Estimados:
Tengo un pc de escritorio con windows y ubuntu 12.04, hace unos 2 meses aproximado empecé a tener problemas en el arranque. Iniciaba, prendía la pantalla, mostraba la bios, mostraba el grub, y al elegir windows o ubuntu, el pc se apagaba completamente. Al principio al segundo intento arrancaba bien, pero poco a poco tenía que reintentarlo más veces al punto que arrancar con windows me era imposible, de cada 8 a 10 intentos, uno funcionaba. Fui desconectando uno por uno cada dispositivo pero el problema persisitía (lector de dvd-tarjeta gráfica- otro disco duro-memoria).
Me di cuenta que sacando una de las memorías (tengo 2 de un giga cada una), se "arreglaba" el problema, volví a uno de cada 2 ó 3 intentos. El sistema se tornó bastante lento y un poco inestable. En windows (cuando puedo ingresar), por lo general de improviso me pone la típica pantalla azul, con ubuntu es más estable, pero en un par de ocasiones se me ha congelado el sistema y he tenido que apagarla a la mala (no responde nada).
Ahora bien, se me ocurrió chequear el disco duro con gsmartcontrol y detectó un problema (gsmart1.jpg).
El log completo es:
Complete error log:
SMART Error Log Version: 1
ATA Error Count: 107 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 107 occurred at disk power-on lifetime: 8256 hours (344 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f1 96 1b e6 Error: UNC at LBA = 0x061b96f1 = 102471409
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 06 f1 96 1b 06 0a 00:51:47.849 READ DMA
ec 00 00 00 00 00 00 0a 00:51:47.840 IDENTIFY DEVICE
ef 03 46 00 00 00 00 0a 00:51:47.833 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 0a 00:51:47.825 IDENTIFY DEVICE
c8 00 06 f1 96 1b 06 0a 00:51:44.356 READ DMA
Error 106 occurred at disk power-on lifetime: 8256 hours (344 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f1 96 1b e6 Error: UNC at LBA = 0x061b96f1 = 102471409
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 06 f1 96 1b 06 0a 00:51:44.356 READ DMA
ec 00 00 00 00 00 00 0a 00:51:44.347 IDENTIFY DEVICE
ef 03 46 00 00 00 00 0a 00:51:44.340 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 0a 00:51:44.334 IDENTIFY DEVICE
c8 00 06 f1 96 1b 06 0a 00:51:40.860 READ DMA
Error 105 occurred at disk power-on lifetime: 8256 hours (344 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f1 96 1b e6 Error: UNC at LBA = 0x061b96f1 = 102471409
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 06 f1 96 1b 06 0a 00:51:40.860 READ DMA
ec 00 00 00 00 00 00 0a 00:51:40.851 IDENTIFY DEVICE
ef 03 46 00 00 00 00 0a 00:51:40.844 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 0a 00:51:40.836 IDENTIFY DEVICE
c8 00 06 f1 96 1b 06 0a 00:51:37.627 READ DMA
Error 104 occurred at disk power-on lifetime: 8256 hours (344 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f1 96 1b e6 Error: UNC at LBA = 0x061b96f1 = 102471409
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 06 f1 96 1b 06 0a 00:51:37.627 READ DMA
ec 00 00 00 00 00 00 0a 00:51:37.618 IDENTIFY DEVICE
ef 03 46 00 00 00 00 0a 00:51:37.611 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 0a 00:51:37.603 IDENTIFY DEVICE
c8 00 06 f1 96 1b 06 0a 00:51:34.134 READ DMA
Error 103 occurred at disk power-on lifetime: 8256 hours (344 days + 0 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 f1 96 1b e6 Error: UNC at LBA = 0x061b96f1 = 102471409
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 06 f1 96 1b 06 0a 00:51:34.134 READ DMA
ec 00 00 00 00 00 00 0a 00:51:34.125 IDENTIFY DEVICE
ef 03 46 00 00 00 00 0a 00:51:34.118 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 0a 00:51:34.113 IDENTIFY DEVICE
c8 00 06 f1 96 1b 06 0a 00:51:30.641 READ DMA
Por su parte Gparted me arroja los siguiente:
Gparted 1
Gparted 2
El log completo es el siguiente:
GParted 0.11.0 --enable-libparted-dmraid
Libparted 2.3
Verificar y reparar el sistema de archivos (ntfs) en /dev/sdc1 00:00:00 ( ERROR ) calibrar /dev/sdc1 00:00:00 ( ÉXITO ) ruta: /dev/sdc1
inicio: 63
fin: 204.796.619
tamaño: 204.796.557 (97.65 GiB)comprobar errores en el sistema de archivos en /dev/sdc1 y (si es posible) arreglarlos 00:00:00 ( ERROR ) ntfsresize -P -i -f -v /dev/sdc1 ntfsresize v2012.1.15AR.1 (libntfs-3g)
Device name : /dev/sdc1
NTFS volume version: 3.1
Cluster size : 4096 bytes
Current volume size: 104855835136 bytes (104856 MB)
Current device size: 104855837184 bytes (104856 MB)
Checking for bad sectors ...
Bad cluster: 0xc372d6 - 0xc372d6 (1)
ERROR: This software has detected that the disk has at least 1 bad sector.
************************************************** **************************
* WARNING: The disk has bad sector. This means physical damage on the disk *
* surface caused by deterioration, manufacturing faults or other reason. *
* The reliability of the disk may stay stable or degrade fast. We suggest *
* making a full backup urgently by running 'ntfsclone --rescue ...' then *
* run 'chkdsk /f /r' on Windows and rebooot it TWICE! Then you can resize *
* NTFS safely by additionally using the --bad-sectors option of ntfsresize.*
************************************************** **************************
========================================
Mi consulta es si mis problemas de reinicios se pueden deber a esto o no; mi problema aumenta ya que ni siquiera puedo respaldar mi información, intenté hacer un backup con clonzilla y no se puede, lo que mas me inquieta es la posible pérdida de información.
Por favor si alguien me puede dar algún comentario o sugerencia se lo agradecería.
Saludos
Adv Reply
Bookmarks