Page 12 of 14 FirstFirst ... 21011121314 LastLast
Results 111 to 120 of 138

Thread: Asus n13 wireless adapter

  1. #111
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    22,718
    Distro
    Ubuntu Development Release

    Re: Asus n13 wireless adapter

    There is no need to delete it. When you install the freshly downloaded driver, the old one will be over-written.

    Have you tried with no encryption at all? Even better, with WPA2-PSK?
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

  2. #112
    Join Date
    Oct 2012
    Location
    Icecold, Andromeda
    Beans
    126
    Distro
    Ubuntu Studio 12.04 Precise Pangolin

    Re: Asus n13 wireless adapter

    On the drop down menu i chose none and i clicked on save but nothing happens. I does not refresh or connect. I click on my wireless or the edit on the bottom and no response . I can click as many times as i want but no response.

  3. #113
    Join Date
    Oct 2012
    Location
    Icecold, Andromeda
    Beans
    126
    Distro
    Ubuntu Studio 12.04 Precise Pangolin

    Re: Asus n13 wireless adapter

    Rebooted and now i clicked on the network and it responded/asked the key. I clicked on the edit and to see whether the "none" no key on the wireless security setting still in place and it is still in place yet still asked the key code. Then it refreshed and few seconds later replied with "wireless network disconnected" and it tries again and again with the same response.

  4. #114
    Join Date
    Oct 2012
    Location
    Icecold, Andromeda
    Beans
    126
    Distro
    Ubuntu Studio 12.04 Precise Pangolin

    Re: Asus n13 wireless adapter

    No change on wpa/wpa2 personal on settings. When i wanted to set the wpa/wpa2 on enterprise, it would hightlight "Save' button on the bottom right when entered key. No change on leap and dynamic either, even though i dont know what those are.

  5. #115
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    22,718
    Distro
    Ubuntu Development Release

    Re: Asus n13 wireless adapter

    Quote Originally Posted by Marthewicked View Post
    No change on wpa/wpa2 personal on settings. When i wanted to set the wpa/wpa2 on enterprise, it would hightlight "Save' button on the bottom right when entered key. No change on leap and dynamic either, even though i dont know what those are.
    You certainly don't want Enterprise or LEAP, WPA2-Personal is preferred.

    After you make changes, there should be a place to save. Then, I'd delete your old settings and reboot.
    Code:
    sudo rm -rf /etc/NetworkManager/system-connections/*
    If you can't find a place to save in the router, maybe I can help. What is the make and model of router?
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

  6. #116
    Join Date
    Oct 2012
    Location
    Icecold, Andromeda
    Beans
    126
    Distro
    Ubuntu Studio 12.04 Precise Pangolin

    Re: Asus n13 wireless adapter

    Wait, you were asking me on the desktop correct? I am connected to the router through my cell phone then to computer, that is how im coming back online and so forth. I will delete as you suggest and try on personal then see what happens, for the meantime, i will get router info.

  7. #117
    Join Date
    Oct 2012
    Location
    Icecold, Andromeda
    Beans
    126
    Distro
    Ubuntu Studio 12.04 Precise Pangolin

    Re: Asus n13 wireless adapter

    WPA/WPA2 never connected even before, i could have saved that one and it did. WPA/WPA2 on enterprise would not have saved, or it would not let me. I ran the code and rebooted no difference.

  8. #118
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    22,718
    Distro
    Ubuntu Development Release

    Re: Asus n13 wireless adapter

    In the router, set WPA2-PSK, not WPA/WPA2 if possible. Then, back in the computer, delete the settings, reboot, and try to connect. If you can't, post:
    Code:
    dmesg | grep -e wlan -e 8192
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

  9. #119
    Join Date
    Oct 2012
    Location
    Icecold, Andromeda
    Beans
    126
    Distro
    Ubuntu Studio 12.04 Precise Pangolin

    Re: Asus n13 wireless adapter

    I dont have access to the router long story and i dont want to get into that. Long story. However im connected and know it works because i can connect oher stuff, cell phone and other computers.

    here is for the code,

    mar@mar-Vostro-200:~$ dmesg | grep -e wlan -e 8192
    [ 0.717333] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
    [ 11.965007] CHIP TYPE: RTL8188C_8192C
    [ 11.967560] ====> ReadAdapterInfo8192C
    [ 12.367366] readAdapterInfo_8192CU(): REPLACEMENT = 1
    [ 12.367369] <==== ReadAdapterInfo8192C in 400 ms
    [ 12.369651] usbcore: registered new interface driver rtl8192cu
    [ 13.496710] rtl8192cu_hal_init in 692ms
    [ 13.507873] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 13.508464] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 14.735205] Error: Driver 'rtl8192cu' is already registered, aborting...
    [ 181.579446] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [ 181.587415] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
    [ 191.760053] wlan0: no IPv6 routers present
    [ 227.219506] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
    [ 231.175362] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
    [ 241.472020] wlan0: no IPv6 routers present
    [ 276.218773] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
    [ 280.254789] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
    [ 290.384032] wlan0: no IPv6 routers present
    [ 326.222672] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
    [ 330.252582] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
    [ 340.480026] wlan0: no IPv6 routers present
    [ 375.219565] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
    [ 676.214220] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
    [ 686.320092] wlan0: no IPv6 routers present
    [ 721.226135] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
    [ 725.247139] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
    [ 735.632020] wlan0: no IPv6 routers present
    [ 771.215786] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
    [ 775.217663] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
    [ 785.296024] wlan0: no IPv6 routers present
    [ 820.219814] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
    [ 824.269945] rtl8192c_set_FwJoinBssReport_cmd mstatus(1)
    [ 834.784026] wlan0: no IPv6 routers present
    [ 870.217474] rtl8192c_set_FwJoinBssReport_cmd mstatus(0)
    mar@mar-Vostro-200:~$

  10. #120
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    22,718
    Distro
    Ubuntu Development Release

    Re: Asus n13 wireless adapter

    [ 12.369651] usbcore: registered new interface driver rtl8192cu
    [ 13.496710] rtl8192cu_hal_init in 692ms
    [ 13.507873] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 13.508464] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [ 14.735205] Error: Driver 'rtl8192cu' is already registered, aborting...
    May I see:
    Code:
    lsmod | grep 819
    cat /etc/modprobe.d/blacklist.conf | tail -n10
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

Page 12 of 14 FirstFirst ... 21011121314 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •