Results 1 to 1 of 1

Thread: Asus M4A88TD-V EVO /USB3 motherboard

  1. #1
    Join Date
    Aug 2012
    Beans
    1

    Asus M4A88TD-V EVO /USB3 motherboard

    Hi,

    I try to install Ubuntu (serveral version like 10, 11 & 12.04) on Asus M4A88TD-V EVO /USB3 motherboard and when I boot up Ubuntu from liveCD and begin to install this system on my Desktop PC computer, then computer stop working (even my optic mouse doesn't give any light when I move it).

    I send several email's to Asus supports, but they said that they don't give support for linux system ;-(

    My computer are:
    - processor AMD Phenom II X4 955 Black Edition
    - motherboard ASUS M4A88TD-V EVO/USB3
    - sound card ASUS Xonar DX
    - integral graphic card HD4250
    - Memmory 12 GB RAM Kingstone 2x2 + 4x2 in dual

    My BIOS are default settings.

    I try to install any another linux system like OpenSuse, Fedora, or Mandriva, but they doesn't work too.

    Several times I can install Ubuntu (after a lot of try's) but even then I can't work with Ubuntu, because ones it halted when starts, another times doesn't start's (seens like my computer don't see it, and automated boots Windows7 from another partition even don't display a grub).

    Sometimes even a LiveCD with Ubuntu 12.04 doesn't starts.

    I was read that's maby is a PATA od VIA controller problem, but I'm not sure.

    I like Ubuntu on my laptop, but I can't install it to my PC ;-( is eny chance that's my problem can be solved?

    I even try install linux's with nomodeset- does't helps ;-(

    This is OpenSuse test of my machine:
    -----------------------------------------------------------------------------
    [FAIL] HPET configuration test
    F Failed to lokate HPET base
    [FAIL] CPU frequency scaling test (1-2 mins)
    4 CPU frequency steps supported

    F Supposedly higher frequency is slower on CPU 0!
    F Supposedly higher frequency is slower on CPU 0!
    F Supposedly higher frequency is slower on CPU 0!
    F Supposedly higher frequency is slower on CPU 0!
    ...
    F Supposedly higher frequency is slower on CPU 1!
    F Supposedly higher frequency is slower on CPU 1!
    F Supposedly higher frequency is slower on CPU 2!
    F Supposedly higher frequency is slower on CPU 2!
    F Supposedly higher frequency is slower on CPU 3!
    F Supposedly higher frequency is slower on CPU 3!
    F Processors are set to SW_ANY
    F Firmware not implementing hardware coordination cleanly. Firmware using SW_ALL instead?
    [FAIL] MTRR validation
    F Memory range 0xd0000000 to 0xdfffffff (PCI Bus 0000:00) has incorrect attribute write-combining
    F Memory range 0x100000000 to 0x31fffffff (System RAM) has incorrect attribute default
    F Memory range 0x100000000 to 0x31fffffff (System RAM) is lacking attrbute write-back
    [FAIL] OS/2 memory hole test
    F The memory map has a memory hole between 15Gb and 16Mb
    [FAIL] DMI information check
    F No SMBIOS nor DMI entry point found.
    F No SMBIOS nor DMI entry point found.
    F No SMBIOS nor DMI entry point found.
    F No SMBIOS nor DMI entry point found.
    F No SMBIOS nor DMI entry point found.
    F No SMBIOS nor DMI entry point found.
    F No SMBIOS nor DMI entry point found.
    ...
    [WARN] ACPI passive thermal trip points
    W Cannot test trip points without existing /proc/acpi/thermal_zone.
    [WARN] Fan tests
    W No fan information present
    Last edited by qpeace1; August 28th, 2012 at 11:32 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •