My network configuration looks like the attached image.
I am using a switch that connects to an ADSL modem running DHCP for the 192.168.2.0 network.
On the server pc that has two network interfaces, eth0 has statically assigned 192.168.2.3 IP
and eth1 192.168.1.1.
After using firestarter i was able to share internet connection and the pc with IP 192.168.1.100
is able to "see" every other pc on the network but any pc on 192.168.2.0 network cannot "see"
this one, except server pc that is physically connected on both subnets.
Any ideas on how to route traffic from 192.168.2.0 subnet to 192.168.1.0 subnet?
And if possible, without having to touch the ADSL modem-router.
and my routing table ( route -n )# The loopback network interface
iface lo inet loopback
# The primary network interface
iface eth0 inet static
iface eth2 inet static
Thanks!Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2
0.0.0.0 192.168.2.1 0.0.0.0 UG 100 0 0 eth0