This is the keys are loaded via the /etc/rc.local file.
Code:
cat /etc/rc_keymaps/rc6_mce
# table rc6_mce, type: NEC
0x77e15094 KEY_UP
0x77e13094 KEY_DOWN
0x77e19094 KEY_LEFT
0x77e16094 KEY_RIGHT
0x77e1a094 KEY_PLAY
0x77e1c094 KEY_MENU
I know it's loaded because the -t parameter works for the tests, and the -r parameter shows the right button mapping.
Code:
ir-keytable -r
scancode 0x77e13094 = KEY_DOWN (0x6c)
scancode 0x77e15094 = KEY_UP (0x67)
scancode 0x77e16094 = KEY_RIGHT (0x6a)
scancode 0x77e19094 = KEY_LEFT (0x69)
scancode 0x77e1a094 = KEY_PLAY (0xcf)
scancode 0x77e1c094 = KEY_MENU (0x8b)
Enabled protocols: NEC
In the test, if I press the left button it says KEY_LEFT, but inside XBMC if I press the left button, nothing happens.
Bookmarks