Hello,

I'm currently trying to set up a DHCP Server for 2 VLANs.
The setup:
1 DHCP Server with 1 NIC connected to a LevelOne GES-1652 Switch, which has 2 VLANs configured
VLAN50 (Port 1,2,4,6,8,10,12,14,16)
VLAN60 (Port 1, 3,5,7)

Port 1 is the "Uplink" where the DHCP-Server is connected.

/etc/network/interfaces:
Code:
#vlan config part:
auto vlan50
iface vlan50 inet static
address 192.168.50.1
subnet 255.255.255.0
vlan_raw_device eth1

auto vlan60
iface vlan60 inet static
address 192.168.60.1
subnet 255.255.255.0
vlan_raw_device eth1
dhcpd.conf
Code:
authoritative;
log-facility local7;



#########################Subnetconfig for seaking.lan#############

subnet 192.168.50.0 netmask 255.255.255.0 {
  range 192.168.50.20 192.168.50.150; 
  option domain-name-servers 192.168.50.1; 
  option domain-name "seaking.lan"; 
  option routers 192.168.50.1;
  option broadcast-address 192.168.50.255; 
  default-lease-time 3600; 
  max-lease-time 7200;

}

subnet 192.168.60.0 netmask 255.255.255.0 {
  range 192.168.60.2 192.168.60.150; 
  option domain-name-servers 192.168.60.1; 
  option domain-name "testing.seaking.lan"; 
  option routers 192.168.60.1;
  option broadcast-address 192.168.60.255; 
  default-lease-time 3600; 
  max-lease-time 7200;

}
vlan package is installed and the networking and isc-dhcp-server services starting without any problems but if I connect a device to port 6 (vlan50) on the switch the dhcp server does not get any dhcp request

Some ideas?