error: no such device after install
I have made a serious blunder while trying to install Ubuntu 12.04. on my HP G5000 laptop.
I had a sata hard disk plugged into a USB docking station while I was downloading Ubuntu 12.04
to a disc. Somehow I got 12.04 on the new disk and now, when I start up the laptop, the following error message
error: no such device : C4d5732d - 3c18 - 4818 - 86e2 -bca076dd9929
and it won't boot up to Windows Vista or Ubuntu.
However, if I plug in the sata hard disk docking station, I get the GNU grub version 1.99-21ubuntu3.9 boot option screen
Ubuntu, with Linux 3.5.0-25 generic
Ubuntu, with linux 3.5.0-25 generic (recovery mode)
previous Linux versions
Memory test (memtest86+, )
Memory test (memtest86+, serial console 115200)
Windows Vista (loader) (on /dev/sda1)
Windows Vista (loader0 (on /dev/sda2)
I can choose either vista or ubuntu and they will load OK.
How do I rectify this please?
Thanks in anticipation!!
Re: error: no such device after install
There are some ways for you to boot into your system again, those mechanisms are in Ubuntu Documents>Grub2
You can reinstall your Grub 2 to use your bootloader or fix it if you want. It is better if you have live CD or live-usb to install. Both terminal and graphical tools are useful. For instance:
When using a LiveCD, due to GRUB 2 changes between Ubuntu releases, it is recommended that the user boots a LiveCD of the same release (11.10, 12.04, etc) as the release to be repaired. If the user has installed a different version of GRUB 2, use a LiveCD with the same GRUB 2 version. If necessary, use the fdisk command to help determine the partition on which Ubuntu is installed. The fdisk option "-l" is a lowercase "L". Look for one of the appropriate size or formatting. Running sudo blkid may provide more information to help locate the proper partition, especially if the partitions are labeled. The '
In the following commands:
- Use the partition number of the Ubuntu installation with mount command.
- Do not use the partition number with the grub-install command.
- X is the drive letter (a, b, c, etc.); Y is the partition number (1, 5, etc).
- --boot-directory is the folder in which the GRUB folder is located. This is normally /boot but should be changed if the grub folder is located elsewhere.
- On systems with a separate /boot partition, that partition should be mounted to /mnt/boot. For instance: sudo mount /dev/sda6 /mnt/boot
- grub-install will restore missing files in the grub folder but will not restore intentionally deleted or corrupted files. To accomplish these tasks GRUB 2 must be completely removed and reinstalled.
sudo mount /dev/sdXY /mnt # Example: sudo mount /dev/sda5 /mnt sudo grub-install --boot-directory=/mnt/boot /dev/sdX # Example: sudo grub-install --boot-directory=/mnt/boot /dev/sdaIf Ubuntu is installed on B-tree file system i.e. btrfs then /boot changes to /@/boot in above commands such that :
sudo grub-install --boot-directory=/mnt/@/boot /dev/sdX # Example: sudo grub-install --boot-directory=/mnt/@/boot /dev/sdaFor GRUB 2 version 1.98 and earlier (Ubuntu 10.04), the installation command is slightly different. Rather than designating the --boot-directory, the switch is --root-directory. In this case, the location changes to /mnt
sudo grub-install --root-directory=/mnt /dev/sdX