Results 1 to 4 of 4

Thread: mounting problem - group descriptors corrupted

  1. #1
    Join Date
    Aug 2012
    Beans
    4

    mounting problem - group descriptors corrupted

    Hi there,

    I have a problem when trying to mount a Truecrypt volume.
    When I ran the mounting command(of Truecrypt) it returns:
    mount: wrong fs type, bad option, bad superblock on /dev/mapper/truecrypt2,
    missing codepage or helper program, or other error
    In some cases useful info is found in syslog - try
    dmesg | tail or so

    and dmesg:
    [ 3870.885825] EXT3-fs error (device dm-0): ext3_check_descriptors: Block bitmap for group 1152 not in group (block 2701169)!
    [ 3870.885982] EXT3-fs (dm-0): error: group descriptors corrupted

    I have tried to run 'fsck /dev/sdb' which gives:
    fsck from util-linux 2.19.1
    e2fsck 1.41.14 (22-Dec-2010)
    fsck.ext2: Superblock invalid, trying backup blocks...
    fsck.ext2: Bad magic number in super-block while trying to open /dev/sdb

    The superblock could not be read or does not describe a correct ext2
    filesystem. If the device is valid and it really contains an ext2
    filesystem (and not swap or ufs or something else), then the superblock
    is corrupt, and you might try running e2fsck with an alternate superblock:
    e2fsck -b 8193 <device&gt;

    and e2fsck does not work with any block number.

    Could you help me with that? I have some important stuff in the disk !

  2. #2
    Join Date
    Aug 2012
    Beans
    4

    Re: mounting problem - group descriptors corrupted

    please ?

  3. #3
    Join Date
    Aug 2012
    Beans
    4

    Re: mounting problem - group descriptors corrupted

    does anyone know?

  4. #4
    Join Date
    Sep 2012
    Location
    Cardiff, UK
    Beans
    53
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: mounting problem - group descriptors corrupted

    Hi,

    I think you are going along the correct path in trying to do an fsck on the disk, but I believe the parameters are wrong. The drive that the information is on looks to be an LVM volume, and you are trying to check a filesystem on the actual physical disk.

    From dmesg, it looks like the device you need to check is actually /dev/dm-0 or similar. If you post the output to 'ls /dev' I may be able to confirm this.

    Also, if the data was not on an LVM but a physical disk, you'd need to fsck something like /dev/sda1, which is the filesystem mount point, not /dev/sda, which is the physical disk device mount point.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •