Results 1 to 10 of 13

Thread: HP 2540p and lm_sensors/fancontrol

Threaded View

  1. #1
    Join Date
    Jan 2009
    Location
    Europe-Austria
    Beans
    1,047
    Distro
    Ubuntu 10.04 Lucid Lynx

    HP 2540p and lm_sensors/fancontrol

    Hi,
    i have one HP 2540p with i7 Processor and try to make fancontrol working because the fan i always on.

    sensors-detect gives me:

    Code:
    root@linux:~# sensors-detect
    # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200)
    # System: Hewlett-Packard HP EliteBook 2540p (laptop)
    # Board: Hewlett-Packard 7008
    
    This program will help you determine which kernel modules you need
    to load to use lm_sensors most effectively. It is generally safe
    and recommended to accept the default answers to all questions,
    unless you know what you're doing.
    
    Some south bridges, CPUs or memory controllers contain embedded sensors.
    Do you want to scan for them? This is totally safe. (YES/no): y
    Module cpuid loaded successfully.
    Silicon Integrated Systems SIS5595...                       No
    VIA VT82C686 Integrated Sensors...                          No
    VIA VT8231 Integrated Sensors...                            No
    AMD K8 thermal sensors...                                   No
    AMD Family 10h thermal sensors...                           No
    AMD Family 11h thermal sensors...                           No
    AMD Family 12h and 14h thermal sensors...                   No
    AMD Family 15h thermal sensors...                           No
    AMD Family 15h power sensors...                             No
    Intel digital thermal sensor...                             Success!
        (driver `coretemp')
    Intel AMB FB-DIMM thermal sensor...                         No
    VIA C7 thermal sensor...                                    No
    VIA Nano thermal sensor...                                  No
    
    Some Super I/O chips contain embedded sensors. We have to write to
    standard I/O ports to probe them. This is usually safe.
    Do you want to scan for Super I/O sensors? (YES/no): y
    Probing for Super-I/O at 0x2e/0x2f
    Trying family `National Semiconductor/ITE'...               No
    Trying family `SMSC'...                                     Yes
    Found `SMSC FDC37B72x Super IO'                             
        (no hardware monitoring capabilities)
    Probing for Super-I/O at 0x4e/0x4f
    Trying family `National Semiconductor/ITE'...               No
    Trying family `SMSC'...                                     No
    Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
    Trying family `ITE'...                                      No
    
    Some hardware monitoring chips are accessible through the ISA I/O ports.
    We have to write to arbitrary I/O ports to probe them. This is usually
    safe though. Yes, you do have ISA I/O ports even if you do not have any
    ISA slots! Do you want to scan the ISA I/O ports? (YES/no): y
    Probing for `National Semiconductor LM78' at 0x290...       No
    Probing for `National Semiconductor LM79' at 0x290...       No
    Probing for `Winbond W83781D' at 0x290...                   No
    Probing for `Winbond W83782D' at 0x290...                   No
    
    Lastly, we can probe the I2C/SMBus adapters for connected hardware
    monitoring devices. This is the most risky part, and while it works
    reasonably well on most systems, it has been reported to cause trouble
    on some systems.
    Do you want to probe the I2C/SMBus adapters now? (YES/no): y
    Sorry, no supported PCI bus adapters found.
    Module i2c-dev loaded successfully.
    
    Next adapter: i915 gmbus disabled (i2c-0)
    Do you want to scan it? (YES/no/selectively): y
    
    Next adapter: i915 gmbus ssc (i2c-1)
    Do you want to scan it? (YES/no/selectively): y
    
    Next adapter: i915 GPIOB (i2c-2)
    Do you want to scan it? (YES/no/selectively): y
    
    Next adapter: i915 gmbus vga (i2c-3)
    Do you want to scan it? (YES/no/selectively): y
    
    Next adapter: i915 GPIOA (i2c-4)
    Do you want to scan it? (YES/no/selectively): y
    
    Next adapter: i915 gmbus panel (i2c-5)
    Do you want to scan it? (YES/no/selectively): y
     
    Next adapter: i915 GPIOC (i2c-6)
    Do you want to scan it? (YES/no/selectively): y
    
    Next adapter: i915 gmbus dpc (i2c-7)
    Do you want to scan it? (YES/no/selectively): y
    
    Next adapter: i915 GPIOD (i2c-8)
    Do you want to scan it? (YES/no/selectively): y
    
    Next adapter: i915 gmbus dpb (i2c-9)
    Do you want to scan it? (YES/no/selectively): y
    
    Next adapter: i915 GPIOE (i2c-10)
    Do you want to scan it? (YES/no/selectively): y
    
    Next adapter: i915 gmbus reserved (i2c-11)
    Do you want to scan it? (YES/no/selectively): y
    Client found at address 0x18
    Probing for `Analog Devices ADM1021'...                     No
    Probing for `Analog Devices ADM1021A/ADM1023'...            No
    Probing for `Maxim MAX1617'...                              No
    Probing for `Maxim MAX1617A'...                             No
    Probing for `Maxim MAX1668'...                              No
    Probing for `Maxim MAX1805'...                              No
    Probing for `Maxim MAX1989'...                              No
    Probing for `Maxim MAX6655/MAX6656'...                      No
    Probing for `TI THMC10'...                                  No
    Probing for `National Semiconductor LM84'...                No
    Probing for `Genesys Logic GL523SM'...                      No
    Probing for `Onsemi MC1066'...                              No
    Probing for `Maxim MAX1618'...                              No
    Probing for `Maxim MAX1619'...                              No
    Probing for `National Semiconductor LM82/LM83'...           No
    Probing for `Maxim MAX6654'...                              No
    Probing for `Maxim MAX6690'...                              No
    Probing for `Maxim MAX6680/MAX6681'...                      No
    Probing for `Maxim MAX6695/MAX6696'...                      No
    Probing for `Texas Instruments AMC6821'...                  No
    Probing for `National Semiconductor LM95245'...             No
    Probing for `National Semiconductor LM64'...                No
    Probing for `SMSC EMC1047'...                               No
    Probing for `SMSC EMC1402'...                               No
    Probing for `SMSC EMC1403'...                               No
    Probing for `SMSC EMC1404'...                               No
    Probing for `ST STTS424'...                                 No
    Probing for `ST STTS424E'...                                No
    Probing for `NXP SE97/SE97B'...                             No
    Probing for `NXP SE98'...                                   No
    Probing for `Analog Devices ADT7408'...                     No
    Probing for `IDT TS3000/TSE2002'...                         No
    Probing for `Maxim MAX6604'...                              No
    Probing for `Microchip MCP98242'...                         No
    Probing for `Microchip MCP98243'...                         No
    Probing for `Microchip MCP9843'...                          No
    Probing for `ON CAT6095/CAT34TS02'...                       No
    Client found at address 0x50
    Probing for `Analog Devices ADM1033'...                     No
    Probing for `Analog Devices ADM1034'...                     No
    Probing for `SPD EEPROM'...                                 No
    Probing for `EDID EEPROM'...                                No
    Client found at address 0x51
    Probing for `Analog Devices ADM1033'...                     No
    Probing for `Analog Devices ADM1034'...                     No
    Probing for `SPD EEPROM'...                                 No
    Client found at address 0x52
    Probing for `Analog Devices ADM1033'...                     No
    Probing for `Analog Devices ADM1034'...                     No
    Probing for `SPD EEPROM'...                                 No
    Client found at address 0x53
    Probing for `Analog Devices ADM1033'...                     No
    Probing for `Analog Devices ADM1034'...                     No
    Probing for `SPD EEPROM'...                                 No
    Client found at address 0x58
    Probing for `Analog Devices ADT7462'...                     No
    Probing for `Andigilog aSC7512'...                          No
    Client found at address 0x5c
    Probing for `Analog Devices ADT7462'...                     No
    Probing for `SMSC EMC1072'...                               No
    Probing for `SMSC EMC1073'...                               No
    Probing for `SMSC EMC1074'...                               No
    Client found at address 0x73
    Probing for `FSC Poseidon I'...                             No
    Probing for `FSC Poseidon II'...                            No
    Probing for `FSC Scylla'...                                 No
    Probing for `FSC Hermes'...                                 No
    Probing for `FSC Heimdal'...                                No
    Probing for `FSC Heracles'...                               No
    Probing for `FSC Hades'...                                  No
    Probing for `FSC Syleus'...                                 No
    
    Next adapter: i915 gmbus dpd (i2c-12)
    Do you want to scan it? (YES/no/selectively): y
    
    Next adapter: i915 GPIOF (i2c-13)
    Do you want to scan it? (YES/no/selectively): y
    
    Next adapter: DPDDC-A (i2c-14)
    Do you want to scan it? (YES/no/selectively): y
    Client found at address 0x50
    Probing for `Analog Devices ADM1033'...                     No
    Probing for `Analog Devices ADM1034'...                     No
    Probing for `SPD EEPROM'...                                 No
    Probing for `EDID EEPROM'...                                Yes
        (confidence 8, not a hardware monitoring chip)
    
    Next adapter: DPDDC-B (i2c-15)
    Do you want to scan it? (YES/no/selectively): y
    
    Next adapter: DPDDC-D (i2c-16)
    Do you want to scan it? (YES/no/selectively): y
    
    Now follows a summary of the probes I have just done.
    Just press ENTER to continue:  
    
    Driver `coretemp':
      * Chip `Intel digital thermal sensor' (confidence: 9)
    
    To load everything that is needed, add this to /etc/modules:
    #----cut here----
    # Chip drivers
    coretemp
    #----cut here----
    If you have some drivers built into your kernel, the list above will
    contain too many modules. Skip the appropriate ones!
    
    Do you want to add these lines automatically to /etc/modules? (yes/NO)y
    Successful!
    
    Monitoring programs won't work until the needed modules are
    loaded. You may want to run 'service module-init-tools start'
    to load them.
    
    Unloading i2c-dev... OK
    Unloading cpuid... OK
    sudo pwmconfig:
    Code:
    root@linux:~# sudo pwmconfig
    # pwmconfig revision 5857 (2010-08-22)
    This program will search your sensors for pulse width modulation (pwm)
    controls, and test each one to see if it controls a fan on
    your motherboard. Note that many motherboards do not have pwm
    circuitry installed, even if your sensor chip supports pwm.
    
    We will attempt to briefly stop each fan using the pwm controls.
    The program will attempt to restore each fan to full speed
    after testing. However, it is ** very important ** that you
    physically verify that the fans have been to full speed
    after the program has completed.
    
    /usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed
    So, i know that is crucially to make lm-sensors working to make fancontrol working. But i found no help... So i am thankful for any help
    Last edited by vickoxy; March 1st, 2013 at 08:08 PM.
    MacBook Pro7,1, Ubuntu 11.04 64bit

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •