Canon LBP6000 printer in Ubuntu 12.04 LTS 32 not working

[sysone]

On Canon website downloaded their latest driver for Linux:
CAPT Printer Driver for Linux Version 2.50 --10/25/12 --43.28 MB
'Linux_CAPT_PrinterDriver_V250_us_EN.tar.gz' extracted -->

'Linux_CAPT_PrinterDriver_V250_us_EN' ---> '32-bit_Driver' folder -->'Debian' folder + 'RPM' folder;

Debian --> 'cndrvcups-capt_2.50-1_i386.deb' + '32-bit_Driver'.

And I opened both above with Ubuntu software Center. Synaptic lists both as installed.

But the printer does not respond at all when I try to print a file (says that it was sent to printer).
And a search for drivers says that no proprietary drivers are in use on this system.
Too late I see that Linux users have had problems with Canon printers.

I read that Radu Cotescu has a script for installing Canon LBP printers in Linux but that is for 64 bit machines and besides, LBP6000 is not listed :
http://radu.cotescu.com/how-to-insta...ers-in-ubuntu/

For earlier drivers Canon gives intructions for installing the printer :

 Ubuntu 12.04 Install

For a new install please see the html guide in the 2.4 driver download:

    Download 32/64 Bit Linux CAPT Printer Driver v2.40 English. 

Find the debian packages in the v2.40 drivers deb folder:

    cndrvcups-capt.deb

    cndrvcups-common.deb 

Install from the v2.40 driver as you would any other package with Ubuntu Software Center. Then follow the canon guide v2.40 carefuully making sure that you change this line accordingly:

sudo /usr/sbin/lpadmin -p LBP5000 -m CNCUPSLBP5000CAPTK.ppd -v ccp://localhost:59787 -E

The manual says ccp://localhost:59687 but Ubuntu by default is using 59787. This will give you a headache if you do not change it. (The file /etc/ccpd.conf defines UI_Port 59787 and PDATA_Port 59687. So, both these ports need to be open in the firewall setting.)

* Note: Ubuntu 12.04 has again blacklisted the usblp module which creates the /dev/usb/lp0 device link. To solve this problem do this

sudo nano /etc/modprobe.d/blacklist-cups-usblp.conf

Then comment the file to look like this, canons driver does not talk to the printer through cups:

# cups talks to the raw USB devices, so we need to blacklist usblp to avoid
# grabbing them
# blacklist usblp

* Note: The later sections of this article under 'Adding a printer' and 'Troubleshooting' suggest using 'ccp:/var/ccpd/fifo0'. That works, but you have to ensure /var/ccp/fifo0 exists with correct ownership/mode. Using 'ccp://localhost:59787' is simpler as it requires no extra steps involving fifo file.

But I am not sure that I can follow the instructions without help.
Any help appreciated.

[pdc]

have a read at post #2

http://ubuntuforums.org/showthread.php?t=2061614

.....see if it gets you printing.............

............seems like you have installed the printer drivers?

If you copy and paste the command below into a terminal, and copy and paste the results back here

sudo dpkg -l | grep Canon

.. I trust you installed the common driver and then the capt driver ..

[offgridguy]

Printers; I can share your frustration.

Good luck anyway, in my case it happens to be a brother printer.

[sysone]

.. I trust you installed the common driver and then the capt driver ..

1:~$ sudo dpkg -l | grep Canon
ii cndrvcups-capt 2.50-1 Canon CAPT Printer Driver for Linux
ii cndrvcups-common 2.50-1 Canon Printer Driver Common Modules Ver.2.50


Synaptic also confirms it.
But your link raised my hopes - even if it refers to a different printer.
Thanks for that

[pdc]

But your link raised my hopes - even if it refers to a different printer.

indeed .......in the thread I mentioned .........

the command to register the LBP6000 printer would be

sudo /usr/sbin/lpadmin -p LBP2900 -m CNCUPSLBP6018CAPTK.ppd -v ccp://localhost:59787 -E

......the ubuntu howto

https://help.ubuntu.com/community/Ca..._12.04_Install

say to use CNCUPSLBP6018CAPTK.ppd

[sysone]

indeed .......in the thread I mentioned .........
the command to register the LBP6000 printer would be

......the ubuntu howto

https://help.ubuntu.com/community/Ca..._12.04_Install

say to use CNCUPSLBP6018CAPTK.ppd

Hi pdc
Actually, the above command is for LBP2900.
the ppd for my machine is reportedly Canon LBP6000/6018 (CNCUPSLBP6018CAPTS.ppd)



So the command would be :

        
  /usr/sbin/lpadmin -p LBP6000 -m CNCUPSLBP6018CAPTK.ppd -v ccp://localhost:59687 –E

But it is not working - just keeps asking if I want to do a test page and is sending it to the printer which does nothing.


I'll delete the drivers and start all over .
Thanks

[sysone]

when I try :

:~$ sudo  /usr/sbin/lpadmin -p LBP6000 -m CNCUPSLBP6018CAPTK.ppd -v ccp://localhost:59787 –E

lpadmin: Unknown argument "–E".

same for

 :~$ sudo  /usr/sbin/lpadmin -p LBP6000 -m CNCUPSLBP6018CAPTK.ppd -v ccp://localhost:59687 –E 

lpadmin: Unknown argument "–E".

Well somebody said somewhere else that LPB6000 does not work in Linux -'Period' but I'll try some more.

[pdc]

.........I don't know Sooty .........not sure if you remember Harry Corbett?

I see you have an extra space before the /usr/sbin/lpadmin

sudo /usr/sbin/lpadmin -p LBP6000 -m CNCUPSLBP6018CAPTK.ppd -v ccp://localhost:59787 –E

whereas it might be better as

sudo /usr/sbin/lpadmin -p LBP6000 -m CNCUPSLBP6018CAPTK.ppd -v ccp://localhost:59687 –E

from issuing the command in a terminal

man lapadmin

I get in relation to -E

-E
Enables the destination and accepts jobs; this is the same as running the cupsaccept and cupsenable programs on the destination.

........so -E should be fine ............try again without the extra space before /usr ?

You were right about my proofreading error in my last post:

[sysone]

............try again without the extra space before /usr

I did better : cut/paste your link (just changed to LBP6018 and it was accepted with no protest!

Like before, I have 2 icons as printers : LBP6000/6018 (active) and LBP6000 inactive.

The one or the other says that they send a test page to printer but nothing happens.
I also tried" cupsenable" and "cupsdisable" and again nothing happens.
Also deleted the inactive printer and again nothing.

Somebody wrote that Precise cups need replacing but developers have not done this.

BTW, man lpadmin -->.... ' the -E option forces encryption when connecting to the server.' ....
which of course is of no importance at this stage.

Thanks again for your support

[pdc]

so the printer is still not working......is that correct?

from here

http://ubuntuforums.org/showthread.php?t=2061614

after registering the printer;

one registers it with the ccpd daemon

and then starts ccpd

and then tries a test print ........

what does

captstatusui -P LBP6000

or

captstatusui -P LBP6018

give you?

this link

http://www.imagestore.co.in/canon-lb...r-printer.html

says the 6018 is a colour printer but then says it only prints B&W !!

I imagine the 6000 is B&W also