HTML Code:
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.0-17-generic (buildd@roseapple) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #30-Ubuntu SMP Thu Mar 8 17:34:21 UTC 2012 (Ubuntu 3.0.0-17.30-generic 3.0.22)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fffc000 (usable)
[ 0.000000] BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: System Manufacturer System Name/MED 2001, BIOS ASUS MED 2001 ACPI BIOS Revision 1007 02/12/2001
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1fffc max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 0FC000000 mask FFE000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-000000001fffc000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001fc00000 page 2M
[ 0.000000] 001fc00000 - 001fffc000 page 4k
[ 0.000000] kernel direct mapping tables up to 1fffc000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 1e767000 - 1f46b000
[ 0.000000] ACPI: RSDP 000f61b0 00014 (v00 ASUS )
[ 0.000000] ACPI: RSDT 1fffc000 0002C (v01 ASUS MED_2001 30303031 MSFT 31313031)
[ 0.000000] ACPI: FACP 1fffc080 00074 (v01 ASUS MED_2001 30303031 MSFT 31313031)
[ 0.000000] ACPI: DSDT 1fffc100 02649 (v01 ASUS MED_2001 00001000 MSFT 0100000B)
[ 0.000000] ACPI: FACS 1ffff000 00040
[ 0.000000] ACPI: BOOT 1fffc040 00028 (v01 ASUS MED_2001 30303031 MSFT 31313031)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fffc000
[ 0.000000] low ram: 0 - 1fffc000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001fffc
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001fffc
[ 0.000000] On node 0 totalpages: 130955
[ 0.000000] free_area_init_node: node 0, pgdat c17b54c0, node_mem_map dfbfb200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125980 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xe408
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dfff0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @de000000 s26240 r0 d22912 u4194304
[ 0.000000] pcpu-alloc: s26240 r0 d22912 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129931
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-17-generic root=UUID=531fd004-53a1-4644-b083-2358792e0cb6 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2096832 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 494324k/524272k available (5340k kernel code, 29496k reserved, 2595k data, 696k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xe07fc000 - 0xff7fe000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdfffc000 ( 511 MB)
[ 0.000000] .init : 0xc17c1000 - 0xc186f000 ( 696 kB)
[ 0.000000] .data : 0xc15371c4 - 0xc17c0140 (2595 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15371c4 (5340 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=ddc06000 soft=ddc08000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 997.529 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 1995.05 BogoMIPS (lpj=3990116)
[ 0.004021] pid_max: default: 32768 minimum: 301
[ 0.004078] Security Framework initialized
[ 0.004136] AppArmor: AppArmor initialized
[ 0.004142] Yama: becoming mindful.
[ 0.004298] Mount-cache hash table entries: 512
[ 0.004636] Initializing cgroup subsys cpuacct
[ 0.004654] Initializing cgroup subsys memory
[ 0.004679] Initializing cgroup subsys devices
[ 0.004687] Initializing cgroup subsys freezer
[ 0.004694] Initializing cgroup subsys net_cls
[ 0.004701] Initializing cgroup subsys blkio
[ 0.004719] Initializing cgroup subsys perf_event
[ 0.004803] mce: CPU supports 5 MCE banks
[ 0.004949] SMP alternatives: switching to UP code
[ 0.018788] Freeing SMP alternatives: 24k freed
[ 0.018832] ACPI: Core revision 20110413
[ 0.022486] ACPI: setting ELCR to 0200 (from 0e20)
[ 0.022703] ftrace: allocating 24903 entries in 49 pages
[ 0.028321] weird, boot CPU (#0) not listed by the BIOS.
[ 0.028336] SMP motherboard not detected.
[ 0.028342] Local APIC not detected. Using dummy APIC emulation.
[ 0.028347] SMP disabled
[ 0.028354] Performance Events:
[ 0.028361] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.028367] no hardware sampling interrupt available.
[ 0.028376] p6 PMU driver.
[ 0.028392] ... version: 0
[ 0.028397] ... bit width: 32
[ 0.028401] ... generic registers: 2
[ 0.028407] ... value mask: 00000000ffffffff
[ 0.028413] ... max period: 000000007fffffff
[ 0.028418] ... fixed-purpose events: 0
[ 0.028423] ... event mask: 0000000000000003
[ 0.033214] Brought up 1 CPUs
[ 0.033229] Total of 1 processors activated (1995.05 BogoMIPS).
[ 0.033834] devtmpfs: initialized
[ 0.034390] PM: Registering ACPI NVS region at 1ffff000 (4096 bytes)
[ 0.041824] print_constraints: dummy:
[ 0.041884] Time: 10:01:50 Date: 06/26/12
[ 0.042032] NET: Registered protocol family 16
[ 0.042359] EISA bus registered
[ 0.042394] ACPI: bus type pci registered
[ 0.043593] PCI: PCI BIOS revision 2.10 entry at 0xf0900, last bus=1
[ 0.043600] PCI: Using configuration type 1 for base access
[ 0.046620] bio: create slab <bio-0> at 0
[ 0.048046] ACPI: EC: Look up EC in DSDT
[ 0.051822] ACPI: Interpreter enabled
[ 0.051842] ACPI: (supports S0 S1 S4 S5)
[ 0.051906] ACPI: Using PIC for interrupt routing
[ 0.066155] ACPI: No dock devices found.
[ 0.066165] HEST: Table not found.
[ 0.066178] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.066385] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.066792] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.066801] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.066810] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.066819] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
[ 0.066827] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffffffff] (ignored)
[ 0.066859] pci 0000:00:00.0: [1106:0691] type 0 class 0x000600
[ 0.066878] pci 0000:00:00.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
[ 0.066958] pci 0000:00:01.0: [1106:8598] type 1 class 0x000604
[ 0.067005] pci 0000:00:01.0: supports D1
[ 0.067030] pci 0000:00:04.0: [1106:0686] type 0 class 0x000601
[ 0.067117] pci 0000:00:04.1: [1106:0571] type 0 class 0x000101
[ 0.067164] pci 0000:00:04.1: reg 20: [io 0xd800-0xd80f]
[ 0.067233] pci 0000:00:04.2: [1106:3038] type 0 class 0x000c03
[ 0.067279] pci 0000:00:04.2: reg 20: [io 0xd400-0xd41f]
[ 0.067339] pci 0000:00:04.3: [1106:3038] type 0 class 0x000c03
[ 0.067384] pci 0000:00:04.3: reg 20: [io 0xd000-0xd01f]
[ 0.067444] pci 0000:00:04.4: [1106:3057] type 0 class 0x000600
[ 0.067492] pci 0000:00:04.4: quirk: [io 0xe400-0xe4ff] claimed by vt82c586 ACPI
[ 0.067503] pci 0000:00:04.4: quirk: [io 0xe800-0xe80f] claimed by vt82c686 SMB
[ 0.067552] pci 0000:00:05.0: [1274:5880] type 0 class 0x000401
[ 0.067572] pci 0000:00:05.0: reg 10: [io 0xb800-0xb83f]
[ 0.067640] pci 0000:00:05.0: supports D1 D2
[ 0.067668] pci 0000:00:09.0: [1317:0985] type 0 class 0x000200
[ 0.067689] pci 0000:00:09.0: reg 10: [io 0xb400-0xb4ff]
[ 0.067704] pci 0000:00:09.0: reg 14: [mem 0xed800000-0xed8003ff]
[ 0.067744] pci 0000:00:09.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.067773] pci 0000:00:09.0: supports D1 D2
[ 0.067780] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.067790] pci 0000:00:09.0: PME# disabled
[ 0.067815] pci 0000:00:0a.0: [1244:0e00] type 0 class 0x000280
[ 0.067836] pci 0000:00:0a.0: reg 10: [mem 0xed000000-0xed00001f]
[ 0.067850] pci 0000:00:0a.0: reg 14: [io 0xb000-0xb01f]
[ 0.067911] pci 0000:00:0a.0: supports D2
[ 0.067918] pci 0000:00:0a.0: PME# supported from D2 D3hot D3cold
[ 0.067926] pci 0000:00:0a.0: PME# disabled
[ 0.067951] pci 0000:00:0b.0: [1033:0035] type 0 class 0x000c03
[ 0.067971] pci 0000:00:0b.0: reg 10: [mem 0xec800000-0xec800fff]
[ 0.068073] pci 0000:00:0b.0: supports D1 D2
[ 0.068080] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot
[ 0.068088] pci 0000:00:0b.0: PME# disabled
[ 0.068113] pci 0000:00:0b.1: [1033:0035] type 0 class 0x000c03
[ 0.068134] pci 0000:00:0b.1: reg 10: [mem 0xec000000-0xec000fff]
[ 0.068199] pci 0000:00:0b.1: supports D1 D2
[ 0.068205] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot
[ 0.068214] pci 0000:00:0b.1: PME# disabled
[ 0.068242] pci 0000:00:0b.2: [1033:00e0] type 0 class 0x000c03
[ 0.068263] pci 0000:00:0b.2: reg 10: [mem 0xeb800000-0xeb8000ff]
[ 0.068328] pci 0000:00:0b.2: supports D1 D2
[ 0.068335] pci 0000:00:0b.2: PME# supported from D0 D1 D2 D3hot
[ 0.068343] pci 0000:00:0b.2: PME# disabled
[ 0.068419] pci 0000:01:00.0: [10de:0150] type 0 class 0x000300
[ 0.068440] pci 0000:01:00.0: reg 10: [mem 0xee000000-0xeeffffff]
[ 0.068455] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff pref]
[ 0.068491] pci 0000:01:00.0: reg 30: [mem 0xefff0000-0xefffffff pref]
[ 0.068562] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.068572] pci 0000:00:01.0: bridge window [io 0xe000-0xd000] (disabled)
[ 0.068582] pci 0000:00:01.0: bridge window [mem 0xee000000-0xefdfffff]
[ 0.068592] pci 0000:00:01.0: bridge window [mem 0xeff00000-0xfbffffff pref]
[ 0.068607] pci_bus 0000:00: on NUMA node 0
[ 0.068620] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.068967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.069115] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.124030] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.124184] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.124331] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.124490] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.124803] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.124812] vgaarb: loaded
[ 0.124816] vgaarb: bridge control possible 0000:01:00.0
[ 0.125510] SCSI subsystem initialized
[ 0.125727] libata version 3.00 loaded.
[ 0.125882] usbcore: registered new interface driver usbfs
[ 0.125919] usbcore: registered new interface driver hub
[ 0.126006] usbcore: registered new device driver usb
[ 0.126293] PCI: Using ACPI for IRQ routing
[ 0.126307] PCI: pci_cache_line_size set to 32 bytes
[ 0.126404] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.126411] reserve RAM buffer: 000000001fffc000 - 000000001fffffff
[ 0.126729] NetLabel: Initializing
[ 0.126736] NetLabel: domain hash size = 128
[ 0.126740] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.126772] NetLabel: unlabeled traffic allowed by default
[ 0.126946] Switching to clocksource pit
[ 0.148501] AppArmor: AppArmor Filesystem Enabled
[ 0.148619] pnp: PnP ACPI init
[ 0.148678] ACPI: bus type pnp registered
[ 0.149124] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.149134] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.149142] pnp 00:00: [mem 0x00100000-0x1fffffff]
[ 0.149150] pnp 00:00: [mem 0xfffe0000-0xffffffff]
[ 0.149321] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.149332] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.149342] system 00:00: [mem 0x00100000-0x1fffffff] could not be reserved
[ 0.149352] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved
[ 0.149364] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.149772] pnp 00:01: [bus 00-ff]
[ 0.149782] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.149791] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.149799] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.149807] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.149815] pnp 00:01: [mem 0x000c8000-0x000dffff window]
[ 0.149823] pnp 00:01: [mem 0x20000000-0xffffffff window]
[ 0.149939] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.150058] pnp 00:02: [io 0x0010-0x001f]
[ 0.150066] pnp 00:02: [io 0x0022-0x002d]
[ 0.150074] pnp 00:02: [io 0x0030-0x003f]
[ 0.150081] pnp 00:02: [io 0x0044-0x005f]
[ 0.150088] pnp 00:02: [io 0x0062-0x0063]
[ 0.150095] pnp 00:02: [io 0x0065-0x006f]
[ 0.150102] pnp 00:02: [io 0x0074-0x007f]
[ 0.150109] pnp 00:02: [io 0x0091-0x0093]
[ 0.150116] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.150124] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.150131] pnp 00:02: [io 0x03f0-0x03f1]
[ 0.150138] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.150261] system 00:02: [io 0x03f0-0x03f1] has been reserved
[ 0.150270] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.150280] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.150339] pnp 00:03: [io 0xe400-0xe47f]
[ 0.150347] pnp 00:03: [io 0xe800-0xe80f]
[ 0.150371] pnp 00:03: disabling [io 0xe400-0xe47f] because it overlaps 0000:00:04.4 BAR 13 [io 0xe400-0xe4ff]
[ 0.150459] system 00:03: [io 0xe800-0xe80f] has been reserved
[ 0.150470] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.150610] pnp 00:04: [dma 4]
[ 0.150618] pnp 00:04: [io 0x0000-0x000f]
[ 0.150625] pnp 00:04: [io 0x0080-0x0090]
[ 0.150632] pnp 00:04: [io 0x0094-0x009f]
[ 0.150640] pnp 00:04: [io 0x00c0-0x00df]
[ 0.150725] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.150760] pnp 00:05: [io 0x0070-0x0073]
[ 0.150773] pnp 00:05: [irq 8]
[ 0.150847] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.150875] pnp 00:06: [io 0x0061]
[ 0.150950] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.150979] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.150988] pnp 00:07: [irq 13]
[ 0.151063] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.151411] pnp 00:08: [io 0x03f2-0x03f5]
[ 0.151419] pnp 00:08: [io 0x03f7]
[ 0.151436] pnp 00:08: [irq 6]
[ 0.151444] pnp 00:08: [dma 2]
[ 0.151568] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.152282] pnp 00:09: [io 0x0378-0x037f]
[ 0.152291] pnp 00:09: [io 0x0778-0x077b]
[ 0.152299] pnp 00:09: [irq 7]
[ 0.152306] pnp 00:09: [dma 3]
[ 0.152464] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.152917] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.152926] pnp 00:0a: [irq 4]
[ 0.153168] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.153692] pnp 00:0b: [io 0x02f8-0x02ff]
[ 0.153701] pnp 00:0b: [irq 3]
[ 0.153865] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.154074] pnp 00:0c: [io 0x0060]
[ 0.154082] pnp 00:0c: [io 0x0064]
[ 0.154089] pnp 00:0c: [irq 1]
[ 0.154172] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.154296] pnp 00:0d: [irq 12]
[ 0.154378] pnp 00:0d: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.154494] pnp: PnP ACPI: found 14 devices
[ 0.154501] ACPI: ACPI bus type pnp unregistered
[ 0.154512] PnPBIOS: Disabled by ACPI PNP
[ 0.194189] Switching to clocksource acpi_pm
[ 0.194276] PCI: max bus depth: 1 pci_try_num: 2
[ 0.194329] pci 0000:00:09.0: BAR 6: assigned [mem 0x20000000-0x2001ffff pref]
[ 0.194341] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.194348] pci 0000:00:01.0: bridge window [io disabled]
[ 0.194360] pci 0000:00:01.0: bridge window [mem 0xee000000-0xefdfffff]
[ 0.194371] pci 0000:00:01.0: bridge window [mem 0xeff00000-0xfbffffff pref]
[ 0.194400] pci 0000:00:01.0: setting latency timer to 64
[ 0.194411] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.194419] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.194428] pci_bus 0000:01: resource 1 [mem 0xee000000-0xefdfffff]
[ 0.194437] pci_bus 0000:01: resource 2 [mem 0xeff00000-0xfbffffff pref]
[ 0.194578] NET: Registered protocol family 2
[ 0.194760] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.195325] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.195746] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.196276] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.196285] TCP reno registered
[ 0.196303] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.196358] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.196787] NET: Registered protocol family 1
[ 0.196856] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.196869] pci 0000:00:04.0: Disabling VIA external APIC routing
[ 0.197105] Switched to NOHz mode on CPU #0
[ 0.197142] pci 0000:01:00.0: Boot video device
[ 0.197153] PCI: CLS 32 bytes, default 32
[ 0.197355] Simple Boot Flag at 0x3a set to 0x1
[ 0.198162] audit: initializing netlink socket (disabled)
[ 0.198198] type=2000 audit(1340704910.194:1): initialized
[ 0.254253] Trying to unpack rootfs image as initramfs...
[ 0.329213] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.341385] VFS: Disk quotas dquot_6.5.2
[ 0.341589] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.344268] fuse init (API version 7.16)
[ 0.344643] msgmni has been set to 965
[ 0.356596] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.356810] io scheduler noop registered
[ 0.356817] io scheduler deadline registered
[ 0.356901] io scheduler cfq registered (default)
[ 0.357326] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.357402] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.357788] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.357806] ACPI: Power Button [PWRB]
[ 0.357942] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.357952] ACPI: Power Button [PWRF]
[ 0.358010] ACPI: acpi_idle registered with cpuidle
[ 0.358095] Marking TSC unstable due to TSC halts in idle
[ 0.371496] ERST: Table is not found!
[ 0.376886] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.397759] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.397868] isapnp: Scanning for PnP cards...
[ 0.489610] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.576732] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.621900] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.689506] Linux agpgart interface v0.103
[ 0.689722] agpgart: Detected VIA Apollo Pro 133 chipset
[ 0.692001] agpgart-via 0000:00:00.0: AGP aperture is 32M @ 0xfc000000
[ 0.699960] brd: module loaded
[ 0.706734] loop: module loaded
[ 0.708650] Fixed MDIO Bus: probed
[ 0.708739] PPP generic driver version 2.4.2
[ 0.708941] tun: Universal TUN/TAP device driver, 1.6
[ 0.708947] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.709225] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.709895] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 0.709904] PCI: setting IRQ 9 as level-triggered
[ 0.709918] ehci_hcd 0000:00:0b.2: PCI INT C -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
[ 0.709957] ehci_hcd 0000:00:0b.2: EHCI Host Controller
[ 0.710089] ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 1
[ 0.772437] ehci_hcd 0000:00:0b.2: irq 9, io mem 0xeb800000
[ 0.868225] ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 1.00
[ 0.868772] hub 1-0:1.0: USB hub found
[ 0.868789] hub 1-0:1.0: 3 ports detected
[ 0.869034] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.869727] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 0.869737] PCI: setting IRQ 10 as level-triggered
[ 0.869750] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 0.869789] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 0.869986] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 0.870039] ohci_hcd 0000:00:0b.0: irq 10, io mem 0xec800000
[ 0.992690] hub 2-0:1.0: USB hub found
[ 0.992710] hub 2-0:1.0: 2 ports detected
[ 0.993414] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[ 0.993424] PCI: setting IRQ 5 as level-triggered
[ 0.993437] ohci_hcd 0000:00:0b.1: PCI INT B -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 0.993476] ohci_hcd 0000:00:0b.1: OHCI Host Controller
[ 0.993666] ohci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 3
[ 0.993722] ohci_hcd 0000:00:0b.1: irq 5, io mem 0xec000000
[ 1.044427] isapnp: No Plug & Play device found
[ 1.097151] hub 3-0:1.0: USB hub found
[ 1.097171] hub 3-0:1.0: 1 port detected
[ 1.097374] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.097583] uhci_hcd 0000:00:04.2: PCI INT D -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 1.097615] uhci_hcd 0000:00:04.2: UHCI Host Controller
[ 1.097782] uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 4
[ 1.097835] uhci_hcd 0000:00:04.2: irq 5, io base 0x0000d400
[ 1.098234] hub 4-0:1.0: USB hub found
[ 1.098249] hub 4-0:1.0: 2 ports detected
[ 1.098414] uhci_hcd 0000:00:04.3: PCI INT D -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 1.098433] uhci_hcd 0000:00:04.3: UHCI Host Controller
[ 1.098555] uhci_hcd 0000:00:04.3: new USB bus registered, assigned bus number 5
[ 1.098597] uhci_hcd 0000:00:04.3: irq 5, io base 0x0000d000
[ 1.098978] hub 5-0:1.0: USB hub found
[ 1.098992] hub 5-0:1.0: 2 ports detected
[ 1.099324] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.104820] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.104860] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.105421] mousedev: PS/2 mouse device common for all mice
[ 1.105863] rtc_cmos 00:05: RTC can wake from S4
[ 1.106111] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.106158] rtc0: alarms up to one year, 242 bytes nvram
[ 1.106603] device-mapper: uevent: version 1.0.3
[ 1.106858] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.106961] EISA: Probing bus 0 at eisa.0
[ 1.107023] EISA: Detected 0 cards.
[ 1.107051] cpufreq-nforce2: No nForce2 chipset.
[ 1.107135] cpuidle: using governor ladder
[ 1.107236] cpuidle: using governor menu
[ 1.107243] EFI Variables Facility v0.08 2004-May-17
[ 1.108164] TCP cubic registered
[ 1.108694] NET: Registered protocol family 10
[ 1.117853] NET: Registered protocol family 17
[ 1.117975] Registering the dns_resolver key type
[ 1.118043] Using IPI No-Shortcut mode
[ 1.118381] PM: Hibernation image not present or could not be loaded.
[ 1.118418] registered taskstats version 1
[ 1.132423] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.472172] usb 3-1: new full speed USB device number 2 using ohci_hcd
[ 1.715692] Freeing initrd memory: 13328k freed
[ 1.774858] Magic number: 0:973:22
[ 1.775081] rtc_cmos 00:05: setting system clock to 2012-06-26 10:01:52 UTC (1340704912)
[ 1.775134] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.775139] EDD information not available.
[ 1.775432] Freeing unused kernel memory: 696k freed
[ 1.777235] Write protecting the kernel text: 5344k
[ 1.777352] Write protecting the kernel read-only data: 2192k
[ 1.808309] usb 5-2: new full speed USB device number 2 using uhci_hcd
[ 1.845255] udevd[76]: starting version 173
[ 2.201234] Floppy drive(s): fd0 is 1.44M
[ 2.220145] FDC 0 is a post-1991 82077
[ 2.270251] pata_via 0000:00:04.1: version 0.3.4
[ 2.299387] scsi0 : pata_via
[ 2.304185] scsi1 : pata_via
[ 2.305106] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000008) is beyond end of object (20110413/exoparg2-418)
[ 2.305131] ACPI Error: Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0._GTM] (Node ddc22a08), AE_AML_PACKAGE_LIMIT (20110413/psparse-536)
[ 2.305165] ata1: ACPI get timing mode failed (AE 0x300b)
[ 2.305436] ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x0000000000000008) is beyond end of object (20110413/exoparg2-418)
[ 2.305456] ACPI Error: Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1._GTM] (Node ddc22af8), AE_AML_PACKAGE_LIMIT (20110413/psparse-536)
[ 2.305481] ata2: ACPI get timing mode failed (AE 0x300b)
[ 2.305491] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xd800 irq 14
[ 2.305499] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xd808 irq 15
[ 2.309895] tulip: Linux Tulip driver version 1.1.15 (Feb 27, 2007)
[ 2.310005] tulip 0000:00:09.0: PCI INT A -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
[ 2.310044] tulip: tulip_init_one: Enabled WOL support for AN983B
[ 2.310356] tulip0: MII transceiver #1 config 1000 status 7849 advertising 05e1
[ 2.358785] net eth0: ADMtek Comet rev 17 at Port 0xb400, 00:0c:f6:04:83:c6, IRQ 9
[ 2.468595] ata1.00: native sectors (78165359) is smaller than sectors (78165360)
[ 2.468612] ata1.00: ATA-4: ST340823A, 3.39, max UDMA/100
[ 2.468621] ata1.00: 78165360 sectors, multi 16: LBA
[ 2.476553] ata1.00: configured for UDMA/66
[ 2.476903] scsi 0:0:0:0: Direct-Access ATA ST340823A 3.39 PQ: 0 ANSI: 5
[ 2.477399] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.477843] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 2.478011] sd 0:0:0:0: [sda] Write Protect is off
[ 2.478021] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.478088] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.551778] sda: sda2 < sda5 sda6 sda7 >
[ 2.552995] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.648328] ata2.00: ATAPI: SONY CD-RW CRX0811, MYS2, max MWDMA2
[ 2.648347] ata2.01: ATAPI: LITEON DVD-ROM LTD122, IHN9, max UDMA/33
[ 2.664246] ata2.00: configured for MWDMA2
[ 2.680242] ata2.01: configured for UDMA/33
[ 2.682536] scsi 1:0:0:0: CD-ROM SONY CD-RW CRX0811 MYS2 PQ: 0 ANSI: 5
[ 2.685017] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 2.685029] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.685420] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.685630] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.687611] scsi 1:0:1:0: CD-ROM LITEON DVD-ROM LTD122 IHN9 PQ: 0 ANSI: 5
[ 2.691040] sr1: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
[ 2.691455] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 2.691683] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 3.410910] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 6.808134] uhci_hcd 0000:00:04.3: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
[ 16.920080] usb 5-2: device descriptor read/64, error -110
[ 24.723866] udevd[296]: starting version 175
[ 24.803885] Adding 514044k swap on /dev/sda7. Priority:-1 extents:1 across:514044k
[ 25.069197] lp: driver loaded but no devices found
[ 25.282587] parport_pc: VIA 686A/8231 detected
[ 25.282598] parport_pc: probing current configuration
[ 25.282623] parport_pc: Current parallel port base: 0x378
[ 25.282722] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 25.380504] lp0: using parport0 (interrupt-driven).
[ 25.380518] parport_pc: VIA parallel port: io=0x378, irq=7
[ 25.423735] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.609598] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 25.827740] wmi: Mapper loaded
[ 26.373342] type=1400 audit(1340704937.096:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=493 comm="apparmor_parser"
[ 26.374805] type=1400 audit(1340704937.096:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=493 comm="apparmor_parser"
[ 26.375622] type=1400 audit(1340704937.096:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=493 comm="apparmor_parser"
[ 26.435929] [drm] Initialized drm 1.1.0 20060810
[ 26.531861] via686a 0000:00:04.4: base address not set - upgrade BIOS or use force_addr=0xaddr
[ 26.557995] Modular ISDN core version 1.1.21
[ 26.574332] NET: Registered protocol family 34
[ 26.610234] psmouse serio1: ID: 10 00 64
[ 26.641107] mISDNipac module version 2.0
[ 26.837501] type=1400 audit(1340704937.560:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=495 comm="apparmor_parser"
[ 27.072962] AVM Fritz PCI driver Rev. 2.1
[ 27.073067] fcpci 0000:00:0a.0: PCI INT A -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 27.073076] mISDN: found adapter Fritz!Card PCI v2 at 0000:00:0a.0
[ 27.073095] AVM.1: AVM Fritz!CARD PCIv2 config irq:5 base:0xB000
[ 27.472198] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 27.475161] ppdev: user-space parallel port driver
...
[ 27.476474] NET: Registered protocol family 31
[ 27.704797] type=1400 audit(1340704938.428:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=620 comm="apparmor_parser"
[ 27.708323] type=1400 audit(1340704938.432:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=620 comm="apparmor_parser"
[ 28.034989] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 28.035001] PCI: setting IRQ 11 as level-triggered
[ 28.035017] nouveau 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 28.173804] ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded
[ 28.212857] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x015000a3)
[ 28.213161] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 28.248339] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 28.248737] [drm] nouveau 0000:01:00.0: BMP BIOS found
[ 28.248745] [drm] nouveau 0000:01:00.0: BMP version 5.17
[ 28.248753] [drm] nouveau 0000:01:00.0: Bios version 03.15.00.12
[ 28.248763] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 1.2
[ 28.248771] [drm] nouveau 0000:01:00.0: No useful information in BIOS output table; adding all possible outputs
[ 28.541758] [drm] nouveau 0000:01:00.0: Detected TV encoder: ch7006
[ 28.542304] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x07F6
[ 28.542329] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x0E6C
[ 28.542343] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0x0811
[ 28.542368] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0x0E13
[ 28.542383] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0x088E
[ 28.542392] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0x0980
[ 28.542420] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0x08B7
[ 28.820179] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 7 at offset 0x091B
[ 28.930787] init: failsafe main process (654) killed by TERM signal
[ 29.316863] HiSax: Linux Driver for passive ISDN cards
[ 29.316878] HiSax: Version 3.5 (module)
[ 29.316885] HiSax: Layer1 Revision 2.46.2.5
[ 29.316891] HiSax: Layer2 Revision 2.30.2.4
[ 29.316896] HiSax: TeiMgr Revision 2.20.2.3
[ 29.316901] HiSax: Layer3 Revision 2.22.2.3
[ 29.316907] HiSax: LinkLayer Revision 2.59.2.4
[ 29.380381] hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0
[ 29.393029] type=1400 audit(1340704940.116:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=743 comm="apparmor_parser"
[ 29.408495] type=1400 audit(1340704940.132:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=746 comm="apparmor_parser"
[ 29.412003] type=1400 audit(1340704940.132:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=746 comm="apparmor_parser"
[ 29.415906] type=1400 audit(1340704940.136:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=746 comm="apparmor_parser"
[ 29.460225] hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1
[ 29.460256] Error: Driver 'fcpci' is already registered, aborting...
[ 30.432651] ENS1371 0000:00:05.0: PCI INT A -> Link[LNKD] -> GSI 9 (level, low) -> IRQ 9
[ 30.812088] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
[ 30.812115] [drm] nouveau 0000:01:00.0: c: memory 332MHz core 199MHz
[ 30.816604] [TTM] Zone kernel: Available graphics memory: 254186 kiB.
[ 30.816612] [TTM] Initializing pool allocator.
[ 30.816648] [drm] nouveau 0000:01:00.0: Detected 32MiB VRAM
[ 30.817001] agpgart-via 0000:00:00.0: AGP 2.0 bridge
[ 30.817039] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[ 30.817112] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 30.817121] [drm] nouveau 0000:01:00.0: 32 MiB GART (aperture)
[ 30.821719] [drm] nouveau 0000:01:00.0: Detected TV encoder: ch7006
[ 31.017474] i2c-core: driver [ch7006] using legacy suspend method
[ 31.017484] i2c-core: driver [ch7006] using legacy resume method
[ 31.025040] ch7006 1-0075: Detected version ID: 50
[ 31.039211] init: alsa-restore main process (827) terminated with status 19
[ 31.151190] vboxdrv: Found 1 processor cores.
[ 31.157151] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 31.157162] vboxdrv: Successfully loaded version 4.1.12_Ubuntu (interface 0x00190000).
[ 31.384065] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 31.384080] [drm] No driver support for vblank timestamp query.
[ 31.388924] vboxpci: IOMMU not found (not registered)
[ 31.406030] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 31.406044] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 1)
[ 31.563463] [drm] nouveau 0000:01:00.0: Load detected on head A
[ 31.760671] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x44000, bo d2c87600
[ 31.771892] fbcon: nouveaufb (fb0) is primary device
[ 31.775764] Console: switching to colour frame buffer device 128x48
[ 31.775891] fb0: nouveaufb frame buffer device
[ 31.775897] drm: registered panic notifier
[ 31.775925] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 32.336450] init: lxdm main process (936) killed by TERM signal
[ 32.352147] usb 5-2: new full speed USB device number 3 using uhci_hcd
[ 32.932741] [drm] nouveau 0000:01:00.0: Load detected on head A
[ 33.171434] [drm] nouveau 0000:01:00.0: Load detected on head A
[ 33.960069] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 1)
[ 34.038590] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 34.038606] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[ 34.047801] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 1)
[ 36.130919] [drm] nouveau 0000:01:00.0: Load detected on head A
[ 38.976044] eth0: no IPv6 routers present
[ 43.431006] [drm] nouveau 0000:01:00.0: Load detected on head A
[ 45.175578] [drm] nouveau 0000:01:00.0: Load detected on head A
[ 45.511754] [drm] nouveau 0000:01:00.0: Load detected on head A
[ 45.930937] [drm] nouveau 0000:01:00.0: Load detected on head A
[ 46.230913] [drm] nouveau 0000:01:00.0: Load detected on head A
...
[ 405.439892] [drm] nouveau 0000:01:00.0: Load detected on head A
[ 1083.795047] [drm] nouveau 0000:01:00.0: Load detected on head A
Adv Reply
Bookmarks