Results 1 to 2 of 2

Thread: TV stopped working after switch to digital? Perth, AF9015

  1. #1
    Join Date
    Mar 2009
    Beans
    24

    TV stopped working after switch to digital? Perth, AF9015

    Hello,

    I was using a Kworld tuner (AF9015), tvheadend and XBMC to watch TV.

    However, it appears after the switch to digital on 16th April, Live TV on XBMC no longer works. I was receiving digital channels before the switch.

    I think it's a problem on my end although I'm not sure what.

    Could anyone please help me out?

    This is the output of dmesg :

    Code:
    17.891731] dvb-usb: found a 'KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)' in cold state, will try to load a firmware
    [   17.964780] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
    [   18.037749] dvb-usb: found a 'KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)' in warm state.
    [   18.037829] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
    [   18.038474] DVB: registering new adapter (KWorld USB DVB-T TV Stick II (VS-DVB-T 395U))
    [   18.060961] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/rc/rc0/input8
    [   18.062411] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/rc/rc0
    [   18.062414] dvb-usb: schedule remote query interval to 500 msecs.
    [   18.062419] dvb-usb: KWorld USB DVB-T TV Stick II (VS-DVB-T 395U) successfully initialized and connected.
    [   18.071986] usbcore: registered new interface driver dvb_usb_af9015
    The firmware I'm using came from this website :

    http://palosaari.fi/linux/v4l-dvb/fi...f9015/5.1.0.0/

    tvheadend appears to be detecting something but I'm not sure what :

    dvbinputs.jpg

    tvheadendstatus.jpg

    And the multiplexes shown here :
    multiplexes.jpg

    match up to these :
    http://ozdigitaltv.com/transmitters/...rmel-Walliston

    but I can't map them to any dvb services.

    Thank you.
    Last edited by AshNova; May 30th, 2013 at 12:38 PM. Reason: more info

  2. #2
    Join Date
    Mar 2009
    Beans
    24

    Re: TV stopped working after switch to digital? Perth, AF9015

    bump

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •