Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: ATI Radeon HD3450 Video card dangerous?

  1. #1
    Join Date
    Jan 2012
    Beans
    248

    ATI Radeon HD3450 Video card dangerous?

    Hi All

    I want to download and install the Fglrx driver for my ATI RADEON HD3450 graphics card. I am running 11.10.

    I downloaded the ATI Driver, filename: amd-driver-installer-12-3-x86.x86_64.run, all 108 Mb of it, and would like to install it. I went to the wiki page:

    http://wiki.cchtml.com/index.php/Ubu...allation_Guide

    and was reading down, when I came upon this warning:

    NOTE: If you enter your card information on AMD/ATI's driver page, it will offer you the Catalyst 9-3 driver to download. However, the Catalyst 9-3 driver doesn't support X servers past 1.5, and it will not work with Oneiric (or anything later than Lucid/10,04)! !!!SO BE CAREFUL!!! If you tried to install Catalyst on a system with one of these cards, see the 'Removing the Driver' section to restore the default/pre-installed drivers.
    How do I know which X-Server I am running? Should I install the driver?

    Please let me know.
    Glenn.

  2. #2
    Join Date
    Jun 2007
    Beans
    12,678

    Re: ATI Radeon HD3450 Video card dangerous?

    The warning refers to the cards listed in that section and is irrelevant to your 3450.

  3. #3
    Join Date
    Jan 2012
    Beans
    248

    Re: ATI Radeon HD3450 Video card dangerous?

    Ok, I installed the fglrx driver from the AMD website:
    http://wiki.cchtml.com/index.php/Ubu...allation_Guide

    Bear In mind I was running off the motherboard graphics chip whilst installing the driver.

    The install seemed to be successful, i now have AMD Catalyst control center application in menu.
    I shutdown the machine, put the ATI Radeon HD3450 card in, booted the machine and it locked up before it loaded the login screen.

    How do I diagnose what aspect of the video card is making the system sieze?

    I Ran XOrg Diagnose and the following error messages were generated:

    fglrx(0): atiddxDriScreenInit failed, GPS not been initialized.
    fglrx(0): XMM failed to open CMMQS connection. (EE) fglrx(0):
    fglrx(0): XMM failed to initialize

    Glenn.
    Last edited by Senior_Buckethead; April 22nd, 2012 at 03:19 AM. Reason: Adding more information

  4. #4
    Join Date
    Jan 2012
    Beans
    248

    Re: ATI Radeon HD3450 Video card dangerous?

    From the ATI Oneiric webpage:
    http://wiki.cchtml.com/index.php/Ubu...allation_Guide

    Test your installation:
    NOTE: if you don't reboot first, fglrxinfo gives an error message. Reboot the computer and type: fglrxinfo
    Code:
    glenn@acer:~$ fglrxinfo
    X Error of failed request:  BadRequest (invalid request code or no such operation)
    Major opcode of failed request:  139 (ATIFGLEXTENSION)
    Minor opcode of failed request:  66 ()
    Serial number of failed request:  13
    Current serial number in output stream:  13
    glenn@acer:~$
    Can anyone help?

  5. #5
    Join Date
    Jun 2007
    Beans
    12,678

    Re: ATI Radeon HD3450 Video card dangerous?

    Pastebin your /var/log/Xorg.0.log

  6. #6
    Join Date
    Jan 2012
    Beans
    248

    Re: ATI Radeon HD3450 Video card dangerous?

    Here you go

    Code:
    [    13.243] 
    X.Org X Server 1.10.4
    Release Date: 2011-08-19
    [    13.243] X Protocol Version 11, Revision 0
    [    13.243] Build Operating System: Linux 2.6.24-29-server i686 Ubuntu
    [    13.243] Current Operating System: Linux acer 3.0.0-19-generic #33-Ubuntu SMP Thu Apr 19 19:05:57 UTC 2012 i686
    [    13.243] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-19-generic root=UUID=2f247f57-afa1-43e1-8660-e9f6eea50fbf ro quiet splash vt.handoff=7
    [    13.243] Build Date: 19 October 2011  05:09:41AM
    [    13.243] xorg-server 2:1.10.4-1ubuntu4.2 (For technical support please see http://www.ubuntu.com/support) 
    [    13.243] Current version of pixman: 0.22.2
    [    13.243]     Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
    [    13.243] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [    13.244] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 22 14:06:02 2012
    [    13.244] (==) Using config file: "/etc/X11/xorg.conf"
    [    13.244] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [    13.244] (==) ServerLayout "aticonfig Layout"
    [    13.244] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [    13.244] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
    [    13.244] (**) |   |-->Device "aticonfig-Device[0]-0"
    [    13.244] (==) Automatically adding devices
    [    13.244] (==) Automatically enabling devices
    [    13.245] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    [    13.245]     Entry deleted from font path.
    [    13.245] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
    [    13.245]     Entry deleted from font path.
    [    13.245] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
    [    13.245]     Entry deleted from font path.
    [    13.245] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
    [    13.245]     Entry deleted from font path.
    [    13.245] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
    [    13.245]     Entry deleted from font path.
    [    13.245] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/Type1,
        /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
        built-ins
    [    13.245] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
    [    13.245] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
    [    13.245] (II) Loader magic: 0x823ada0
    [    13.245] (II) Module ABI versions:
    [    13.245]     X.Org ANSI C Emulation: 0.4
    [    13.245]     X.Org Video Driver: 10.0
    [    13.245]     X.Org XInput driver : 12.3
    [    13.245]     X.Org Server Extension : 5.0
    [    13.246] (--) PCI:*(0:1:5:0) 1002:9610:1025:014e rev 0, Mem @ 0xd0000000/268435456, 0xfe8f0000/65536, 0xfe700000/1048576, I/O @ 0x0000c000/256
    [    13.246] (II) Open ACPI successful (/var/run/acpid.socket)
    [    13.246] (II) "extmod" will be loaded by default.
    [    13.246] (II) "dbe" will be loaded by default.
    [    13.246] (II) "glx" will be loaded by default.
    [    13.246] (II) "record" will be loaded by default.
    [    13.246] (II) "dri" will be loaded by default.
    [    13.246] (II) "dri2" will be loaded by default.
    [    13.246] (II) LoadModule: "extmod"
    [    13.260] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [    13.260] (II) Module extmod: vendor="X.Org Foundation"
    [    13.260]     compiled for 1.10.4, module version = 1.0.0
    [    13.260]     Module class: X.Org Server Extension
    [    13.261]     ABI class: X.Org Server Extension, version 5.0
    [    13.261] (II) Loading extension MIT-SCREEN-SAVER
    [    13.261] (II) Loading extension XFree86-VidModeExtension
    [    13.261] (II) Loading extension XFree86-DGA
    [    13.261] (II) Loading extension DPMS
    [    13.261] (II) Loading extension XVideo
    [    13.261] (II) Loading extension XVideo-MotionCompensation
    [    13.261] (II) Loading extension X-Resource
    [    13.261] (II) LoadModule: "dbe"
    [    13.261] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [    13.261] (II) Module dbe: vendor="X.Org Foundation"
    [    13.261]     compiled for 1.10.4, module version = 1.0.0
    [    13.261]     Module class: X.Org Server Extension
    [    13.261]     ABI class: X.Org Server Extension, version 5.0
    [    13.261] (II) Loading extension DOUBLE-BUFFER
    [    13.261] (II) LoadModule: "glx"
    [    13.261] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/modules/extensions/libglx.so
    [    13.261] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [    13.261]     compiled for 6.9.0, module version = 1.0.0
    [    13.262] (II) Loading extension GLX
    [    13.262] (II) LoadModule: "record"
    [    13.262] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [    13.262] (II) Module record: vendor="X.Org Foundation"
    [    13.262]     compiled for 1.10.4, module version = 1.13.0
    [    13.262]     Module class: X.Org Server Extension
    [    13.262]     ABI class: X.Org Server Extension, version 5.0
    [    13.262] (II) Loading extension RECORD
    [    13.262] (II) LoadModule: "dri"
    [    13.263] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [    13.263] (II) Module dri: vendor="X.Org Foundation"
    [    13.263]     compiled for 1.10.4, module version = 1.0.0
    [    13.263]     ABI class: X.Org Server Extension, version 5.0
    [    13.263] (II) Loading extension XFree86-DRI
    [    13.263] (II) LoadModule: "dri2"
    [    13.263] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [    13.263] (II) Module dri2: vendor="X.Org Foundation"
    [    13.263]     compiled for 1.10.4, module version = 1.2.0
    [    13.263]     ABI class: X.Org Server Extension, version 5.0
    [    13.263] (II) Loading extension DRI2
    [    13.263] (II) LoadModule: "fglrx"
    [    13.263] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so
    [    13.285] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    [    13.285]     compiled for 1.4.99.906, module version = 8.95.3
    [    13.285]     Module class: X.Org Video Driver
    [    13.286] (II) Loading sub module "fglrxdrm"
    [    13.286] (II) LoadModule: "fglrxdrm"
    [    13.286] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
    [    13.286] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [    13.286]     compiled for 1.4.99.906, module version = 8.95.3
    [    13.286] (II) ATI Proprietary Linux Driver Version Identifier:8.95.3
    [    13.286] (II) ATI Proprietary Linux Driver Release Identifier: 8.951                                
    [    13.286] (II) ATI Proprietary Linux Driver Build Date: Mar  8 2012 23:06:36
    [    13.286] (++) using VT number 7
    
    [    13.286] (WW) Falling back to old probe method for fglrx
    [    13.300] (II) Loading PCS database from /etc/ati/amdpcsdb
    [    13.302] (--) Chipset Supported AMD Graphics Processor (0x9610) found
    [    13.302] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
    [    13.302] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
    [    13.302] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
    [    13.302] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
    [    13.302] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
    [    13.302] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
    [    13.302] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
    [    13.302] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
    [    13.302] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
    [    13.302] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
    [    13.302] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
    [    13.302] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
    [    13.302] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
    [    13.302] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:5:1) found
    [    13.302] (II) AMD Video driver is running on a device belonging to a group targeted for this release
    [    13.302] (II) AMD Video driver is signed
    [    13.302] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/modules/drivers/fglrx_drv.so
    [    13.302] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
    [    13.302] (II) fglrx(0): pEnt->device->identifier=0xa00af10
    [    13.302] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
    [    13.303] (II) Loading sub module "vgahw"
    [    13.303] (II) LoadModule: "vgahw"
    [    13.303] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [    13.303] (II) Module vgahw: vendor="X.Org Foundation"
    [    13.303]     compiled for 1.10.4, module version = 0.1.0
    [    13.303]     ABI class: X.Org Video Driver, version 10.0
    [    13.303] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [    13.303] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [    13.303] (==) fglrx(0): Default visual is TrueColor
    [    13.303] (**) fglrx(0): Option "DPMS" "true"
    [    13.303] (==) fglrx(0): RGB weight 888
    [    13.304] (II) fglrx(0): Using 8 bits per RGB 
    [    13.304] (==) fglrx(0): Buffer Tiling is ON
    [    13.304] (II) Loading sub module "fglrxdrm"
    [    13.304] (II) LoadModule: "fglrxdrm"
    [    13.304] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/modules/linux/libfglrxdrm.so
    [    13.304] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    [    13.304]     compiled for 1.4.99.906, module version = 8.95.3
    [    13.306] ukiDynamicMajor: failed to open /proc/ati/major
    [    13.306] ukiDynamicMajor: failed to open /proc/ati/major
    [    13.306] (**) fglrx(0): NoAccel = NO
    [    13.306] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
    [    13.306] (--) fglrx(0): Chipset: "ATI Radeon HD 3200 Graphics" (Chipset = 0x9610)
    [    13.306] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x014e)
    [    13.306] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
    [    13.306] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
    [    13.306] (--) fglrx(0): MMIO registers at 0xfe8f0000
    [    13.306] (--) fglrx(0): I/O port at 0x0000c000
    [    13.306] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [    13.315] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    [    13.316] (II) Loading sub module "vbe"
    [    13.316] (II) LoadModule: "vbe"
    [    13.317] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [    13.317] (II) Module vbe: vendor="X.Org Foundation"
    [    13.317]     compiled for 1.10.4, module version = 1.1.0
    [    13.317]     ABI class: X.Org Video Driver, version 10.0
    [    13.317] (II) fglrx(0): VESA BIOS detected
    [    13.317] (II) fglrx(0): VESA VBE Version 3.0
    [    13.317] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    [    13.317] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
    [    13.317] (II) fglrx(0): VESA VBE OEM Software Rev: 10.73
    [    13.317] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc. 
    [    13.317] (II) fglrx(0): VESA VBE OEM Product: RS780
    [    13.317] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    [    13.326] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
    [    13.327] (--) fglrx(0): Video RAM: 262144 kByte, Type: DDR2
    [    13.327] (II) fglrx(0): PCIE card detected
    [    13.327] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
    [    13.327] (WW) fglrx(0): board is an unknown third party board, chipset is supported
    [    13.327] (WW) fglrx(0): Hasn't establisted DRM connection
    [    13.327] (II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
    [    13.327] (WW) fglrx(0): No DRM connection for driver fglrx.
    [    13.327] (II) fglrx(0): RandR 1.2 support is enabled!
    [    13.327] (II) fglrx(0): RandR 1.2 rotation support is enabled!
    [    13.327] (==) fglrx(0): Center Mode is disabled 
    [    13.327] (II) Loading sub module "fb"
    [    13.327] (II) LoadModule: "fb"
    [    13.327] (II) Loading /usr/lib/xorg/modules/libfb.so
    [    13.327] (II) Module fb: vendor="X.Org Foundation"
    [    13.327]     compiled for 1.10.4, module version = 1.0.0
    [    13.327]     ABI class: X.Org ANSI C Emulation, version 0.4
    [    13.327] (II) Loading sub module "ddc"
    [    13.327] (II) LoadModule: "ddc"
    [    13.327] (II) Module "ddc" already built-in
    [    13.787] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
    [    13.787] (II) fglrx(0): Output CRT1 has no monitor section
    [    13.787] (II) Loading sub module "ddc"
    [    13.787] (II) LoadModule: "ddc"
    [    13.787] (II) Module "ddc" already built-in
    [    13.787] (II) fglrx(0): Connected Display0: CRT1
    [    13.787] (II) fglrx(0): Display0 EDID data ---------------------------
    [    13.787] (II) fglrx(0): Manufacturer: SAN  Model: 52d  Serial#: 21389
    [    13.787] (II) fglrx(0): Year: 2007  Week: 1
    [    13.787] (II) fglrx(0): EDID Version: 1.3
    [    13.787] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
    [    13.787] (II) fglrx(0): Sync:  Separate
    [    13.787] (II) fglrx(0): Max Image Size [cm]: horiz.: 30  vert.: 23
    [    13.787] (II) fglrx(0): Gamma: 2.37
    [    13.787] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [    13.787] (II) fglrx(0): First detailed timing not preferred mode in violation of standard!
    [    13.787] (II) fglrx(0): redX: 0.634 redY: 0.339   greenX: 0.285 greenY: 0.587
    [    13.787] (II) fglrx(0): blueX: 0.144 blueY: 0.075   whiteX: 0.310 whiteY: 0.330
    [    13.787] (II) fglrx(0): Supported established timings:
    [    13.787] (II) fglrx(0): 640x480@60Hz
    [    13.787] (II) fglrx(0): 640x480@72Hz
    [    13.787] (II) fglrx(0): 640x480@75Hz
    [    13.787] (II) fglrx(0): 800x600@56Hz
    [    13.787] (II) fglrx(0): 1024x768@60Hz
    [    13.787] (II) fglrx(0): Manufacturer's mask: 0
    [    13.787] (II) fglrx(0): Supported standard timings:
    [    13.787] (II) fglrx(0): #0: hsize: 1600  vsize 1200  refresh: 61  vid: 16809
    [    13.787] (II) fglrx(0): Supported detailed timing:
    [    13.787] (II) fglrx(0): clock: 78.8 MHz   Image Size:  304 x 228 mm
    [    13.788] (II) fglrx(0): h_active: 1024  h_sync: 1040  h_sync_end 1136 h_blank_end 1312 h_border: 0
    [    13.788] (II) fglrx(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 800 v_border: 0
    [    13.788] (II) fglrx(0): Serial No: 0132544821389
    [    13.788] (II) fglrx(0): Monitor name: SANCY
    [    13.788] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 60 kHz, PixClock max 85 MHz
    [    13.788] (II) fglrx(0): EDID (in hex):
    [    13.788] (II) fglrx(0):     00ffffffffffff004c2e2d058d530000
    [    13.788] (II) fglrx(0):     01110103081e1789e871d6a256499624
    [    13.788] (II) fglrx(0):     134f542e0800a9410101010101010101
    [    13.788] (II) fglrx(0):     010101010101c31e0020410020301060
    [    13.788] (II) fglrx(0):     130030e410000018000000ff00303133
    [    13.788] (II) fglrx(0):     32353434383231333839000000fc0053
    [    13.788] (II) fglrx(0):     414e43590a20202020202020000000fd
    [    13.788] (II) fglrx(0):     00324b1e3c08000a2020202020200094
    [    13.788] (II) fglrx(0): End of Display0 EDID data --------------------
    [    13.823] (II) fglrx(0): EDID for output DFP1
    [    13.823] (II) fglrx(0): EDID for output CRT1
    [    13.823] (II) fglrx(0): Manufacturer: SAN  Model: 52d  Serial#: 21389
    [    13.823] (II) fglrx(0): Year: 2007  Week: 1
    [    13.823] (II) fglrx(0): EDID Version: 1.3
    [    13.823] (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
    [    13.823] (II) fglrx(0): Sync:  Separate
    [    13.823] (II) fglrx(0): Max Image Size [cm]: horiz.: 30  vert.: 23
    [    13.823] (II) fglrx(0): Gamma: 2.37
    [    13.823] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [    13.823] (II) fglrx(0): First detailed timing not preferred mode in violation of standard!
    [    13.823] (II) fglrx(0): redX: 0.634 redY: 0.339   greenX: 0.285 greenY: 0.587
    [    13.823] (II) fglrx(0): blueX: 0.144 blueY: 0.075   whiteX: 0.310 whiteY: 0.330
    [    13.823] (II) fglrx(0): Supported established timings:
    [    13.823] (II) fglrx(0): 640x480@60Hz
    [    13.823] (II) fglrx(0): 640x480@72Hz
    [    13.823] (II) fglrx(0): 640x480@75Hz
    [    13.823] (II) fglrx(0): 800x600@56Hz
    [    13.823] (II) fglrx(0): 1024x768@60Hz
    [    13.823] (II) fglrx(0): Manufacturer's mask: 0
    [    13.823] (II) fglrx(0): Supported standard timings:
    [    13.823] (II) fglrx(0): #0: hsize: 1600  vsize 1200  refresh: 61  vid: 16809
    [    13.823] (II) fglrx(0): Supported detailed timing:
    [    13.823] (II) fglrx(0): clock: 78.8 MHz   Image Size:  304 x 228 mm
    [    13.823] (II) fglrx(0): h_active: 1024  h_sync: 1040  h_sync_end 1136 h_blank_end 1312 h_border: 0
    [    13.823] (II) fglrx(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 800 v_border: 0
    [    13.823] (II) fglrx(0): Serial No: 0132544821389
    [    13.823] (II) fglrx(0): Monitor name: SANCY
    [    13.823] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 60 kHz, PixClock max 85 MHz
    [    13.823] (II) fglrx(0): EDID (in hex):
    [    13.823] (II) fglrx(0):     00ffffffffffff004c2e2d058d530000
    [    13.823] (II) fglrx(0):     01110103081e1789e871d6a256499624
    [    13.823] (II) fglrx(0):     134f542e0800a9410101010101010101
    [    13.823] (II) fglrx(0):     010101010101c31e0020410020301060
    [    13.823] (II) fglrx(0):     130030e410000018000000ff00303133
    [    13.823] (II) fglrx(0):     32353434383231333839000000fc0053
    [    13.823] (II) fglrx(0):     414e43590a20202020202020000000fd
    [    13.823] (II) fglrx(0):     00324b1e3c08000a2020202020200094
    [    13.823] (II) fglrx(0): Printing probed modes for output CRT1
    [    13.823] (II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
    [    13.823] (II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 -hsync -vsync (46.9 kHz)
    [    13.823] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
    [    13.823] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 -hsync -vsync (37.9 kHz)
    [    13.823] (II) fglrx(0): Modeline "800x600"x56.0   36.00  800 824 896 1024  600 601 603 625 -hsync -vsync (35.2 kHz)
    [    13.823] (II) fglrx(0): Modeline "720x480"x60.0   26.71  720 736 808 896  480 481 484 497 +hsync -vsync (29.8 kHz)
    [    13.823] (II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 +hsync +vsync (37.5 kHz)
    [    13.823] (II) fglrx(0): Modeline "640x480"x72.0   31.50  640 656 696 832  480 481 484 520 +hsync +vsync (37.9 kHz)
    [    13.823] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 648 744 800  480 482 484 525 +hsync +vsync (31.5 kHz)
    [    13.823] (II) fglrx(0): Output DFP1 disconnected
    [    13.823] (II) fglrx(0): Output CRT1 connected
    [    13.823] (II) fglrx(0): Using exact sizes for initial modes
    [    13.823] (II) fglrx(0): Output CRT1 using initial mode 1024x768
    [    13.823] (II) fglrx(0): DPI set to (96, 96)
    [    13.824] (II) fglrx(0): Adapter ATI Radeon HD 3200 Graphics has 2 configurable heads and 1 displays connected.
    [    13.824] (==) fglrx(0):  PseudoColor visuals disabled
    [    13.824] (II) Loading sub module "ramdac"
    [    13.824] (II) LoadModule: "ramdac"
    [    13.824] (II) Module "ramdac" already built-in
    [    13.824] (==) fglrx(0): NoDRI = NO
    [    13.824] (==) fglrx(0): Capabilities: 0x00000000
    [    13.824] (==) fglrx(0): CapabilitiesEx: 0x00000000
    [    13.824] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    [    13.824] (==) fglrx(0): UseFastTLS=0
    [    13.824] (==) fglrx(0): BlockSignalsOnLock=1
    [    13.824] (--) Depth 24 pixmap format is 32 bpp
    [    13.825] (EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized. 
    [    13.825] (WW) fglrx(0): ***********************************************************
    [    13.825] (WW) fglrx(0): * DRI initialization failed                               *
    [    13.825] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible *
    [    13.825] (WW) fglrx(0): * 2D and 3D acceleration disabled                         *
    [    13.825] (WW) fglrx(0): ***********************************************************
    [    13.825] (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x10000000
    [    13.850] (II) fglrx(0): FBMM initialized for area (0,0)-(1024,8191)
    [    13.850] (II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,1024) (front color buffer - assumption)
    [    13.850] (II) fglrx(0): Largest offscreen area available: 1024 x 7167
    [    13.850] (==) fglrx(0): Backing store disabled
    [    13.850] (II) Loading extension FGLRXEXTENSION
    [    13.850] (**) fglrx(0): DPMS enabled
    [    13.851] (II) fglrx(0): Initialized in-driver Xinerama extension
    [    13.851] (WW) fglrx(0): Textured Video not supported without DRI enabled.
    [    13.851] (II) LoadModule: "glesx"
    [    13.851] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/modules/glesx.so
    [    13.853] (II) Module glesx: vendor="X.Org Foundation"
    [    13.853]     compiled for 1.4.99.906, module version = 1.0.0
    [    13.853] (II) Loading extension GLESX
    [    13.853] (II) fglrx(0): GLESX enableFlags = 512
    [    13.853] (II) LoadModule: "amdxmm"
    [    13.853] (II) Loading /usr/lib/i386-linux-gnu/xorg/extra-modules/modules/amdxmm.so
    [    13.853] (II) Module amdxmm: vendor="X.Org Foundation"
    [    13.853]     compiled for 1.4.99.906, module version = 2.0.0
    [    13.853] (EE) fglrx(0): XMM failed to open CMMQS connection.(EE) fglrx(0): 
    [    13.853] (EE) fglrx(0): XMM failed to initialize
    [    13.853] (WW) fglrx(0): No XV video playback available
    [    13.853] (II) fglrx(0): Enable composite support successfully
    [    13.853] (WW) fglrx(0): Option "VendorName" is not used
    [    13.853] (WW) fglrx(0): Option "ModelName" is not used
    [    13.853] (==) fglrx(0): Silken mouse enabled
    [    13.854] (==) fglrx(0): Using HW cursor of display infrastructure!
    [    13.854] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
    [    13.928] (--) RandR disabled
    [    13.928] (II) Initializing built-in extension Generic Event Extension
    [    13.928] (II) Initializing built-in extension SHAPE
    [    13.928] (II) Initializing built-in extension MIT-SHM
    [    13.928] (II) Initializing built-in extension XInputExtension
    [    13.928] (II) Initializing built-in extension XTEST
    [    13.928] (II) Initializing built-in extension BIG-REQUESTS
    [    13.928] (II) Initializing built-in extension SYNC
    [    13.928] (II) Initializing built-in extension XKEYBOARD
    [    13.928] (II) Initializing built-in extension XC-MISC
    [    13.928] (II) Initializing built-in extension SECURITY
    [    13.928] (II) Initializing built-in extension XINERAMA
    [    13.928] (II) Initializing built-in extension XFIXES
    [    13.928] (II) Initializing built-in extension RENDER
    [    13.928] (II) Initializing built-in extension RANDR
    [    13.928] (II) Initializing built-in extension COMPOSITE
    [    13.928] (II) Initializing built-in extension DAMAGE
    [    13.928] (II) Initializing built-in extension GESTURE
    [    13.931] (II) AIGLX: Screen 0 is not DRI capable
    [    13.932] [glesx] __glESXExtensionInit: No GL ES2.0 capable screen found!
    [    13.938] (II) fglrx(0): Setting screen physical size to 270 x 203
    [    13.961] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
    [    13.971] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [    13.971] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    13.971] (II) LoadModule: "evdev"
    [    13.971] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    13.972] (II) Module evdev: vendor="X.Org Foundation"
    [    13.972]     compiled for 1.10.2, module version = 2.6.0
    [    13.972]     Module class: X.Org XInput Driver
    [    13.972]     ABI class: X.Org XInput driver, version 12.3
    [    13.973] (II) Using input driver 'evdev' for 'Power Button'
    [    13.973] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    13.973] (**) Power Button: always reports core events
    [    13.973] (**) Power Button: Device: "/dev/input/event1"
    [    13.973] (--) Power Button: Found keys
    [    13.973] (II) Power Button: Configuring as keyboard
    [    13.973] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [    13.973] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [    13.973] (**) Option "xkb_rules" "evdev"
    [    13.973] (**) Option "xkb_model" "pc105"
    [    13.973] (**) Option "xkb_layout" "us"
    [    13.975] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [    13.975] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    13.975] (II) Using input driver 'evdev' for 'Power Button'
    [    13.975] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    13.976] (**) Power Button: always reports core events
    [    13.976] (**) Power Button: Device: "/dev/input/event0"
    [    13.976] (--) Power Button: Found keys
    [    13.976] (II) Power Button: Configuring as keyboard
    [    13.976] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
    [    13.976] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [    13.976] (**) Option "xkb_rules" "evdev"
    [    13.976] (**) Option "xkb_model" "pc105"
    [    13.976] (**) Option "xkb_layout" "us"
    [    13.986] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event3)
    [    13.986] (II) No input driver/identifier specified (ignoring)
    [    13.988] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
    [    13.988] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [    13.988] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [    13.988] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    13.988] (**) AT Translated Set 2 keyboard: always reports core events
    [    13.988] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event2"
    [    13.988] (--) AT Translated Set 2 keyboard: Found keys
    [    13.988] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [    13.988] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
    [    13.988] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [    13.988] (**) Option "xkb_rules" "evdev"
    [    13.988] (**) Option "xkb_model" "pc105"
    [    13.988] (**) Option "xkb_layout" "us"
    [    13.989] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event4)
    [    13.989] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
    [    13.989] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
    [    13.989] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    13.989] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
    [    13.989] (**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event4"
    [    13.989] (--) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
    [    13.989] (--) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
    [    13.989] (--) ImExPS/2 Generic Explorer Mouse: Found relative axes
    [    13.989] (--) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
    [    13.989] (II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
    [    13.989] (II) ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
    [    13.989] (**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
    [    13.989] (**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [    13.989] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
    [    13.989] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
    [    13.990] (II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
    [    13.990] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
    [    13.990] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
    [    13.990] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
    [    13.990] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
    [    13.990] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
    [    13.990] (II) No input driver/identifier specified (ignoring)
    [    14.019] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
    [    14.329] (II) fglrx(0): EDID vendor "SAN", prod id 1325
    [    14.329] (II) fglrx(0): Using EDID range info for horizontal sync
    [    14.329] (II) fglrx(0): Using EDID range info for vertical refresh
    [    14.329] (II) fglrx(0): Printing DDC gathered Modelines:
    [    14.329] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz)
    [    14.329] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    14.329] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [    14.329] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
    [    14.329] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    14.329] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    14.329] (II) fglrx(0): Modeline "1600x1200"x61.0  163.78  1600 1704 1880 2160  1200 1201 1204 1243 -hsync +vsync (75.8 kHz)
    [    15.047] (II) fglrx(0): EDID vendor "SAN", prod id 1325
    [    15.047] (II) fglrx(0): Using hsync ranges from config file
    [    15.047] (II) fglrx(0): Using vrefresh ranges from config file
    [    15.047] (II) fglrx(0): Printing DDC gathered Modelines:
    [    15.047] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz)
    [    15.047] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    15.047] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [    15.047] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
    [    15.047] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    15.047] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    15.047] (II) fglrx(0): Modeline "1600x1200"x61.0  163.78  1600 1704 1880 2160  1200 1201 1204 1243 -hsync +vsync (75.8 kHz)
    [    15.777] (II) fglrx(0): EDID vendor "SAN", prod id 1325
    [    15.777] (II) fglrx(0): Using hsync ranges from config file
    [    15.778] (II) fglrx(0): Using vrefresh ranges from config file
    [    15.778] (II) fglrx(0): Printing DDC gathered Modelines:
    [    15.778] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz)
    [    15.778] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    15.778] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [    15.778] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
    [    15.778] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    15.778] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    15.778] (II) fglrx(0): Modeline "1600x1200"x61.0  163.78  1600 1704 1880 2160  1200 1201 1204 1243 -hsync +vsync (75.8 kHz)
    [    18.677] (II) fglrx(0): EDID vendor "SAN", prod id 1325
    [    18.677] (II) fglrx(0): Using hsync ranges from config file
    [    18.677] (II) fglrx(0): Using vrefresh ranges from config file
    [    18.677] (II) fglrx(0): Printing DDC gathered Modelines:
    [    18.677] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz)
    [    18.677] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    18.677] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [    18.677] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
    [    18.677] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    18.677] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    18.677] (II) fglrx(0): Modeline "1600x1200"x61.0  163.78  1600 1704 1880 2160  1200 1201 1204 1243 -hsync +vsync (75.8 kHz)
    [    26.977] (II) fglrx(0): EDID vendor "SAN", prod id 1325
    [    26.977] (II) fglrx(0): Using hsync ranges from config file
    [    26.977] (II) fglrx(0): Using vrefresh ranges from config file
    [    26.977] (II) fglrx(0): Printing DDC gathered Modelines:
    [    26.977] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz)
    [    26.977] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    26.977] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [    26.977] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
    [    26.977] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    26.977] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    26.977] (II) fglrx(0): Modeline "1600x1200"x61.0  163.78  1600 1704 1880 2160  1200 1201 1204 1243 -hsync +vsync (75.8 kHz)
    [    27.478] (II) fglrx(0): EDID vendor "SAN", prod id 1325
    [    27.479] (II) fglrx(0): Using hsync ranges from config file
    [    27.479] (II) fglrx(0): Using vrefresh ranges from config file
    [    27.479] (II) fglrx(0): Printing DDC gathered Modelines:
    [    27.479] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz)
    [    27.479] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    27.479] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [    27.479] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
    [    27.479] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    27.479] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    27.479] (II) fglrx(0): Modeline "1600x1200"x61.0  163.78  1600 1704 1880 2160  1200 1201 1204 1243 -hsync +vsync (75.8 kHz)
    [    27.886] (II) fglrx(0): EDID vendor "SAN", prod id 1325
    [    27.886] (II) fglrx(0): Using hsync ranges from config file
    [    27.886] (II) fglrx(0): Using vrefresh ranges from config file
    [    27.886] (II) fglrx(0): Printing DDC gathered Modelines:
    [    27.886] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz)
    [    27.886] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    27.886] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [    27.886] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
    [    27.886] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    27.886] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    27.886] (II) fglrx(0): Modeline "1600x1200"x61.0  163.78  1600 1704 1880 2160  1200 1201 1204 1243 -hsync +vsync (75.8 kHz)
    [    27.923] (II) XKB: reuse xkmfile /var/lib/xkb/server-A77BBE312A49C9FE89948D38B2A8CB84C3CBB410.xkm
    [    33.486] (II) fglrx(0): EDID vendor "SAN", prod id 1325
    [    33.486] (II) fglrx(0): Using hsync ranges from config file
    [    33.486] (II) fglrx(0): Using vrefresh ranges from config file
    [    33.486] (II) fglrx(0): Printing DDC gathered Modelines:
    [    33.486] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz)
    [    33.486] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [    33.486] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [    33.486] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
    [    33.486] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [    33.486] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [    33.486] (II) fglrx(0): Modeline "1600x1200"x61.0  163.78  1600 1704 1880 2160  1200 1201 1204 1243 -hsync +vsync (75.8 kHz)
    [   975.075] (II) fglrx(0): EDID vendor "SAN", prod id 1325
    [   975.075] (II) fglrx(0): Using hsync ranges from config file
    [   975.075] (II) fglrx(0): Using vrefresh ranges from config file
    [   975.075] (II) fglrx(0): Printing DDC gathered Modelines:
    [   975.075] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz)
    [   975.075] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [   975.075] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [   975.075] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
    [   975.075] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [   975.075] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [   975.075] (II) fglrx(0): Modeline "1600x1200"x61.0  163.78  1600 1704 1880 2160  1200 1201 1204 1243 -hsync +vsync (75.8 kHz)
    [  8734.914] (II) XKB: reuse xkmfile /var/lib/xkb/server-A77BBE312A49C9FE89948D38B2A8CB84C3CBB410.xkm
    [ 23566.420] (II) fglrx(0): EDID vendor "SAN", prod id 1325
    [ 23566.420] (II) fglrx(0): Using hsync ranges from config file
    [ 23566.420] (II) fglrx(0): Using vrefresh ranges from config file
    [ 23566.420] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 23566.420] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz)
    [ 23566.420] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 23566.420] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 23566.420] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 23566.421] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 23566.421] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 23566.421] (II) fglrx(0): Modeline "1600x1200"x61.0  163.78  1600 1704 1880 2160  1200 1201 1204 1243 -hsync +vsync (75.8 kHz)
    [ 24826.708] (II) fglrx(0): EDID vendor "SAN", prod id 1325
    [ 24826.708] (II) fglrx(0): Using hsync ranges from config file
    [ 24826.708] (II) fglrx(0): Using vrefresh ranges from config file
    [ 24826.708] (II) fglrx(0): Printing DDC gathered Modelines:
    [ 24826.708] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 -hsync -vsync (60.0 kHz)
    [ 24826.708] (II) fglrx(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 24826.708] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 24826.708] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 24826.708] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 24826.708] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 24826.708] (II) fglrx(0): Modeline "1600x1200"x61.0  163.78  1600 1704 1880 2160  1200 1201 1204 1243 -hsync +vsync (75.8 kHz)
    [ 24858.086] (II) XKB: reuse xkmfile /var/lib/xkb/server-A77BBE312A49C9FE89948D38B2A8CB84C3CBB410.xkm
    [ 26120.748] (II) XKB: reuse xkmfile /var/lib/xkb/server-A77BBE312A49C9FE89948D38B2A8CB84C3CBB410.xkm
    [ 26178.085] (II) XKB: reuse xkmfile /var/lib/xkb/server-A77BBE312A49C9FE89948D38B2A8CB84C3CBB410.xkm
    [ 26671.446] (II) XKB: reuse xkmfile /var/lib/xkb/server-A77BBE312A49C9FE89948D38B2A8CB84C3CBB410.xkm
    [ 26688.085] (II) XKB: reuse xkmfile /var/lib/xkb/server-A77BBE312A49C9FE89948D38B2A8CB84C3CBB410.xkm
    [ 26689.945] (II) XKB: reuse xkmfile /var/lib/xkb/server-A77BBE312A49C9FE89948D38B2A8CB84C3CBB410.xkm
    [ 26718.096] (II) XKB: reuse xkmfile /var/lib/xkb/server-A77BBE312A49C9FE89948D38B2A8CB84C3CBB410.xkm
    [ 26753.641] (II) XKB: reuse xkmfile /var/lib/xkb/server-A77BBE312A49C9FE89948D38B2A8CB84C3CBB410.xkm
    [ 26778.083] (II) XKB: reuse xkmfile /var/lib/xkb/server-A77BBE312A49C9FE89948D38B2A8CB84C3CBB410.xkm
    [ 26878.143] (II) XKB: reuse xkmfile /var/lib/xkb/server-A77BBE312A49C9FE89948D38B2A8CB84C3CBB410.xkm
    [ 26904.085] (II) XKB: reuse xkmfile /var/lib/xkb/server-A77BBE312A49C9FE89948D38B2A8CB84C3CBB410.xkm
    [ 27031.480] (II) XKB: reuse xkmfile /var/lib/xkb/server-A77BBE312A49C9FE89948D38B2A8CB84C3CBB410.xkm
    [ 27057.086] (II) XKB: reuse xkmfile /var/lib/xkb/server-A77BBE312A49C9FE89948D38B2A8CB84C3CBB410.xkm
    [ 27194.703] (II) XKB: reuse xkmfile /var/lib/xkb/server-A77BBE312A49C9FE89948D38B2A8CB84C3CBB410.xkm
    Thank you for Replying
    Glenn.

  7. #7
    Join Date
    Jun 2007
    Beans
    12,678

    Re: ATI Radeon HD3450 Video card dangerous?

    13.825] (WW) fglrx(0): * kernel module (fglrx.ko) may be missing or incompatible
    What happens when you try to manually load the module with this command?
    Code:
    sudo modprobe -v fglrx

  8. #8
    Join Date
    Jan 2012
    Beans
    248

    Re: ATI Radeon HD3450 Video card dangerous?

    Ok, here it is:

    Code:
    glenn@acer:~$ sudo modprobe -v fglrx
    [sudo] password for glenn: 
    FATAL: Module fglrx not found.
    glenn@acer:~$
    Well now thats a surprise, I followed the install instructions. Very odd.

  9. #9
    Join Date
    Jun 2007
    Beans
    12,678

    Re: ATI Radeon HD3450 Video card dangerous?

    There has to be some reason why it's not installing the kernel module. Maybe look in /var/lib/dkms/fglrx

  10. #10
    Join Date
    Jan 2012
    Beans
    248

    Re: ATI Radeon HD3450 Video card dangerous?

    Code:
    glenn@acer:~$  cd /var/lib/dkms/fglrx
    glenn@acer:/var/lib/dkms/fglrx$ ls
    8.951
    glenn@acer:/var/lib/dkms/fglrx$ cd 8.951
    glenn@acer:/var/lib/dkms/fglrx/8.951$ ls
    build  source
    glenn@acer:/var/lib/dkms/fglrx/8.951$ cd build
    glenn@acer:/var/lib/dkms/fglrx/8.951/build$ ls
    2.6.x              firegl_public.c  kcl_debug.c  kcl_iommu.h     kcl_wait.h
    dkms.conf          firegl_public.h  kcl_debug.h  kcl_osconfig.h  libfglrx_ip.a
    drm_compat.h       kcl_acpi.c       kcl.h        kcl_pci.c       make.log
    drm.h              kcl_acpi.h       kcl_io.c     kcl_pci.h       make.sh
    drm_os_linux.h     kcl_agp.c        kcl_ioctl.c  kcl_str.c       make.sh.log
    drmP.h             kcl_agp.h        kcl_ioctl.h  kcl_str.h       patches
    drm_proc.h         kcl.c            kcl_io.h     kcl_type.h
    fglrxko_pci_ids.h  kcl_config.h     kcl_iommu.c  kcl_wait.c
    glenn@acer:/var/lib/dkms/fglrx/8.951/build$
    Ok, where to from here?

    Glenn.

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •