Ubuntu Member
Woo hoo!wlan0 IEEE 802.11bgn ESSID:"Wifinka"
Mode:Managed Frequency:2.462 GHz Access Point: C8:6C:87:F3:D2:E0
Bit Rate=108 Mb/s Tx-Power=16 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
I fear this is an N speed issue. I know N is the future but I also know realistically that many Linux drivers are troubled with N. Can you experimentally turn off N in the router and let us have your report? Please see attached. In this example, I'd set 802.11-n-mode to OFF.
"Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, B.Sc., M.Sc., M.A., Ph.D., Sc.D.
Frothy Coffee!
Thank you! It works.. I have switched from 802.11b+g+n to 802.11b+g.
Thank you very much again!
Ubuntu Member
Awesome! I'm glad it's working. I am sorry, however, that my N fears are confirmed in the case of ath9k.Originally Posted by ViliX64
"Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, B.Sc., M.Sc., M.A., Ph.D., Sc.D.
Spilled the Beans
Hi chili,
Hp laptop. 12.04 UEFI. No wireless.
dmesg | grep iwl doesnt show anything.
rfkill list all shows :
0: hp-wifi: Wireless LAN
Soft Blocked: no
Hard Blocked: no
1: hp-bluetooth: Bluetooth
Soft Blocked: no
Hard Blocked: no
I dont know why but I think its because of a bug in the way UEFI works with ubuntu. But i know i'm just being skeptical here. Thanks in advance.!
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.0-23-generic (buildd@komainu) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #35~precise1-Ubuntu SMP Fri Jan 25 17:13:26 UTC 2013 (Ubuntu 3.5.0-23.35~precise1-generic 3.5.7.2)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-23-generic root=UUID=c7b593da-4cd1-404e-af34-04a70c23847a ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a9dbefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000a9dbf000-0x00000000aaebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aaebf000-0x00000000aafbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000aafbf000-0x00000000aaffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000aafff000-0x00000000aaffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ab000000-0x00000000af9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000024f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0xaaffe000 ACPI 2.0=0xaaffe014 SMBIOS=0xaaebef98
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem03: type=7, attr=0xf, range=[0x0000000000070000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x0000000000088000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x00000000005ef000) (4MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x00000000005ef000-0x0000000020000000) (506MB)
[ 0.000000] efi: mem07: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000020200000-0x0000000036246000) (352MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000036246000-0x0000000036248000) (0MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000036248000-0x000000003624a000) (0MB)
[ 0.000000] efi: mem11: type=2, attr=0xf, range=[0x000000003624a000-0x000000003711d000) (14MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x000000003711d000-0x0000000040004000) (142MB)
[ 0.000000] efi: mem13: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000040005000-0x00000000749b0000) (841MB)
[ 0.000000] efi: mem15: type=2, attr=0xf, range=[0x00000000749b0000-0x000000009e3c0000) (666MB)
[ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x000000009e3c0000-0x000000009e3e0000) (0MB)
[ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x000000009e3e0000-0x00000000a09a7000) (37MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000a09a7000-0x00000000a13b0000) (10MB)
[ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000a13b0000-0x00000000a15a1000) (1MB)
[ 0.000000] efi: mem20: type=1, attr=0xf, range=[0x00000000a15a1000-0x00000000a15bf000) (0MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000a15bf000-0x00000000a6df3000) (88MB)
[ 0.000000] efi: mem22: type=4, attr=0xf, range=[0x00000000a6df3000-0x00000000a7675000) (8MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000a7675000-0x00000000a7965000) (2MB)
[ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x00000000a7965000-0x00000000a79bc000) (0MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000a79bc000-0x00000000a79be000) (0MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000a79be000-0x00000000a7a0a000) (0MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000a7a0a000-0x00000000a7a0f000) (0MB)
[ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000a7a0f000-0x00000000a7a16000) (0MB)
[ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000a7a16000-0x00000000a7a17000) (0MB)
[ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000a7a17000-0x00000000a7a41000) (0MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000a7a41000-0x00000000a7a42000) (0MB)
[ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000a7a42000-0x00000000a7b83000) (1MB)
[ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000a7b83000-0x00000000a7b86000) (0MB)
[ 0.000000] efi: mem34: type=4, attr=0xf, range=[0x00000000a7b86000-0x00000000a7b8a000) (0MB)
[ 0.000000] efi: mem35: type=7, attr=0xf, range=[0x00000000a7b8a000-0x00000000a7b8d000) (0MB)
[ 0.000000] efi: mem36: type=4, attr=0xf, range=[0x00000000a7b8d000-0x00000000a7bd6000) (0MB)
[ 0.000000] efi: mem37: type=7, attr=0xf, range=[0x00000000a7bd6000-0x00000000a7bdf000) (0MB)
[ 0.000000] efi: mem38: type=4, attr=0xf, range=[0x00000000a7bdf000-0x00000000a7bff000) (0MB)
[ 0.000000] efi: mem39: type=7, attr=0xf, range=[0x00000000a7bff000-0x00000000a7c0a000) (0MB)
[ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000a7c0a000-0x00000000a7fce000) (3MB)
[ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x00000000a7fce000-0x00000000a7fd5000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000a7fd5000-0x00000000a7fee000) (0MB)
[ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x00000000a7fee000-0x00000000a7ff0000) (0MB)
[ 0.000000] efi: mem44: type=4, attr=0xf, range=[0x00000000a7ff0000-0x00000000a7ff1000) (0MB)
[ 0.000000] efi: mem45: type=7, attr=0xf, range=[0x00000000a7ff1000-0x00000000a7ff3000) (0MB)
[ 0.000000] efi: mem46: type=4, attr=0xf, range=[0x00000000a7ff3000-0x00000000a95bf000) (21MB)
[ 0.000000] efi: mem47: type=7, attr=0xf, range=[0x00000000a95bf000-0x00000000a9a3a000) (4MB)
[ 0.000000] efi: mem48: type=2, attr=0xf, range=[0x00000000a9a3a000-0x00000000a9a3e000) (0MB)
[ 0.000000] efi: mem49: type=3, attr=0xf, range=[0x00000000a9a3e000-0x00000000a9dbf000) (3MB)
[ 0.000000] efi: mem50: type=5, attr=0x800000000000000f, range=[0x00000000a9dbf000-0x00000000aa1bf000) (4MB)
[ 0.000000] efi: mem51: type=6, attr=0x800000000000000f, range=[0x00000000aa1bf000-0x00000000aa3bf000) (2MB)
[ 0.000000] efi: mem52: type=0, attr=0xf, range=[0x00000000aa3bf000-0x00000000aaebf000) (11MB)
[ 0.000000] efi: mem53: type=10, attr=0xf, range=[0x00000000aaebf000-0x00000000aafbf000) (1MB)
[ 0.000000] efi: mem54: type=9, attr=0xf, range=[0x00000000aafbf000-0x00000000aafff000) (0MB)
[ 0.000000] efi: mem55: type=4, attr=0xf, range=[0x00000000aafff000-0x00000000ab000000) (0MB)
[ 0.000000] efi: mem56: type=7, attr=0xf, range=[0x0000000100000000-0x000000024f600000) (5366MB)
[ 0.000000] efi: mem57: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem58: type=0, attr=0x0, range=[0x00000000ab000000-0x00000000afa00000) (74MB)
[ 0.000000] efi: mem59: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem60: type=11, attr=0x8000000000000001, range=[0x00000000feb00000-0x00000000feb04000) (0MB)
[ 0.000000] efi: mem61: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem62: type=11, attr=0x8000000000000001, range=[0x00000000fed10000-0x00000000fed1a000) (0MB)
[ 0.000000] efi: mem63: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem64: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem65: type=11, attr=0x8000000000000000, range=[0x00000000ffd80000-0x0000000100000000) (2MB)
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP 2000 Notebook PC/1858, BIOS F.36 02/19/2013
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x24f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FE0000000 write-back
[ 0.000000] 2 base 0A0000000 mask FF8000000 write-back
[ 0.000000] 3 base 0A8000000 mask FFE000000 write-back
[ 0.000000] 4 base 0AA000000 mask FFF000000 write-back
[ 0.000000] 5 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask F80000000 write-back
[ 0.000000] 8 base 24F600000 mask FFFE00000 uncachable
[ 0.000000] 9 base 24F800000 mask FFF800000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xab000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xaaffffff]
[ 0.000000] [mem 0x00000000-0xaaffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xaaffffff @ [mem 0x1fffc000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x24f5fffff]
[ 0.000000] [mem 0x100000000-0x24f5fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x24f5fffff @ [mem 0xa9a37000-0xa9a3dfff]
[ 0.000000] RAMDISK: [mem 0x3624a000-0x3711cfff]
[ 0.000000] ACPI: RSDP 00000000aaffe014 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 00000000aaffe210 000B4 (v01 HPQOEM SLIC-MPC 00000001 HP 01000013)
[ 0.000000] ACPI: FACP 00000000aaffb000 0010C (v05 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: DSDT 00000000aafe7000 103B9 (v01 HPQOEM INSYDE 00000000 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000aafb9000 00040
[ 0.000000] ACPI: UEFI 00000000aaffd000 00236 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: ASF! 00000000aaffc000 000A5 (v32 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: HPET 00000000aaffa000 00038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: APIC 00000000aaff9000 0008C (v03 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: MCFG 00000000aaff8000 0003C (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: WDAT 00000000aafe6000 00224 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 00000000aafe5000 00166 (v01 HPQOEM INSYDE 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 00000000aafe3000 00028 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: ASPT 00000000aafe1000 00034 (v07 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: DBGP 00000000aafe0000 00034 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: FPDT 00000000aafde000 00044 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: MSDM 00000000aafdd000 00055 (v03 HPQOEM SLIC-MPC 00000001 HP 00040000)
[ 0.000000] ACPI: SSDT 00000000aafdc000 009AA (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000aafdb000 00B22 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000aafda000 002D7 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000aafd9000 00348 (v01 HPQOEM INSYDE 00003000 ACPI 00040000)
[ 0.000000] ACPI: BGRT 00000000aafd8000 00038 (v01 HPQOEM INSYDE 00000001 HP 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000024f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x24f5fffff]
[ 0.000000] NODE_DATA [mem 0x24f5fc000-0x24f5fffff]
[ 0.000000] [ffffea0000000000-ffffea00093fffff] PMD -> [ffff880246c00000-ffff88024ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x24f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x00087fff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xa9dbefff]
[ 0.000000] node 0: [mem 0xaafff000-0xaaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x24f5fffff]
[ 0.000000] On node 0 totalpages: 2068791
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 7 pages reserved
[ 0.000000] DMA zone: 3889 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 674815 pages, LIFO batch:31
[ 0.000000] Normal zone: 21464 pages used for memmap
[ 0.000000] Normal zone: 1352232 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000088000 - 00000000000c0000
[ 0.000000] PM: Registered nosave memory: 00000000000c0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000a9dbf000 - 00000000aaebf000
[ 0.000000] PM: Registered nosave memory: 00000000aaebf000 - 00000000aafbf000
[ 0.000000] PM: Registered nosave memory: 00000000aafbf000 - 00000000aafff000
[ 0.000000] PM: Registered nosave memory: 00000000ab000000 - 00000000afa00000
[ 0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000
[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[ 0.000000] e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88024f200000 s83584 r8192 d22912 u262144
[ 0.000000] pcpu-alloc: s83584 r8192 d22912 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2030936
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-23-generic root=UUID=c7b593da-4cd1-404e-af34-04a70c23847a ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7994508k/9689088k available (6828k kernel code, 1413924k absent, 280656k reserved, 6342k data, 948k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2594.138 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.27 BogoMIPS (lpj=10376552)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.036836] Security Framework initialized
[ 0.036850] AppArmor: AppArmor initialized
[ 0.036851] Yama: becoming mindful.
[ 0.037307] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.039176] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.040001] Mount-cache hash table entries: 256
[ 0.040139] Initializing cgroup subsys cpuacct
[ 0.040141] Initializing cgroup subsys memory
[ 0.040147] Initializing cgroup subsys devices
[ 0.040148] Initializing cgroup subsys freezer
[ 0.040149] Initializing cgroup subsys blkio
[ 0.040150] Initializing cgroup subsys perf_event
[ 0.040173] CPU: Physical Processor ID: 0
[ 0.040173] CPU: Processor Core ID: 0
[ 0.040177] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.040177] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.040517] mce: CPU supports 7 MCE banks
[ 0.040527] CPU0: Thermal monitoring enabled (TM1)
[ 0.040532] using mwait in idle threads.
[ 0.042410] ACPI: Core revision 20120320
[ 0.079652] ftrace: allocating 27653 entries in 109 pages
[ 0.091829] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.131440] CPU0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz stepping 09
[ 0.236566] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.236571] ... version: 3
[ 0.236572] ... bit width: 48
[ 0.236573] ... generic registers: 4
[ 0.236574] ... value mask: 0000ffffffffffff
[ 0.236575] ... max period: 000000007fffffff
[ 0.236575] ... fixed-purpose events: 3
[ 0.236576] ... event mask: 000000070000000f
[ 0.236701] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.236771] Booting Node 0, Processors #1 #2 #3
[ 0.277166] Brought up 4 CPUs
[ 0.277169] Total of 4 processors activated (20753.10 BogoMIPS).
[ 0.280414] devtmpfs: initialized
[ 0.281345] EVM: security.selinux
[ 0.281346] EVM: security.SMACK64
[ 0.281347] EVM: security.capability
[ 0.281380] PM: Registering ACPI NVS region [mem 0xaaebf000-0xaafbefff] (1048576 bytes)
[ 0.282001] dummy:
[ 0.282030] RTC time: 20:56:43, date: 07/07/13
[ 0.282056] NET: Registered protocol family 16
[ 0.282127] Trying to unpack rootfs image as initramfs...
[ 0.282184] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.282186] ACPI: bus type pci registered
[ 0.282240] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.282241] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.303913] PCI: Using configuration type 1 for base access
[ 0.304694] bio: create slab <bio-0> at 0
[ 0.304762] ACPI: Added _OSI(Module Device)
[ 0.304763] ACPI: Added _OSI(Processor Device)
[ 0.304764] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.304765] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.306112] ACPI: EC: Look up EC in DSDT
[ 0.307427] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.336854] ACPI: SSDT 00000000aae19018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.337199] ACPI: Dynamic OEM Table Load:
[ 0.337201] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20121220)
[ 0.356564] ACPI: SSDT 00000000aae5ba98 00303 (v01 PmRef ApIst 00003000 INTL 20121220)
[ 0.356932] ACPI: Dynamic OEM Table Load:
[ 0.356934] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20121220)
[ 0.392384] ACPI: SSDT 00000000aae18d98 00119 (v01 PmRef ApCst 00003000 INTL 20121220)
[ 0.392726] ACPI: Dynamic OEM Table Load:
[ 0.392727] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20121220)
[ 0.490639] Freeing initrd memory: 15180k freed
[ 1.326882] ACPI: Interpreter enabled
[ 1.326886] ACPI: (supports S0 S3 S4 S5)
[ 1.326911] ACPI: Using IOAPIC for interrupt routing
[ 1.365816] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.366112] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 1.366115] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.366304] \_SB_.PCI0:_OSC invalid UUID
[ 1.366305] _OSC request data:1 8 1f
[ 1.366308] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 1.366584] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 1.366586] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 1.366588] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 1.366589] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 1.366591] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 1.366592] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 1.366593] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
[ 1.366595] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 1.366596] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 1.366597] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 1.366599] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 1.366600] pci_root PNP0A08:00: host bridge window [mem 0xafa00000-0xfeafffff]
[ 1.366623] PCI host bridge to bus 0000:00
[ 1.366625] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.366626] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.366628] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.366629] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 1.366630] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 1.366632] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 1.366633] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 1.366634] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 1.366636] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 1.366637] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 1.366638] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 1.366640] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
[ 1.366647] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 1.366681] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 1.366690] pci 0000:00:02.0: reg 10: [mem 0xc2000000-0xc23fffff 64bit]
[ 1.366697] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 1.366701] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 1.366754] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 1.366777] pci 0000:00:16.0: reg 10: [mem 0xc2604000-0xc260400f 64bit]
[ 1.366852] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 1.366886] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 1.366907] pci 0000:00:1a.0: reg 10: [mem 0xc2609000-0xc26093ff]
[ 1.366997] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.367023] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 1.367038] pci 0000:00:1b.0: reg 10: [mem 0xc2600000-0xc2603fff 64bit]
[ 1.367105] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.367128] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 1.367207] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.367232] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 1.367310] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.367335] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[ 1.367413] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.367447] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 1.367467] pci 0000:00:1d.0: reg 10: [mem 0xc2608000-0xc26083ff]
[ 1.367557] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.367583] pci 0000:00:1f.0: [8086:1e5d] type 00 class 0x060100
[ 1.367706] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 1.367724] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
[ 1.367732] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
[ 1.367740] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
[ 1.367748] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
[ 1.367755] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 1.367763] pci 0000:00:1f.2: reg 24: [mem 0xc2607000-0xc26077ff]
[ 1.367808] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.367827] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 1.367842] pci 0000:00:1f.3: reg 10: [mem 0xc2605000-0xc26050ff 64bit]
[ 1.367862] pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f]
[ 1.368012] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
[ 1.368084] pci 0000:01:00.0: reg 10: [io 0x3000-0x30ff]
[ 1.368199] pci 0000:01:00.0: reg 18: [mem 0xc2404000-0xc2404fff 64bit pref]
[ 1.368274] pci 0000:01:00.0: reg 20: [mem 0xc2400000-0xc2403fff 64bit pref]
[ 1.368611] pci 0000:01:00.0: supports D1 D2
[ 1.368612] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.376074] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 1.376078] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 1.376086] pci 0000:00:1c.0: bridge window [mem 0xc2400000-0xc24fffff 64bit pref]
[ 1.376169] pci 0000:02:00.0: [1814:3290] type 00 class 0x028000
[ 1.376188] pci 0000:02:00.0: reg 10: [mem 0xc2510000-0xc251ffff]
[ 1.376327] pci 0000:02:00.0: PME# supported from D0 D3hot
[ 1.376376] pci 0000:02:00.1: [1814:3298] type 00 class 0x0d1100
[ 1.376395] pci 0000:02:00.1: reg 10: [mem 0xc2500000-0xc250ffff]
[ 1.376533] pci 0000:02:00.1: supports D1
[ 1.376535] pci 0000:02:00.1: PME# supported from D0 D1 D3hot
[ 1.384049] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[ 1.384055] pci 0000:00:1c.2: bridge window [mem 0xc2500000-0xc25fffff]
[ 1.384195] pci 0000:03:00.0: [10ec:5229] type 00 class 0xff0000
[ 1.384258] pci 0000:03:00.0: reg 10: [mem 0xc1000000-0xc1000fff]
[ 1.384743] pci 0000:03:00.0: supports D1 D2
[ 1.384745] pci 0000:03:00.0: PME# supported from D1 D2 D3hot
[ 1.392043] pci 0000:00:1c.3: PCI bridge to [bus 03-08]
[ 1.392047] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 1.392051] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc1ffffff]
[ 1.392057] pci 0000:00:1c.3: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[ 1.392073] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.392193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.392225] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 1.392248] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.392326] \_SB_.PCI0:_OSC invalid UUID
[ 1.392327] _OSC request data:1 1f 1f
[ 1.392330] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 1.392363] \_SB_.PCI0:_OSC invalid UUID
[ 1.392364] _OSC request data:1 0 1d
[ 1.392366] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 1.392367] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 1.394607] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.394644] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.394679] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.394714] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.394748] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.394782] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.394816] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.394850] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.394922] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks= none
[ 1.394926] vgaarb: loaded
[ 1.394927] vgaarb: bridge control possible 0000:00:02.0
[ 1.395040] SCSI subsystem initialized
[ 1.395079] libata version 3.00 loaded.
[ 1.395094] ACPI: bus type usb registered
[ 1.395107] usbcore: registered new interface driver usbfs
[ 1.395114] usbcore: registered new interface driver hub
[ 1.395130] usbcore: registered new device driver usb
[ 1.395183] PCI: Using ACPI for IRQ routing
[ 1.402463] PCI: pci_cache_line_size set to 64 bytes
[ 1.402561] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 1.402563] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 1.402564] e820: reserve RAM buffer [mem 0xa9dbf000-0xabffffff]
[ 1.402565] e820: reserve RAM buffer [mem 0xab000000-0xabffffff]
[ 1.402566] e820: reserve RAM buffer [mem 0x24f600000-0x24fffffff]
[ 1.402637] NetLabel: Initializing
[ 1.402639] NetLabel: domain hash size = 128
[ 1.402639] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.402646] NetLabel: unlabeled traffic allowed by default
[ 1.402694] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.402700] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.404708] Switching to clocksource hpet
[ 1.409075] AppArmor: AppArmor Filesystem Enabled
[ 1.409092] pnp: PnP ACPI init
[ 1.409102] ACPI: bus type pnp registered
[ 1.409282] pnp 00:00: [bus 00-fe]
[ 1.409284] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.409286] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.409287] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.409289] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.409290] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.409291] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.409293] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.409294] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.409296] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.409297] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.409299] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.409300] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.409301] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.409303] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.409304] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.409305] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.409306] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.409308] pnp 00:00: [mem 0xafa00000-0xfeafffff window]
[ 1.409311] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 1.409360] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.409370] pnp 00:01: [io 0x0000-0x001f]
[ 1.409371] pnp 00:01: [io 0x0081-0x0091]
[ 1.409372] pnp 00:01: [io 0x0093-0x009f]
[ 1.409374] pnp 00:01: [io 0x00c0-0x00df]
[ 1.409375] pnp 00:01: [dma 4]
[ 1.409389] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.409394] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 1.409408] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.409472] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 1.409485] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.409492] pnp 00:04: [io 0x00f0]
[ 1.409500] pnp 00:04: [irq 13]
[ 1.409515] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.409522] pnp 00:05: [io 0x002e-0x002f]
[ 1.409524] pnp 00:05: [io 0x004e-0x004f]
[ 1.409525] pnp 00:05: [io 0x0061]
[ 1.409526] pnp 00:05: [io 0x0063]
[ 1.409527] pnp 00:05: [io 0x0065]
[ 1.409528] pnp 00:05: [io 0x0067]
[ 1.409529] pnp 00:05: [io 0x0070]
[ 1.409530] pnp 00:05: [io 0x0080]
[ 1.409531] pnp 00:05: [io 0x0092]
[ 1.409533] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.409534] pnp 00:05: [io 0x0680-0x069f]
[ 1.409535] pnp 00:05: [io 0x1000-0x100f]
[ 1.409536] pnp 00:05: [io 0xffff]
[ 1.409537] pnp 00:05: [io 0xffff]
[ 1.409538] pnp 00:05: [io 0x0400-0x0453]
[ 1.409540] pnp 00:05: [io 0x0458-0x047f]
[ 1.409541] pnp 00:05: [io 0x0500-0x057f]
[ 1.409542] pnp 00:05: [io 0x164e-0x164f]
[ 1.409571] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.409573] system 00:05: [io 0x1000-0x100f] has been reserved
[ 1.409575] system 00:05: [io 0xffff] has been reserved
[ 1.409576] system 00:05: [io 0xffff] has been reserved
[ 1.409577] system 00:05: [io 0x0400-0x0453] has been reserved
[ 1.409579] system 00:05: [io 0x0458-0x047f] has been reserved
[ 1.409580] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.409582] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.409584] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.409590] pnp 00:06: [io 0x0070-0x0077]
[ 1.409594] pnp 00:06: [irq 8]
[ 1.409607] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.409625] pnp 00:07: [io 0x0454-0x0457]
[ 1.409648] system 00:07: [io 0x0454-0x0457] has been reserved
[ 1.409650] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.425185] pnp 00:08: [io 0x0060]
[ 1.425186] pnp 00:08: [io 0x0064]
[ 1.425192] pnp 00:08: [irq 1]
[ 1.425214] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.425223] pnp 00:09: [irq 12]
[ 1.425240] pnp 00:09: Plug and Play ACPI device, IDs SYN1e68 SYN1e00 SYN0002 PNP0f13 (active)
[ 1.425320] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 1.425322] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 1.425323] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 1.425324] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 1.425326] pnp 00:0a: [mem 0xe0000000-0xefffffff]
[ 1.425327] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 1.425328] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 1.425329] pnp 00:0a: [mem 0xff000000-0xffffffff]
[ 1.425330] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 1.425332] pnp 00:0a: [mem 0xafa00000-0xafa00fff]
[ 1.425359] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.425361] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.425363] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.425364] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.425366] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.425367] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.425369] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.425370] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.425372] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.425373] system 00:0a: [mem 0xafa00000-0xafa00fff] has been reserved
[ 1.425376] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.425568] pnp 00:0b: [mem 0x20000000-0x201fffff]
[ 1.425569] pnp 00:0b: [mem 0x40004000-0x40004fff]
[ 1.425608] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[ 1.425610] system 00:0b: [mem 0x40004000-0x40004fff] has been reserved
[ 1.425612] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.425622] pnp: PnP ACPI: found 12 devices
[ 1.425623] ACPI: ACPI bus type pnp unregistered
[ 1.431722] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 1.431726] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 1.431734] pci 0000:00:1c.0: bridge window [mem 0xc2400000-0xc24fffff 64bit pref]
[ 1.431741] pci 0000:00:1c.2: PCI bridge to [bus 02-02]
[ 1.431746] pci 0000:00:1c.2: bridge window [mem 0xc2500000-0xc25fffff]
[ 1.431754] pci 0000:00:1c.3: PCI bridge to [bus 03-08]
[ 1.431757] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 1.431762] pci 0000:00:1c.3: bridge window [mem 0xc1000000-0xc1ffffff]
[ 1.431766] pci 0000:00:1c.3: bridge window [mem 0xc0000000-0xc0ffffff 64bit pref]
[ 1.431799] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.431801] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.431802] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.431804] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 1.431805] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 1.431807] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 1.431808] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 1.431809] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 1.431811] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 1.431812] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 1.431814] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 1.431815] pci_bus 0000:00: resource 15 [mem 0xafa00000-0xfeafffff]
[ 1.431817] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 1.431818] pci_bus 0000:01: resource 2 [mem 0xc2400000-0xc24fffff 64bit pref]
[ 1.431820] pci_bus 0000:02: resource 1 [mem 0xc2500000-0xc25fffff]
[ 1.431821] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 1.431823] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc1ffffff]
[ 1.431824] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc0ffffff 64bit pref]
[ 1.431847] NET: Registered protocol family 2
[ 1.431980] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 1.432528] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.433509] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.433618] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.433619] TCP: reno registered
[ 1.433630] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.433656] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 1.433720] NET: Registered protocol family 1
[ 1.433730] pci 0000:00:02.0: Boot video device
[ 1.464615] PCI: CLS 64 bytes, default 64
[ 1.464617] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.464619] software IO TLB [mem 0xa2df3000-0xa6df2fff] (64MB) mapped at [ffff8800a2df3000-ffff8800a6df2fff]
[ 1.464647] Simple Boot Flag at 0x44 set to 0x1
[ 1.465008] audit: initializing netlink socket (disabled)
[ 1.465015] type=2000 audit(1373230603.328:1): initialized
[ 1.486069] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.487374] VFS: Disk quotas dquot_6.5.2
[ 1.487402] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.487717] fuse init (API version 7.19)
[ 1.487769] msgmni has been set to 15744
[ 1.488041] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.488065] io scheduler noop registered
[ 1.488066] io scheduler deadline registered (default)
[ 1.488084] io scheduler cfq registered
[ 1.488269] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.488281] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.488325] efifb: probing for efifb
[ 1.488758] efifb: framebuffer at 0xb0000000, mapped to 0xffffc90021b80000, using 4160k, total 4160k
[ 1.488759] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 1.488760] efifb: scrolling: redraw
[ 1.488761] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.488846] Console: switching to colour frame buffer device 170x48
[ 1.488862] fb0: EFI VGA frame buffer device
[ 1.488867] intel_idle: MWAIT substates: 0x21120
[ 1.488868] intel_idle: v0.4 model 0x3A
[ 1.488868] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.493762] ACPI: AC Adapter [AC] (on-line)
[ 1.493826] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.494248] ACPI: Lid Switch [LID]
[ 1.494276] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.494278] ACPI: Power Button [PWRB]
[ 1.494304] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.494306] ACPI: Power Button [PWRF]
[ 1.494369] ACPI: Requesting acpi_cpufreq
[ 1.530624] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.530626] ACPI: Thermal Zone [TSZ0] (50 C)
[ 1.530639] ACPI: Battery Slot [BAT0] (battery present)
[ 1.530660] GHES: HEST is not enabled!
[ 1.530712] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.531748] Linux agpgart interface v0.103
[ 1.532683] brd: module loaded
[ 1.533171] loop: module loaded
[ 1.533235] ahci 0000:00:1f.2: version 3.0
[ 1.533288] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 1.533313] ahci: SSS flag set, parallel bus scan disabled
[ 1.548399] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 1.548404] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 1.548412] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.556677] scsi0 : ahci
[ 1.556735] scsi1 : ahci
[ 1.556779] scsi2 : ahci
[ 1.556821] scsi3 : ahci
[ 1.556867] scsi4 : ahci
[ 1.556907] scsi5 : ahci
[ 1.556964] ata1: SATA max UDMA/133 abar m2048@0xc2607000 port 0xc2607100 irq 40
[ 1.556966] ata2: DUMMY
[ 1.556968] ata3: SATA max UDMA/133 abar m2048@0xc2607000 port 0xc2607200 irq 40
[ 1.556969] ata4: DUMMY
[ 1.556970] ata5: DUMMY
[ 1.556971] ata6: DUMMY
[ 1.557154] Fixed MDIO Bus: probed
[ 1.557179] tun: Universal TUN/TAP device driver, 1.6
[ 1.557180] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.557212] PPP generic driver version 2.4.2
[ 1.557244] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.557273] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.557276] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.557280] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.557304] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.561197] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.561211] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc2609000
[ 1.565206] ACPI: Battery Slot [BAT0] (battery present)
[ 1.572344] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.572383] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.572385] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.572386] usb usb1: Product: EHCI Host Controller
[ 1.572388] usb usb1: Manufacturer: Linux 3.5.0-23-generic ehci_hcd
[ 1.572389] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.572466] hub 1-0:1.0: USB hub found
[ 1.572470] hub 1-0:1.0: 2 ports detected
[ 1.572522] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.572525] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.572528] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.572547] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.576426] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.576439] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc2608000
[ 1.588313] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.588332] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.588335] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.588351] usb usb2: Product: EHCI Host Controller
[ 1.588352] usb usb2: Manufacturer: Linux 3.5.0-23-generic ehci_hcd
[ 1.588354] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.588421] hub 2-0:1.0: USB hub found
[ 1.588426] hub 2-0:1.0: 2 ports detected
[ 1.588462] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.588472] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.588502] usbcore: registered new interface driver libusual
[ 1.588526] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13S2M] at 0x60,0x64 irq 1,12
[ 1.597781] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.597785] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.597853] mousedev: PS/2 mouse device common for all mice
[ 1.597971] rtc_cmos 00:06: RTC can wake from S4
[ 1.598081] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.598108] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.598154] device-mapper: uevent: version 1.0.3
[ 1.598194] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.598249] cpuidle: using governor ladder
[ 1.598323] cpuidle: using governor menu
[ 1.598325] EFI Variables Facility v0.08 2004-May-17
[ 1.605775] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.875869] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.876566] ata1.00: ATA-8: ST500LT012-9WS142, 0001YAM1, max UDMA/133
[ 1.876568] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.877332] ata1.00: configured for UDMA/133
[ 1.877460] scsi 0:0:0:0: Direct-Access ATA ST500LT012-9WS14 0001 PQ: 0 ANSI: 5
[ 1.877600] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.877603] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.877607] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.877675] sd 0:0:0:0: [sda] Write Protect is off
[ 1.877678] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.877701] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.883787] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.953414] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
[ 1.954745] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.015916] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.015918] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.016195] hub 1-1:1.0: USB hub found
[ 2.016291] hub 1-1:1.0: 6 ports detected
[ 2.127337] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.195257] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.210552] ata3.00: ATAPI: hp DVD-RAM UJ8D1, H.01, max UDMA/100
[ 2.223692] ata3.00: configured for UDMA/100
[ 2.230230] scsi 2:0:0:0: CD-ROM hp DVD-RAM UJ8D1 H.01 PQ: 0 ANSI: 5
[ 2.233371] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.233373] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.233537] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.233664] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.259463] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.259466] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.259737] hub 2-1:1.0: USB hub found
[ 2.259845] hub 2-1:1.0: 6 ports detected
[ 2.462710] Refined TSC clocksource calibration: 2594.109 MHz.
[ 2.462713] Switching to clocksource tsc
[ 2.562633] usb 2-1.3: new high-speed USB device number 3 using ehci_hcd
[ 2.733562] usb 2-1.3: New USB device found, idVendor=064e, idProduct=e263
[ 2.733564] usb 2-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.733566] usb 2-1.3: Product: HP TrueVision HD
[ 2.733569] usb 2-1.3: Manufacturer: SuYin
[ 2.733571] usb 2-1.3: SerialNumber: HF1016-T821-SE01-VH-R01.00.05
[ 3.097276] ashmem: initialized
[ 3.097361] TCP: cubic registered
[ 3.097428] NET: Registered protocol family 10
[ 3.097566] NET: Registered protocol family 17
[ 3.097572] Key type dns_resolver registered
[ 3.097664] PM: Hibernation image not present or could not be loaded.
[ 3.097676] registered taskstats version 1
[ 3.099826] Key type trusted registered
[ 3.101301] Key type encrypted registered
[ 3.103073] Magic number: 5:544:952
[ 3.103100] tty tty9: hash matches
[ 3.103127] memory memory5: hash matches
[ 3.103170] rtc_cmos 00:06: setting system clock to 2013-07-07 20:56:46 UTC (1373230606)
[ 3.103751] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.103752] EDD information not available.
[ 3.104757] Freeing unused kernel memory: 948k freed
[ 3.104844] Write protecting the kernel read-only data: 12288k
[ 3.107422] Freeing unused kernel memory: 1352k freed
[ 3.109431] Freeing unused kernel memory: 1048k freed
[ 3.119602] udevd[111]: starting version 175
[ 3.148055] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.148168] r8169 0000:01:00.0: irq 41 for MSI/MSI-X
[ 3.148326] r8169 0000:01:00.0: eth0: RTL8105e at 0xffffc900100c8000, d8:9d:67:cc:95:e8, XID 00c00000 IRQ 41
[ 4.175953] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 8.665121] Adding 3195900k swap on /dev/sda6. Priority:-1 extents:1 across:3195900k
[ 8.782063] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 8.832411] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.998457] udevd[476]: starting version 175
[ 9.428738] lp: driver loaded but no devices found
[ 9.603967] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ 9.676216] wmi: Mapper loaded
[ 9.761433] input: HP WMI hotkeys as /devices/virtual/input/input4
[ 9.767439] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[ 9.767444] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8802438db258), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 9.767450] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8802438dbaf0), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 9.767654] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[ 9.767659] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8802438db258), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 9.767667] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8802438dbaf0), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 9.803458] ACPI Warning: 0x0000000000000460-0x000000000000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 9.803464] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.803465] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 9.803468] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 9.803470] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.803473] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 9.803475] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.803475] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 9.833189] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ 9.834012] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 9.834802] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 9.835649] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 9.892928] mei 0000:00:16.0: setting latency timer to 64
[ 9.892981] mei 0000:00:16.0: irq 42 for MSI/MSI-X
[ 9.898906] mei 0000:00:16.0: wd: failed to find the client
[ 10.349646] [drm] Initialized drm 1.1.0 20060810
[ 10.606227] kvm: disabled by bios
[ 10.730141] checking generic (b0000000 410000) vs hw (0 0)
[ 10.730146] i915 0000:00:02.0: setting latency timer to 64
[ 10.730498] pci 0000:00:00.0: Intel Ivybridge Chipset
[ 10.730548] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 10.731294] pci 0000:00:00.0: detected 65536K stolen memory
[ 10.736396] Linux video capture interface: v2.00
[ 10.754846] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 10.754854] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 10.754855] [drm] Driver supports precise vblank timestamp query.
[ 10.755421] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+memwns=io+mem
[ 10.765698] uvcvideo: Found UVC 1.00 device HP TrueVision HD (064e:e263)
[ 10.769651] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x240000/0xa2400
[ 10.771688] input: HP TrueVision HD as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
[ 10.771764] usbcore: registered new interface driver uvcvideo
[ 10.771766] USB Video Class driver (1.1.1)
[ 10.816727] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 10.913717] type=1400 audit(1373210814.320:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=691 comm="apparmor_parser"
[ 10.913724] type=1400 audit(1373210814.320:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=685 comm="apparmor_parser"
[ 10.913976] type=1400 audit(1373210814.320:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=691 comm="apparmor_parser"
[ 10.913983] type=1400 audit(1373210814.320:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=685 comm="apparmor_parser"
[ 10.914122] type=1400 audit(1373210814.320:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=691 comm="apparmor_parser"
[ 10.914130] type=1400 audit(1373210814.320:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=685 comm="apparmor_parser"
[ 11.271880] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 11.456349] checking generic (b0000000 410000) vs hw (b0000000 10000000)
[ 11.456352] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 11.456378] Console: switching to colour dummy device 80x25
[ 11.456524] fbcon: inteldrmfb (fb0) is primary device
[ 11.456570] Console: switching to colour frame buffer device 170x48
[ 11.456584] fb0: inteldrmfb frame buffer device
[ 11.456584] drm: registered panic notifier
[ 11.459404] ACPI Warning: _BQC returned an invalid level (20120320/video-480)
[ 11.459432] acpi device:40: registered as cooling_device4
[ 11.459535] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.459567] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 11.459620] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 11.459753] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 12.077065] init: failsafe main process (816) killed by TERM signal
[ 12.090887] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 12.090956] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 12.091015] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 13.598694] ppdev: user-space parallel port driver
[ 13.711801] type=1400 audit(1373210817.124:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=886 comm="apparmor_parser"
[ 13.712090] type=1400 audit(1373210817.124:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=886 comm="apparmor_parser"
[ 13.957616] Bluetooth: Core ver 2.16
[ 13.957631] NET: Registered protocol family 31
[ 13.957632] Bluetooth: HCI device and connection manager initialized
[ 13.957633] Bluetooth: HCI socket layer initialized
[ 13.957634] Bluetooth: L2CAP socket layer initialized
[ 13.957636] Bluetooth: SCO socket layer initialized
[ 14.356227] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 14.356229] Bluetooth: BNEP filters: protocol multicast
[ 14.458022] Bluetooth: RFCOMM TTY layer initialized
[ 14.458027] Bluetooth: RFCOMM socket layer initialized
[ 14.458028] Bluetooth: RFCOMM ver 1.11
[ 16.467372] r8169 0000:01:00.0: eth0: link down
[ 16.467390] r8169 0000:01:00.0: eth0: link down
[ 16.467804] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.468033] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.105030] r8169 0000:01:00.0: eth0: link up
[ 18.105488] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 20.069936] type=1400 audit(1373210823.496:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=979 comm="apparmor_parser"
[ 20.070195] type=1400 audit(1373210823.496:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=979 comm="apparmor_parser"
[ 20.070335] type=1400 audit(1373210823.496:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=979 comm="apparmor_parser"
[ 20.072229] type=1400 audit(1373210823.496:13): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=983 comm="apparmor_parser"
[ 20.072517] type=1400 audit(1373210823.496:14): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=983 comm="apparmor_parser"
[ 20.098847] type=1400 audit(1373210823.524:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=978 comm="apparmor_parser"
[ 20.106266] type=1400 audit(1373210823.532:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=985 comm="apparmor_parser"
[ 20.132824] type=1400 audit(1373210823.556:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=982 comm="apparmor_parser"
[ 20.133138] type=1400 audit(1373210823.556:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=982 comm="apparmor_parser"
[ 20.154196] type=1400 audit(1373210823.580:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=980 comm="apparmor_parser"
[ 20.424503] init: alsa-restore main process (1018) terminated with status 99
[ 28.195442] audit_printk_skb: 21 callbacks suppressed
[ 28.195444] type=1400 audit(1373210831.636:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=891 comm="cupsd" pid=891 comm="cupsd" capability=36 capname="block_suspend"
[ 54.583500] type=1400 audit(1373210858.062:28): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1893 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 332.442587] type=1400 audit(1373211136.307:29): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=891 comm="cupsd" pid=891 comm="cupsd" capability=36 capname="block_suspend"
[ 455.076241] init: anacron main process (1047) killed by TERM signal
[ 1032.115496] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[ 1032.115510] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8802438db258), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 1032.115525] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8802438dbaf0), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 1033.439769] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[ 1033.439782] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8802438db258), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 1033.439798] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8802438dbaf0), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 1034.181935] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[ 1034.181947] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8802438db258), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 1034.181962] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8802438dbaf0), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 1039.436935] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[ 1039.436953] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8802438db258), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 1039.436975] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8802438dbaf0), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 1044.226718] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[ 1044.226726] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8802438db258), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 1044.226737] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8802438dbaf0), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 1051.205430] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[ 1051.205443] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8802438db258), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 1051.205458] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8802438dbaf0), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 1051.450514] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[ 1051.450527] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8802438db258), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 1051.450543] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8802438dbaf0), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 1051.643202] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20120320/dsopcode-236)
[ 1051.643215] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8802438db258), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 1051.643231] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff8802438dbaf0), AE_AML_BUFFER_LIMIT (20120320/psparse-536)
[ 1184.231701] type=1400 audit(1373211989.363:30): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=891 comm="cupsd" pid=891 comm="cupsd" capability=36 capname="block_suspend"
Last edited by samyakd; July 7th, 2013 at 05:21 PM.
Ubuntu Member
What does this tell us?Hp laptop. 12.04 UEFI. No wireless.Code:lspci -nn | grep 0280
"Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, B.Sc., M.Sc., M.A., Ph.D., Sc.D.
Spilled the Beans
02:00.0 Network controller [0280]: Ralink corp. Device [1814:3290]
Ubuntu Member
Yes, because you don't have an Intel wireless card, you have a Ralink.dmesg | grep iwl doesnt show anything.
Your device is supported by default in Ubuntu 13.04. Would you rather upgrade or would you rather go through the tricky process of compiling the driver from scratch? Post #13 here gives the compile procedure. http://ubuntuforums.org/showthread.p...ight=rt3290sta You will also need to install build-essential and linux-headers-generic.
"Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, B.Sc., M.Sc., M.A., Ph.D., Sc.D.
Spilled the Beans
Damn.! Installing this 12.04 version was itself a headache for me with this new UEFI system and pre-installed windows 8. Upgrade would require the whole process to be repeated. Compiling is the way to go.! I might learn something on my way.! By the way, how do you guys know of all these things, man? Kudos.!
Ubuntu Member
I know all these things because I love what I do and, having done it for quite a few years, by now I can almost smell the solution! The pci.id, in your case 1814:3290, and Google will tell you more than you ever wanted to know. https://www.google.com/search?source...le.cRGM9j4Phhg
Do you need a step-by-step or can you proceed based on the linked instructions?
"Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, B.Sc., M.Sc., M.A., Ph.D., Sc.D.
Spilled the Beans
I did what was told in that post. But now, when I log in to the system and use my laptop for sometime (with wireless on and connected) I get a black screen showing kernel panic - not syncing : Fatal exception in interrupt. I ran a google search but couldn't get any substance out of them. Its been reported as a bug but the place where its solved, its just for that particular user. I wonder if this panic is in any way related to my new wireless driver.
Posting Permissions
Adv Reply
Bookmarks