Results 1 to 8 of 8

Thread: very slow booting

  1. #1
    Join Date
    Nov 2004
    Beans
    234

    very slow booting

    Hi.


    for quite some time i've been having very slow boot on my ubuntu 11.10. Sometimes it takes more than 3 minutes. Have no idea what's causing this.
    Here's my

    dmesg

    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 3.0.0-16-generic (buildd@palmer) (gcc version 4.6.1 (Ubuntu/
    Linaro 4.6.1-9ubuntu3) ) #28-Ubuntu SMP Fri Jan 27 17:50:54 UTC 2012 (Ubuntu 3.0.0-16.28-
    generic 3.0.17)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
    [    0.000000]  BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
    [    0.000000]  BIOS-e820: 000000007ffae000 - 000000007ffe0000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    [    0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 3.0.0-16-generic (buildd@palmer) (gcc version 4.6.1 (Ubuntu/
    Linaro 4.6.1-9ubuntu3) ) #28-Ubuntu SMP Fri Jan 27 17:50:54 UTC 2012 (Ubuntu 3.0.0-16.28-
    generic 3.0.17)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
    [    0.000000]  BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
    [    0.000000]  BIOS-e820: 000000007ffae000 - 000000007ffe0000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    [    0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 3.0.0-16-generic (buildd@palmer) (gcc version 4.6.1 (Ubuntu/
    Linaro 4.6.1-9ubuntu3) ) #28-Ubuntu SMP Fri Jan 27 17:50:54 UTC 2012 (Ubuntu 3.0.0-16.28-
    generic 3.0.17)
    [    0.000000] KERNEL supported cpus:
    [    0.000000]   Intel GenuineIntel
    [    0.000000]   AMD AuthenticAMD
    [    0.000000]   NSC Geode by NSC
    [    0.000000]   Cyrix CyrixInstead
    [    0.000000]   Centaur CentaurHauls
    [    0.000000]   Transmeta GenuineTMx86
    [    0.000000]   Transmeta TransmetaCPU
    [    0.000000]   UMC UMC UMC UMC
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable)
    [    0.000000]  BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data)
    [    0.000000]  BIOS-e820: 000000007ffae000 - 000000007ffe0000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    [    0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
    [    0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
    [    0.000000] DMI 2.4 present.
    [    0.000000] DMI: System manufacturer System Product Name/P5GC-MX/1333, BIOS 0413    03/13/2009
    [    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [    0.000000] last_pfn = 0x7ffa0 max_arch_pfn = 0x100000
    [    0.000000] MTRR default type: uncachable
    [    0.000000] MTRR fixed ranges enabled:
    [    0.000000]   00000-9FFFF write-back
    [    0.000000]   A0000-DFFFF uncachable
    [    0.000000]   E0000-EFFFF write-through
    [    0.000000]   F0000-FFFFF write-protect
    [    0.000000] MTRR variable ranges enabled:
    [    0.000000]   0 base 000000000 mask F80000000 write-back
    [    0.000000]   1 disabled
    [    0.000000]   2 disabled
    [    0.000000]   3 disabled
    [    0.000000]   4 disabled
    [    0.000000]   5 disabled
    [    0.000000]   6 disabled
    [    0.000000]   7 disabled
    [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [    0.000000] found SMP MP-table at [c00ff780] ff780
    [    0.000000] initial memory mapped : 0 - 01c00000
    [    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [    0.000000]  0000000000 - 0000400000 page 4k
    [    0.000000]  0000400000 - 0037400000 page 2M
    [    0.000000]  0037400000 - 00377fe000 page 4k
    [    0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
    [    0.000000] RAMDISK: 365ec000 - 372ee000
    [    0.000000] ACPI: RSDP 000fb030 00014 (v00 ACPIAM)
    [    0.000000] ACPI: RSDT 7ffa0000 00038 (v01 A_M_I_ OEMRSDT  03000913 MSFT 00000097)
    [    0.000000] ACPI: FACP 7ffa0200 00084 (v02 A_M_I_ OEMFACP  03000913 MSFT 00000097)
    [    0.000000] ACPI: DSDT 7ffa05c0 06909 (v01  A0798 A0798000 00000000 INTL 20051117)
    [    0.000000] ACPI: FACS 7ffae000 00040
    [    0.000000] ACPI: APIC 7ffa0390 0006C (v01 A_M_I_ OEMAPIC  03000913 MSFT 00000097)
    [    0.000000] ACPI: MCFG 7ffa0400 0003C (v01 A_M_I_ OEMMCFG  03000913 MSFT 00000097)
    [    0.000000] ACPI: OEMB 7ffae040 00080 (v01 A_M_I_ AMI_OEM  03000913 MSFT 00000097)
    [    0.000000] ACPI: HPET 7ffa6ed0 00038 (v01 A_M_I_ OEMHPET  03000913 MSFT 00000097)
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] 1159MB HIGHMEM available.
    [    0.000000] 887MB LOWMEM available.
    [    0.000000]   mapped low ram: 0 - 377fe000
    [    0.000000]   low ram: 0 - 377fe000
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA      0x00000010 -> 0x00001000
    [    0.000000]   Normal   0x00001000 -> 0x000377fe
    [    0.000000]   HighMem  0x000377fe -> 0x0007ffa0
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[2] active PFN ranges
    [    0.000000]     0: 0x00000010 -> 0x0000009f
    [    0.000000]     0: 0x00000100 -> 0x0007ffa0
    [    0.000000] On node 0 totalpages: 524079
    [    0.000000] free_area_init_node: node 0, pgdat c17b5480, node_mem_map f55ec200
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 3951 pages, LIFO batch:0
    [    0.000000]   Normal zone: 1744 pages used for memmap
    [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 2320 pages used for memmap
    [    0.000000]   HighMem zone: 294546 pages, LIFO batch:31
    [    0.000000] Using APIC driver default
    [    0.000000] ACPI: PM-Timer IO Port: 0x808
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    [    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [    0.000000] nr_irqs_gsi: 40
    [    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    [    0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    [    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
    [    0.000000] Booting paravirtualized kernel on bare hardware
    [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [    0.000000] PERCPU: Embedded 12 pages/cpu @f5000000 s26240 r0 d22912 u1048576
    [    0.000000] pcpu-alloc: s26240 r0 d22912 u1048576 alloc=1*4194304
    [    0.000000] pcpu-alloc: [0] 0 1 2 3 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 519983
    [    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0-16-generic root=UUID=d5b66bd9-920a-4459-9a78-dbd6287bbf67 ro quiet splash vt.handoff=7
    [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [    0.000000] Initializing CPU#0
    [    0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    [    0.000000] allocated 8386816 bytes of page_cgroup
    [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [    0.000000] Initializing HighMem for node 0 (000377fe:0007ffa0)
    [    0.000000] Memory: 2047824k/2096768k available (5338k kernel code, 48492k reserved, 2597k data, 696k init, 1187464k highmem)
    [    0.000000] virtual kernel memory layout:
    [    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
    [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
    [    0.000000]       .init : 0xc17c1000 - 0xc186f000   ( 696 kB)
    [    0.000000]       .data : 0xc1536944 - 0xc17c0100   (2597 kB)
    [    0.000000]       .text : 0xc1000000 - 0xc1536944   (5338 kB)
    [    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
    [    0.000000] NR_IRQS:2304 nr_irqs:712 16
    [    0.000000] CPU 0 irqstacks, hard=f440a000 soft=f440c000
    [    0.000000] vt handoff: transparent VT on vt#7
    [    0.000000] Console: colour dummy device 80x25
    [    0.000000] console [tty0] enabled
    [    0.000000] hpet clockevent registered
    [    0.000000] Fast TSC calibration using PIT
    [    0.000000] Detected 2999.969 MHz processor.
    [    0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.93 BogoMIPS (lpj=11999876)
    [    0.004007] pid_max: default: 32768 minimum: 301
    [    0.004026] Security Framework initialized
    [    0.004040] AppArmor: AppArmor initialized
    [    0.004041] Yama: becoming mindful.
    [    0.004089] Mount-cache hash table entries: 512
    [    0.004209] Initializing cgroup subsys cpuacct
    [    0.004214] Initializing cgroup subsys memory
    [    0.004219] Initializing cgroup subsys devices
    [    0.004221] Initializing cgroup subsys freezer
    [    0.004223] Initializing cgroup subsys net_cls
    [    0.004225] Initializing cgroup subsys blkio
    [    0.004230] Initializing cgroup subsys perf_event
    [    0.004257] CPU: Physical Processor ID: 0
    [    0.004258] CPU: Processor Core ID: 0
    [    0.004261] mce: CPU supports 6 MCE banks
    [    0.004269] CPU0: Thermal monitoring enabled (TM2)
    [    0.004272] using mwait in idle threads.
    [    0.008062] ACPI: Core revision 20110413
    [    0.012010] ftrace: allocating 24891 entries in 49 pages
    [    0.016050] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.016408] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [    0.058060] CPU0: Intel Pentium(R) Dual-Core  CPU      E5700  @ 3.00GHz stepping 0a
    [    0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [    0.060003] ... version:                2
    [    0.060003] ... bit width:              40
    [    0.060003] ... generic registers:      2
    [    0.060003] ... value mask:             000000ffffffffff
    [    0.060003] ... max period:             000000007fffffff
    [    0.060003] ... fixed-purpose events:   3
    [    0.060003] ... event mask:             0000000700000003
    [    0.060003] CPU 1 irqstacks, hard=f44ac000 soft=f44ae000
    [    0.060003] Booting Node   0, Processors  #1
    [    0.060003] smpboot cpu 1: start_ip = 9b000
    [    0.008000] Initializing CPU#1
    [    0.148021] Brought up 2 CPUs
    [    0.148024] Total of 2 processors activated (11999.73 BogoMIPS).
    [    0.148868] devtmpfs: initialized
    [    0.148868] PM: Registering ACPI NVS region at 7ffae000 (204800 bytes)
    [    0.149488] print_constraints: dummy: 
    [    0.149510] Time: 15:08:29  Date: 02/21/12
    [    0.149541] NET: Registered protocol family 16
    [    0.149563] Trying to unpack rootfs image as initramfs...
    [    0.149638] EISA bus registered
    [    0.149645] ACPI: bus type pci registered
    [    0.149694] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [    0.149696] PCI: not using MMCONFIG
    [    0.149985] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4
    [    0.149986] PCI: Using configuration type 1 for base access
    [    0.164144] bio: create slab <bio-0> at 0
    [    0.165127] ACPI: EC: Look up EC in DSDT
    [    0.166226] ACPI: Executed 1 blocks of module-level executable AML code
    [    0.168201] ACPI: SSDT 7ffae0c0 00298 (v01    AMI   CPU1PM 00000001 INTL 20060113)
    [    0.168430] ACPI: Dynamic OEM Table Load:
    [    0.168433] ACPI: SSDT   (null) 00298 (v01    AMI   CPU1PM 00000001 INTL 20060113)
    [    0.168567] ACPI: SSDT 7ffae360 00143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
    [    0.168791] ACPI: Dynamic OEM Table Load:
    [    0.168794] ACPI: SSDT   (null) 00143 (v01    AMI   CPU2PM 00000001 INTL 20060113)
    [    0.168988] ACPI: Interpreter enabled
    [    0.168994] ACPI: (supports S0 S1 S3 S4 S5)
    [    0.169013] ACPI: Using IOAPIC for interrupt routing
    [    0.169037] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
    [    0.169965] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
    [    0.169967] PCI: Using MMCONFIG for extended config space
    [    0.174249] ACPI: No dock devices found.
    [    0.174252] HEST: Table not found.
    [    0.174256] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [    0.174299] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [    0.174383] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
    [    0.174385] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
    [    0.174387] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [    0.174389] pci_root PNP0A08:00: host bridge window [mem 0x80010000-0xffffffff]
    [    0.174402] pci 0000:00:00.0: [8086:2770] type 0 class 0x000600
    [    0.174439] pci 0000:00:01.0: [8086:2771] type 1 class 0x000604
    [    0.174468] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [    0.174472] pci 0000:00:01.0: PME# disabled
    [    0.174514] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
    [    0.174528] pci 0000:00:1b.0: reg 10: [mem 0xe3df8000-0xe3dfbfff 64bit]
    [    0.174579] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [    0.174583] pci 0000:00:1b.0: PME# disabled
    [    0.174601] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
    [    0.174653] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [    0.174656] pci 0000:00:1c.0: PME# disabled
    [    0.174675] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
    [    0.174726] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [    0.174730] pci 0000:00:1c.1: PME# disabled
    [    0.174753] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
    [    0.174790] pci 0000:00:1d.0: reg 20: [io  0x8000-0x801f]
    [    0.174817] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
    [    0.174855] pci 0000:00:1d.1: reg 20: [io  0x8400-0x841f]
    [    0.174882] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
    [    0.174920] pci 0000:00:1d.2: reg 20: [io  0x8800-0x881f]
    [    0.174948] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
    [    0.174986] pci 0000:00:1d.3: reg 20: [io  0x9000-0x901f]
    [    0.175021] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
    [    0.175039] pci 0000:00:1d.7: reg 10: [mem 0xe3dffc00-0xe3dfffff]
    [    0.175104] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [    0.175108] pci 0000:00:1d.7: PME# disabled
    [    0.175124] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [    0.175176] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
    [    0.175256] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
    [    0.175287] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
    [    0.175298] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
    [    0.175307] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
    [    0.175316] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
    [    0.175324] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
    [    0.175333] pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
    [    0.175365] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
    [    0.175378] pci 0000:00:1f.2: reg 10: [io  0xa800-0xa807]
    [    0.175385] pci 0000:00:1f.2: reg 14: [io  0xa400-0xa403]
    [    0.175393] pci 0000:00:1f.2: reg 18: [io  0xa000-0xa007]
    [    0.175400] pci 0000:00:1f.2: reg 1c: [io  0x9800-0x9803]
    [    0.175408] pci 0000:00:1f.2: reg 20: [io  0x9400-0x940f]
    [    0.175436] pci 0000:00:1f.2: PME# supported from D3hot
    [    0.175439] pci 0000:00:1f.2: PME# disabled
    [    0.175451] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
    [    0.175500] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
    [    0.175565] pci 0000:04:00.0: [10de:1040] type 0 class 0x000300
    [    0.175574] pci 0000:04:00.0: reg 10: [mem 0xe4000000-0xe4ffffff]
    [    0.175585] pci 0000:04:00.0: reg 14: [mem 0xe8000000-0xefffffff 64bit pref]
    [    0.175595] pci 0000:04:00.0: reg 1c: [mem 0xe6000000-0xe7ffffff 64bit pref]
    [    0.175602] pci 0000:04:00.0: reg 24: [io  0xe800-0xe87f]
    [    0.175609] pci 0000:04:00.0: reg 30: [mem 0xe5f00000-0xe5f7ffff pref]
    [    0.175650] pci 0000:04:00.1: [10de:0e08] type 0 class 0x000403
    [    0.175659] pci 0000:04:00.1: reg 10: [mem 0xe5ffc000-0xe5ffffff]
    [    0.180030] pci 0000:00:01.0: PCI bridge to [bus 04-04]
    [    0.180034] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
    [    0.180037] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe5ffffff]
    [    0.180041] pci 0000:00:01.0:   bridge window [mem 0xe6000000-0xefffffff 64bit pref]
    [    0.180083] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
    [    0.180086] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
    [    0.180090] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [    0.180095] pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [    0.180148] pci 0000:02:00.0: [1969:2048] type 0 class 0x000200
    [    0.180170] pci 0000:02:00.0: reg 10: [mem 0xe3fc0000-0xe3ffffff 64bit]
    [    0.180222] pci 0000:02:00.0: reg 30: [mem 0xe3fa0000-0xe3fbffff pref]
    [    0.180256] pci 0000:02:00.0: PME# supported from D3hot D3cold
    [    0.180261] pci 0000:02:00.0: PME# disabled
    [    0.180279] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
    [    0.180289] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
    [    0.180292] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
    [    0.180296] pci 0000:00:1c.1:   bridge window [mem 0xe3f00000-0xe3ffffff]
    [    0.180301] pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [    0.180334] pci 0000:01:01.0: [168c:0023] type 0 class 0x000280
    [    0.180353] pci 0000:01:01.0: reg 10: [mem 0xe3ef0000-0xe3efffff]
    [    0.180468] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode)
    [    0.180472] pci 0000:00:1e.0:   bridge window [io  0xb000-0xbfff]
    [    0.180475] pci 0000:00:1e.0:   bridge window [mem 0xe3e00000-0xe3efffff]
    [    0.180480] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [    0.180482] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
    [    0.180484] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
    [    0.180486] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [    0.180488] pci 0000:00:1e.0:   bridge window [mem 0x80010000-0xffffffff] (subtractive decode)
    [    0.180504] pci_bus 0000:00: on NUMA node 0
    [    0.180510] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.180633] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [    0.180664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
    [    0.180714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    [    0.180744] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
    [    0.180803]  pci0000:00: Requesting ACPI _OSC control (0x1d)
    [    0.180806]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [    0.180807] ACPI _OSC control for PCIe not granted, disabling ASPM
    [    0.183365] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [    0.183406] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [    0.183444] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [    0.183481] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [    0.183518] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
    [    0.183555] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [    0.183592] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    [    0.183631] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [    0.183728] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
    [    0.183731] vgaarb: loaded
    [    0.183732] vgaarb: bridge control possible 0000:04:00.0
    [    0.183921] SCSI subsystem initialized
    [    0.184011] libata version 3.00 loaded.
    [    0.184038] usbcore: registered new interface driver usbfs
    [    0.184048] usbcore: registered new interface driver hub
    [    0.184073] usbcore: registered new device driver usb
    [    0.184142] PCI: Using ACPI for IRQ routing
    [    0.184145] PCI: pci_cache_line_size set to 64 bytes
    [    0.184213] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
    [    0.184215] reserve RAM buffer: 000000007ffa0000 - 000000007fffffff 
    [    0.184302] NetLabel: Initializing
    [    0.184304] NetLabel:  domain hash size = 128
    [    0.184305] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.184314] NetLabel:  unlabeled traffic allowed by default
    [    0.184346] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [    0.184350] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [    0.184354] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [    0.192075] Switching to clocksource hpet
    [    0.195866] Switched to NOHz mode on CPU #0
    [    0.195940] Switched to NOHz mode on CPU #1
    [    0.198246] AppArmor: AppArmor Filesystem Enabled
    [    0.198281] pnp: PnP ACPI init
    [    0.198298] ACPI: bus type pnp registered
    [    0.198381] pnp 00:00: [bus 00-ff]
    [    0.198384] pnp 00:00: [io  0x0cf8-0x0cff]
    [    0.198385] pnp 00:00: [io  0x0000-0x0cf7 window]
    [    0.198387] pnp 00:00: [io  0x0d00-0xffff window]
    [    0.198389] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [    0.198391] pnp 00:00: [mem 0x80010000-0xffffffff window]
    [    0.198451] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [    0.198459] pnp 00:01: [mem 0xfed13000-0xfed19fff]
    [    0.198513] system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
    [    0.198515] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.198538] pnp 00:02: [dma 4]
    [    0.198540] pnp 00:02: [io  0x0000-0x000f]
    [    0.198542] pnp 00:02: [io  0x0081-0x0083]
    [    0.198543] pnp 00:02: [io  0x0087]
    [    0.198545] pnp 00:02: [io  0x0089-0x008b]
    [    0.198546] pnp 00:02: [io  0x008f]
    [    0.198548] pnp 00:02: [io  0x00c0-0x00df]
    [    0.198568] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [    0.198576] pnp 00:03: [io  0x0070-0x0071]
    [    0.198589] pnp 00:03: [irq 8]
    [    0.198612] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [    0.198619] pnp 00:04: [io  0x0061]
    [    0.198641] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [    0.198648] pnp 00:05: [io  0x00f0-0x00ff]
    [    0.198652] pnp 00:05: [irq 13]
    [    0.198673] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [    0.198915] pnp 00:06: [irq 6]
    [    0.198917] pnp 00:06: [dma 2]
    [    0.198919] pnp 00:06: [io  0x03f0-0x03f5]
    [    0.198921] pnp 00:06: [io  0x03f7]
    [    0.198965] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
    [    0.199255] pnp 00:07: [irq 7]
    [    0.199257] pnp 00:07: [dma 3]
    [    0.199259] pnp 00:07: [io  0x0378-0x037f]
    [    0.199260] pnp 00:07: [io  0x0778-0x077f]
    [    0.199374] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active)
    [    0.199398] pnp 00:08: [io  0x0000-0xffffffff disabled]
    [    0.199400] pnp 00:08: [io  0x0000-0xffffffff disabled]
    [    0.199401] pnp 00:08: [io  0x0290-0x0297]
    [    0.199438] system 00:08: [io  0x0290-0x0297] has been reserved
    [    0.199440] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.199524] pnp 00:09: [io  0x0010-0x001f]
    [    0.199526] pnp 00:09: [io  0x0022-0x003f]
    [    0.199528] pnp 00:09: [io  0x0044-0x005f]
    [    0.199529] pnp 00:09: [io  0x0062-0x0063]
    [    0.199531] pnp 00:09: [io  0x0065-0x006f]
    [    0.199532] pnp 00:09: [io  0x0072-0x007f]
    [    0.199534] pnp 00:09: [io  0x0080]
    [    0.199535] pnp 00:09: [io  0x0084-0x0086]
    [    0.199536] pnp 00:09: [io  0x0088]
    [    0.199538] pnp 00:09: [io  0x008c-0x008e]
    [    0.199539] pnp 00:09: [io  0x0090-0x009f]
    [    0.199541] pnp 00:09: [io  0x00a2-0x00bf]
    [    0.199542] pnp 00:09: [io  0x00e0-0x00ef]
    [    0.199544] pnp 00:09: [io  0x04d0-0x04d1]
    [    0.199546] pnp 00:09: [io  0x0800-0x087f]
    [    0.199547] pnp 00:09: [io  0x0000-0xffffffff disabled]
    [    0.199549] pnp 00:09: [io  0x0480-0x04bf]
    [    0.199550] pnp 00:09: [io  0x0900-0x091f]
    [    0.199552] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
    [    0.199554] pnp 00:09: [mem 0xfed20000-0xfed8ffff]
    [    0.199555] pnp 00:09: [mem 0xffb00000-0xffbfffff]
    [    0.199557] pnp 00:09: [mem 0xfff00000-0xffffffff]
    [    0.199610] system 00:09: [io  0x04d0-0x04d1] has been reserved
    [    0.199612] system 00:09: [io  0x0800-0x087f] has been reserved
    [    0.199614] system 00:09: [io  0x0480-0x04bf] has been reserved
    [    0.199616] system 00:09: [io  0x0900-0x091f] has been reserved
    [    0.199618] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [    0.199621] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
    [    0.199623] system 00:09: [mem 0xffb00000-0xffbfffff] has been reserved
    [    0.199625] system 00:09: [mem 0xfff00000-0xffffffff] could not be reserved
    [    0.199628] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.199703] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
    [    0.199727] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
    [    0.199758] pnp 00:0b: [io  0x0060]
    [    0.199760] pnp 00:0b: [io  0x0064]
    [    0.199764] pnp 00:0b: [irq 1]
    [    0.199795] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [    0.199842] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
    [    0.199844] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
    [    0.199883] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
    [    0.199885] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
    [    0.199888] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.200122] pnp 00:0d: [irq 4]
    [    0.200124] pnp 00:0d: [dma 0 disabled]
    [    0.200126] pnp 00:0d: [io  0x03f8-0x03ff]
    [    0.200178] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
    [    0.200217] pnp 00:0e: [mem 0xffb80000-0xffbfffff]
    [    0.200219] pnp 00:0e: [mem 0xfff80000-0xffffffff]
    [    0.200243] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
    [    0.200277] pnp 00:0f: [mem 0xffc00000-0xfff7ffff]
    [    0.200313] system 00:0f: [mem 0xffc00000-0xfff7ffff] has been reserved
    [    0.200316] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.200339] pnp 00:10: [mem 0xf0000000-0xf3ffffff]
    [    0.200378] system 00:10: [mem 0xf0000000-0xf3ffffff] has been reserved
    [    0.200380] system 00:10: Plug and Play ACPI device, IDs PNP0c02 (active)
    [    0.200496] pnp 00:11: [mem 0x00000000-0x0009ffff]
    [    0.200498] pnp 00:11: [mem 0x000c0000-0x000dffff]
    [    0.200499] pnp 00:11: [mem 0x000e0000-0x000fffff]
    [    0.200501] pnp 00:11: [mem 0x00100000-0x7fffffff]
    [    0.200503] pnp 00:11: [mem 0x00000000-0xffffffff disabled]
    [    0.200546] system 00:11: [mem 0x00000000-0x0009ffff] could not be reserved
    [    0.200548] system 00:11: [mem 0x000c0000-0x000dffff] could not be reserved
    [    0.200550] system 00:11: [mem 0x000e0000-0x000fffff] could not be reserved
    [    0.200553] system 00:11: [mem 0x00100000-0x7fffffff] could not be reserved
    [    0.200555] system 00:11: Plug and Play ACPI device, IDs PNP0c01 (active)
    [    0.200658] pnp: PnP ACPI: found 18 devices
    [    0.200659] ACPI: ACPI bus type pnp unregistered
    [    0.200662] PnPBIOS: Disabled by ACPI PNP
    [    0.236448] PCI: max bus depth: 1 pci_try_num: 2
    [    0.236487] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80100000-0x802fffff]
    [    0.236490] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80300000-0x804fffff 64bit pref]
    [    0.236493] pci 0000:00:01.0: PCI bridge to [bus 04-04]
    [    0.236495] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
    [    0.236499] pci 0000:00:01.0:   bridge window [mem 0xe4000000-0xe5ffffff]
    [    0.236502] pci 0000:00:01.0:   bridge window [mem 0xe6000000-0xefffffff 64bit pref]
    [    0.236505] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
    [    0.236508] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
    [    0.236512] pci 0000:00:1c.0:   bridge window [mem 0x80100000-0x802fffff]
    [    0.236516] pci 0000:00:1c.0:   bridge window [mem 0x80300000-0x804fffff 64bit pref]
    [    0.236521] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
    [    0.236523] pci 0000:00:1c.1:   bridge window [io  0xc000-0xcfff]
    [    0.236528] pci 0000:00:1c.1:   bridge window [mem 0xe3f00000-0xe3ffffff]
    [    0.236531] pci 0000:00:1c.1:   bridge window [mem pref disabled]
    [    0.236536] pci 0000:00:1e.0: PCI bridge to [bus 01-01]
    [    0.236539] pci 0000:00:1e.0:   bridge window [io  0xb000-0xbfff]
    [    0.236543] pci 0000:00:1e.0:   bridge window [mem 0xe3e00000-0xe3efffff]
    [    0.236546] pci 0000:00:1e.0:   bridge window [mem pref disabled]
    [    0.236572] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.236576] pci 0000:00:01.0: setting latency timer to 64
    [    0.236582] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [    0.236585] pci 0000:00:1c.0: setting latency timer to 64
    [    0.236593] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.236597] pci 0000:00:1c.1: setting latency timer to 64
    [    0.236603] pci 0000:00:1e.0: setting latency timer to 64
    [    0.236606] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
    [    0.236608] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
    [    0.236609] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.236611] pci_bus 0000:00: resource 7 [mem 0x80010000-0xffffffff]
    [    0.236613] pci_bus 0000:04: resource 0 [io  0xe000-0xefff]
    [    0.236615] pci_bus 0000:04: resource 1 [mem 0xe4000000-0xe5ffffff]
    [    0.236617] pci_bus 0000:04: resource 2 [mem 0xe6000000-0xefffffff 64bit pref]
    [    0.236619] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
    [    0.236621] pci_bus 0000:03: resource 1 [mem 0x80100000-0x802fffff]
    [    0.236623] pci_bus 0000:03: resource 2 [mem 0x80300000-0x804fffff 64bit pref]
    [    0.236625] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
    [    0.236627] pci_bus 0000:02: resource 1 [mem 0xe3f00000-0xe3ffffff]
    [    0.236629] pci_bus 0000:01: resource 0 [io  0xb000-0xbfff]
    [    0.236631] pci_bus 0000:01: resource 1 [mem 0xe3e00000-0xe3efffff]
    [    0.236632] pci_bus 0000:01: resource 4 [io  0x0000-0x0cf7]
    [    0.236634] pci_bus 0000:01: resource 5 [io  0x0d00-0xffff]
    [    0.236636] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
    [    0.236638] pci_bus 0000:01: resource 7 [mem 0x80010000-0xffffffff]
    [    0.236687] NET: Registered protocol family 2
    [    0.236755] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.236963] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.237482] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.237735] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.237737] TCP reno registered
    [    0.237740] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [    0.237754] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [    0.237854] NET: Registered protocol family 1
    [    0.237977] pci 0000:04:00.0: Boot video device
    [    0.237994] PCI: CLS 16 bytes, default 64
    [    0.238301] audit: initializing netlink socket (disabled)
    [    0.238311] type=2000 audit(1329836909.232:1): initialized
    [    0.257729] highmem bounce pool size: 64 pages
    [    0.257735] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    0.266778] VFS: Disk quotas dquot_6.5.2
    [    0.266841] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    0.267393] fuse init (API version 7.16)
    [    0.267468] msgmni has been set to 1680
    [    0.267736] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [    0.267757] io scheduler noop registered
    [    0.267758] io scheduler deadline registered
    [    0.267769] io scheduler cfq registered (default)
    [    0.267866] pcieport 0000:00:01.0: setting latency timer to 64
    [    0.267899] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [    0.267938] pcieport 0000:00:1c.0: setting latency timer to 64
    [    0.267971] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [    0.268039] pcieport 0000:00:1c.1: setting latency timer to 64
    [    0.268072] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [    0.268138] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [    0.268157] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [    0.268211] intel_idle: MWAIT substates: 0x22220
    [    0.268212] intel_idle: does not run on family 6 model 23
    [    0.268280] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
    [    0.268284] ACPI: Power Button [PWRB]
    [    0.268319] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [    0.268321] ACPI: Power Button [PWRF]
    [    0.268343] ACPI: acpi_idle registered with cpuidle
    [    0.269961] ERST: Table is not found!
    [    0.270025] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [    0.290412] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    0.290728] isapnp: Scanning for PnP cards...
    [    0.374835] Freeing initrd memory: 13320k freed
    [    0.643585] isapnp: No Plug & Play device found
    [    0.696637] 00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    0.696918] Linux agpgart interface v0.103
    [    0.698022] brd: module loaded
    [    0.698479] loop: module loaded
    [    0.698605] ata_piix 0000:00:1f.1: version 2.13
    [    0.698629] ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [    0.698664] ata_piix 0000:00:1f.1: setting latency timer to 64
    [    0.698925] scsi0 : ata_piix
    [    0.698996] scsi1 : ata_piix
    [    0.699967] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    [    0.699969] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    [    0.699996] ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
    [    0.700011] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [    0.700054] ata_piix 0000:00:1f.2: setting latency timer to 64
    [    0.700271] scsi2 : ata_piix
    [    0.698996] scsi1 : ata_piix
    [    0.699967] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    [    0.699969] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    [    0.699996] ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
    [    0.700011] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    [    0.700054] ata_piix 0000:00:1f.2: setting latency timer to 64
    [    0.700271] scsi2 : ata_piix
    [    0.700323] scsi3 : ata_piix
    [    0.701281] ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa400 bmdma 0x9400 irq 23
    [    0.701283] ata4: SATA max UDMA/133 cmd 0xa000 ctl 0x9800 bmdma 0x9408 irq 23
    [    0.701574] Fixed MDIO Bus: probed
    [    0.701596] PPP generic driver version 2.4.2
    [    0.701630] tun: Universal TUN/TAP device driver, 1.6
    [    0.701631] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    0.701693] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.701709] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    0.701719] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [    0.701722] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [    0.701755] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
    [    0.701773] ehci_hcd 0000:00:1d.7: using broken periodic workaround
    [    0.701782] ehci_hcd 0000:00:1d.7: debug port 1
    [    0.705657] ehci_hcd 0000:00:1d.7: cache line size of 16 is not supported
    [    0.705668] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe3dffc00
    [    0.720018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [    0.720219] hub 1-0:1.0: USB hub found
    [    0.720223] hub 1-0:1.0: 8 ports detected
    [    0.720283] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.720293] uhci_hcd: USB Universal Host Controller Interface driver
    [    0.720312] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
    [    0.720317] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [    0.720319] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [    0.720345] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [    0.720366] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00008000
    [    0.720457] hub 2-0:1.0: USB hub found
    [    0.720460] hub 2-0:1.0: 2 ports detected
    [    0.720509] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [    0.720514] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [    0.720517] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [    0.720541] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
    [    0.720571] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00008400
    [    0.720664] hub 3-0:1.0: USB hub found
    [    0.720667] hub 3-0:1.0: 2 ports detected
    [    0.720715] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [    0.720719] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [    0.720722] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [    0.720749] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
    [    0.720776] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008800
    [    0.720866] hub 4-0:1.0: USB hub found
    [    0.720869] hub 4-0:1.0: 2 ports detected
    [    0.720919] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [    0.720923] uhci_hcd 0000:00:1d.3: setting latency timer to 64
    [    0.720926] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [    0.720950] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
    [    0.720978] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00009000
    [    0.721066] hub 5-0:1.0: USB hub found
    [    0.721071] hub 5-0:1.0: 2 ports detected
    [    0.721168] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [    0.721170] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [    0.721762] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    0.721836] mousedev: PS/2 mouse device common for all mice
    [    0.721938] rtc_cmos 00:03: RTC can wake from S4
    [    0.722015] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [    0.722037] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
    [    0.722105] device-mapper: uevent: version 1.0.3
    [    0.722162] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
    [    0.722184] EISA: Probing bus 0 at eisa.0
    [    0.722186] EISA: Cannot allocate resource for mainboard
    [    0.722188] Cannot allocate resource for EISA slot 1
    [    0.722190] Cannot allocate resource for EISA slot 2
    [    0.722191] Cannot allocate resource for EISA slot 3
    [    0.722192] Cannot allocate resource for EISA slot 4
    [    0.722194] Cannot allocate resource for EISA slot 5
    [    0.722195] Cannot allocate resource for EISA slot 6
    [    0.722196] Cannot allocate resource for EISA slot 7
    [    0.722198] Cannot allocate resource for EISA slot 8
    [    0.722199] EISA: Detected 0 cards.
    [    0.722207] cpufreq-nforce2: No nForce2 chipset.
    [    0.722209] cpuidle: using governor ladder
    [    0.722211] cpuidle: using governor menu
    [    0.722212] EFI Variables Facility v0.08 2004-May-17
    [    0.722441] TCP cubic registered
    [    0.722550] NET: Registered protocol family 10
    [    0.723012] NET: Registered protocol family 17
    [    0.723024] Registering the dns_resolver key type
    [    0.723040] Using IPI No-Shortcut mode
    [    0.723096] PM: Hibernation image not present or could not be loaded.
    [    0.723107] registered taskstats version 1
    [    0.731642]   Magic number: 0:209:134
    [    0.731701] acpi device:09: hash matches
    [    0.731733] rtc_cmos 00:03: setting system clock to 2012-02-21 15:08:30 UTC (1329836910)
    [    0.732236] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    0.732237] EDD information not available.
    [    0.872397] ata1.00: ATAPI: _NEC DVD_RW ND-3520A, 1.04, max UDMA/33
    [    0.872402] ata1.01: ATAPI: TSSTcorpDVD-ROM TS-H352A, TS03, max UDMA/33
    [    0.872495] ata3.00: ATA-7: SAMSUNG SP1603C, VL100-50, max UDMA7
    [    0.872497] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [    0.888220] ata1.00: configured for UDMA/33
    [    0.896350] ata1.01: configured for UDMA/33
    [    0.898628] scsi 0:0:0:0: CD-ROM            _NEC     DVD_RW ND-3520A  1.04 PQ: 0 ANSI: 5
    [    0.900145] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    [    0.900150] cdrom: Uniform CD-ROM driver Revision: 3.20
    [    0.900326] sr 0:0:0:0: Attached scsi CD-ROM sr0
    [    0.900380] sr 0:0:0:0: Attached scsi generic sg0 type 5
    [    0.901378] scsi 0:0:1:0: CD-ROM            TSSTcorp DVD-ROM TS-H352A TS03 PQ: 0 ANSI: 5
    [    0.902260] sr1: scsi3-mmc drive: 1x/48x cd/rw xa/form2 cdda tray
    [    0.902413] sr 0:0:1:0: Attached scsi CD-ROM sr1
    [    0.902467] sr 0:0:1:0: Attached scsi generic sg1 type 5
    [    0.904259] ata3.00: configured for UDMA/133
    [    0.904393] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG SP1603C  VL10 PQ: 0 ANSI: 5
    [    0.904580] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    [    0.904607] sd 2:0:0:0: Attached scsi generic sg2 type 0
    [    0.904630] sd 2:0:0:0: [sda] Write Protect is off
    [    0.904632] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    0.904659] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    0.954206]  sda: sda1 sda2 sda3 < sda5 sda6 >
    [    0.954581] sd 2:0:0:0: [sda] Attached SCSI disk
    [    0.984367] ata4.00: ATA-6: ST380013AS, 3.18, max UDMA/133
    [    0.984372] ata4.00: 156301488 sectors, multi 16: LBA48 
    [    1.000357] ata4.00: configured for UDMA/133
    [    1.000489] scsi 3:0:0:0: Direct-Access     ATA      ST380013AS       3.18 PQ: 0 ANSI: 5
    [    1.000643] sd 3:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
    [    1.000659] sd 3:0:0:0: Attached scsi generic sg3 type 0
    [    1.000679] sd 3:0:0:0: [sdb] Write Protect is off
    [    1.000681] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [    1.000707] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.236020] Refined TSC clocksource calibration: 2999.963 MHz.
    [    1.236027] Switching to clocksource tsc
    [    1.272016] usb 3-1: new low speed USB device number 2 using uhci_hcd
    [    1.768014] usb 3-2: new low speed USB device number 3 using uhci_hcd
    [    2.299883]  sdb: sdb1 < sdb5 >
    [    2.300164] sd 3:0:0:0: [sdb] Attached SCSI disk
    [    2.300193] Freeing unused kernel memory: 696k freed
    [    2.300413] Write protecting the kernel text: 5340k
    [    2.300446] Write protecting the kernel read-only data: 2192k
    [    2.312269] udevd[89]: starting version 173
    [    2.386595] Atheros(R) L2 Ethernet Driver - version 2.2.3
    [    2.386598] Copyright (c) 2007 Atheros Corporation.
    [    2.386632] atl2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [    2.386641] atl2 0000:02:00.0: setting latency timer to 64
    [    2.394328] Floppy drive(s): fd0 is 1.44M
    [    2.411805] FDC 0 is a post-1991 82077
    [    2.442106] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2
    [    2.442184] generic-usb 0003:04D9:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0000:00:1d.1-1/input0
    [    2.531761] input:   USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input3
    [    2.531864] generic-usb 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0000:00:1d.1-1/input1
    [    2.545018] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
    [    2.545085] generic-usb 0003:046D:C03E.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2/input0
    [    2.545096] usbcore: registered new interface driver usbhid
    [    2.545098] usbhid: USB HID core driver
    [    2.657840] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [   22.860411] udevd[318]: starting version 173
    [   22.894810] lp: driver loaded but no devices found
    [   22.909771] intel_rng: FWH not detected
    [   22.938474] leds_ss4200: no LED devices found
    [   22.968887] cfg80211: Calling CRDA to update world regulatory domain
    [   22.981994] type=1400 audit(1329836932.745:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=426 comm="apparmor_parser"
    [   22.982313] type=1400 audit(1329836932.745:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=426 comm="apparmor_parser"
    [   22.982514] type=1400 audit(1329836932.745:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=426 comm="apparmor_parser"
    [   22.983843] Adding 2144672k swap on /dev/sda2.  Priority:-1 extents:1 across:2144672k 
    [   22.997464] nvidia: module license 'NVIDIA' taints kernel.
    [   22.997468] Disabling lock debugging due to kernel taint
    [   23.127386] parport_pc 00:07: reported by Plug and Play ACPI
    [   23.127489] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
    [   23.330425] lp0: using parport0 (interrupt-driven).
    [   23.334592] ath9k 0000:01:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
    [   23.840679] ppdev: user-space parallel port driver
    [   23.851621] ath: EEPROM regdomain: 0x30
    [   23.851623] ath: EEPROM indicates we should expect a direct regpair map
    [   23.851625] ath: Country alpha2 being used: AM
    [   23.851626] ath: Regpair used: 0x30
    [   23.851629] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
    [   23.851631] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851633] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
    [   23.851635] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851637] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
    [   23.851639] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851640] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
    [   23.851642] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851644] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
    [   23.851646] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851647] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
    [   23.851649] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851651] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
    [   23.851653] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851655] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
    [   23.851657] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851658] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
    [   23.851660] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851662] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   23.851664] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851666] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   23.851668] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851669] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
    [   23.851671] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
    [   23.851673] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
    [   23.887368] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   23.893039] cfg80211: World regulatory domain updated:
    [   23.893042] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   23.893044] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   23.893046] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   23.893048] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   23.893050] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   23.893052] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   23.893504] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width ch[   23.851660] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851662] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   23.851664] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851666] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   23.851668] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851669] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
    [   23.851671] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
    [   23.851673] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
    [   23.887368] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   23.893039] cfg80211: World regulatory domain updated:
    [   23.893042] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   23.893044] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   23.893046] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   23.893048] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   23.893050] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   23.893052] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   23.893504] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width ch[   23.851660] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851662] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   23.851664] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851666] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   23.851668] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851669] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
    [   23.851671] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
    [   23.851673] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
    [   23.887368] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   23.893039] cfg80211: World regulatory domain updated:
    [   23.893042] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   23.893044] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   23.893046] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   23.893048] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   23.893050] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   23.893052] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   23.893504] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width ch[   23.851660] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851662] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   23.851664] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851666] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   23.851668] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.851669] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
    [   23.851671] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
    [   23.851673] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
    [   23.887368] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   23.893039] cfg80211: World regulatory domain updated:
    [   23.893042] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   23.893044] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   23.893046] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   23.893048] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [   23.893050] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   23.893052] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [   23.893504] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
    [   23.893506] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
    [   23.893508] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
    [   23.893510] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
    [   23.893512] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
    [   23.893514] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
    [   23.893515] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
    [   23.893517] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
    [   23.893519] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
    [   23.893521] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
    [   23.893523] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
    [   23.893525] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
    [   23.893526] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
    [   23.893528] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
    [   23.893530] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
    [   23.893532] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
    [   23.893534] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
    [   23.893536] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
    [   23.893537] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   23.893539] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
    [   23.893541] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   23.893543] cfg80211: 2402000 KHz - 2472000 KHz @  KHz), (300 mBi, 2000 mBm)
    [   23.893545] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
    [   23.893547] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
    [   23.893548] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
    [   23.893550] cfg80211: 2457000 KHz - 2482000 KHz @  KHz), (300 mBi, 2000 mBm)
    [   23.893552] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
    [   23.893554] cfg80211: 2474000 KHz - 2494000 KHz @  KHz), (300 mBi, 2000 mBm)
    [   23.907721] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [   23.907771] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [   23.907793] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [   23.926696] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
    [   23.931094] nvidia 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [   23.931103] nvidia 0000:04:00.0: setting latency timer to 64
    [   23.931108] vgaarb: device changed decodes: PCI:0000:04:00.0,olddecodes=io+mem,decodes
    =none:owns=io+mem
    [   23.931253] NVRM: loading NVIDIA UNIX x86 Kernel Module  280.13  Wed Jul 27 16:55:43 PDT 2011
    [   23.942046] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    [   23.942743] Registered led device: ath9k-phy0
    [   23.942748] ieee80211 phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xf8cc0000, irq=21
    [   23.943105] cfg80211: Calling CRDA for country: AM
    [   23.964609] HDA Intel 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [   23.964614] hda_intel: Disabling MSI
    [   23.964645] HDA Intel 0000:04:00.1: setting latency timer to 64
    [   23.968601] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
    [   23.968605] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.968607] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
    [   23.968609] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.968610] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
    [   23.968612] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.968614] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
    [   23.968616] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.968618] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
    [   23.968620] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.968621] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
    [   23.968623] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.968625] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
    [   23.968627] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.968629] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
    [   23.968631] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.968632] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
    [   23.968634] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.968636] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
    [   23.968638] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.968640] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
    [   23.968642] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.968643] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
    [   23.968645] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.968647] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
    [   23.968649] cfg80211: 2402000 KHz - 2482000 KHz @  KHz), (N/A mBi, 2000 mBm)
    [   23.968651] cfg80211: Disabling freq 2484 MHz
    [   23.968654] cfg80211: Regulatory domain changed to country: AM
    [   23.968655] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [   23.968657] cfg80211:     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [   23.968659] cfg80211:     (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
    [   23.968661] cfg80211:     (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
    [   24.388016] HDMI status: Pin=4 Presence_Detect=0 ELD_Valid=0
    [   24.412016] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0
    [   24.428160] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:04:00.1/sound/card1/input5
    [   24.428265] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:04:00.1/sound/card1/input6
    [   24.436594] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
    [   24.752974] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [   24.804594] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
    [   27.056324] type=1400 audit(1329836936.821:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=979 comm="apparmor_parser"
    [   27.057746] type=1400 audit(1329836936.821:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=978 comm="apparmor_parser"
    [   27.058410] type=1400 audit(1329836936.821:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=979 comm="apparmor_parser
    place" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=979 comm="apparmor_parser"
    [   27.058608] type=1400 audit(1329836936.821:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=979 comm="apparmor_parser"
    [   27.074268] type=1400 audit(1329836936.837:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=985 comm="apparmor_parser"
    [   27.074980] type=1400 audit(1329836936.837:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=980 comm="apparmor_parser"
    [   27.079472] type=1400 audit(1329836936.841:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=980 comm="apparmor_parser"
    [   27.195777] atl2 0000:02:00.0: irq 44 for MSI/MSI-X
    [   27.195949] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   27.237457] init: failsafe main process (928) killed by TERM signal
    [   27.238668] init: apport pre-start process (1064) terminated with status 1
    [   27.249785] init: apport post-stop process (1089) terminated with status 1
    [   27.400592] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
    [   27.400712] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [   28.011049] Bluetooth: Core ver 2.16
    [   28.011103] NET: Registered protocol family 31
    [   28.011105] Bluetooth: HCI device and connection manager initialized
    [   28.011107] Bluetooth: HCI socket layer initialized
    [   28.011109] Bluetooth: L2CAP socket layer initialized
    [   28.011132] Bluetooth: SCO socket layer initialized
    [   28.014116] Bluetooth: RFCOMM TTY layer initialized
    [   28.014121] Bluetooth: RFCOMM socket layer initialized
    [   28.014122] Bluetooth: RFCOMM ver 1.11
    [   28.014335] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   28.014337] Bluetooth: BNEP filters: protocol multicast
    [   29.388612] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
    [   29.514427] EXT4-fs (sda1): re-mounted. Opts: commit=0
    [   29.592273] EXT4-fs (sda6): re-mounted. Opts: commit=0
    [   38.136009] eth0: no IPv6 routers present
    [   61.833417] vesafb: mode is 640x480x32, linelength=2560, pages=0
    [   61.833420] vesafb: scrolling: redraw
    [   61.833422] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [   61.834013] vesafb: framebuffer at 0xe7000000, mapped to 0xfa680000, using 1216k, total 1216k
    [   61.834176] Console: switching to colour frame buffer device 80x30
    [   61.834187] fb0: VESA VGA frame buffer device
    [   61.849862] init: plymouth-splash main process (1748) terminated with status 1
    [   61.859217] audit_printk_skb: 21 callbacks suppressed
    [   61.859220] type=1400 audit(1329836970.645:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1765 comm="apparmor_parser"
    [   61.859641] type=1400 audit(1329836970.645:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1765 comm="apparmor_parser"
    [   63.889175] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
    [   63.891566] EXT4-fs (sda1): re-mounted. Opts: commit=0
    [   63.893760] EXT4-fs (sda6): re-mounted. Opts: commit=0

  2. #2
    Join Date
    Jul 2011
    Beans
    39

    Re: very slow booting

    I'm experiencing pretty much exactly the same issue:

    http://ubuntuforums.org/showthread.p...ght=che47audio

    Please let me know if you get anywhere, I will do the same.

  3. #3
    Join Date
    Feb 2011
    Location
    Great White North
    Beans
    128
    Distro
    Kubuntu 11.10 Oneiric Ocelot

    Re: very slow booting

    You seem to have three items which take a while to initialize.

    The first is udevd which is a daemon that I believe you shouldn't tamper with.

    The second is your ethernet connection which can't find an ipv6 router.

    The third one is your graphics driver which is for intel boxes.

    I am wondering if you did any modifications to any of these which may have caused a slowdown
    VHDL and C FTW

    Designing a custom CPU based on MIPS

  4. #4
    Join Date
    Feb 2008
    Location
    Texas
    Beans
    23,330
    Distro
    Ubuntu 17.10 Artful Aardvark

    Re: very slow booting

    Hi, for the ipv6 issue you can click on your network settings, edit connections, wireless ipv6 and set it to ignore that should take care of that issue.
    Thanks

  5. #5
    Join Date
    Nov 2004
    Beans
    234

    Re: very slow booting

    Thank u for your replies.

    Already deactivated IPV6 but it remains the same.
    Udevd? can i turn it off? How? What will it do if i turn it off?

    About the graphic card, i made some changes in my hardware. I upgraded my cpu and graphic card. I'm not sure, but i think the problem existed before that upgrade.

  6. #6
    Join Date
    Nov 2004
    Beans
    234

    Re: very slow booting

    my computer takes about 4 minutes to boot.

  7. #7
    Join Date
    Sep 2008
    Location
    Canada
    Beans
    54
    Distro
    Ubuntu Development Release

    Re: very slow booting

    Mine, at least the 32 bit version of 12.10 hangs for a full minute at nf-conntrack, but only for 5 seconds on my 64 bit version of Quantal.

    Any ideas why this is happening?

  8. #8
    Join Date
    Dec 2010
    Beans
    2

    Re: very slow booting

    I ran across this on one of my Ububoxes awhile back. 4 or 5 mins. to boot. I think it was looking at the 250Gb external USB hard drive for something to boot from or was at least reading the file system on it.

    If I remember right, I even went into the bios and set the boot order for usb last but that didn't work.

    After that I tried to remember to unplug all the USB drive before rebooting.

    This was in your dmesg:
    [ 1.272016] usb 3-1: new low speed USB device number 2 using uhci_hcd
    [ 1.768014] usb 3-2: new low speed USB device number 3 using uhci_hcd
    [ 2.299883] sdb: sdb1 < sdb5 >

    Hope this is relevant.
    Last edited by rdsmith12; December 25th, 2012 at 05:44 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •