Problem with monitor

**doobydave** · May 23rd, 2012

Output of lspci -nnk | grep -iA3 vga (standard boot)

Code:

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G80 [GeForce 8800 GTX] [10de:0191] (rev a2)
	Subsystem: eVga.com. Corp. Device [3842:c831]
	Kernel driver in use: nouveau
	Kernel modules: nouveau, nvidiafb
03:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller [197b:2368]

and booted with nomodeset

Code:

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G80 [GeForce 8800 GTX] [10de:0191] (rev a2)
	Subsystem: eVga.com. Corp. Device [3842:c831]
	Kernel modules: nouveau, nvidiafb
03:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller [197b:2368]
	Subsystem: Giga-byte Technology Device [1458:b000]

Dunno where the extra line has appeared from..

I forgot to mention I have a laptop with a VGA port on it, I could use that to interrogate the monitor without the DVI>VGA adapter (though thinking back to my first ubuntu experience, the monitor was connected directly to an ATI graphics card, and I remember there being similar issues).

**matt_symes** · May 24th, 2012

Hi

I forgot to mention I have a laptop with a VGA port on it, I could use that to interrogate the monitor without the DVI>VGA adapter (though thinking back to my first ubuntu experience, the monitor was connected directly to an ATI graphics card, and I remember there being similar issues).

Do that and try to pull of the edid information over VGA using if possible. It will implicate/eliminate the dvi->vga connector.

Code:

sudo get-edit > monitor.edid

If you can get the edid information via the vga connector, we may be able to use that on your other machine.

Transfer it to your other machine and then we can try to create an xorg file.

Post back any error messages from the laptop machine.

Kind regards

**doobydave** · May 24th, 2012

Good news - I'm posting from my laptop booted with the 1204 live cd, with the CRT plugged into the VGA - with two desktops and a visible terminal
Bad news - The unity task bar (on the left) utterly failed to materialise making posting this message harder than it ought. After remembering the keyboard shortcut to bring up the terminal in X, firefox fires up, albeit with errors.

Code:

ubuntu@ubuntu:~$ firefox
nvfx_screen_get_param:95 -  Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 -  Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 -  Warning: unknown PIPE_CAP 55
nvfx_screen_get_param:95 -  Warning: unknown PIPE_CAP 56
nvfx_screen_get_param:95 -  Warning: unknown PIPE_CAP 59
nvfx_screen_get_param:95 -  Warning: unknown PIPE_CAP 58
nvfx_screen_get_param:95 -  Warning: unknown PIPE_CAP 30

Xorg.0.log

Code:

[   112.395] 
X.Org X Server 1.11.3
Release Date: 2011-12-16
[   112.395] X Protocol Version 11, Revision 0
[   112.395] Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
[   112.395] Current Operating System: Linux ubuntu 3.2.0-23-generic-pae #36-Ubuntu SMP Tue Apr 10 22:19:09 UTC 2012 i686
[   112.395] Kernel command line: file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash --
[   112.395] Build Date: 04 April 2012  11:58:38PM
[   112.395] xorg-server 2:1.11.4-0ubuntu10 (For technical support please see http://www.ubuntu.com/support) 
[   112.395] Current version of pixman: 0.24.4
[   112.395] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   112.395] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   112.395] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 24 13:42:30 2012
[   112.414] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   112.793] (==) No Layout section.  Using the first Screen section.
[   112.793] (==) No screen section available. Using defaults.
[   112.793] (**) |-->Screen "Default Screen Section" (0)
[   112.793] (**) |   |-->Monitor "<default monitor>"
[   112.793] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   112.793] (==) Automatically adding devices
[   112.793] (==) Automatically enabling devices
[   113.667] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   113.667] 	Entry deleted from font path.
[   113.667] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   113.667] 	Entry deleted from font path.
[   113.667] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   113.667] 	Entry deleted from font path.
[   114.338] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   114.338] 	Entry deleted from font path.
[   114.338] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   114.338] 	Entry deleted from font path.
[   114.339] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[   114.339] 	Entry deleted from font path.
[   114.339] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/Type1,
	built-ins
[   114.339] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[   114.339] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   114.339] (II) Loader magic: 0xb77215a0
[   114.339] (II) Module ABI versions:
[   114.339] 	X.Org ANSI C Emulation: 0.4
[   114.339] 	X.Org Video Driver: 11.0
[   114.339] 	X.Org XInput driver : 16.0
[   114.339] 	X.Org Server Extension : 6.0
[   114.340] (--) PCI:*(0:1:0:0) 10de:0398:1025:0090 rev 161, Mem @ 0xd1000000/16777216, 0xc0000000/268435456, 0xd0000000/16777216, I/O @ 0x00002000/128
[   114.340] (II) Open ACPI successful (/var/run/acpid.socket)
[   114.340] (II) LoadModule: "extmod"
[   114.343] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[   114.488] (II) Module extmod: vendor="X.Org Foundation"
[   114.488] 	compiled for 1.11.3, module version = 1.0.0
[   114.488] 	Module class: X.Org Server Extension
[   114.488] 	ABI class: X.Org Server Extension, version 6.0
[   114.488] (II) Loading extension MIT-SCREEN-SAVER
[   114.488] (II) Loading extension XFree86-VidModeExtension
[   114.488] (II) Loading extension XFree86-DGA
[   114.488] (II) Loading extension DPMS
[   114.488] (II) Loading extension XVideo
[   114.488] (II) Loading extension XVideo-MotionCompensation
[   114.488] (II) Loading extension X-Resource
[   114.488] (II) LoadModule: "dbe"
[   114.489] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[   114.548] (II) Module dbe: vendor="X.Org Foundation"
[   114.548] 	compiled for 1.11.3, module version = 1.0.0
[   114.548] 	Module class: X.Org Server Extension
[   114.548] 	ABI class: X.Org Server Extension, version 6.0
[   114.548] (II) Loading extension DOUBLE-BUFFER
[   114.548] (II) LoadModule: "glx"
[   114.549] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   114.709] (II) Module glx: vendor="X.Org Foundation"
[   114.709] 	compiled for 1.11.3, module version = 1.0.0
[   114.709] 	ABI class: X.Org Server Extension, version 6.0
[   114.711] (==) AIGLX enabled
[   114.711] (II) Loading extension GLX
[   114.711] (II) LoadModule: "record"
[   114.711] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[   114.718] (II) Module record: vendor="X.Org Foundation"
[   114.718] 	compiled for 1.11.3, module version = 1.13.0
[   114.718] 	Module class: X.Org Server Extension
[   114.718] 	ABI class: X.Org Server Extension, version 6.0
[   114.718] (II) Loading extension RECORD
[   114.718] (II) LoadModule: "dri"
[   114.718] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   114.885] (II) Module dri: vendor="X.Org Foundation"
[   114.885] 	compiled for 1.11.3, module version = 1.0.0
[   114.885] 	ABI class: X.Org Server Extension, version 6.0
[   114.885] (II) Loading extension XFree86-DRI
[   114.885] (II) LoadModule: "dri2"
[   114.886] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[   114.886] (II) Module dri2: vendor="X.Org Foundation"
[   114.886] 	compiled for 1.11.3, module version = 1.2.0
[   114.886] 	ABI class: X.Org Server Extension, version 6.0
[   114.886] (II) Loading extension DRI2
[   114.886] (==) Matched nvidia as autoconfigured driver 0
[   114.886] (==) Matched nouveau as autoconfigured driver 1
[   114.886] (==) Matched nv as autoconfigured driver 2
[   114.886] (==) Matched vesa as autoconfigured driver 3
[   114.886] (==) Matched fbdev as autoconfigured driver 4
[   114.886] (==) Assigned the driver to the xf86ConfigLayout
[   114.886] (II) LoadModule: "nvidia"
[   114.887] (WW) Warning, couldn't open module nvidia
[   114.887] (II) UnloadModule: "nvidia"
[   114.887] (II) Unloading nvidia
[   114.887] (EE) Failed to load module "nvidia" (module does not exist, 0)
[   114.887] (II) LoadModule: "nouveau"
[   114.887] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[   115.224] (II) Module nouveau: vendor="X.Org Foundation"
[   115.224] 	compiled for 1.11.3, module version = 0.0.16
[   115.224] 	Module class: X.Org Video Driver
[   115.224] 	ABI class: X.Org Video Driver, version 11.0
[   115.224] (II) LoadModule: "nv"
[   115.226] (WW) Warning, couldn't open module nv
[   115.226] (II) UnloadModule: "nv"
[   115.226] (II) Unloading nv
[   115.226] (EE) Failed to load module "nv" (module does not exist, 0)
[   115.226] (II) LoadModule: "vesa"
[   115.226] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   115.228] (II) Module vesa: vendor="X.Org Foundation"
[   115.228] 	compiled for 1.11.3, module version = 2.3.0
[   115.228] 	Module class: X.Org Video Driver
[   115.228] 	ABI class: X.Org Video Driver, version 11.0
[   115.228] (II) LoadModule: "fbdev"
[   115.228] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   115.232] (II) Module fbdev: vendor="X.Org Foundation"
[   115.232] 	compiled for 1.11.3, module version = 0.4.2
[   115.232] 	ABI class: X.Org Video Driver, version 11.0
[   115.232] (==) Matched nvidia as autoconfigured driver 0
[   115.232] (==) Matched nouveau as autoconfigured driver 1
[   115.233] (==) Matched nv as autoconfigured driver 2
[   115.233] (==) Matched vesa as autoconfigured driver 3
[   115.233] (==) Matched fbdev as autoconfigured driver 4
[   115.233] (==) Assigned the driver to the xf86ConfigLayout
[   115.233] (II) LoadModule: "nvidia"
[   115.233] (WW) Warning, couldn't open module nvidia
[   115.233] (II) UnloadModule: "nvidia"
[   115.233] (II) Unloading nvidia
[   115.233] (EE) Failed to load module "nvidia" (module does not exist, 0)
[   115.233] (II) LoadModule: "nouveau"
[   115.234] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[   115.234] (II) Module nouveau: vendor="X.Org Foundation"
[   115.234] 	compiled for 1.11.3, module version = 0.0.16
[   115.234] 	Module class: X.Org Video Driver
[   115.234] 	ABI class: X.Org Video Driver, version 11.0
[   115.234] (II) UnloadModule: "nouveau"
[   115.234] (II) Unloading nouveau
[   115.234] (II) Failed to load module "nouveau" (already loaded, 0)
[   115.234] (II) LoadModule: "nv"
[   115.234] (WW) Warning, couldn't open module nv
[   115.234] (II) UnloadModule: "nv"
[   115.234] (II) Unloading nv
[   115.235] (EE) Failed to load module "nv" (module does not exist, 0)
[   115.235] (II) LoadModule: "vesa"
[   115.235] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   115.235] (II) Module vesa: vendor="X.Org Foundation"
[   115.235] 	compiled for 1.11.3, module version = 2.3.0
[   115.235] 	Module class: X.Org Video Driver
[   115.235] 	ABI class: X.Org Video Driver, version 11.0
[   115.235] (II) UnloadModule: "vesa"
[   115.235] (II) Unloading vesa
[   115.235] (II) Failed to load module "vesa" (already loaded, 0)
[   115.235] (II) LoadModule: "fbdev"
[   115.235] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   115.235] (II) Module fbdev: vendor="X.Org Foundation"
[   115.235] 	compiled for 1.11.3, module version = 0.4.2
[   115.235] 	ABI class: X.Org Video Driver, version 11.0
[   115.235] (II) UnloadModule: "fbdev"
[   115.235] (II) Unloading fbdev
[   115.235] (II) Failed to load module "fbdev" (already loaded, 0)
[   115.235] (II) NOUVEAU driver Date:   Wed Nov 30 18:56:54 2011 +0100
[   115.235] (II) NOUVEAU driver for NVIDIA chipset families :
[   115.235] 	RIVA TNT        (NV04)
[   115.235] 	RIVA TNT2       (NV05)
[   115.235] 	GeForce 256     (NV10)
[   115.235] 	GeForce 2       (NV11, NV15)
[   115.235] 	GeForce 4MX     (NV17, NV18)
[   115.235] 	GeForce 3       (NV20)
[   115.235] 	GeForce 4Ti     (NV25, NV28)
[   115.235] 	GeForce FX      (NV3x)
[   115.235] 	GeForce 6       (NV4x)
[   115.235] 	GeForce 7       (G7x)
[   115.235] 	GeForce 8       (G8x)
[   115.235] 	GeForce GTX 200 (NVA0)
[   115.235] 	GeForce GTX 400 (NVC0)
[   115.235] (II) VESA: driver for VESA chipsets: vesa
[   115.235] (II) FBDEV: driver for framebuffer: fbdev
[   115.235] (++) using VT number 7

[   115.236] drmOpenDevice: node name is /dev/dri/card0
[   115.236] drmOpenDevice: open result is 8, (OK)
[   115.236] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[   115.236] drmOpenDevice: node name is /dev/dri/card0
[   115.236] drmOpenDevice: open result is 8, (OK)
[   115.236] drmOpenByBusid: drmOpenMinor returns 8
[   115.236] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[   115.236] (II) [drm] nouveau interface version: 0.0.16
[   115.236] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[   115.236] (WW) Falling back to old probe method for vesa
[   115.236] (WW) Falling back to old probe method for fbdev
[   115.236] (II) Loading sub module "fbdevhw"
[   115.236] (II) LoadModule: "fbdevhw"
[   115.236] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   115.462] (II) Module fbdevhw: vendor="X.Org Foundation"
[   115.462] 	compiled for 1.11.3, module version = 0.0.2
[   115.462] 	ABI class: X.Org Video Driver, version 11.0
[   115.463] (II) Loading sub module "dri"
[   115.463] (II) LoadModule: "dri"
[   115.463] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[   115.463] (II) Module dri: vendor="X.Org Foundation"
[   115.463] 	compiled for 1.11.3, module version = 1.0.0
[   115.463] 	ABI class: X.Org Server Extension, version 6.0
[   115.463] (II) NOUVEAU(0): Loaded DRI module
[   115.463] drmOpenDevice: node name is /dev/dri/card0
[   115.463] drmOpenDevice: open result is 9, (OK)
[   115.463] drmOpenDevice: node name is /dev/dri/card0
[   115.463] drmOpenDevice: open result is 9, (OK)
[   115.463] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[   115.463] drmOpenDevice: node name is /dev/dri/card0
[   115.463] drmOpenDevice: open result is 9, (OK)
[   115.463] drmOpenByBusid: drmOpenMinor returns 9
[   115.463] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[   115.463] (II) [drm] DRM interface version 1.4
[   115.463] (II) [drm] DRM open master succeeded.
[   115.463] (--) NOUVEAU(0): Chipset: "NVIDIA NV4b"
[   115.463] (II) NOUVEAU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   115.463] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[   115.463] (==) NOUVEAU(0): RGB weight 888
[   115.463] (==) NOUVEAU(0): Default visual is TrueColor
[   115.463] (==) NOUVEAU(0): Using HW cursor
[   115.463] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[   115.463] (==) NOUVEAU(0): Page flipping enabled
[   115.708] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[   115.840] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[   115.896] (II) NOUVEAU(0): Output TV-1 has no monitor section
[   115.906] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[   116.190] (II) NOUVEAU(0): EDID for output VGA-1
[   116.190] (II) NOUVEAU(0): Manufacturer: IVM  Model: 2140  Serial#: 10037195
[   116.190] (II) NOUVEAU(0): Year: 2000  Week: 5
[   116.190] (II) NOUVEAU(0): EDID Version: 1.1
[   116.190] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[   116.190] (II) NOUVEAU(0): Sync:  Separate  Composite  SyncOnGreen
[   116.190] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 40  vert.: 30
[   116.190] (II) NOUVEAU(0): Gamma: 2.54
[   116.190] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[   116.190] (II) NOUVEAU(0): redX: 0.625 redY: 0.340   greenX: 0.292 greenY: 0.604
[   116.190] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.070   whiteX: 0.283 whiteY: 0.297
[   116.190] (II) NOUVEAU(0): Supported established timings:
[   116.190] (II) NOUVEAU(0): 640x480@60Hz
[   116.190] (II) NOUVEAU(0): 640x480@67Hz
[   116.190] (II) NOUVEAU(0): 640x480@72Hz
[   116.190] (II) NOUVEAU(0): 640x480@75Hz
[   116.190] (II) NOUVEAU(0): 800x600@56Hz
[   116.190] (II) NOUVEAU(0): 800x600@60Hz
[   116.190] (II) NOUVEAU(0): 800x600@72Hz
[   116.190] (II) NOUVEAU(0): 800x600@75Hz
[   116.190] (II) NOUVEAU(0): 832x624@75Hz
[   116.190] (II) NOUVEAU(0): 1024x768@60Hz
[   116.190] (II) NOUVEAU(0): 1024x768@70Hz
[   116.190] (II) NOUVEAU(0): 1024x768@75Hz
[   116.190] (II) NOUVEAU(0): 1280x1024@75Hz
[   116.190] (II) NOUVEAU(0): 1152x864@75Hz
[   116.190] (II) NOUVEAU(0): Manufacturer's mask: 0
[   116.190] (II) NOUVEAU(0): Supported standard timings:
[   116.190] (II) NOUVEAU(0): #0: hsize: 1600  vsize 1200  refresh: 97  vid: 26025
[   116.190] (II) NOUVEAU(0): #1: hsize: 1792  vsize 1344  refresh: 75  vid: 20417
[   116.190] (II) NOUVEAU(0): #2: hsize: 1856  vsize 1392  refresh: 75  vid: 20425
[   116.190] (II) NOUVEAU(0): #3: hsize: 2048  vsize 1536  refresh: 80  vid: 21729
[   116.190] (II) NOUVEAU(0):  
[   116.190] (II) NOUVEAU(0):  
[   116.190] (II) NOUVEAU(0):  
[   116.190] (II) NOUVEAU(0):  
[   116.190] (II) NOUVEAU(0): EDID (in hex):
[   116.190] (II) NOUVEAU(0): 	00ffffffffffff0026cd4021cb279900
[   116.190] (II) NOUVEAU(0): 	050a01010e281e9ae80e88a0574a9a26
[   116.190] (II) NOUVEAU(0): 	12484c3fef80a965c14fc94fe1540101
[   116.190] (II) NOUVEAU(0): 	010101010101000000fe000000000000
[   116.190] (II) NOUVEAU(0): 	0000000000000000000000fe00000000
[   116.190] (II) NOUVEAU(0): 	00000000000000000000000000fe0000
[   116.190] (II) NOUVEAU(0): 	000000000000000000000000000000fe
[   116.190] (II) NOUVEAU(0): 	000000000000000000000000000000ea
[   116.190] (II) NOUVEAU(0): EDID vendor "IVM", prod id 8512
[   116.190] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   116.190] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "1792x1344"x0.0  261.00  1792 1888 2104 2456  1344 1345 1348 1417 -hsync +vsync (106.3 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "1856x1392"x0.0  288.00  1856 1984 2208 2560  1392 1393 1396 1500 -hsync +vsync (112.5 kHz)
[   116.190] (II) NOUVEAU(0): Printing probed modes for output VGA-1
[   116.190] (II) NOUVEAU(0): Modeline "1856x1392"x75.0  288.00  1856 1984 2208 2560  1392 1395 1399 1500 -hsync +vsync (112.5 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "1792x1344"x75.0  261.00  1792 1888 2104 2456  1344 1345 1348 1417 -hsync +vsync (106.3 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
[   116.190] (II) NOUVEAU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
[   116.191] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[   116.191] (II) NOUVEAU(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
[   116.191] (II) NOUVEAU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
[   116.191] (II) NOUVEAU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
[   116.191] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[   116.191] (II) NOUVEAU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[   116.191] (II) NOUVEAU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
[   116.191] (II) NOUVEAU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
[   116.191] (II) NOUVEAU(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
[   116.191] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[   116.324] (II) NOUVEAU(0): EDID for output LVDS-1
[   116.324] (II) NOUVEAU(0): Manufacturer: CMO  Model: 1554  Serial#: 0
[   116.324] (II) NOUVEAU(0): Year: 2007  Week: 40
[   116.324] (II) NOUVEAU(0): EDID Version: 1.3
[   116.324] (II) NOUVEAU(0): Digital Display Input
[   116.324] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 33  vert.: 21
[   116.324] (II) NOUVEAU(0): Gamma: 2.20
[   116.324] (II) NOUVEAU(0): No DPMS capabilities specified
[   116.324] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[   116.324] (II) NOUVEAU(0): First detailed timing is preferred mode
[   116.324] (II) NOUVEAU(0): redX: 0.602 redY: 0.340   greenX: 0.306 greenY: 0.530
[   116.324] (II) NOUVEAU(0): blueX: 0.151 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[   116.324] (II) NOUVEAU(0): Manufacturer's mask: 0
[   116.324] (II) NOUVEAU(0): Supported detailed timing:
[   116.324] (II) NOUVEAU(0): clock: 71.0 MHz   Image Size:  331 x 207 mm
[   116.324] (II) NOUVEAU(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1440 h_border: 0
[   116.324] (II) NOUVEAU(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 823 v_border: 0
[   116.324] (II) NOUVEAU(0):  N154I3-L03
[   116.324] (II) NOUVEAU(0):  CMO
[   116.324] (II) NOUVEAU(0):  N154I3-L03
[   116.324] (II) NOUVEAU(0): EDID (in hex):
[   116.324] (II) NOUVEAU(0): 	00ffffffffffff000daf541500000000
[   116.324] (II) NOUVEAU(0): 	28110103802115780a07f59a574e8726
[   116.324] (II) NOUVEAU(0): 	1e505400000001010101010101010101
[   116.324] (II) NOUVEAU(0): 	010101010101bc1b00a0502017303020
[   116.324] (II) NOUVEAU(0): 	36004bcf10000018000000fe004e3135
[   116.324] (II) NOUVEAU(0): 	3449332d4c30330a2020000000fe0043
[   116.324] (II) NOUVEAU(0): 	4d4f0a202020202020202020000000fe
[   116.324] (II) NOUVEAU(0): 	004e31353449332d4c30330a202000a5
[   116.324] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[   116.324] (II) NOUVEAU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[   116.324] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[   116.324] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[   116.324] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[   116.324] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz)
[   116.324] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz)
[   116.324] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz)
[   116.380] (II) NOUVEAU(0): EDID for output TV-1
[   116.397] (II) NOUVEAU(0): EDID for output DVI-D-1
[   116.397] (II) NOUVEAU(0): Output VGA-1 connected
[   116.397] (II) NOUVEAU(0): Output LVDS-1 connected
[   116.397] (II) NOUVEAU(0): Output TV-1 disconnected
[   116.397] (II) NOUVEAU(0): Output DVI-D-1 disconnected
[   116.397] (II) NOUVEAU(0): Using fuzzy aspect match for initial modes
[   116.397] (II) NOUVEAU(0): Output VGA-1 using initial mode 1024x768
[   116.397] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1024x768
[   116.397] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   116.397] (--) NOUVEAU(0): Virtual size is 1024x768 (pitch 0)
[   116.397] (**) NOUVEAU(0):  Driver mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[   116.397] (II) NOUVEAU(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
[   116.397] (**) NOUVEAU(0):  Driver mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[   116.397] (II) NOUVEAU(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
[   116.397] (**) NOUVEAU(0):  Driver mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[   116.397] (II) NOUVEAU(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
[   116.397] (**) NOUVEAU(0):  Driver mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[   116.397] (II) NOUVEAU(0): Modeline "720x400"x59.6   22.25  720 744 808 896  400 403 413 417 -hsync +vsync (24.8 kHz)
[   116.397] (**) NOUVEAU(0):  Driver mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[   116.397] (II) NOUVEAU(0): Modeline "640x400"x60.0   20.00  640 664 720 800  400 403 409 417 -hsync +vsync (25.0 kHz)
[   116.397] (**) NOUVEAU(0):  Driver mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[   116.397] (II) NOUVEAU(0): Modeline "640x350"x59.8   17.50  640 664 720 800  350 353 363 366 -hsync +vsync (21.9 kHz)
[   116.397] (**) NOUVEAU(0):  Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
[   116.397] (II) NOUVEAU(0): Modeline "1280x800"x59.9   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[   116.397] (**) NOUVEAU(0): Display dimensions: (400, 300) mm
[   116.397] (**) NOUVEAU(0): DPI set to (65, 65)
[   116.397] (II) Loading sub module "fb"
[   116.397] (II) LoadModule: "fb"
[   116.398] (II) Loading /usr/lib/xorg/modules/libfb.so
[   116.404] (II) Module fb: vendor="X.Org Foundation"
[   116.404] 	compiled for 1.11.3, module version = 1.0.0
[   116.404] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   116.404] (II) Loading sub module "exa"
[   116.404] (II) LoadModule: "exa"
[   116.404] (II) Loading /usr/lib/xorg/modules/libexa.so
[   116.406] (II) Module exa: vendor="X.Org Foundation"
[   116.406] 	compiled for 1.11.3, module version = 2.5.0
[   116.406] 	ABI class: X.Org Video Driver, version 11.0
[   116.406] (II) Loading sub module "shadowfb"
[   116.406] (II) LoadModule: "shadowfb"
[   116.406] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[   116.412] (II) Module shadowfb: vendor="X.Org Foundation"
[   116.412] 	compiled for 1.11.3, module version = 1.0.0
[   116.412] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   116.412] (II) UnloadModule: "vesa"
[   116.412] (II) Unloading vesa
[   116.412] (II) UnloadModule: "fbdev"
[   116.412] (II) Unloading fbdev
[   116.412] (II) UnloadModule: "fbdevhw"
[   116.412] (II) Unloading fbdevhw
[   116.412] (--) Depth 24 pixmap format is 32 bpp
[   116.415] (II) NOUVEAU(0): Opened GPU channel 1
[   116.415] (II) NOUVEAU(0): [DRI2] Setup complete
[   116.415] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[   116.415] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[   116.424] (II) NOUVEAU(0): GART: 512MiB available
[   116.446] (II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
[   116.464] (II) EXA(0): Driver allocated offscreen pixmaps
[   116.464] (II) EXA(0): Driver registered support for the following operations:
[   116.464] (II)         Solid
[   116.464] (II)         Copy
[   116.464] (II)         Composite (RENDER acceleration)
[   116.464] (II)         UploadToScreen
[   116.464] (II)         DownloadFromScreen
[   116.464] (==) NOUVEAU(0): Backing store disabled
[   116.464] (==) NOUVEAU(0): Silken mouse enabled
[   116.464] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[   116.465] (II) NOUVEAU(0): [XvMC] Extension initialized.
[   116.465] (==) NOUVEAU(0): DPMS enabled
[   116.465] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   116.465] (--) RandR disabled
[   116.465] (II) Initializing built-in extension Generic Event Extension
[   116.465] (II) Initializing built-in extension SHAPE
[   116.465] (II) Initializing built-in extension MIT-SHM
[   116.465] (II) Initializing built-in extension XInputExtension
[   116.465] (II) Initializing built-in extension XTEST
[   116.465] (II) Initializing built-in extension BIG-REQUESTS
[   116.465] (II) Initializing built-in extension SYNC
[   116.465] (II) Initializing built-in extension XKEYBOARD
[   116.465] (II) Initializing built-in extension XC-MISC
[   116.465] (II) Initializing built-in extension SECURITY
[   116.465] (II) Initializing built-in extension XINERAMA
[   116.465] (II) Initializing built-in extension XFIXES
[   116.465] (II) Initializing built-in extension RENDER
[   116.465] (II) Initializing built-in extension RANDR
[   116.465] (II) Initializing built-in extension COMPOSITE
[   116.465] (II) Initializing built-in extension DAMAGE
[   122.075] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   122.075] (II) AIGLX: enabled GLX_INTEL_swap_event
[   122.075] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   122.075] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   122.075] (II) AIGLX: Loaded and initialized nouveau
[   122.075] (II) GLX: Initialized DRI2 GL provider for screen 0
[   122.078] (II) NOUVEAU(0): NVEnterVT is called.
[   122.527] (II) NOUVEAU(0): Setting screen physical size to 270 x 203
[   122.527] resize called 1024 768
[   123.092] (II) XKB: generating xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[   124.165] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[   124.165] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   124.165] (II) LoadModule: "evdev"
[   124.165] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   124.169] (II) Module evdev: vendor="X.Org Foundation"
[   124.169] 	compiled for 1.11.3, module version = 2.7.0
[   124.169] 	Module class: X.Org XInput Driver
[   124.169] 	ABI class: X.Org XInput driver, version 16.0
[   124.169] (II) Using input driver 'evdev' for 'Power Button'
[   124.169] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   124.169] (**) Power Button: always reports core events
[   124.169] (**) evdev: Power Button: Device: "/dev/input/event3"
[   124.169] (--) evdev: Power Button: Vendor 0 Product 0x1
[   124.169] (--) evdev: Power Button: Found keys
[   124.169] (II) evdev: Power Button: Configuring as keyboard
[   124.169] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[   124.169] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   124.169] (**) Option "xkb_rules" "evdev"
[   124.169] (**) Option "xkb_model" "pc105"
[   124.169] (**) Option "xkb_layout" "us"
[   124.170] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[   124.170] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   124.170] (II) Using input driver 'evdev' for 'Video Bus'
[   124.170] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   124.170] (**) Video Bus: always reports core events
[   124.170] (**) evdev: Video Bus: Device: "/dev/input/event5"
[   124.170] (--) evdev: Video Bus: Vendor 0 Product 0x6
[   124.170] (--) evdev: Video Bus: Found keys
[   124.170] (II) evdev: Video Bus: Configuring as keyboard
[   124.170] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5/event5"
[   124.170] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   124.170] (**) Option "xkb_rules" "evdev"
[   124.170] (**) Option "xkb_model" "pc105"
[   124.170] (**) Option "xkb_layout" "us"
[   124.171] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   124.171] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   124.171] (II) Using input driver 'evdev' for 'Power Button'
[   124.171] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   124.171] (**) Power Button: always reports core events
[   124.171] (**) evdev: Power Button: Device: "/dev/input/event2"
[   124.171] (--) evdev: Power Button: Vendor 0 Product 0x1
[   124.171] (--) evdev: Power Button: Found keys
[   124.171] (II) evdev: Power Button: Configuring as keyboard
[   124.171] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[   124.171] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   124.171] (**) Option "xkb_rules" "evdev"
[   124.171] (**) Option "xkb_model" "pc105"
[   124.171] (**) Option "xkb_layout" "us"
[   124.172] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[   124.172] (II) No input driver specified, ignoring this device.
[   124.172] (II) This device may have been added with another device file.
[   124.172] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[   124.172] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   124.172] (II) Using input driver 'evdev' for 'Sleep Button'
[   124.172] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   124.172] (**) Sleep Button: always reports core events
[   124.172] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[   124.172] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   124.172] (--) evdev: Sleep Button: Found keys
[   124.172] (II) evdev: Sleep Button: Configuring as keyboard
[   124.172] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[   124.172] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   124.172] (**) Option "xkb_rules" "evdev"
[   124.172] (**) Option "xkb_model" "pc105"
[   124.172] (**) Option "xkb_layout" "us"
[   124.173] (II) config/udev: Adding input device ORTEK Smartpad Keyboard (/dev/input/event6)
[   124.173] (**) ORTEK Smartpad Keyboard: Applying InputClass "evdev keyboard catchall"
[   124.173] (II) Using input driver 'evdev' for 'ORTEK Smartpad Keyboard'
[   124.173] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   124.173] (**) ORTEK Smartpad Keyboard: always reports core events
[   124.173] (**) evdev: ORTEK Smartpad Keyboard: Device: "/dev/input/event6"
[   124.173] (--) evdev: ORTEK Smartpad Keyboard: Vendor 0x5a4 Product 0x2000
[   124.173] (--) evdev: ORTEK Smartpad Keyboard: Found keys
[   124.173] (II) evdev: ORTEK Smartpad Keyboard: Configuring as keyboard
[   124.173] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input6/event6"
[   124.173] (II) XINPUT: Adding extended input device "ORTEK Smartpad Keyboard" (type: KEYBOARD, id 10)
[   124.173] (**) Option "xkb_rules" "evdev"
[   124.173] (**) Option "xkb_model" "pc105"
[   124.173] (**) Option "xkb_layout" "us"
[   124.174] (II) config/udev: Adding input device ORTEK Smartpad Keyboard (/dev/input/event7)
[   124.174] (**) ORTEK Smartpad Keyboard: Applying InputClass "evdev pointer catchall"
[   124.174] (**) ORTEK Smartpad Keyboard: Applying InputClass "evdev keyboard catchall"
[   124.174] (II) Using input driver 'evdev' for 'ORTEK Smartpad Keyboard'
[   124.174] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   124.174] (**) ORTEK Smartpad Keyboard: always reports core events
[   124.174] (**) evdev: ORTEK Smartpad Keyboard: Device: "/dev/input/event7"
[   124.174] (--) evdev: ORTEK Smartpad Keyboard: Vendor 0x5a4 Product 0x2000
[   124.174] (--) evdev: ORTEK Smartpad Keyboard: Found 9 mouse buttons
[   124.174] (--) evdev: ORTEK Smartpad Keyboard: Found scroll wheel(s)
[   124.174] (--) evdev: ORTEK Smartpad Keyboard: Found relative axes
[   124.174] (--) evdev: ORTEK Smartpad Keyboard: Found x and y relative axes
[   124.174] (--) evdev: ORTEK Smartpad Keyboard: Found absolute axes
[   124.174] (II) evdev: ORTEK Smartpad Keyboard: Forcing absolute x/y axes to exist.
[   124.174] (--) evdev: ORTEK Smartpad Keyboard: Found keys
[   124.174] (II) evdev: ORTEK Smartpad Keyboard: Configuring as mouse
[   124.174] (II) evdev: ORTEK Smartpad Keyboard: Configuring as keyboard
[   124.174] (II) evdev: ORTEK Smartpad Keyboard: Adding scrollwheel support
[   124.174] (**) evdev: ORTEK Smartpad Keyboard: YAxisMapping: buttons 4 and 5
[   124.174] (**) evdev: ORTEK Smartpad Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   124.174] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input7/event7"
[   124.174] (II) XINPUT: Adding extended input device "ORTEK Smartpad Keyboard" (type: KEYBOARD, id 11)
[   124.174] (**) Option "xkb_rules" "evdev"
[   124.174] (**) Option "xkb_model" "pc105"
[   124.174] (**) Option "xkb_layout" "us"
[   124.175] (II) evdev: ORTEK Smartpad Keyboard: initialized for relative axes.
[   124.175] (WW) evdev: ORTEK Smartpad Keyboard: ignoring absolute axes.
[   124.175] (**) ORTEK Smartpad Keyboard: (accel) keeping acceleration scheme 1
[   124.175] (**) ORTEK Smartpad Keyboard: (accel) acceleration profile 0
[   124.175] (**) ORTEK Smartpad Keyboard: (accel) acceleration factor: 2.000
[   124.175] (**) ORTEK Smartpad Keyboard: (accel) acceleration threshold: 4
[   124.175] (II) config/udev: Adding input device ORTEK Smartpad Keyboard (/dev/input/mouse0)
[   124.175] (II) No input driver specified, ignoring this device.
[   124.175] (II) This device may have been added with another device file.
[   124.176] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[   124.176] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   124.176] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[   124.176] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   124.176] (**) AT Translated Set 2 keyboard: always reports core events
[   124.176] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[   124.176] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[   124.176] (--) evdev: AT Translated Set 2 keyboard: Found keys
[   124.176] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[   124.176] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[   124.176] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[   124.176] (**) Option "xkb_rules" "evdev"
[   124.176] (**) Option "xkb_model" "pc105"
[   124.176] (**) Option "xkb_layout" "us"
[   124.176] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[   124.176] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[   124.176] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[   124.176] (II) LoadModule: "synaptics"
[   124.177] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   124.178] (II) Module synaptics: vendor="X.Org Foundation"
[   124.178] 	compiled for 1.11.3, module version = 1.5.99
[   124.178] 	Module class: X.Org XInput Driver
[   124.178] 	ABI class: X.Org XInput driver, version 16.0
[   124.178] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[   124.178] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   124.178] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   124.178] (**) Option "Device" "/dev/input/event8"
[   124.204] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[   124.204] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[   124.204] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[   124.204] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[   124.204] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple scroll-buttons
[   124.204] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[   124.204] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   124.204] (**) SynPS/2 Synaptics TouchPad: always reports core events
[   124.248] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event8"
[   124.248] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[   124.248] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[   124.248] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[   124.248] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
[   124.248] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[   124.248] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[   124.248] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[   124.248] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[   124.248] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[   124.248] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[   124.248] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[   135.073] (II) NOUVEAU(0): EDID vendor "CMO", prod id 5460
[   135.073] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   135.073] (II) NOUVEAU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[   163.122] (II) NOUVEAU(0): EDID vendor "CMO", prod id 5460
[   163.123] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   163.123] (II) NOUVEAU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[   177.147] (II) NOUVEAU(0): EDID vendor "CMO", prod id 5460
[   177.147] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   177.147] (II) NOUVEAU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[   181.647] (II) NOUVEAU(0): EDID vendor "CMO", prod id 5460
[   181.647] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   181.647] (II) NOUVEAU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[   201.759] (II) XKB: generating xkmfile /var/lib/xkb/server-03AF3717FF3AB439A4BAABA686CCB40771CDF520.xkm
[   501.888] (II) AIGLX: Suspending AIGLX clients for VT switch
[   501.888] (II) NOUVEAU(0): NVLeaveVT is called.
[  1220.411] (II) Open ACPI successful (/var/run/acpid.socket)
[  1220.411] (II) AIGLX: Resuming AIGLX clients after VT switch
[  1220.411] (II) NOUVEAU(0): NVEnterVT is called.
[  1221.071] (II) NOUVEAU(0): EDID vendor "CMO", prod id 5460
[  1221.071] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[  1221.071] (II) NOUVEAU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[  1221.145] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1235.960] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1235.960] (II) NOUVEAU(0): NVLeaveVT is called.
[  1859.830] (II) Open ACPI successful (/var/run/acpid.socket)
[  1859.830] (II) AIGLX: Resuming AIGLX clients after VT switch
[  1859.830] (II) NOUVEAU(0): NVEnterVT is called.
[  1860.489] (II) NOUVEAU(0): EDID vendor "CMO", prod id 5460
[  1860.489] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[  1860.489] (II) NOUVEAU(0): Modeline "1280x800"x0.0   71.00  1280 1328 1360 1440  800 803 809 823 -hsync -vsync (49.3 kHz)
[  1860.565] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found

I wasn't able to run the command you asked. I wasn't able to install read-edid for some reason. I'm guessing this is why I got nothing. I did assume there was a typo (edit>edid), but it didn't work either way.

Code:

ubuntu@ubuntu:~$ sudo apt-get install read-edid
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package read-edid

**doobydave** · May 25th, 2012

I have ubuntu 10.04 installed on the laptop and it appears read-edid is already intalled. Running the command you asked gave -

Code:

~$ sudo get-edid > monitor.edid
get-edid: get-edid version 2.0.0

	Performing real mode VBE call
	Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
	Function supported
	Call successful

	VBE version 300
	VBE string at 0x11100 "NVIDIA"

VBE/DDC service about to be called
	Report DDC capabilities

	Performing real mode VBE call
	Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
	Function supported
	Call successful

	Monitor and video card combination does not support DDC1 transfers
	Monitor and video card combination supports DDC2 transfers
	0 seconds per 128 byte EDID block transfer
	Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
	Read EDID

	Performing real mode VBE call
	Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
	Function supported
	Call successful

**matt_symes** · May 25th, 2012

Hi

Dave. Have a look in the file monitor.edid on your laptop.

It should contain some unreadable characters.

Check this out from my laptop.

Code:

% sudo get-edid > monitor.edid
[sudo] password for matthew: 
get-edid: get-edid version 2.0.0

        Performing real mode VBE call
        Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
        Function supported
        Call successful

        VBE version 300
        VBE string at 0xc01d0 "ATI ATOMBIOS"

VBE/DDC service about to be called
        Report DDC capabilities

        Performing real mode VBE call
        Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
        Function supported
        Call successful

        Monitor and video card combination does not support DDC1 transfers
        Monitor and video card combination supports DDC2 transfers
        0 seconds per 128 byte EDID block transfer
        Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
        Read EDID

        Performing real mode VBE call
        Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
        Function supported
        Call successful

matthew@matthew-Aspire-7540 ~/my_storage/linux-3.4.0-3.7
 % cat monitor.edid 
������0���&x
��XP�&PT/&@�`�000#~��LGDisplay
�LP173WD1-TLA1x%                                                                                                                                                            matthew@matthew-Aspire-7540 ~/my_storage/linux-3.4.0-3.7
 %

The file monitor should contain (in binary which is why it looks like gobbledygook) your monitor edid information.

You should be able to take that file and move it over to your other machine and plug that file into your xorg.conf file.

I think we may have to create an xorg.conf for you though.

It looks like it may be the DVI->VGA connector that is causing you problems.

Kind regards

**doobydave** · May 25th, 2012

Ok, so I have the file -

Code:

$ cat monitor.edid 
������&�@!�'�
(���WJ�&HL?e�O�O�T����

Just to let you know, I am using the proprietary nvidia driver on my laptop, which (up until six weeks ago) didn't noticebly suffer from these issues.

**matt_symes** · May 25th, 2012

Hi

Let's see if that makes any difference.

Copy the monitor.edid file onto a pen drive stick.

Boot into you problem PC, press ALT + F2 and type

Code:

gksudo nautilus

Enter your password. Move the monitor.edid file to the folder /etc/X11 and then close nautilus.

Press CTRL + ALT + F1 together to bring up a console.

Stop X running by stopping the display manager. Type

Code:

sudo service lightdm stop

If you still using gdm type

Code:

sudo service gdm stop

Make a backup of your existing xorg.conf file (if you have one)

Code:

sudo cp /etc/X11/xorg.conf{,bk}

Create a new xorg.conf file for your nvidia card.

Code:

sudo nvidia-xconfig --custom-edid=/etc/X11/monitor.edid

Check the xorg.conf file (Post it back into your next thread anyway)

Code:

cat /etc/X11/xorg.conf

You'll be looking for a line that says

Code:

Option	"CustomEDID" "DVI-I-1:/etc/X11/monitor.edid"

Reboot your computer normally by typing

Code:

sudo reboot

How does that get on ?

Kind regards

**doobydave** · May 25th, 2012

Is that method valid for the open-source drivers?

**matt_symes** · May 25th, 2012

Hi

Ahh. Your using nouveau on the problem PC.

Sorry i misread the post where you said you used nvidia on the laptop and thought that was the problem PC ('tis been a long couple of days here).

I'm not sure if the nouveau driver allows a custom EDID file to be used.

Is there any reason you cannot use the nvidia driver ?

Kind regards

**doobydave** · May 25th, 2012

I don't blame you for the confusion, and thanks again for your time.

Like I said, I'm loathe to install the nvidia driver and call it a solution - despite ultimately probably wanting to use it. I will do so however if you think it will help with understanding the issue.

What makes you think the issue is the adapter? Looking through the Xorg.0.log from the 12.04 live cd boot on the laptop shows it loading and unloading several drivers, like the box using the adapter.

I read somewhere about forcing the VESA driver to use a certain resolution from GRUB - I tried one or two values, but they didn't really help (they did alter the behaviour, however)

Booting up to two desktops, neither of which have the unity bar on is not normal. If you like, I can repeat this to double check if the monitor is responsible for this omission (I can almost guarantee it is). I should also have mentioned that the display on the crt was the correct aspect ratio, but the display on the laptop was stretched.

Thread: Problem with monitor

Thread Tools

Display

Re: Ubuntu (and others) hate my monitor

Re: Ubuntu (and others) hate my monitor

Re: Ubuntu (and others) hate my monitor

Re: Ubuntu (and others) hate my monitor

Re: Problem with monitor

Re: Problem with monitor

Re: Problem with monitor

Re: Problem with monitor

Re: Problem with monitor

Re: Problem with monitor

Bookmarks

Bookmarks

Posting Permissions