how to configure com1
I have a com1 on my computer or a prolific USB-Serial converter.
How do I config them to 9600baud No parity 8bits 1stop
stty -F /dev/tty0 -a shows the speed as 38400
stty -F /dev/ttyUSB0 -a shows speed as 115200
Re: how to configure com1
First, are you sure this is Absolutely Beginners Talk? I think it was placed in the wrong forum. Anyway I found a link (You may have already seen it) that might help you out.
Check and use Serial Ports
All the Best,