Hello all,

I have a CommandIR III on a Mythbuntu 12.04 64 bit system using a RC6 remote. After upgrade to 12.04 I it stopped working... So I reinstall Mythbuntu 12.04 64 bit with no change, the RC6 remote is seen by the mini III but thats where it all stops.
I have downloaded your two conf files hardware.conf and lircd.conf from comandir.com to get lirc to working, and it starts okay now.

Still all that happens is when I press buttons on the remote is the CommandIR shows a blinking red led on the top of the mini III.

If I start irw it gives no output when the remote is pressed.

System info to look at.

bryan@bryan-System-Product-Name:~$ lsb_release -irc
Distributor ID: Ubuntu
Release: 12.04
Codename: precise

bryan@bryan-System-Product-Name:~$ lsusb
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 005 Device 003: ID 10c4:0003 Cygnal Integrated Products, Inc. CommandIR
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 006: ID 0461:4d0f Primax Electronics, Ltd
Bus 002 Device 005: ID 0461:4d8a Primax Electronics, Ltd

bryan@bryan-System-Product-Name:~$ sudo /etc/init.d/lirc restart
* Stopping remote control daemon(s): LIRC [ OK ]
* Loading LIRC modules [ OK ]
* Starting remote control daemon(s) : LIRC [ OK ]

Pressing keys on the remote.
bryan@bryan-System-Product-Name:~$ irw
Giving up

bryan@bryan-System-Product-Name:~$ grep lirc /var/log/syslog
Mar 11 16:34:04 bryan-System-Product-Name lircd-0.9.0[5443]: accepted new client on /var/run/lirc/lircd
Mar 11 16:34:13 bryan-System-Product-Name lircd-0.9.0[5443]: removed client
Mar 11 16:34:13 bryan-System-Product-Name lircd-0.9.0[5443]: LIRC_deinit but keeping warm

# /etc/lirc/hardware.conf
#Chosen Remote Control

#Chosen IR Transmitter
TRANSMITTER="Command IR : Motorola Cable box"
# TRANSMITTER_MODULES="lirc_dev lirc_cmdir"
#Disable kernel support.
#Typically, lirc will disable in-kernel support for ir devices in order to
#handle them internally. Set to false to prevent lirc from disabling this
#in-kernel support.

#Enable lircd

#Don't start lircmd even if there seems to be a good config file

#Try to load appropriate kernel modules

# Default configuration files for your hardware if any

#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn't have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to "false"


#This configuration has been automatically generated via
#the Ubuntu LIRC package maintainer scripts.
#It includes the default configuration for the remote and/or
#transmitter that you have selected during package installation.
#Feel free to add any custom remotes to the configuration
#via additional include directives or below the existing
#Ubuntu include directives from your selected remote and/or

include "/usr/share/lirc/extras/transmitters/directtv/general.conf"
# one space
include "/usr/share/lirc/remotes/hauppauge/lircd.conf.hauppauge"

# Configuration for the Command IR : Motorola Cable box transmitter:
include "/usr/share/lirc/extras/transmitters/motorola/dctxxxx.conf"

bryan@bryan-System-Product-Name:/dev$ ls
alarm loop5 rfkill tty18 tty51 ttyS26
ashmem loop6 rtc tty19 tty52 ttyS27
autofs loop7 rtc0 tty2 tty53 ttyS28
binder loop-control sda tty20 tty54 ttyS29
block mapper sda1 tty21 tty55 ttyS3
bsg mcelog sda2 tty22 tty56 ttyS30
btrfs-control mei sda5 tty23 tty57 ttyS31
bus mem sdb tty24 tty58 ttyS4
cdrom net sdb1 tty25 tty59 ttyS5
cdrw network_latency sdb2 tty26 tty6 ttyS6
char network_throughput sdc tty27 tty60 ttyS7
console null sdc1 tty28 tty61 ttyS8
core nvidia0 sdd tty29 tty62 ttyS9
cpu nvidiactl sdd1 tty3 tty63 uinput
cpu_dma_latency oldmem sg0 tty30 tty7 urandom
disk port sg1 tty31 tty8 vcs
dvd ppp sg2 tty32 tty9 vcs1
dvdrw psaux sg3 tty33 ttyprintk vcs2
ecryptfs ptmx sg4 tty34 ttyS0 vcs3
fb0 pts shm tty35 ttyS1 vcs4
fd ram0 snapshot tty36 ttyS10 vcs5
full ram1 snd tty37 ttyS11 vcs6
fuse ram10 sr0 tty38 ttyS12 vcsa
fw0 ram11 stderr tty39 ttyS13 vcsa1
hidraw0 ram12 stdin tty4 ttyS14 vcsa2
hidraw1 ram13 stdout tty40 ttyS15 vcsa3
hidraw2 ram14 tty tty41 ttyS16 vcsa4
hpet ram15 tty0 tty42 ttyS17 vcsa5
input ram2 tty1 tty43 ttyS18 vcsa6
kmsg ram3 tty10 tty44 ttyS19 vga_arbiter
lircd ram4 tty11 tty45 ttyS2 vhost-net
log ram5 tty12 tty46 ttyS20 zero
loop0 ram6 tty13 tty47 ttyS21
loop1 ram7 tty14 tty48 ttyS22
loop2 ram8 tty15 tty49 ttyS23
loop3 ram9 tty16 tty5 ttyS24
loop4 random tty17 tty50 ttyS25