Code:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: -
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/ubuntu/grubx64.efi
sda2: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04.1 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: vfat
Boot sector type: SYSLINUX 4.06 4.06-pre1
Boot sector info: Syslinux looks at sector 30792 of /dev/sdb1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg
/efi/boot/bootx64.efi /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 128.0 GB, 128035676160 bytes
255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 250,069,679 250,069,679 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 34 195,346 195,313 EFI System partition
/dev/sda2 195,347 241,855,503 241,660,157 Data partition (Windows/Linux)
/dev/sda3 241,855,504 250,069,630 8,214,127 Swap partition (Linux)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 8076 MB, 8076132352 bytes
255 heads, 63 sectors/track, 981 cylinders, total 15773696 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 63 15,773,695 15,773,633 c W95 FAT32 (LBA)
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 0251-AE32 vfat
/dev/sda2 5d7c1063-88cf-48ad-a22c-62fa01df6cd7 ext4
/dev/sda3 9bd2ff79-536d-4fc7-b595-7a53eb66bb19 swap
/dev/sdb1 0000-0001 vfat PENDRIVE
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda2 /media/5d7c1063-88cf-48ad-a22c-62fa01df6cd7 ext4 (rw,nosuid,nodev,uhelper=udisks)
/dev/sdb1 /cdrom vfat (rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
=========================== sda2/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod efi_gop
insmod efi_uga
insmod video_bochs
insmod video_cirrus
}
insmod part_gpt
insmod ext2
set root='(hd0,gpt2)'
search --no-floppy --fs-uuid --set=root 5d7c1063-88cf-48ad-a22c-62fa01df6cd7
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
insmod part_gpt
insmod ext2
set root='(hd0,gpt2)'
search --no-floppy --fs-uuid --set=root 5d7c1063-88cf-48ad-a22c-62fa01df6cd7
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.2.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt2)'
search --no-floppy --fs-uuid --set=root 5d7c1063-88cf-48ad-a22c-62fa01df6cd7
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=5d7c1063-88cf-48ad-a22c-62fa01df6cd7 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-29-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt2)'
search --no-floppy --fs-uuid --set=root 5d7c1063-88cf-48ad-a22c-62fa01df6cd7
echo 'Loading Linux 3.2.0-29-generic ...'
linux /boot/vmlinuz-3.2.0-29-generic root=UUID=5d7c1063-88cf-48ad-a22c-62fa01df6cd7 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-29-generic
}
submenu "Previous Linux versions" {
menuentry 'Ubuntu, with Linux 3.2.0-27-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt2)'
search --no-floppy --fs-uuid --set=root 5d7c1063-88cf-48ad-a22c-62fa01df6cd7
linux /boot/vmlinuz-3.2.0-27-generic root=UUID=5d7c1063-88cf-48ad-a22c-62fa01df6cd7 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-27-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-27-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt2)'
search --no-floppy --fs-uuid --set=root 5d7c1063-88cf-48ad-a22c-62fa01df6cd7
echo 'Loading Linux 3.2.0-27-generic ...'
linux /boot/vmlinuz-3.2.0-27-generic root=UUID=5d7c1063-88cf-48ad-a22c-62fa01df6cd7 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-27-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-26-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt2)'
search --no-floppy --fs-uuid --set=root 5d7c1063-88cf-48ad-a22c-62fa01df6cd7
linux /boot/vmlinuz-3.2.0-26-generic root=UUID=5d7c1063-88cf-48ad-a22c-62fa01df6cd7 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-26-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt2)'
search --no-floppy --fs-uuid --set=root 5d7c1063-88cf-48ad-a22c-62fa01df6cd7
echo 'Loading Linux 3.2.0-26-generic ...'
linux /boot/vmlinuz-3.2.0-26-generic root=UUID=5d7c1063-88cf-48ad-a22c-62fa01df6cd7 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-26-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt2)'
search --no-floppy --fs-uuid --set=root 5d7c1063-88cf-48ad-a22c-62fa01df6cd7
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=5d7c1063-88cf-48ad-a22c-62fa01df6cd7 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-23-generic
}
menuentry 'Ubuntu, with Linux 3.2.0-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod gzio
insmod part_gpt
insmod ext2
set root='(hd0,gpt2)'
search --no-floppy --fs-uuid --set=root 5d7c1063-88cf-48ad-a22c-62fa01df6cd7
echo 'Loading Linux 3.2.0-23-generic ...'
linux /boot/vmlinuz-3.2.0-23-generic root=UUID=5d7c1063-88cf-48ad-a22c-62fa01df6cd7 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.2.0-23-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_gpt
insmod ext2
set root='(hd0,gpt2)'
search --no-floppy --fs-uuid --set=root 5d7c1063-88cf-48ad-a22c-62fa01df6cd7
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_gpt
insmod ext2
set root='(hd0,gpt2)'
search --no-floppy --fs-uuid --set=root 5d7c1063-88cf-48ad-a22c-62fa01df6cd7
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda2/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda2 during installation
UUID=5d7c1063-88cf-48ad-a22c-62fa01df6cd7 / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=0251-AE32 /boot/efi vfat defaults 0 1
# swap was on /dev/sda3 during installation
UUID=9bd2ff79-536d-4fc7-b595-7a53eb66bb19 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda2: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/grub.cfg 1
= boot/initrd.img-3.2.0-23-generic 1
= boot/initrd.img-3.2.0-26-generic 2
= boot/initrd.img-3.2.0-27-generic 2
= boot/initrd.img-3.2.0-29-generic 2
= boot/vmlinuz-3.2.0-23-generic 1
= boot/vmlinuz-3.2.0-26-generic 1
= boot/vmlinuz-3.2.0-27-generic 1
= boot/vmlinuz-3.2.0-29-generic 2
= vmlinuz 2
= vmlinuz.old 1
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
if loadfont /boot/grub/font.pf2 ; then
set gfxmode=auto
insmod efi_gop
insmod efi_uga
insmod gfxterm
terminal_output gfxterm
fi
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
menuentry "Try Ubuntu without installing" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper quiet splash --
initrd /casper/initrd.lz
}
menuentry "Install Ubuntu" {
set gfxpayload=keep
linux /casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper only-ubiquity quiet splash --
initrd /casper/initrd.lz
}
menuentry "Check disc for defects" {
set gfxpayload=keep
linux /casper/vmlinuz boot=casper integrity-check quiet splash --
initrd /casper/initrd.lz
}
--------------------------------------------------------------------------------
========================= sdb1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
# If you would like to use the new menu and be presented with the option to install or run from USB at startup, remove # from the following line. This line was commented out (by request of many) to allow the old menu to be presented and to enable booting straight into the Live Environment!
# ui gfxboot bootlogo
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
?? = ?? boot/grub/grub.cfg 1
================= sdb1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/chain.c32 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
syslinux/chain.c32 : COM32R module (v4.xx)
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
/home/ubuntu/Downloads/bootinfoscript: line 1646: [: 2.73495e+09: integer expression expected
Adv Reply
Bookmarks