Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: Error: BrokenCount > 0

  1. #1
    Join Date
    Jun 2012
    Beans
    10

    Error: BrokenCount > 0

    I keep running into 'Error: BrokenCount > 0', which started appearing after an update and a few program installs.

    This is the error in more detail:
    Code:
    The following packages have unmet dependencies:
    
    bind9-host: Depends: libbind9-80 (= 1:9.8.1.dfsg.P1-4ubuntu0.2) but 1:9.8.1.dfsg.P1-4ubuntu0.3 is installed
                Depends: libdns81 (= 1:9.8.1.dfsg.P1-4ubuntu0.2) but 1:9.8.1.dfsg.P1-4ubuntu0.3 is installed
                Depends: libisc83 (= 1:9.8.1.dfsg.P1-4ubuntu0.2) but 1:9.8.1.dfsg.P1-4ubuntu0.3 is installed
                Depends: libisccfg82 (= 1:9.8.1.dfsg.P1-4ubuntu0.2) but 1:9.8.1.dfsg.P1-4ubuntu0.3 is installed
                Depends: liblwres80 (= 1:9.8.1.dfsg.P1-4ubuntu0.2) but 1:9.8.1.dfsg.P1-4ubuntu0.3 is installed
    dnsutils: Depends: libbind9-80 (= 1:9.8.1.dfsg.P1-4ubuntu0.2) but 1:9.8.1.dfsg.P1-4ubuntu0.3 is installed
              Depends: libdns81 (= 1:9.8.1.dfsg.P1-4ubuntu0.2) but 1:9.8.1.dfsg.P1-4ubuntu0.3 is installed
              Depends: libisc83 (= 1:9.8.1.dfsg.P1-4ubuntu0.2) but 1:9.8.1.dfsg.P1-4ubuntu0.3 is installed
              Depends: libisccfg82 (= 1:9.8.1.dfsg.P1-4ubuntu0.2) but 1:9.8.1.dfsg.P1-4ubuntu0.3 is installed
              Depends: liblwres80 (= 1:9.8.1.dfsg.P1-4ubuntu0.2) but 1:9.8.1.dfsg.P1-4ubuntu0.3 is installed
    I also tried to do a sudo apt-get install -f, but ran into this error:
    Code:
    Reading package lists... Done
    Building dependency tree       
    Reading state information... Done
    Correcting dependencies... Done
    The following packages were automatically installed and are no longer required:
      libunity6 linux-headers-3.2.0-24 linux-headers-3.2.0-24-generic
      linux-headers-3.2.0-24-generic-pae
    Use 'apt-get autoremove' to remove them.
    The following extra packages will be installed:
      bind9-host dnsutils
    Suggested packages:
      rblcheck
    The following packages will be upgraded:
      bind9-host dnsutils
    2 upgraded, 0 newly installed, 0 to remove and 361 not upgraded.
    2 not fully installed or removed.
    Need to get 0 B/197 kB of archives.
    After this operation, 0 B of additional disk space will be used.
    Do you want to continue [Y/n]? y
    dpkg: dependency problems prevent configuration of bind9-host:
     bind9-host depends on libbind9-80 (= 1:9.8.1.dfsg.P1-4ubuntu0.2); however:
      Version of libbind9-80 on system is 1:9.8.1.dfsg.P1-4ubuntu0.3.
     bind9-host depends on libdns81 (= 1:9.8.1.dfsg.P1-4ubuntu0.2); however:
      Version of libdns81 on system is 1:9.8.1.dfsg.P1-4ubuntu0.3.
     bind9-host depends on libisc83 (= 1:9.8.1.dfsg.P1-4ubuntu0.2); however:
      Version of libisc83 on system is 1:9.8.1.dfsg.P1-4ubuntu0.3.
     bind9-host depends on libisccfg82 (= 1:9.8.1.dfsg.P1-4ubuntu0.2); however:
      Version of libisccfg82 on system is 1:9.8.1.dfsg.P1-4ubuntu0.3.
     bind9-host depends on liblwres80 (= 1:9.8.1.dfsg.P1-4ubuntu0.2); however:
      Version of liblwres80 on system is 1:9.8.1.dfsg.P1-4ubuntu0.3.
    dpkg: error processing bind9-host (--configure):
     dependency problems - leaving unconfigured
    No apport report written because the error message indicates its a followup error from a previous failure.
                              dpkg: dependency problems prevent configuration of dnsutils:
     dnsutils depends on libbind9-80 (= 1:9.8.1.dfsg.P1-4ubuntu0.2); however:
      Version of libbind9-80 on system is 1:9.8.1.dfsg.P1-4ubuntu0.3.
     dnsutils depends on libdns81 (= 1:9.8.1.dfsg.P1-4ubuntu0.2); however:
      Version of libdns81 on system is 1:9.8.1.dfsg.P1-4ubuntu0.3.
     dnsutils depends on libisc83 (= 1:9.8.1.dfsg.P1-4ubuntu0.2); however:
      Version of libisc83 on system is 1:9.8.1.dfsg.P1-4ubuntu0.3.
     dnsutils depends on libisccfg82 (= 1:9.8.1.dfsg.P1-4ubuntu0.2); however:
      Version of libisccfg82 on system is 1:9.8.1.dfsg.P1-4ubuntu0.3.
     dnsutils depends on liblwres80 (= 1:9.8.1.dfsg.P1-4ubuntu0.2); however:
      Version of liblwres80 on system is 1:9.8.1.dfsg.P1-4ubuntu0.3.
     dnsutils depends on bind9-host | host; however:
      Package bind9-host is not configured yet.
      Package host is not installed.
      Package bind9-host which provides host is not configured yet.
    dpkg: error processing dnsutils (--configure):
     dependency problems - leaving unconfigured
    No apport report written because the error message indicates its a followup error from a previous failure.
                              Errors were encountered while processing:
     bind9-host
     dnsutils
    E: Sub-process /usr/bin/dpkg returned an error code (1)
    So what should I try to do to fix this? Thanks.

  2. #2
    Join Date
    Jun 2012
    Beans
    10

    Re: Error: BrokenCount > 0

    [Bump] Still Unresolved.

  3. #3
    Join Date
    Jun 2006
    Location
    Nux Jam
    Beans
    Hidden!
    Distro
    Ubuntu Development Release

    Re: Error: BrokenCount > 0

    which ubuntu are you using ?
    is it a genuine install ?
    where come from the extra installed apps ?

    Please post the result of that command into a terminal:

    cat /etc/apt/sources.list

  4. #4
    Join Date
    Jun 2012
    Beans
    10

    Re: Error: BrokenCount > 0

    Quote Originally Posted by dino99 View Post
    which ubuntu are you using ?
    is it a genuine install ?
    where come from the extra installed apps ?

    Please post the result of that command into a terminal:

    cat /etc/apt/sources.list
    Using 12.04LTS 32Bit, and it is a genuine install dual-booted with windows 7.

    Code:
    cat /etc/apt/sources.list
    # deb cdrom:[Ubuntu 11.04 _Natty Narwhal_ - Release i386 (20110427.1)]/ natty main restricted
    
    # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
    # newer versions of the distribution.
    deb http://us.archive.ubuntu.com/ubuntu/ precise main restricted
    deb-src http://us.archive.ubuntu.com/ubuntu/ precise main restricted
    
    ## Major bug fix updates produced after the final release of the
    ## distribution.
    deb http://us.archive.ubuntu.com/ubuntu/ precise-updates main restricted
    deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates main restricted
    
    ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu
    ## team. Also, please note that software in universe WILL NOT receive any
    ## review or updates from the Ubuntu security team.
    deb http://us.archive.ubuntu.com/ubuntu/ precise universe
    deb-src http://us.archive.ubuntu.com/ubuntu/ precise universe
    deb http://us.archive.ubuntu.com/ubuntu/ precise-updates universe
    deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates universe
    
    ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu 
    ## team, and may not be under a free licence. Please satisfy yourself as to 
    ## your rights to use the software. Also, please note that software in 
    ## multiverse WILL NOT receive any review or updates from the Ubuntu
    ## security team.
    deb http://us.archive.ubuntu.com/ubuntu/ precise multiverse
    deb-src http://us.archive.ubuntu.com/ubuntu/ precise multiverse
    deb http://us.archive.ubuntu.com/ubuntu/ precise-updates multiverse
    deb-src http://us.archive.ubuntu.com/ubuntu/ precise-updates multiverse
    
    ## Uncomment the following two lines to add software from the 'backports'
    ## repository.
    ## N.B. software from this repository may not have been tested as
    ## extensively as that contained in the main release, although it includes
    ## newer versions of some applications which may provide useful features.
    ## Also, please note that software in backports WILL NOT receive any review
    ## or updates from the Ubuntu security team.
    # deb http://us.archive.ubuntu.com/ubuntu/ natty-backports main restricted universe multiverse
    # deb-src http://us.archive.ubuntu.com/ubuntu/ natty-backports main restricted universe multiverse
    
    deb http://security.ubuntu.com/ubuntu precise-security main restricted
    deb-src http://security.ubuntu.com/ubuntu precise-security main restricted
    deb http://security.ubuntu.com/ubuntu precise-security universe
    deb-src http://security.ubuntu.com/ubuntu precise-security universe
    deb http://security.ubuntu.com/ubuntu precise-security multiverse
    deb-src http://security.ubuntu.com/ubuntu precise-security multiverse
    
    ## Uncomment the following two lines to add software from Canonical's
    ## 'partner' repository.
    ## This software is not part of Ubuntu, but is offered by Canonical and the
    ## respective vendors as a service to Ubuntu users.
    # deb http://archive.canonical.com/ubuntu natty partner
    # deb-src http://archive.canonical.com/ubuntu natty partner
    
    ## This software is not part of Ubuntu, but is offered by third-party
    ## developers who want to ship their latest software.
    deb http://extras.ubuntu.com/ubuntu precise main
    deb-src http://extras.ubuntu.com/ubuntu precise main
    Also apt-get update works fine but it doesn't do anything to fix the problem.
    Last edited by Tovarishch; October 9th, 2012 at 08:14 PM.

  5. #5
    Join Date
    Jun 2012
    Beans
    10

    Re: Error: BrokenCount > 0

    [Bump] Still Unresolved.

  6. #6
    Join Date
    Jun 2012
    Beans
    10

    Re: Error: BrokenCount > 0

    Quote Originally Posted by Tovarishch View Post
    [Bump] Still Unresolved.
    I've tried everything I could think of, I don't know whatelse to do.

  7. #7
    Join Date
    Jun 2012
    Beans
    10

    Re: Error: BrokenCount > 0

    I tried downloading the files separate from the Ubuntu packages, but it wouldn't let me install it.

    Tried also to do apt-get clean and autoclean, and that didn't do anything either.

  8. #8
    Join Date
    Jun 2012
    Beans
    10

    Re: Error: BrokenCount > 0

    [Bump] Unresolved still.

  9. #9
    Join Date
    May 2010
    Location
    uk
    Beans
    9,249
    Distro
    Xubuntu 14.04 Trusty Tahr

    Re: Error: BrokenCount > 0

    Hi

    Let's have a look at the ppa's you have installed on your system as well as tha main sources.list file.

    Open a terminal and type

    Code:
    grep -H -v ^# /etc/apt/sources.list.d/*
    This command is case sensitive so requires a capital H. Please post back the results.

    This is an upgrade from Natty ?

    Kind regards
    If you believe everything you read, you better not read. ~ Japanese Proverb

    If you don't read the newspaper, you're uninformed. If you read the newspaper, you're mis-informed. - Mark Twain

    Thinking about becoming an Ubuntu Member?

  10. #10
    Join Date
    Sep 2012
    Location
    Virginia, USA
    Beans
    200
    Distro
    Ubuntu Development Release

    Re: Error: BrokenCount > 0

    See if clearing APT's cache before attempting to fix broken packages helps:

    Code:
    sudo apt-get clean
    sudo apt-get update
    sudo dpkg --configure -a
    sudo apt-get install -f
    Check if that fixes it. If it doesn't, you can try a bit more drastically clearing out old stuff and updating, using the following commands:

    Code:
    sudo mv /var/lib/dpkg/status /var/lib/dpkg/status-bad
    sudo cp /var/lib/dpkg/status-old /var/lib/dpkg/status
    sudo mv /var/lib/dpkg/available /var/lib/dpkg/available-bad
    sudo cp /var/lib/dpkg/available-old /var/lib/dpkg/available
    sudo rm -rf /var/lib/dpkg/updates/*
    sudo rm -rf /var/lib/apt/lists/*
    sudo mkdir /var/lib/apt/lists/partial
    sudo rm /var/cache/apt/*.bin
    sudo apt-get clean
    sudo apt-get autoremove
    sudo apt-get update
    sudo dpkg --configure -a
    sudo apt-get install -f
    Asus K55A (Core i5-3210M @ 2.5GHz/8GB RAM/120GB SSD/Intel HD 4000) with Ubuntu 12.10 Beta 2
    Compaq Presario C700 (Pentium Dual-Core @ 1.6GHz/2.5GB RAM/500GB HDD/Intel GM965) with Arch Linux and Linux Mint Debian Edition

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •