subsys perf_event
[ 0.019571] Initializing cgroup subsys hugetlb
[ 0.019628] tseg: 0000000000
[ 0.019663] mce: CPU supports 5 MCE banks
[ 0.019691] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.019691] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.019691] tlb_flushall_shift: 4
[ 0.027728] Freeing SMP alternatives: 24k freed
[ 0.030011] ACPI: Core revision 20121018
[ 0.032495] ftrace: allocating 26689 entries in 105 pages
[ 0.044763] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.086202] smpboot: CPU0: AMD Athlon(tm) 64 Processor 3400+ (fam: 0f, model: 0c, stepping: 00)
[ 0.088000] Performance Events: AMD PMU driver.
[ 0.088000] ... version: 0
[ 0.088000] ... bit width: 48
[ 0.088000] ... generic registers: 4
[ 0.088000] ... value mask: 0000ffffffffffff
[ 0.088000] ... max period: 00007fffffffffff
[ 0.088000] ... fixed-purpose events: 0
[ 0.088000] ... event mask: 000000000000000f
[ 0.088000] Brought up 1 CPUs
[ 0.088000] smpboot: Total of 1 processors activated (4823.26 BogoMIPS)
[ 0.088000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.088000] devtmpfs: initialized
[ 0.088905] EVM: security.selinux
[ 0.088910] EVM: security.SMACK64
[ 0.088913] EVM: security.capability
[ 0.088984] PM: Registering ACPI NVS region [mem 0xb9fd0000-0xb9ffffff] (196608 bytes)
[ 0.090503] regulator-dummy: no parameters
[ 0.090608] NET: Registered protocol family 16
[ 0.090785] node 0 link 0: io port [1000, ffffff]
[ 0.090789] TOM: 00000000ba000000 aka 2976M
[ 0.090796] node 0 link 0: mmio [a0000, bffff]
[ 0.090800] node 0 link 0: mmio [ba000000, fe0bffff]
[ 0.090804] bus: [bus 00-ff] on node 0 link 0
[ 0.090806] bus: 00 [io 0x0000-0xffff]
[ 0.090807] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.090809] bus: 00 [mem 0xba000000-0xfcffffffff]
[ 0.090875] ACPI: bus type pci registered
[ 0.090955] PCI: Using configuration type 1 for base access
[ 0.092312] bio: create slab <bio-0> at 0
[ 0.092479] ACPI: Added _OSI(Module Device)
[ 0.092484] ACPI: Added _OSI(Processor Device)
[ 0.092489] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.092493] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.093160] ACPI: EC: Look up EC in DSDT
[ 0.094003] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.094202] ACPI: Actual Package length (170) is larger than NumElements field (5), truncated
[ 0.094208]
[ 0.095576] ACPI: Interpreter enabled
[ 0.095586] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.095608] ACPI: Using IOAPIC for interrupt routing
[ 0.098710] ACPI: Power Resource [ISAV] (on)
[ 0.100608] ACPI: No dock devices found.
[ 0.100621] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.100689] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.100696] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.100869] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.100872] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.100875] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.100877] pci_root PNP0A03:00: host bridge window [mem 0xba000000-0xff7bffff] (ignored)
[ 0.100881] PCI: root bus 00: hardware-probed resources
[ 0.100890] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[ 0.100937] PCI host bridge to bus 0000:00
[ 0.100943] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.100949] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.100956] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.100962] pci_bus 0000:00: root bus resource [mem 0xba000000-0xfcffffffff]
[ 0.100983] pci 0000:00:00.0: [10de:00e1] type 00 class 0x060000
[ 0.100993] pci 0000:00:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.101065] pci 0000:00:01.0: [10de:00e0] type 00 class 0x060100
[ 0.101099] pci 0000:00:01.1: [10de:00e4] type 00 class 0x0c0500
[ 0.101106] pci 0000:00:01.1: reg 10: [io 0x5080-0x509f]
[ 0.101117] pci 0000:00:01.1: reg 20: [io 0x5000-0x503f]
[ 0.101121] pci 0000:00:01.1: reg 24: [io 0x5040-0x507f]
[ 0.101135] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.101156] pci 0000:00:02.0: [10de:00e7] type 00 class 0x0c0310
[ 0.101163] pci 0000:00:02.0: reg 10: [mem 0xfebfd000-0xfebfdfff]
[ 0.101186] pci 0000:00:02.0: supports D1 D2
[ 0.101189] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101204] pci 0000:00:02.1: [10de:00e7] type 00 class 0x0c0310
[ 0.101211] pci 0000:00:02.1: reg 10: [mem 0xfebfe000-0xfebfefff]
[ 0.101235] pci 0000:00:02.1: supports D1 D2
[ 0.101237] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101253] pci 0000:00:02.2: [10de:00e8] type 00 class 0x0c0320
[ 0.101261] pci 0000:00:02.2: reg 10: [mem 0xfebffc00-0xfebffcff]
[ 0.101290] pci 0000:00:02.2: supports D1 D2
[ 0.101292] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101313] pci 0000:00:05.0: [10de:00df] type 00 class 0x068000
[ 0.101320] pci 0000:00:05.0: reg 10: [mem 0xfebfc000-0xfebfcfff]
[ 0.101324] pci 0000:00:05.0: reg 14: [io 0xec00-0xec07]
[ 0.101346] pci 0000:00:05.0: supports D1 D2
[ 0.101348] pci 0000:00:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.101363] pci 0000:00:06.0: [10de:00ea] type 00 class 0x040100
[ 0.101370] pci 0000:00:06.0: reg 10: [io 0xe800-0xe8ff]
[ 0.101374] pci 0000:00:06.0: reg 14: [io 0xe400-0xe47f]
[ 0.101379] pci 0000:00:06.0: reg 18: [mem 0xfebfb000-0xfebfbfff]
[ 0.101398] pci 0000:00:06.0: supports D1 D2
[ 0.101413] pci 0000:00:08.0: [10de:00e5] type 00 class 0x01018a
[ 0.101428] pci 0000:00:08.0: reg 20: [io 0xffa0-0xffaf]
[ 0.101460] pci 0000:00:0a.0: [10de:00e3] type 00 class 0x010185
[ 0.101467] pci 0000:00:0a.0: reg 10: [io 0x09f0-0x09f7]
[ 0.101471] pci 0000:00:0a.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.101476] pci 0000:00:0a.0: reg 18: [io 0x0970-0x0977]
[ 0.101480] pci 0000:00:0a.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.101485] pci 0000:00:0a.0: reg 20: [io 0xc800-0xc80f]
[ 0.101489] pci 0000:00:0a.0: reg 24: [io 0xc400-0xc47f]
[ 0.101514] pci 0000:00:0b.0: [10de:00e2] type 01 class 0x060400
[ 0.101546] pci 0000:00:0e.0: [10de:00ed] type 01 class 0x060400
[ 0.101574] pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
[ 0.101596] pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
[ 0.101617] pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
[ 0.101637] pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
[ 0.101678] pci 0000:01:00.0: [10de:00f2] type 00 class 0x030000
[ 0.101695] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.101705] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff pref]
[ 0.101715] pci 0000:01:00.0: reg 18: [mem 0xfc000000-0xfcffffff]
[ 0.101746] pci 0000:01:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref]
[ 0.101806] pci 0000:00:0b.0: PCI bridge to [bus 01]
[ 0.101815] pci 0000:00:0b.0: bridge window [mem 0xfa900000-0xfe9fffff]
[ 0.101819] pci 0000:00:0b.0: bridge window [mem 0xba800000-0xda7fffff pref]
[ 0.101847] pci 0000:02:07.0: [1814:0601] type 00 class 0x028000
[ 0.101858] pci 0000:02:07.0: reg 10: [mem 0xfeaf0000-0xfeafffff]
[ 0.101922] pci 0000:00:0e.0: PCI bridge to [bus 02]
[ 0.101928] pci 0000:00:0e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.101983] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.102097] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.102105] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.103001] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.103074] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
[ 0.103142] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.103208] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.103275] ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *11
[ 0.103351] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *3
[ 0.103425] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *9
[ 0.103487] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *10
[ 0.103549] ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *7
[ 0.103612] ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *10
[ 0.103674] ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
[ 0.103738] ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
[ 0.103801] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0
[ 0.103873] ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *0, disabled.
[ 0.103954] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
[ 0.104187] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.104193] vgaarb: loaded
[ 0.104195] vgaarb: bridge control possible 0000:01:00.0
[ 0.104542] SCSI subsystem initialized
[ 0.104549] ACPI: bus type scsi registered
[ 0.104690] libata version 3.00 loaded.
[ 0.104724] ACPI: bus type usb registered
[ 0.104761] usbcore: registered new interface driver usbfs
[ 0.104776] usbcore: registered new interface driver hub
[ 0.104818] usbcore: registered new device driver usb
[ 0.104970] PCI: Using ACPI for IRQ routing
[ 0.104977] PCI: pci_cache_line_size set to 64 bytes
[ 0.104994] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xefffffff pref] conflicts with GART [mem 0xe0000000-0xefffffff]
[ 0.105055] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.105058] e820: reserve RAM buffer [mem 0xb9fc0000-0xbbffffff]
[ 0.105239] NetLabel: Initializing
[ 0.105244] NetLabel: domain hash size = 128
[ 0.105248] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.105270] NetLabel: unlabeled traffic allowed by default
[ 0.105385] Switching to clocksource refined-jiffies
[ 0.118521] AppArmor: AppArmor Filesystem Enabled
[ 0.118634] pnp: PnP ACPI init
[ 0.118671] ACPI: bus type pnp registered
[ 0.118775] pnp 00:00: [dma 4]
[ 0.118814] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.118878] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.118906] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.118943] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.119334] pnp 00:04: [dma 2]
[ 0.119392] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.119769] pnp 00:05: Plug and Play ACPI device, IDs PNPb006 (active)
[ 0.120032] system 00:06: [io 0x0190-0x0193] has been reserved
[ 0.120038] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.120043] system 00:06: [io 0x4000-0x40ff window] has been reserved
[ 0.120048] system 00:06: [io 0x4400-0x44ff window] has been reserved
[ 0.120052] system 00:06: [io 0x4800-0x48ff window] has been reserved
[ 0.120058] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.120149] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.120155] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.120160] system 00:07: [mem 0xff780000-0xff7bffff] has been reserved
[ 0.120165] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.120317] system 00:08: [io 0x0480-0x0487] has been reserved
[ 0.120323] system 00:08: [io 0x0d00-0x0d07] has been reserved
[ 0.120328] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.120575] pnp 00:09: Plug and Play ACPI device, IDs PNPb02f (active)
[ 0.120849] pnp 00:0a: [dma 0 disabled]
[ 0.120902] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.121062] pnp 00:0b: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
[ 0.121070] pnp 00:0b: disabling [mem 0x000c0000-0x000dffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
[ 0.121077] pnp 00:0b: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
[ 0.121084] pnp 00:0b: disabling [mem 0x00100000-0xb9ffffff] because it overlaps 0000:00:00.0 BAR 0 [mem 0x00000000-0x0fffffff pref]
[ 0.121127] system 00:0b: [mem 0xff7c0000-0xffffffff] has been reserved
[ 0.121133] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.121350] pnp: PnP ACPI: found 12 devices
[ 0.121354] ACPI: ACPI bus type pnp unregistered
[ 0.127692] Switching to clocksource acpi_pm
[ 0.127938] pci 0000:00:0b.0: PCI bridge to [bus 01]
[ 0.127947] pci 0000:00:0b.0: bridge window [mem 0xfa900000-0xfe9fffff]
[ 0.127953] pci 0000:00:0b.0: bridge window [mem 0xba800000-0xda7fffff pref]
[ 0.127961] pci 0000:00:0e.0: PCI bridge to [bus 02]
[ 0.127966] pci 0000:00:0e.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.127966] pci 0000:00:0e.0: setting latency timer to 64
[ 0.127966] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.127966] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.127966] pci_bus 0000:00: resource 6 [mem 0xba000000-0xfcffffffff]
[ 0.127966] pci_bus 0000:01: resource 1 [mem 0xfa900000-0xfe9fffff]
[ 0.127966] pci_bus 0000:01: resource 2 [mem 0xba800000-0xda7fffff pref]
[ 0.127966] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.127966] NET: Registered protocol family 2
[ 0.127966] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.127966] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.127966] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.127966] TCP: reno registered
[ 0.127966] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.127966] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.127966] NET: Registered protocol family 1
[ 0.127966] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[ 0.208127] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21
[ 0.280115] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
[ 0.280179] pci 0000:01:00.0: Boot video device
[ 0.280186] PCI: CLS 32 bytes, default 64
[ 0.280296] Trying to unpack rootfs image as initramfs...
[ 0.663953] Freeing initrd memory: 15784k freed
[ 0.696518] agpgart-amd64 0000:00:00.0: AGP bridge [10de/00e1]
[ 0.696544] agpgart-amd64 0000:00:00.0: aperture size 4096 MB is not right, using settings from NB
[ 0.696560] agpgart-amd64 0000:00:00.0: setting up Nforce3 AGP
[ 0.709297] agpgart-amd64 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 0.709647] Initialise module verification
[ 0.709713] audit: initializing netlink socket (disabled)
[ 0.709735] type=2000 audit(1371184899.707:1): initialized
[ 0.740741] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.743065] VFS: Disk quotas dquot_6.5.2
[ 0.743160] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.744078] fuse init (API version 7.20)
[ 0.744182] msgmni has been set to 5823
[ 0.744703] Key type asymmetric registered
[ 0.744711] Asymmetric key parser 'x509' registered
[ 0.744765] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.744812] io scheduler noop registered
[ 0.744818] io scheduler deadline registered (default)
[ 0.744828] io scheduler cfq registered
[ 0.745041] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.745064] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.745269] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.745285] ACPI: Power Button [PWRB]
[ 0.745348] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.745356] ACPI: Power Button [PWRF]
[ 0.749218] GHES: HEST is not enabled!
[ 0.749365] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.769730] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.771229] Linux agpgart interface v0.103
[ 0.773029] brd: module loaded
[ 0.773937] loop: module loaded
[ 0.774566] libphy: Fixed MDIO Bus: probed
[ 0.774660] tun: Universal TUN/TAP device driver, 1.6
[ 0.774663] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.774715] PPP generic driver version 2.4.2
[ 0.774783] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.774790] ehci-pci: EHCI PCI platform driver
[ 0.774889] ehci-pci 0000:00:02.2: setting latency timer to 64
[ 0.774893] ehci-pci 0000:00:02.2: EHCI Host Controller
[ 0.774907] ehci-pci 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 0.774928] ehci-pci 0000:00:02.2: debug port 1
[ 0.775010] ehci-pci 0000:00:02.2: cache line size of 32 is not supported
[ 0.775047] ehci-pci 0000:00:02.2: irq 20, io mem 0xfebffc00
[ 0.784046] ehci-pci 0000:00:02.2: USB 2.0 started, EHCI 1.00
[ 0.784108] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.784115] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.784123] usb usb1: Product: EHCI Host Controller
[ 0.784128] usb usb1: Manufacturer: Linux 3.8.0-19-generic ehci_hcd
[ 0.784134] usb usb1: SerialNumber: 0000:00:02.2
[ 0.784286] hub 1-0:1.0: USB hub found
[ 0.784297] hub 1-0:1.0: 8 ports detected
[ 0.784500] ehci-platform: EHCI generic platform driver
[ 0.784516] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.784554] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.784557] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.784568] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.784605] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfebfd000
[ 0.842035] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.842042] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.842049] usb usb2: Product: OHCI Host Controller
[ 0.842054] usb usb2: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[ 0.842060] usb usb2: SerialNumber: 0000:00:02.0
[ 0.842163] hub 2-0:1.0: USB hub found
[ 0.842172] hub 2-0:1.0: 4 ports detected
[ 0.842296] ohci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.842299] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 0.842314] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[ 0.842347] ohci_hcd 0000:00:02.1: irq 21, io mem 0xfebfe000
[ 0.898019] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.898027] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.898034] usb usb3: Product: OHCI Host Controller
[ 0.898039] usb usb3: Manufacturer: Linux 3.8.0-19-generic ohci_hcd
[ 0.898045] usb usb3: SerialNumber: 0000:00:02.1
[ 0.898166] hub 3-0:1.0: USB hub found
[ 0.898175] hub 3-0:1.0: 4 ports detected
[ 0.898304] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.898413] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.900898] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.900908] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.901035] mousedev: PS/2 mouse device common for all mice
[ 0.901176] rtc_cmos 00:01: RTC can wake from S4
[ 0.901329] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.901359] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.901503] device-mapper: uevent: version 1.0.3
[ 0.901574] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[ 0.901597] cpuidle: using governor ladder
[ 0.901601] cpuidle: using governor menu
[ 0.901607] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.901612] EFI Variables Facility v0.08 2004-May-17
[ 0.901932] ashmem: initialized
[ 0.902101] TCP: cubic registered
[ 0.902247] NET: Registered protocol family 10
[ 0.902547] NET: Registered protocol family 17
[ 0.902571] Key type dns_resolver registered
[ 0.902793] Loading module verification certificates
[ 0.903977] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: d490763cc418e29de79f40a5aa7d97747ec8882c'
[ 0.904080] registered taskstats version 1
[ 0.908182] Key type trusted registered
[ 0.911613] Key type encrypted registered
[ 0.915428] rtc_cmos 00:01: setting system clock to 2013-06-14 04:41:40 UTC (1371184900)
[ 0.915591] powernow-k8: fid 0x10 (2400 MHz), vid 0x2
[ 0.915595] powernow-k8: fid 0xe (2200 MHz), vid 0x6
[ 0.915598] powernow-k8: fid 0xc (2000 MHz), vid 0xa
[ 0.915601] powernow-k8: fid 0xa (1800 MHz), vid 0xe
[ 0.915604] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 0.915890] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ (1 cpu cores) (version 2.20.00)
[ 0.915918] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.915921] EDD information not available.
[ 0.917852] Freeing unused kernel memory: 992k freed
[ 0.919513] Write protecting the kernel read-only data: 12288k
[ 0.923508] Freeing unused kernel memory: 1176k freed
[ 0.929667] Freeing unused kernel memory: 1080k freed
[ 0.960757] udevd[88]: starting version 175
[ 1.153415] pata_amd 0000:00:08.0: version 0.4.1
[ 1.153519] pata_amd 0000:00:08.0: setting latency timer to 64
[ 1.156161] scsi0 : pata_amd
[ 1.159330] scsi1 : pata_amd
[ 1.159690] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.159697] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.161975] ACPI: PCI Interrupt Link [LTID] BIOS reported IRQ 0, using IRQ 22
[ 1.161989] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
[ 1.162062] pata_acpi 0000:00:0a.0: setting latency timer to 64
[ 1.164119] scsi2 : pata_acpi
[ 1.167077] scsi3 : pata_acpi
[ 1.167443] ata3: PATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xc800 irq 22
[ 1.167449] ata4: PATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xc808 irq 22
[ 1.170936] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.171194] ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21
[ 1.171210] forcedeth 0000:00:05.0: setting latency timer to 64
[ 1.198421] Disabling lock debugging due to kernel taint
[ 1.248804] FDC 0 is a post-1991 82077
[ 1.334754] ata1.00: ATA-4: Maxtor 90845D4, GAS54112, max UDMA/33
[ 1.334776] ata1.00: 16514064 sectors, multi 16: LBA
[ 1.334955] ata1.01: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
[ 1.334960] ata1.01: 160086528 sectors, multi 16: LBA
[ 1.334972] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c700c6) ACPI=0x701f (60:15:0x1f)
[ 1.334978] ata1: nv_mode_filter: 0x7f39f&0x7f39f->0x7f39f, BIOS=0x7f000 (0xc0c700c6) ACPI=0x7f01f (60:15:0x1f)
[ 1.344042] usb 3-1: new low-speed USB device number 2 using ohci_hcd
[ 1.348367] ata1.00: configured for UDMA/33
[ 1.364332] ata1.01: configured for UDMA/133
[ 1.364551] scsi 0:0:0:0: Direct-Access ATA Maxtor 90845D4 GAS5 PQ: 0 ANSI: 5
[ 1.365911] sd 0:0:0:0: [sda] 16514064 512-byte logical blocks: (8.45 GB/7.87 GiB)
[ 1.365976] sd 0:0:0:0: [sda] Write Protect is off
[ 1.365983] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.366004] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.366428] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.406265] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5
[ 1.407660] sd 0:0:1:0: [sdb] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[ 1.407725] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.407732] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.407753] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.407853] sda: sda1 sda2
[ 1.408266] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 1.417288] sdb: sdb1
[ 1.417469] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.417748] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 1.557048] usb 3-1: New USB device found, idVendor=046d, idProduct=c31c
[ 1.557069] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.557076] usb 3-1: Product: USB Keyboard
[ 1.557081] usb 3-1: Manufacturer: Logitech
[ 1.582627] ata2.01: ATA-5: WDC WD400BB-60DGA0, 05.03E05, max UDMA/100
[ 1.582648] ata2.01: 78165360 sectors, multi 16: LBA
[ 1.582661] ata2: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc0c700c6) ACPI=0x3f01f (600:20:0x1c)
[ 1.597046] ata2.01: configured for UDMA/100
[ 1.597254] scsi 1:0:1:0: Direct-Access ATA WDC WD400BB-60DG 05.0 PQ: 0 ANSI: 5
[ 1.597556] sd 1:0:1:0: [sdc] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.597610] sd 1:0:1:0: [sdc] Write Protect is off
[ 1.597617] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.597638] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.598011] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 1.618528] usbcore: registered new interface driver usbhid
[ 1.618545] usbhid: USB HID core driver
[ 1.628367] sdc: sdc1
[ 1.628749] sd 1:0:1:0: [sdc] Attached SCSI disk
[ 1.631704] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.1/usb3/3-1/3-1:1.0/input/input2
[ 1.632232] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:02.1-1/input0
[ 1.637627] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:02.1/usb3/3-1/3-1:1.1/input/input3
[ 1.637956] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:02.1-1/input1
[ 1.692607] forcedeth 0000:00:05.0: ifname eth0, PHY OUI 0x90c3 @ 1, addr 00:e0:18:99:88:77
[ 1.692629] forcedeth 0000:00:05.0: csum timirq lnktim desc-v2
[ 1.708035] tsc: Refined TSC clocksource calibration: 2411.736 MHz
[ 1.708065] Switching to clocksource tsc
[ 3.667847] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 18.690231] Adding 194556k swap on /dev/sda1. Priority:-1 extents:1 across:194556k
[ 18.920827] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.978679] udevd[332]: starting version 175
[ 19.297772] ACPI Warning: 0x0000000000005000-0x000000000000503f SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMRG 1 (20121018/utaddress-251)
[ 19.297787] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 19.297871] i2c i2c-0: nForce2 SMBus adapter at 0x5040
[ 19.301921] lp: driver loaded but no devices found
[ 19.384241] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.430811] ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20
[ 19.430867] snd_intel8x0 0000:00:06.0: setting latency timer to 64
[ 19.432380] MCE: In-kernel MCE decoding enabled.
[ 19.444706] EDAC MC: Ver: 3.0.0
[ 19.467067] AMD64 EDAC driver v3.4.0
[ 19.530562] type=1400 audit(1371184919.111:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=371 comm="apparmor_parser"
[ 19.531100] type=1400 audit(1371184919.111:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=371 comm="apparmor_parser"
[ 19.531398] type=1400 audit(1371184919.111:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=371 comm="apparmor_parser"
[ 19.685565] gameport gameport0: NS558 PnP Gameport is pnp00:09/gameport0, io 0x200, speed 904kHz
[ 19.743086] [drm] Initialized drm 1.1.0 20060810
[ 19.764174] intel8x0_measure_ac97_clock: measured 52432 usecs (2576 samples)
[ 19.764182] intel8x0: clocking to 46895
[ 19.764949] EDAC amd64: DRAM ECC enabled.
[ 19.764959] EDAC amd64: K8 revE or earlier detected (node 0).
[ 19.765007] EDAC amd64: CS0: Double data rate SDRAM
[ 19.765009] EDAC amd64: CS1: Double data rate SDRAM
[ 19.765010] EDAC amd64: CS2: Double data rate SDRAM
[ 19.765012] EDAC amd64: CS3: Double data rate SDRAM
[ 19.765013] EDAC amd64: CS4: Double data rate SDRAM
[ 19.765014] EDAC amd64: CS5: Double data rate SDRAM
[ 19.778782] EDAC MC0: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:18.2
[ 19.779852] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 19.830214] cfg80211: Calling CRDA to update world regulatory domain
[ 19.846835] wmi: Mapper loaded
[ 19.944868] microcode: AMD CPU family 0xf not supported
[ 20.014949] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 19
[ 20.017458] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x043100a4
[ 20.017466] nouveau [ DEVICE][0000:01:00.0] Chipset: NV43 (NV43)
[ 20.017469] nouveau [ DEVICE][0000:01:00.0] Family : NV40
[ 20.018049] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 20.137731] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 20.137734] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 20.137911] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 20.137915] nouveau [ VBIOS][0000:01:00.0] version 05.43.02.80.65
[ 20.148545] nouveau [ PFB][0000:01:00.0] RAM type: DDR1
[ 20.148553] nouveau [ PFB][0000:01:00.0] RAM size: 256 MiB
[ 20.148555] nouveau [ PFB][0000:01:00.0] ZCOMP: 378880 tags
[ 20.229752] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[ 20.229776] agpgart: kworker/0:2 tried to set rate=x12. Setting to AGP3 x8 mode.
[ 20.229784] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 20.229814] nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
[ 20.230109] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[ 20.243167] [TTM] Zone kernel: Available graphics memory: 1492446 kiB
[ 20.243174] [TTM] Initializing pool allocator
[ 20.243182] [TTM] Initializing DMA pool allocator
[ 20.243681] nouveau [ DRM] VRAM: 252 MiB
[ 20.243688] nouveau [ DRM] GART: 256 MiB
[ 20.243695] nouveau [ DRM] BIT BIOS found
[ 20.243699] nouveau [ DRM] Bios version 05.43.02.80
[ 20.243704] nouveau [ DRM] TMDS table version 1.1
[ 20.243706] nouveau [ DRM] DCB version 3.0
[ 20.243710] nouveau [ DRM] DCB outp 00: 01000300 00000028
[ 20.243713] nouveau [ DRM] DCB outp 01: 04001310 00000028
[ 20.243715] nouveau [ DRM] DCB outp 02: 04011322 00000000
[ 20.243718] nouveau [ DRM] DCB outp 03: 020223f1 0080c080
[ 20.243721] nouveau [ DRM] DCB conn 00: 0000
[ 20.243724] nouveau [ DRM] DCB conn 01: 1130
[ 20.243726] nouveau [ DRM] DCB conn 02: 0210
[ 20.243728] nouveau [ DRM] DCB conn 03: 0211
[ 20.243729] nouveau [ DRM] DCB conn 04: 0213
[ 20.251515] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 20.251524] [drm] No driver support for vblank timestamp query.
[ 20.251620] nouveau [ DRM] 0xD617: Parsing digital output script table
[ 20.304147] nouveau [ DRM] 1 available performance level(s)
[ 20.304158] nouveau [ DRM] 0: core 325MHz shader 325MHz memory 500MHz fanspeed 100%
[ 20.304162] nouveau [ DRM] c: core 299MHz shader 299MHz memory 501MHz fanspeed 100%
[ 20.312646] nouveau [ DRM] MM: using M2MF for buffer copies
[ 20.312670] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3)
[ 20.374729] forcedeth 0000:00:05.0 eth0: no link during initialization
[ 20.375156] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.377343] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 20.476540] nouveau [ DRM] allocated 1600x900 fb: 0x9000, bo ffff8800b2fb1000
[ 20.477264] fbcon: nouveaufb (fb0) is primary device
[ 20.490435] Console: switching to colour frame buffer device 200x56
[ 20.491675] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 20.491679] nouveau 0000:01:00.0: registered panic notifier
[ 20.491694] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
[ 21.799183] cfg80211: World regulatory domain updated:
[ 21.799191] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 21.799194] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.799196] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.799198] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.799200] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.799202] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.708335] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.348369] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 25.724616] init: failsafe main process (876) killed by TERM signal
[ 26.515051] type=1400 audit(1371184926.095:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=968 comm="apparmor_parser"
[ 26.515652] type=1400 audit(1371184926.095:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=968 comm="apparmor_parser"
[ 26.515962] type=1400 audit(1371184926.095:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=968 comm="apparmor_parser"
[ 26.533992] type=1400 audit(1371184926.115:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=971 comm="apparmor_parser"
eth0 Link encap:Ethernet HWaddr 00:e0:18:99:88:77
inet addr:192.168.0.99 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:32 errors:0 dropped:0 overruns:0 frame:0
TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2768 (2.7 KB) TX bytes:2768 (2.7 KB)
wlan0 Link encap:Ethernet HWaddr 00:1a:ef:1d:a6:63
inet addr:192.168.0.100 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Thanks,
Bookmarks