Code:
[ 19709.681]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 19709.682] X Protocol Version 11, Revision 0
[ 19709.682] Build Operating System: Linux 2.6.24-28-server i686 Ubuntu
[ 19709.682] Current Operating System: Linux probook 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686
[ 19709.682] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=846c2273-e3f1-4e5d-b501-6ea7513a99b1 ro vga=792
[ 19709.682] Build Date: 13 October 2011 05:38:22PM
[ 19709.682] xorg-server 2:1.10.1-1ubuntu1.3 (For technical support please see http://www.ubuntu.com/support)
[ 19709.682] Current version of pixman: 0.20.2
[ 19709.682] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 19709.682] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19709.682] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 1 22:24:32 2012
[ 19709.682] (==) Using config file: "/etc/X11/xorg.conf"
[ 19709.682] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19709.811] (==) ServerLayout "X.org Configured"
[ 19709.811] (**) |-->Screen "Screen0" (0)
[ 19709.811] (**) | |-->Monitor "Monitor0"
[ 19709.811] (**) | |-->Device "Card0"
[ 19709.811] (**) |-->Screen "Screen1" (1)
[ 19709.811] (**) | |-->Monitor "Monitor1"
[ 19709.811] (**) | |-->Device "Card1"
[ 19709.811] (**) |-->Screen "Screen2" (2)
[ 19709.811] (**) | |-->Monitor "Monitor2"
[ 19709.812] (**) | |-->Device "Card2"
[ 19709.812] (**) |-->Input Device "Mouse0"
[ 19709.812] (**) |-->Input Device "Keyboard0"
[ 19709.812] (==) Automatically adding devices
[ 19709.812] (==) Automatically enabling devices
[ 19709.812] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 19709.812] Entry deleted from font path.
[ 19709.812] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 19709.812] Entry deleted from font path.
[ 19709.812] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 19709.812] Entry deleted from font path.
[ 19709.812] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 19709.812] Entry deleted from font path.
[ 19709.812] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 19709.812] Entry deleted from font path.
[ 19709.812] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 19709.812] Entry deleted from font path.
[ 19709.813] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 19709.813] Entry deleted from font path.
[ 19709.813] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 19709.813] Entry deleted from font path.
[ 19709.813] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 19709.813] Entry deleted from font path.
[ 19709.813] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 19709.813] Entry deleted from font path.
[ 19709.813] (**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 19709.813] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 19709.813] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 19709.813] (WW) Disabling Mouse0
[ 19709.813] (WW) Disabling Keyboard0
[ 19709.813] (II) Loader magic: 0x8200ac0
[ 19709.813] (II) Module ABI versions:
[ 19709.813] X.Org ANSI C Emulation: 0.4
[ 19709.813] X.Org Video Driver: 10.0
[ 19709.813] X.Org XInput driver : 12.3
[ 19709.813] X.Org Server Extension : 5.0
[ 19709.814] (--) PCI:*(0:0:2:0) 8086:2a42:103c:3072 rev 7, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00007120/8
[ 19709.814] (--) PCI: (0:0:2:1) 8086:2a43:103c:3072 rev 7, Mem @ 0x90400000/1048576
[ 19709.814] (II) Open ACPI successful (/var/run/acpid.socket)
[ 19709.814] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 19709.814] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 19709.814] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 19709.814] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 19709.814] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 19709.814] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 19709.814] (II) LoadModule: "dri2"
[ 19709.815] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 19709.872] (II) Module dri2: vendor="X.Org Foundation"
[ 19709.872] compiled for 1.10.1, module version = 1.2.0
[ 19709.872] ABI class: X.Org Server Extension, version 5.0
[ 19709.872] (II) Loading extension DRI2
[ 19709.872] (II) LoadModule: "record"
[ 19709.872] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 19709.882] (II) Module record: vendor="X.Org Foundation"
[ 19709.882] compiled for 1.10.1, module version = 1.13.0
[ 19709.882] Module class: X.Org Server Extension
[ 19709.882] ABI class: X.Org Server Extension, version 5.0
[ 19709.882] (II) Loading extension RECORD
[ 19709.882] (II) LoadModule: "glx"
[ 19709.882] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 19709.895] (II) Module glx: vendor="X.Org Foundation"
[ 19709.895] compiled for 1.10.1, module version = 1.0.0
[ 19709.895] ABI class: X.Org Server Extension, version 5.0
[ 19709.895] (==) AIGLX enabled
[ 19709.895] (II) Loading extension GLX
[ 19709.896] (II) LoadModule: "dri"
[ 19709.896] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 19709.902] (II) Module dri: vendor="X.Org Foundation"
[ 19709.902] compiled for 1.10.1, module version = 1.0.0
[ 19709.902] ABI class: X.Org Server Extension, version 5.0
[ 19709.902] (II) Loading extension XFree86-DRI
[ 19709.902] (II) LoadModule: "dbe"
[ 19709.902] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 19709.902] (II) Module dbe: vendor="X.Org Foundation"
[ 19709.902] compiled for 1.10.1, module version = 1.0.0
[ 19709.902] Module class: X.Org Server Extension
[ 19709.902] ABI class: X.Org Server Extension, version 5.0
[ 19709.902] (II) Loading extension DOUBLE-BUFFER
[ 19709.902] (II) LoadModule: "extmod"
[ 19709.903] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 19709.907] (II) Module extmod: vendor="X.Org Foundation"
[ 19709.907] compiled for 1.10.1, module version = 1.0.0
[ 19709.908] Module class: X.Org Server Extension
[ 19709.908] ABI class: X.Org Server Extension, version 5.0
[ 19709.908] (II) Loading extension MIT-SCREEN-SAVER
[ 19709.908] (II) Loading extension XFree86-VidModeExtension
[ 19709.908] (II) Loading extension XFree86-DGA
[ 19709.908] (II) Loading extension DPMS
[ 19709.908] (II) Loading extension XVideo
[ 19709.908] (II) Loading extension XVideo-MotionCompensation
[ 19709.908] (II) Loading extension X-Resource
[ 19709.908] (II) LoadModule: "intel"
[ 19709.908] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 19709.940] (II) Module intel: vendor="X.Org Foundation"
[ 19709.940] compiled for 1.10.1, module version = 2.14.0
[ 19709.940] Module class: X.Org Video Driver
[ 19709.940] ABI class: X.Org Video Driver, version 10.0
[ 19709.940] (II) LoadModule: "fbdev"
[ 19709.940] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 19709.960] (II) Module fbdev: vendor="X.Org Foundation"
[ 19709.960] compiled for 1.10.0, module version = 0.4.2
[ 19709.960] ABI class: X.Org Video Driver, version 10.0
[ 19709.960] (II) LoadModule: "vesa"
[ 19709.960] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 19709.968] (II) Module vesa: vendor="X.Org Foundation"
[ 19709.968] compiled for 1.10.0, module version = 2.3.0
[ 19709.968] Module class: X.Org Video Driver
[ 19709.968] ABI class: X.Org Video Driver, version 10.0
[ 19709.968] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 19709.969] (II) FBDEV: driver for framebuffer: fbdev
[ 19709.969] (II) VESA: driver for VESA chipsets: vesa
[ 19709.969] (--) using VT number 8
[ 19710.047] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 19710.047] (WW) Falling back to old probe method for fbdev
[ 19710.047] (II) Loading sub module "fbdevhw"
[ 19710.047] (II) LoadModule: "fbdevhw"
[ 19710.048] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 19710.057] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 19710.057] compiled for 1.10.1, module version = 0.0.2
[ 19710.057] ABI class: X.Org Video Driver, version 10.0
[ 19710.057] (WW) Falling back to old probe method for vesa
[ 19710.057] drmOpenDevice: node name is /dev/dri/card0
[ 19710.057] drmOpenDevice: open result is 9, (OK)
[ 19710.057] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 19710.058] drmOpenDevice: node name is /dev/dri/card0
[ 19710.058] drmOpenDevice: open result is 9, (OK)
[ 19710.058] drmOpenByBusid: drmOpenMinor returns 9
[ 19710.058] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 19710.058] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 19710.058] (==) intel(0): RGB weight 888
[ 19710.058] (==) intel(0): Default visual is TrueColor
[ 19710.058] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 19710.058] (--) intel(0): Chipset: "GM45"
[ 19710.058] (**) intel(0): Relaxed fencing enabled
[ 19710.058] (**) intel(0): Tiling enabled
[ 19710.058] (**) intel(0): SwapBuffers wait enabled
[ 19710.058] (==) intel(0): video overlay key set to 0x101fe
[ 19710.058] (II) intel(0): Output LVDS1 using monitor section Monitor0
[ 19710.058] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 19710.080] (II) intel(0): Output VGA1 has no monitor section
[ 19710.084] (II) intel(0): Output HDMI1 has no monitor section
[ 19710.084] (II) intel(0): Output DP1 has no monitor section
[ 19710.085] (II) intel(0): Output DP2 has no monitor section
[ 19710.312] (II) intel(0): Output TV1 has no monitor section
[ 19710.312] (II) intel(0): EDID for output LVDS1
[ 19710.312] (II) intel(0): Manufacturer: CMO Model: 1571 Serial#: 0
[ 19710.312] (II) intel(0): Year: 2008 Week: 36
[ 19710.312] (II) intel(0): EDID Version: 1.3
[ 19710.312] (II) intel(0): Digital Display Input
[ 19710.312] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 19710.312] (II) intel(0): Gamma: 2.20
[ 19710.312] (II) intel(0): No DPMS capabilities specified
[ 19710.312] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 19710.312] (II) intel(0): First detailed timing is preferred mode
[ 19710.312] (II) intel(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
[ 19710.312] (II) intel(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 19710.312] (II) intel(0): Manufacturer's mask: 0
[ 19710.312] (II) intel(0): Supported detailed timing:
[ 19710.312] (II) intel(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 19710.313] (II) intel(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 19710.313] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 19710.313] (II) intel(0): N156B6-L04
[ 19710.313] (II) intel(0): CMO
[ 19710.313] (II) intel(0): N156B6-L04
[ 19710.313] (II) intel(0): EDID (in hex):
[ 19710.313] (II) intel(0): 00ffffffffffff000daf711500000000
[ 19710.313] (II) intel(0): 24120103802313780a07f59a574e8726
[ 19710.313] (II) intel(0): 1e505400000001010101010101010101
[ 19710.313] (II) intel(0): 010101010101121b5664500014301022
[ 19710.313] (II) intel(0): 260058c110000018000000fe004e3135
[ 19710.313] (II) intel(0): 3642362d4c30340a2020000000fe0043
[ 19710.313] (II) intel(0): 4d4f0a202020202020202020000000fe
[ 19710.313] (II) intel(0): 004e31353642362d4c30340a2020006f
[ 19710.313] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 19710.313] (II) intel(0): Printing DDC gathered Modelines:
[ 19710.313] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 19710.313] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 19710.313] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 19710.313] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 19710.313] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 19710.313] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 19710.313] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 19710.313] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 19710.314] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 19710.314] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 19710.314] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 19710.314] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 19710.314] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 19710.314] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 19710.314] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 19710.314] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 19710.314] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 19710.314] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 19710.314] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 19710.314] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 19710.314] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 19710.314] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 19710.314] (II) intel(0): Printing probed modes for output LVDS1
[ 19710.314] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 19710.314] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 19710.314] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 19710.314] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 19710.314] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 19710.314] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 19710.314] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 19710.336] (II) intel(0): EDID for output VGA1
[ 19710.340] (II) intel(0): EDID for output HDMI1
[ 19710.340] (II) intel(0): EDID for output DP1
[ 19710.341] (II) intel(0): EDID for output DP2
[ 19710.488] (II) intel(0): EDID for output TV1
[ 19710.488] (II) intel(0): Output LVDS1 connected
[ 19710.488] (II) intel(0): Output VGA1 disconnected
[ 19710.488] (II) intel(0): Output HDMI1 disconnected
[ 19710.488] (II) intel(0): Output DP1 disconnected
[ 19710.488] (II) intel(0): Output DP2 disconnected
[ 19710.488] (II) intel(0): Output TV1 disconnected
[ 19710.488] (II) intel(0): Using exact sizes for initial modes
[ 19710.488] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 19710.488] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 19710.488] (II) intel(0): Kernel page flipping support detected, enabling
[ 19710.488] (**) intel(0): Display dimensions: (350, 190) mm
[ 19710.488] (**) intel(0): DPI set to (99, 102)
[ 19710.488] (II) Loading sub module "fb"
[ 19710.488] (II) LoadModule: "fb"
[ 19710.488] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 19710.602] (II) Module fb: vendor="X.Org Foundation"
[ 19710.602] compiled for 1.10.1, module version = 1.0.0
[ 19710.602] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19710.602] (II) UnloadModule: "fbdev"
[ 19710.602] (II) Unloading fbdev
[ 19710.602] (II) UnloadModule: "fbdevhw"
[ 19710.602] (II) Unloading fbdevhw
[ 19710.602] (II) UnloadModule: "vesa"
[ 19710.602] (II) Unloading vesa
[ 19710.602] (==) Depth 24 pixmap format is 32 bpp
[ 19710.602] (==) intel(0): VideoRam: 262144 KB
[ 19710.602] (II) intel(0): [DRI2] Setup complete
[ 19710.602] (II) intel(0): [DRI2] DRI driver: i965
[ 19710.602] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 19710.617] (II) UXA(0): Driver registered support for the following operations:
[ 19710.617] (II) solid
[ 19710.617] (II) copy
[ 19710.617] (II) composite (RENDER acceleration)
[ 19710.617] (II) put_image
[ 19710.617] (II) get_image
[ 19710.617] (==) intel(0): Backing store disabled
[ 19710.617] (==) intel(0): Silken mouse enabled
[ 19710.617] (II) intel(0): Initializing HW Cursor
[ 19710.644] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 19710.645] (==) intel(0): DPMS enabled
[ 19710.645] (==) intel(0): Intel XvMC decoder enabled
[ 19710.645] (II) intel(0): Set up textured video
[ 19710.645] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 19710.645] (II) intel(0): direct rendering: DRI2 Enabled
[ 19710.645] (WW) intel(0): Option "ForceEnablePipeA" is not used
[ 19710.645] (WW) intel(0): Option "monitor-TV" is not used
[ 19710.645] (==) intel(0): hotplug detection: "enabled"
[ 19710.645] (--) RandR disabled
[ 19710.645] (II) Initializing built-in extension Generic Event Extension
[ 19710.645] (II) Initializing built-in extension SHAPE
[ 19710.645] (II) Initializing built-in extension MIT-SHM
[ 19710.645] (II) Initializing built-in extension XInputExtension
[ 19710.645] (II) Initializing built-in extension XTEST
[ 19710.645] (II) Initializing built-in extension BIG-REQUESTS
[ 19710.645] (II) Initializing built-in extension SYNC
[ 19710.645] (II) Initializing built-in extension XKEYBOARD
[ 19710.645] (II) Initializing built-in extension XC-MISC
[ 19710.645] (II) Initializing built-in extension SECURITY
[ 19710.645] (II) Initializing built-in extension XINERAMA
[ 19710.645] (II) Initializing built-in extension XFIXES
[ 19710.645] (II) Initializing built-in extension RENDER
[ 19710.645] (II) Initializing built-in extension RANDR
[ 19710.645] (II) Initializing built-in extension COMPOSITE
[ 19710.645] (II) Initializing built-in extension DAMAGE
[ 19710.645] (II) Initializing built-in extension GESTURE
[ 19710.662] (II) AIGLX: Trying DRI driver /usr/lib/dri/i965_dri.so
[ 19710.692] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 19710.692] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 19710.692] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 19710.692] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 19710.692] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 19710.692] (II) AIGLX: Loaded and initialized i965
[ 19710.692] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 19710.693] (II) intel(0): Setting screen physical size to 361 x 203
[ 19710.771] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 19710.802] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 19710.802] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 19710.802] (II) LoadModule: "evdev"
[ 19710.803] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19710.851] (II) Module evdev: vendor="X.Org Foundation"
[ 19710.851] compiled for 1.10.0.902, module version = 2.6.0
[ 19710.851] Module class: X.Org XInput Driver
[ 19710.851] ABI class: X.Org XInput driver, version 12.3
[ 19710.851] (II) Using input driver 'evdev' for 'Power Button'
[ 19710.851] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19710.851] (**) Power Button: always reports core events
[ 19710.851] (**) Power Button: Device: "/dev/input/event2"
[ 19710.851] (--) Power Button: Found keys
[ 19710.851] (II) Power Button: Configuring as keyboard
[ 19710.851] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 19710.851] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 19710.851] (**) Option "xkb_rules" "evdev"
[ 19710.851] (**) Option "xkb_model" "pc105"
[ 19710.851] (**) Option "xkb_layout" "us"
[ 19710.853] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 19710.853] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 19710.853] (II) Using input driver 'evdev' for 'Video Bus'
[ 19710.853] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19710.853] (**) Video Bus: always reports core events
[ 19710.853] (**) Video Bus: Device: "/dev/input/event5"
[ 19710.856] (--) Video Bus: Found keys
[ 19710.856] (II) Video Bus: Configuring as keyboard
[ 19710.856] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5/event5"
[ 19710.856] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 19710.856] (**) Option "xkb_rules" "evdev"
[ 19710.856] (**) Option "xkb_model" "pc105"
[ 19710.856] (**) Option "xkb_layout" "us"
[ 19710.865] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 19710.865] (II) No input driver/identifier specified (ignoring)
[ 19710.865] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 19710.865] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 19710.865] (II) Using input driver 'evdev' for 'Sleep Button'
[ 19710.865] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19710.865] (**) Sleep Button: always reports core events
[ 19710.865] (**) Sleep Button: Device: "/dev/input/event0"
[ 19710.865] (--) Sleep Button: Found keys
[ 19710.865] (II) Sleep Button: Configuring as keyboard
[ 19710.865] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0/event0"
[ 19710.866] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 19710.866] (**) Option "xkb_rules" "evdev"
[ 19710.866] (**) Option "xkb_model" "pc105"
[ 19710.866] (**) Option "xkb_layout" "us"
[ 19710.872] (II) config/udev: Adding input device USB LaserStream(TM) Mouse (/dev/input/event4)
[ 19710.872] (**) USB LaserStream(TM) Mouse: Applying InputClass "evdev pointer catchall"
[ 19710.872] (II) Using input driver 'evdev' for 'USB LaserStream(TM) Mouse'
[ 19710.872] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19710.872] (**) USB LaserStream(TM) Mouse: always reports core events
[ 19710.872] (**) USB LaserStream(TM) Mouse: Device: "/dev/input/event4"
[ 19710.873] (--) USB LaserStream(TM) Mouse: Found 9 mouse buttons
[ 19710.873] (--) USB LaserStream(TM) Mouse: Found scroll wheel(s)
[ 19710.873] (--) USB LaserStream(TM) Mouse: Found relative axes
[ 19710.873] (--) USB LaserStream(TM) Mouse: Found x and y relative axes
[ 19710.873] (II) USB LaserStream(TM) Mouse: Configuring as mouse
[ 19710.873] (II) USB LaserStream(TM) Mouse: Adding scrollwheel support
[ 19710.873] (**) USB LaserStream(TM) Mouse: YAxisMapping: buttons 4 and 5
[ 19710.873] (**) USB LaserStream(TM) Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 19710.873] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input9/event4"
[ 19710.873] (II) XINPUT: Adding extended input device "USB LaserStream(TM) Mouse" (type: MOUSE)
[ 19710.873] (II) USB LaserStream(TM) Mouse: initialized for relative axes.
[ 19710.873] (**) USB LaserStream(TM) Mouse: (accel) keeping acceleration scheme 1
[ 19710.873] (**) USB LaserStream(TM) Mouse: (accel) acceleration profile 0
[ 19710.873] (**) USB LaserStream(TM) Mouse: (accel) acceleration factor: 2.000
[ 19710.873] (**) USB LaserStream(TM) Mouse: (accel) acceleration threshold: 4
[ 19710.873] (II) config/udev: Adding input device USB LaserStream(TM) Mouse (/dev/input/mouse0)
[ 19710.873] (II) No input driver/identifier specified (ignoring)
[ 19710.890] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 19710.890] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 19710.891] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 19710.891] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19710.891] (**) AT Translated Set 2 keyboard: always reports core events
[ 19710.891] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 19710.892] (--) AT Translated Set 2 keyboard: Found keys
[ 19710.892] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 19710.892] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 19710.892] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 19710.892] (**) Option "xkb_rules" "evdev"
[ 19710.892] (**) Option "xkb_model" "pc105"
[ 19710.892] (**) Option "xkb_layout" "us"
[ 19710.893] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 19710.893] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 19710.893] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 19710.893] (II) LoadModule: "synaptics"
[ 19710.893] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 19710.905] (II) Module synaptics: vendor="X.Org Foundation"
[ 19710.905] compiled for 1.10.1, module version = 1.3.99
[ 19710.905] Module class: X.Org XInput Driver
[ 19710.905] ABI class: X.Org XInput driver, version 12.3
[ 19710.905] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 19710.905] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 19710.905] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 19710.905] (**) Option "Device" "/dev/input/event8"
[ 19710.912] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5692
[ 19710.912] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4680
[ 19710.912] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 19710.912] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 19710.912] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 19710.924] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 19710.924] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 19710.928] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event8"
[ 19710.928] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 19710.928] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 19710.928] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 19710.928] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 19710.928] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 19710.928] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 19710.928] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 19710.928] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 19710.937] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 19710.938] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 19710.938] (II) No input driver/identifier specified (ignoring)
[ 19710.938] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event6)
[ 19710.939] (II) No input driver/identifier specified (ignoring)
[ 19710.939] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 19710.939] (II) No input driver/identifier specified (ignoring)
[ 19710.950] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
[ 19710.950] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 19710.950] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 19710.950] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 19710.950] (**) HP WMI hotkeys: always reports core events
[ 19710.950] (**) HP WMI hotkeys: Device: "/dev/input/event7"
[ 19710.950] (--) HP WMI hotkeys: Found keys
[ 19710.950] (II) HP WMI hotkeys: Configuring as keyboard
[ 19710.950] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 19710.950] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[ 19710.950] (**) Option "xkb_rules" "evdev"
[ 19710.950] (**) Option "xkb_model" "pc105"
[ 19710.950] (**) Option "xkb_layout" "us"
[ 19711.684] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 19711.684] (II) intel(0): Printing DDC gathered Modelines:
[ 19711.684] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 19711.871] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 19711.871] (II) intel(0): Printing DDC gathered Modelines:
[ 19711.871] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 19712.051] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 19712.051] (II) intel(0): Printing DDC gathered Modelines:
[ 19712.051] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 19712.230] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 19712.230] (II) intel(0): Printing DDC gathered Modelines:
[ 19712.230] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 19721.120] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 19722.261] (II) Open ACPI successful (/var/run/acpid.socket)
[ 19722.262] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 19722.280] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 19722.280] (II) intel(0): Printing DDC gathered Modelines:
[ 19722.280] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 19722.484] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 19731.333] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 19731.334] (II) intel(0): Printing DDC gathered Modelines:
[ 19731.334] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 19731.595] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 19731.595] (II) intel(0): Printing DDC gathered Modelines:
[ 19731.595] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 19731.850] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 19731.850] (II) intel(0): Printing DDC gathered Modelines:
[ 19731.850] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 19731.981] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 19731.981] (II) intel(0): Printing DDC gathered Modelines:
[ 19731.981] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 19741.595] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 19741.595] (II) intel(0): Printing DDC gathered Modelines:
[ 19741.595] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 19741.781] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 19741.781] (II) intel(0): Printing DDC gathered Modelines:
[ 19741.781] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 19945.168] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 19960.775] (II) Open ACPI successful (/var/run/acpid.socket)
[ 19960.775] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 19960.792] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 19960.792] (II) intel(0): Printing DDC gathered Modelines:
[ 19960.792] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 19961.001] (--) SynPS/2 Synaptics TouchPad: touchpad found
And /var/log/Xorg.1.log:
Code:
[ 4446.683]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 4446.683] X Protocol Version 11, Revision 0
[ 4446.683] Build Operating System: Linux 2.6.24-28-server i686 Ubuntu
[ 4446.683] Current Operating System: Linux probook 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686
[ 4446.683] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=846c2273-e3f1-4e5d-b501-6ea7513a99b1 ro vga=792 splash quiet splash vt.handoff=7
[ 4446.683] Build Date: 13 October 2011 05:38:22PM
[ 4446.683] xorg-server 2:1.10.1-1ubuntu1.3 (For technical support please see http://www.ubuntu.com/support)
[ 4446.683] Current version of pixman: 0.20.2
[ 4446.683] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4446.683] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4446.683] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Nov 16 11:14:21 2011
[ 4446.683] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4446.684] (==) No Layout section. Using the first Screen section.
[ 4446.684] (==) No screen section available. Using defaults.
[ 4446.684] (**) |-->Screen "Default Screen Section" (0)
[ 4446.684] (**) | |-->Monitor "<default monitor>"
[ 4446.684] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4446.684] (==) Automatically adding devices
[ 4446.684] (==) Automatically enabling devices
[ 4446.684] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 4446.684] Entry deleted from font path.
[ 4446.684] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 4446.684] Entry deleted from font path.
[ 4446.684] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 4446.684] Entry deleted from font path.
[ 4446.684] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 4446.684] Entry deleted from font path.
[ 4446.684] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 4446.684] Entry deleted from font path.
[ 4446.685] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 4446.685] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 4446.685] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4446.685] (II) Loader magic: 0x8200ac0
[ 4446.685] (II) Module ABI versions:
[ 4446.685] X.Org ANSI C Emulation: 0.4
[ 4446.685] X.Org Video Driver: 10.0
[ 4446.685] X.Org XInput driver : 12.3
[ 4446.685] X.Org Server Extension : 5.0
[ 4446.686] (--) PCI:*(0:0:2:0) 8086:2a42:103c:3072 rev 7, Mem @ 0x90000000/4194304, 0x80000000/268435456, I/O @ 0x00007120/8
[ 4446.686] (--) PCI: (0:0:2:1) 8086:2a43:103c:3072 rev 7, Mem @ 0x90400000/1048576
[ 4446.686] (II) Open ACPI successful (/var/run/acpid.socket)
[ 4446.686] (II) LoadModule: "extmod"
[ 4446.686] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 4446.686] (II) Module extmod: vendor="X.Org Foundation"
[ 4446.686] compiled for 1.10.1, module version = 1.0.0
[ 4446.686] Module class: X.Org Server Extension
[ 4446.686] ABI class: X.Org Server Extension, version 5.0
[ 4446.686] (II) Loading extension MIT-SCREEN-SAVER
[ 4446.686] (II) Loading extension XFree86-VidModeExtension
[ 4446.687] (II) Loading extension XFree86-DGA
[ 4446.687] (II) Loading extension DPMS
[ 4446.687] (II) Loading extension XVideo
[ 4446.687] (II) Loading extension XVideo-MotionCompensation
[ 4446.687] (II) Loading extension X-Resource
[ 4446.687] (II) LoadModule: "dbe"
[ 4446.687] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 4446.687] (II) Module dbe: vendor="X.Org Foundation"
[ 4446.687] compiled for 1.10.1, module version = 1.0.0
[ 4446.687] Module class: X.Org Server Extension
[ 4446.687] ABI class: X.Org Server Extension, version 5.0
[ 4446.687] (II) Loading extension DOUBLE-BUFFER
[ 4446.687] (II) LoadModule: "glx"
[ 4446.687] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4446.687] (II) Module glx: vendor="X.Org Foundation"
[ 4446.687] compiled for 1.10.1, module version = 1.0.0
[ 4446.687] ABI class: X.Org Server Extension, version 5.0
[ 4446.687] (==) AIGLX enabled
[ 4446.687] (II) Loading extension GLX
[ 4446.687] (II) LoadModule: "record"
[ 4446.687] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 4446.687] (II) Module record: vendor="X.Org Foundation"
[ 4446.687] compiled for 1.10.1, module version = 1.13.0
[ 4446.688] Module class: X.Org Server Extension
[ 4446.688] ABI class: X.Org Server Extension, version 5.0
[ 4446.688] (II) Loading extension RECORD
[ 4446.688] (II) LoadModule: "dri"
[ 4446.688] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 4446.688] (II) Module dri: vendor="X.Org Foundation"
[ 4446.688] compiled for 1.10.1, module version = 1.0.0
[ 4446.688] ABI class: X.Org Server Extension, version 5.0
[ 4446.688] (II) Loading extension XFree86-DRI
[ 4446.688] (II) LoadModule: "dri2"
[ 4446.688] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 4446.688] (II) Module dri2: vendor="X.Org Foundation"
[ 4446.688] compiled for 1.10.1, module version = 1.2.0
[ 4446.688] ABI class: X.Org Server Extension, version 5.0
[ 4446.688] (II) Loading extension DRI2
[ 4446.688] (==) Matched intel as autoconfigured driver 0
[ 4446.688] (==) Matched vesa as autoconfigured driver 1
[ 4446.688] (==) Matched fbdev as autoconfigured driver 2
[ 4446.688] (==) Assigned the driver to the xf86ConfigLayout
[ 4446.688] (II) LoadModule: "intel"
[ 4446.689] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4446.689] (II) Module intel: vendor="X.Org Foundation"
[ 4446.689] compiled for 1.10.1, module version = 2.14.0
[ 4446.689] Module class: X.Org Video Driver
[ 4446.689] ABI class: X.Org Video Driver, version 10.0
[ 4446.689] (II) LoadModule: "vesa"
[ 4446.689] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 4446.690] (II) Module vesa: vendor="X.Org Foundation"
[ 4446.690] compiled for 1.10.0, module version = 2.3.0
[ 4446.690] Module class: X.Org Video Driver
[ 4446.690] ABI class: X.Org Video Driver, version 10.0
[ 4446.690] (II) LoadModule: "fbdev"
[ 4446.690] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 4446.690] (II) Module fbdev: vendor="X.Org Foundation"
[ 4446.690] compiled for 1.10.0, module version = 0.4.2
[ 4446.690] ABI class: X.Org Video Driver, version 10.0
[ 4446.690] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 4446.691] (II) VESA: driver for VESA chipsets: vesa
[ 4446.691] (II) FBDEV: driver for framebuffer: fbdev
[ 4446.691] (--) using VT number 8
[ 4446.844] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4446.844] (WW) Falling back to old probe method for vesa
[ 4446.844] (WW) Falling back to old probe method for fbdev
[ 4446.844] (II) Loading sub module "fbdevhw"
[ 4446.844] (II) LoadModule: "fbdevhw"
[ 4446.845] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 4446.845] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 4446.845] compiled for 1.10.1, module version = 0.0.2
[ 4446.845] ABI class: X.Org Video Driver, version 10.0
[ 4446.845] drmOpenDevice: node name is /dev/dri/card0
[ 4446.845] drmOpenDevice: open result is 9, (OK)
[ 4446.845] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 4446.845] drmOpenDevice: node name is /dev/dri/card0
[ 4446.845] drmOpenDevice: open result is 9, (OK)
[ 4446.845] drmOpenByBusid: drmOpenMinor returns 9
[ 4446.845] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 4446.845] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 4446.845] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 4446.845] (==) intel(0): RGB weight 888
[ 4446.845] (==) intel(0): Default visual is TrueColor
[ 4446.845] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 4446.845] (--) intel(0): Chipset: "GM45"
[ 4446.845] (**) intel(0): Relaxed fencing enabled
[ 4446.845] (**) intel(0): Tiling enabled
[ 4446.845] (**) intel(0): SwapBuffers wait enabled
[ 4446.845] (==) intel(0): video overlay key set to 0x101fe
[ 4446.846] (II) intel(0): Output LVDS1 has no monitor section
[ 4446.846] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 4446.868] (II) intel(0): Output VGA1 has no monitor section
[ 4446.874] (II) intel(0): Output HDMI1 has no monitor section
[ 4446.874] (II) intel(0): Output DP1 has no monitor section
[ 4446.875] (II) intel(0): Output DP2 has no monitor section
[ 4446.992] (II) intel(0): Output TV1 has no monitor section
[ 4446.992] (II) intel(0): EDID for output LVDS1
[ 4446.992] (II) intel(0): Manufacturer: CMO Model: 1571 Serial#: 0
[ 4446.992] (II) intel(0): Year: 2008 Week: 36
[ 4446.992] (II) intel(0): EDID Version: 1.3
[ 4446.992] (II) intel(0): Digital Display Input
[ 4446.992] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 4446.992] (II) intel(0): Gamma: 2.20
[ 4446.992] (II) intel(0): No DPMS capabilities specified
[ 4446.992] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 4446.992] (II) intel(0): First detailed timing is preferred mode
[ 4446.992] (II) intel(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
[ 4446.992] (II) intel(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 4446.992] (II) intel(0): Manufacturer's mask: 0
[ 4446.992] (II) intel(0): Supported detailed timing:
[ 4446.992] (II) intel(0): clock: 69.3 MHz Image Size: 344 x 193 mm
[ 4446.992] (II) intel(0): h_active: 1366 h_sync: 1382 h_sync_end 1416 h_blank_end 1466 h_border: 0
[ 4446.992] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 776 v_blanking: 788 v_border: 0
[ 4446.992] (II) intel(0): N156B6-L04
[ 4446.992] (II) intel(0): CMO
[ 4446.992] (II) intel(0): N156B6-L04
[ 4446.992] (II) intel(0): EDID (in hex):
[ 4446.992] (II) intel(0): 00ffffffffffff000daf711500000000
[ 4446.992] (II) intel(0): 24120103802313780a07f59a574e8726
[ 4446.992] (II) intel(0): 1e505400000001010101010101010101
[ 4446.992] (II) intel(0): 010101010101121b5664500014301022
[ 4446.992] (II) intel(0): 260058c110000018000000fe004e3135
[ 4446.992] (II) intel(0): 3642362d4c30340a2020000000fe0043
[ 4446.992] (II) intel(0): 4d4f0a202020202020202020000000fe
[ 4446.992] (II) intel(0): 004e31353642362d4c30340a2020006f
[ 4446.992] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 4446.992] (II) intel(0): Printing DDC gathered Modelines:
[ 4446.992] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 4446.993] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 4446.993] (II) intel(0): Printing probed modes for output LVDS1
[ 4446.993] (II) intel(0): Modeline "1366x768"x60.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 4446.993] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 4446.993] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 4446.993] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 4446.993] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 4446.993] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 4446.993] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 4447.016] (II) intel(0): EDID for output VGA1
[ 4447.020] (II) intel(0): EDID for output HDMI1
[ 4447.020] (II) intel(0): EDID for output DP1
[ 4447.021] (II) intel(0): EDID for output DP2
[ 4447.164] (II) intel(0): EDID for output TV1
[ 4447.164] (II) intel(0): Printing probed modes for output TV1
[ 4447.164] (II) intel(0): Modeline "848x480"x30.0 14.51 848 849 912 944 480 481 512 513 (15.4 kHz)
[ 4447.164] (II) intel(0): Modeline "640x480"x30.0 11.31 640 641 704 736 480 481 512 513 (15.4 kHz)
[ 4447.164] (II) intel(0): Modeline "1024x768"x30.0 26.89 1024 1025 1088 1120 768 769 800 801 (24.0 kHz)
[ 4447.164] (II) intel(0): Modeline "800x600"x30.0 17.00 800 801 864 896 600 601 632 633 (19.0 kHz)
[ 4447.164] (II) intel(0): Output LVDS1 connected
[ 4447.164] (II) intel(0): Output VGA1 disconnected
[ 4447.164] (II) intel(0): Output HDMI1 disconnected
[ 4447.164] (II) intel(0): Output DP1 disconnected
[ 4447.164] (II) intel(0): Output DP2 disconnected
[ 4447.164] (II) intel(0): Output TV1 connected
[ 4447.164] (II) intel(0): Using fuzzy aspect match for initial modes
[ 4447.164] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 4447.164] (II) intel(0): Output TV1 using initial mode 1024x768
[ 4447.164] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 4447.164] (II) intel(0): Kernel page flipping support detected, enabling
[ 4447.164] (**) intel(0): Display dimensions: (350, 190) mm
[ 4447.165] (**) intel(0): DPI set to (74, 102)
[ 4447.165] (II) Loading sub module "fb"
[ 4447.165] (II) LoadModule: "fb"
[ 4447.165] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 4447.165] (II) Module fb: vendor="X.Org Foundation"
[ 4447.165] compiled for 1.10.1, module version = 1.0.0
[ 4447.165] ABI class: X.Org ANSI C Emulation, version 0.4
[ 4447.165] (II) UnloadModule: "vesa"
[ 4447.165] (II) Unloading vesa
[ 4447.165] (II) UnloadModule: "fbdev"
[ 4447.166] (II) Unloading fbdev
[ 4447.166] (II) UnloadModule: "fbdevhw"
[ 4447.166] (II) Unloading fbdevhw
[ 4447.166] (==) Depth 24 pixmap format is 32 bpp
[ 4447.166] (==) intel(0): VideoRam: 262144 KB
[ 4447.166] (II) intel(0): [DRI2] Setup complete
[ 4447.166] (II) intel(0): [DRI2] DRI driver: i965
[ 4447.166] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 4447.187] (II) UXA(0): Driver registered support for the following operations:
[ 4447.187] (II) solid
[ 4447.187] (II) copy
[ 4447.187] (II) composite (RENDER acceleration)
[ 4447.187] (II) put_image
[ 4447.187] (II) get_image
[ 4447.187] (==) intel(0): Backing store disabled
[ 4447.188] (==) intel(0): Silken mouse enabled
[ 4447.188] (II) intel(0): Initializing HW Cursor
[ 4447.580] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 4447.581] (==) intel(0): DPMS enabled
[ 4447.581] (==) intel(0): Intel XvMC decoder enabled
[ 4447.581] (II) intel(0): Set up textured video
[ 4447.581] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 4447.581] (II) intel(0): direct rendering: DRI2 Enabled
[ 4447.581] (==) intel(0): hotplug detection: "enabled"
[ 4447.581] (--) RandR disabled
[ 4447.581] (II) Initializing built-in extension Generic Event Extension
[ 4447.581] (II) Initializing built-in extension SHAPE
[ 4447.581] (II) Initializing built-in extension MIT-SHM
[ 4447.581] (II) Initializing built-in extension XInputExtension
[ 4447.581] (II) Initializing built-in extension XTEST
[ 4447.581] (II) Initializing built-in extension BIG-REQUESTS
[ 4447.581] (II) Initializing built-in extension SYNC
[ 4447.581] (II) Initializing built-in extension XKEYBOARD
[ 4447.581] (II) Initializing built-in extension XC-MISC
[ 4447.581] (II) Initializing built-in extension SECURITY
[ 4447.581] (II) Initializing built-in extension XINERAMA
[ 4447.581] (II) Initializing built-in extension XFIXES
[ 4447.581] (II) Initializing built-in extension RENDER
[ 4447.581] (II) Initializing built-in extension RANDR
[ 4447.581] (II) Initializing built-in extension COMPOSITE
[ 4447.581] (II) Initializing built-in extension DAMAGE
[ 4447.581] (II) Initializing built-in extension GESTURE
[ 4447.593] (II) AIGLX: Trying DRI driver /usr/lib/dri/i965_dri.so
[ 4447.596] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 4447.596] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 4447.596] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 4447.596] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 4447.596] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 4447.596] (II) AIGLX: Loaded and initialized i965
[ 4447.596] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 4447.597] (II) intel(0): Setting screen physical size to 270 x 203
[ 4447.613] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 4447.628] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 4447.628] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 4447.628] (II) LoadModule: "evdev"
[ 4447.628] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4447.629] (II) Module evdev: vendor="X.Org Foundation"
[ 4447.629] compiled for 1.10.0.902, module version = 2.6.0
[ 4447.629] Module class: X.Org XInput Driver
[ 4447.629] ABI class: X.Org XInput driver, version 12.3
[ 4447.629] (II) Using input driver 'evdev' for 'Power Button'
[ 4447.629] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4447.629] (**) Power Button: always reports core events
[ 4447.629] (**) Power Button: Device: "/dev/input/event2"
[ 4447.629] (--) Power Button: Found keys
[ 4447.629] (II) Power Button: Configuring as keyboard
[ 4447.629] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 4447.629] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 4447.629] (**) Option "xkb_rules" "evdev"
[ 4447.629] (**) Option "xkb_model" "pc105"
[ 4447.629] (**) Option "xkb_layout" "us"
[ 4447.630] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 4447.631] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 4447.631] (II) Using input driver 'evdev' for 'Video Bus'
[ 4447.631] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4447.631] (**) Video Bus: always reports core events
[ 4447.631] (**) Video Bus: Device: "/dev/input/event4"
[ 4447.636] (--) Video Bus: Found keys
[ 4447.636] (II) Video Bus: Configuring as keyboard
[ 4447.636] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[ 4447.636] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 4447.636] (**) Option "xkb_rules" "evdev"
[ 4447.636] (**) Option "xkb_model" "pc105"
[ 4447.636] (**) Option "xkb_layout" "us"
[ 4447.642] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 4447.642] (II) No input driver/identifier specified (ignoring)
[ 4447.643] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[ 4447.643] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 4447.643] (II) Using input driver 'evdev' for 'Sleep Button'
[ 4447.643] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4447.643] (**) Sleep Button: always reports core events
[ 4447.643] (**) Sleep Button: Device: "/dev/input/event0"
[ 4447.643] (--) Sleep Button: Found keys
[ 4447.643] (II) Sleep Button: Configuring as keyboard
[ 4447.643] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0/event0"
[ 4447.643] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 4447.643] (**) Option "xkb_rules" "evdev"
[ 4447.643] (**) Option "xkb_model" "pc105"
[ 4447.643] (**) Option "xkb_layout" "us"
[ 4447.648] (II) config/udev: Adding input device HP Webcam [2 MP Fixed] (/dev/input/event6)
[ 4447.648] (**) HP Webcam [2 MP Fixed]: Applying InputClass "evdev keyboard catchall"
[ 4447.648] (II) Using input driver 'evdev' for 'HP Webcam [2 MP Fixed]'
[ 4447.648] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4447.648] (**) HP Webcam [2 MP Fixed]: always reports core events
[ 4447.648] (**) HP Webcam [2 MP Fixed]: Device: "/dev/input/event6"
[ 4447.648] (--) HP Webcam [2 MP Fixed]: Found keys
[ 4447.648] (II) HP Webcam [2 MP Fixed]: Configuring as keyboard
[ 4447.648] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.0/input/input6/event6"
[ 4447.648] (II) XINPUT: Adding extended input device "HP Webcam [2 MP Fixed]" (type: KEYBOARD)
[ 4447.648] (**) Option "xkb_rules" "evdev"
[ 4447.648] (**) Option "xkb_model" "pc105"
[ 4447.648] (**) Option "xkb_layout" "us"
[ 4447.657] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 4447.657] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4447.657] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 4447.657] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4447.657] (**) AT Translated Set 2 keyboard: always reports core events
[ 4447.657] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 4447.657] (--) AT Translated Set 2 keyboard: Found keys
[ 4447.657] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 4447.657] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 4447.657] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 4447.657] (**) Option "xkb_rules" "evdev"
[ 4447.657] (**) Option "xkb_model" "pc105"
[ 4447.658] (**) Option "xkb_layout" "us"
[ 4447.658] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 4447.658] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 4447.658] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 4447.658] (II) LoadModule: "synaptics"
[ 4447.659] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4447.659] (II) Module synaptics: vendor="X.Org Foundation"
[ 4447.659] compiled for 1.10.0.902, module version = 1.3.99
[ 4447.659] Module class: X.Org XInput Driver
[ 4447.659] ABI class: X.Org XInput driver, version 12.3
[ 4447.659] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 4447.659] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4447.659] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 4447.659] (**) Option "Device" "/dev/input/event8"
[ 4447.683] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5692
[ 4447.683] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4680
[ 4447.683] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 4447.683] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 4447.683] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 4447.688] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 4447.688] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 4447.695] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input8/event8"
[ 4447.695] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 4447.695] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 4447.695] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 4447.695] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 4447.695] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 4447.695] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 4447.696] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 4447.696] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 4447.701] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 4447.702] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 4447.702] (II) No input driver/identifier specified (ignoring)
[ 4447.702] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event5)
[ 4447.702] (II) No input driver/identifier specified (ignoring)
[ 4447.703] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 4447.703] (II) No input driver/identifier specified (ignoring)
[ 4447.718] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event7)
[ 4447.718] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 4447.718] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 4447.718] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 4447.718] (**) HP WMI hotkeys: always reports core events
[ 4447.718] (**) HP WMI hotkeys: Device: "/dev/input/event7"
[ 4447.732] (--) HP WMI hotkeys: Found keys
[ 4447.732] (II) HP WMI hotkeys: Configuring as keyboard
[ 4447.732] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event7"
[ 4447.732] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD)
[ 4447.732] (**) Option "xkb_rules" "evdev"
[ 4447.732] (**) Option "xkb_model" "pc105"
[ 4447.732] (**) Option "xkb_layout" "us"
[ 4448.039] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 4448.039] (II) intel(0): Printing DDC gathered Modelines:
[ 4448.039] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 4448.125] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 4448.125] (II) intel(0): Printing DDC gathered Modelines:
[ 4448.125] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 4448.205] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 4448.205] (II) intel(0): Printing DDC gathered Modelines:
[ 4448.205] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 4448.268] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 4448.268] (II) intel(0): Printing DDC gathered Modelines:
[ 4448.268] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 4448.354] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 4448.354] (II) intel(0): Printing DDC gathered Modelines:
[ 4448.354] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1382 1416 1466 768 770 776 788 -hsync -vsync (47.3 kHz)
[ 4448.424] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 4661.332] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 5238.017] (II) HP WMI hotkeys: Close
[ 5238.017] (II) UnloadModule: "evdev"
[ 5238.017] (II) Unloading evdev
[ 5238.018] (II) UnloadModule: "synaptics"
[ 5238.018] (II) Unloading synaptics
[ 5238.018] (II) AT Translated Set 2 keyboard: Close
[ 5238.018] (II) UnloadModule: "evdev"
[ 5238.018] (II) Unloading evdev
[ 5238.018] (II) HP Webcam [2 MP Fixed]: Close
[ 5238.018] (II) UnloadModule: "evdev"
[ 5238.018] (II) Unloading evdev
[ 5238.018] (II) Sleep Button: Close
[ 5238.018] (II) UnloadModule: "evdev"
[ 5238.018] (II) Unloading evdev
[ 5238.018] (II) Video Bus: Close
[ 5238.018] (II) UnloadModule: "evdev"
[ 5238.018] (II) Unloading evdev
[ 5238.018] (II) Power Button: Close
[ 5238.018] (II) UnloadModule: "evdev"
[ 5238.018] (II) Unloading evdev
[ 5238.047] ddxSigGiveUp: Closing log
And here's dmesg:
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-8-generic (buildd@vernadsky) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu3) ) #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 (Ubuntu 2.6.38-8.42-generic 2.6.38.2)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000076b58000 (usable)
[ 0.000000] BIOS-e820: 0000000076b58000 - 0000000076b5a000 (reserved)
[ 0.000000] BIOS-e820: 0000000076b5a000 - 0000000077970000 (usable)
[ 0.000000] BIOS-e820: 0000000077970000 - 0000000077980000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000077980000 - 000000007a10a000 (usable)
[ 0.000000] BIOS-e820: 000000007a10a000 - 000000007a30a000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007a30a000 - 000000007ba92000 (usable)
[ 0.000000] BIOS-e820: 000000007ba92000 - 000000007ba9a000 (reserved)
[ 0.000000] BIOS-e820: 000000007ba9a000 - 000000007babf000 (usable)
[ 0.000000] BIOS-e820: 000000007babf000 - 000000007bacf000 (reserved)
[ 0.000000] BIOS-e820: 000000007bacf000 - 000000007bbcf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007bbcf000 - 000000007bbff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007bbff000 - 000000007bc00000 (usable)
[ 0.000000] BIOS-e820: 000000007bc00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Hewlett-Packard HP ProBook 4510s/3072, BIOS 68PZI Ver. F.0F 10/20/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7bc00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 077970000 mask FFFFF0000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 35cb0000 - 36e50000
[ 0.000000] ACPI: RSDP 000f6970 00024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 7bbfe120 00074 (v01 HPQOEM SLIC-MPC 0000000F 01000013)
[ 0.000000] ACPI: FACP 7bbfc000 000F4 (v03 HPQOEM 3072 0000000F HP 00000001)
[ 0.000000] ACPI: DSDT 7bbdb000 1B05A (v01 HPQOEM 3072 00000001 INTL 20060912)
[ 0.000000] ACPI: FACS 7bbad000 00040
[ 0.000000] ACPI: HPET 7bbfb000 00038 (v01 HPQOEM 3072 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 7bbfa000 00084 (v01 HPQOEM 3072 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 7bbf9000 0003C (v01 HPQOEM 3072 00000001 HP 00000001)
[ 0.000000] ACPI: ASF! 7bbf8000 000A0 (v32 HPQOEM 3072 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 7bbda000 0064F (v01 HPQOEM SataPri 00001000 INTL 20060912)
[ 0.000000] ACPI: SSDT 7bbd9000 00692 (v01 HPQOEM SataSec 00001000 INTL 20060912)
[ 0.000000] ACPI: SSDT 7bbd6000 0066C (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 7bbd5000 00288 (v01 PmRef Cpu0Tst 00003000 INTL 20060912)
[ 0.000000] ACPI: SSDT 7bbd4000 00225 (v01 PmRef ApTst 00003000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1092MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007bc00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[7] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00076b58
[ 0.000000] 0: 0x00076b5a -> 0x00077970
[ 0.000000] 0: 0x00077980 -> 0x0007a10a
[ 0.000000] 0: 0x0007a30a -> 0x0007ba92
[ 0.000000] 0: 0x0007ba9a -> 0x0007babf
[ 0.000000] 0: 0x0007bbff -> 0x0007bc00
[ 0.000000] On node 0 totalpages: 505909
[ 0.000000] free_area_init_node: node 0, pgdat c1784100, node_mem_map f4d38200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2185 pages used for memmap
[ 0.000000] HighMem zone: 276511 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ef000
[ 0.000000] PM: Registered nosave memory: 00000000000ef000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f7000000 s28800 r0 d24448 u1048576
[ 0.000000] pcpu-alloc: s28800 r0 d24448 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 501948
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=846c2273-e3f1-4e5d-b501-6ea7513a99b1 ro vga=792
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 10137280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007bc00)
[ 0.000000] Memory: 1969428k/2027520k available (5188k kernel code, 54208k reserved, 2540k data, 700k init, 1114784k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB)
[ 0.000000] .data : 0xc15112a1 - 0xc178c480 (2540 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15112a1 (5188 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f3c08000 soft=f3c0a000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2095.182 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4190.36 BogoMIPS (lpj=8380728)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.004039] Security Framework initialized
[ 0.004056] AppArmor: AppArmor initialized
[ 0.004060] Yama: becoming mindful.
[ 0.004119] Mount-cache hash table entries: 512
[ 0.004258] Initializing cgroup subsys ns
[ 0.004264] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.004271] Initializing cgroup subsys cpuacct
[ 0.004278] Initializing cgroup subsys memory
[ 0.004289] Initializing cgroup subsys devices
[ 0.004294] Initializing cgroup subsys freezer
[ 0.004298] Initializing cgroup subsys net_cls
[ 0.004302] Initializing cgroup subsys blkio
[ 0.004342] CPU: Physical Processor ID: 0
[ 0.004347] CPU: Processor Core ID: 0
[ 0.004351] mce: CPU supports 6 MCE banks
[ 0.004361] CPU0: Thermal monitoring handled by SMI
[ 0.004365] using mwait in idle threads.
[ 0.010507] ACPI: Core revision 20110112
[ 0.021747] ftrace: allocating 23640 entries in 47 pages
[ 0.024055] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024420] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064834] CPU0: Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz stepping 0a
[ 0.068003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.068003] ... version: 2
[ 0.068003] ... bit width: 40
[ 0.068003] ... generic registers: 2
[ 0.068003] ... value mask: 000000ffffffffff
[ 0.068003] ... max period: 000000007fffffff
[ 0.068003] ... fixed-purpose events: 3
[ 0.068003] ... event mask: 0000000700000003
[ 0.068003] CPU 1 irqstacks, hard=f3cd2000 soft=f3cd4000
[ 0.068003] Booting Node 0, Processors #1
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.156026] Brought up 2 CPUs
[ 0.156036] Total of 2 processors activated (8379.82 BogoMIPS).
[ 0.156600] devtmpfs: initialized
[ 0.157303] print_constraints: dummy:
[ 0.157340] Time: 16:56:02 Date: 02/01/12
[ 0.157381] NET: Registered protocol family 16
[ 0.157411] Trying to unpack rootfs image as initramfs...
[ 0.157505] EISA bus registered
[ 0.157514] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.157521] ACPI: bus type pci registered
[ 0.157599] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.157607] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.157613] PCI: Using MMCONFIG for extended config space
[ 0.157617] PCI: Using configuration type 1 for base access
[ 0.172147] bio: create slab <bio-0> at 0
[ 0.175001] ACPI: EC: Look up EC in DSDT
[ 0.212110] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.290035] ACPI: SSDT 7bac6c18 00275 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.290702] ACPI: Dynamic OEM Table Load:
[ 0.290708] ACPI: SSDT (null) 00275 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.290873] ACPI: SSDT 7bac4618 0057B (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.291513] ACPI: Dynamic OEM Table Load:
[ 0.291519] ACPI: SSDT (null) 0057B (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.352379] ACPI: SSDT 7bac5e18 001D7 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.353071] ACPI: Dynamic OEM Table Load:
[ 0.353077] ACPI: SSDT (null) 001D7 (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.364161] ACPI: SSDT 7bac6f18 0008D (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.364823] ACPI: Dynamic OEM Table Load:
[ 0.364829] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.583229] Freeing initrd memory: 18048k freed
[ 0.640150] ACPI: Interpreter enabled
[ 0.640169] ACPI: (supports S0 S3 S4 S5)
[ 0.640200] ACPI: Using IOAPIC for interrupt routing
[ 0.645091] ACPI: Power Resource [APPR] (off)
[ 0.674026] ACPI: Power Resource [PFN6] (off)
[ 0.674107] ACPI: Power Resource [PFN7] (off)
[ 0.674185] ACPI: Power Resource [PFN8] (off)
[ 0.674262] ACPI: Power Resource [PFN9] (off)
[ 0.674343] ACPI: Power Resource [PFNA] (off)
[ 0.674423] ACPI: Power Resource [PFNB] (off)
[ 0.674476] ACPI: Power Resource [PGF0] (off)
[ 0.675277] ACPI: Power Resource [PFN0] (off)
[ 0.675359] ACPI: Power Resource [PFN1] (off)
[ 0.675437] ACPI: Power Resource [PFN2] (off)
[ 0.675516] ACPI: Power Resource [PFN3] (off)
[ 0.675598] ACPI: Power Resource [PFN4] (off)
[ 0.675677] ACPI: Power Resource [PFN5] (off)
[ 0.676756] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.677072] ACPI: No dock devices found.
[ 0.677077] HEST: Table not found.
[ 0.677083] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.678132] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.678930] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.678937] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.678942] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.678950] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xdfffffff]
[ 0.678956] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfedfffff]
[ 0.678962] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff]
[ 0.678982] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
[ 0.679009] DMAR: Forcing write-buffer flush capability
[ 0.679013] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.679040] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
[ 0.679055] pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
[ 0.679065] pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.679072] pci 0000:00:02.0: reg 20: [io 0x7120-0x7127]
[ 0.679108] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
[ 0.679121] pci 0000:00:02.1: reg 10: [mem 0x90400000-0x904fffff 64bit]
[ 0.679217] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[ 0.679280] pci 0000:00:1a.0: reg 20: [io 0x70a0-0x70bf]
[ 0.679344] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[ 0.679407] pci 0000:00:1a.1: reg 20: [io 0x7080-0x709f]
[ 0.679470] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
[ 0.679533] pci 0000:00:1a.2: reg 20: [io 0x7060-0x707f]
[ 0.679610] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[ 0.679640] pci 0000:00:1a.7: reg 10: [mem 0x98804400-0x988047ff]
[ 0.679739] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.679745] pci 0000:00:1a.7: PME# disabled
[ 0.679778] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
[ 0.679802] pci 0000:00:1b.0: reg 10: [mem 0x98800000-0x98803fff 64bit]
[ 0.679888] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.679893] pci 0000:00:1b.0: PME# disabled
[ 0.679922] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[ 0.680011] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.680016] pci 0000:00:1c.0: PME# disabled
[ 0.680062] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
[ 0.680152] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.680157] pci 0000:00:1c.2: PME# disabled
[ 0.680191] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
[ 0.680279] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.680285] pci 0000:00:1c.4: PME# disabled
[ 0.680317] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
[ 0.680406] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.680411] pci 0000:00:1c.5: PME# disabled
[ 0.680447] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[ 0.680509] pci 0000:00:1d.0: reg 20: [io 0x7040-0x705f]
[ 0.680573] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[ 0.680636] pci 0000:00:1d.1: reg 20: [io 0x7020-0x703f]
[ 0.680700] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[ 0.680763] pci 0000:00:1d.2: reg 20: [io 0x7000-0x701f]
[ 0.680840] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[ 0.680869] pci 0000:00:1d.7: reg 10: [mem 0x98804000-0x988043ff]
[ 0.680967] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.680973] pci 0000:00:1d.7: PME# disabled
[ 0.681000] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.681090] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
[ 0.681249] pci 0000:00:1f.2: [8086:2928] type 0 class 0x000101
[ 0.681274] pci 0000:00:1f.2: reg 10: [io 0x7118-0x711f]
[ 0.681286] pci 0000:00:1f.2: reg 14: [io 0x7134-0x7137]
[ 0.681299] pci 0000:00:1f.2: reg 18: [io 0x7110-0x7117]
[ 0.681312] pci 0000:00:1f.2: reg 1c: [io 0x7130-0x7133]
[ 0.681324] pci 0000:00:1f.2: reg 20: [io 0x70f0-0x70ff]
[ 0.681337] pci 0000:00:1f.2: reg 24: [io 0x70e0-0x70ef]
[ 0.681408] pci 0000:00:1f.5: [8086:292d] type 0 class 0x000101
[ 0.681433] pci 0000:00:1f.5: reg 10: [io 0x7108-0x710f]
[ 0.681445] pci 0000:00:1f.5: reg 14: [io 0x712c-0x712f]
[ 0.681458] pci 0000:00:1f.5: reg 18: [io 0x7100-0x7107]
[ 0.681470] pci 0000:00:1f.5: reg 1c: [io 0x7128-0x712b]
[ 0.681483] pci 0000:00:1f.5: reg 20: [io 0x70d0-0x70df]
[ 0.681495] pci 0000:00:1f.5: reg 24: [io 0x70c0-0x70cf]
[ 0.681611] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.681619] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.681625] pci 0000:00:1c.0: bridge window [mem 0x98700000-0x987fffff]
[ 0.681634] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.681698] pci 0000:00:1c.2: PCI bridge to [bus 02-42]
[ 0.681706] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff]
[ 0.681711] pci 0000:00:1c.2: bridge window [mem 0x94700000-0x986fffff]
[ 0.681720] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.681784] pci 0000:00:1c.4: PCI bridge to [bus 43-83]
[ 0.681792] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
[ 0.681797] pci 0000:00:1c.4: bridge window [mem 0x90700000-0x946fffff]
[ 0.681805] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.682066] pci 0000:84:00.0: [11ab:436c] type 0 class 0x000200
[ 0.682239] pci 0000:84:00.0: reg 10: [mem 0x90600000-0x90603fff 64bit]
[ 0.682339] pci 0000:84:00.0: reg 18: [io 0x2000-0x20ff]
[ 0.682700] pci 0000:84:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
[ 0.683025] pci 0000:84:00.0: supports D1 D2
[ 0.683027] pci 0000:84:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.683053] pci 0000:84:00.0: PME# disabled
[ 0.683233] pci 0000:00:1c.5: PCI bridge to [bus 84-84]
[ 0.683241] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.683246] pci 0000:00:1c.5: bridge window [mem 0x90600000-0x906fffff]
[ 0.683255] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.683356] pci 0000:00:1e.0: PCI bridge to [bus 85-85] (subtractive decode)
[ 0.683364] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.683369] pci 0000:00:1e.0: bridge window [mem 0x90500000-0x905fffff]
[ 0.683378] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.683381] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.683384] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.683387] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.683389] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
[ 0.683392] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfedfffff] (subtractive decode)
[ 0.683395] pci 0000:00:1e.0: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode)
[ 0.683429] pci_bus 0000:00: on NUMA node 0
[ 0.683432] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.683666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.683726] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.683820] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
[ 0.683913] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.684008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.694753] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.694817] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.694878] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.694939] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.695000] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.695061] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.695122] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.695183] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.695317] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.695336] vgaarb: loaded
[ 0.695611] SCSI subsystem initialized
[ 0.695626] libata version 3.00 loaded.
[ 0.695626] usbcore: registered new interface driver usbfs
[ 0.695626] usbcore: registered new interface driver hub
[ 0.695626] usbcore: registered new device driver usb
[ 0.696179] wmi: Mapper loaded
[ 0.696184] PCI: Using ACPI for IRQ routing
[ 0.696190] PCI: pci_cache_line_size set to 64 bytes
[ 0.696291] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.696294] reserve RAM buffer: 0000000076b58000 - 0000000077ffffff
[ 0.696297] reserve RAM buffer: 0000000077970000 - 0000000077ffffff
[ 0.696299] reserve RAM buffer: 000000007a10a000 - 000000007bffffff
[ 0.696303] reserve RAM buffer: 000000007ba92000 - 000000007bffffff
[ 0.696307] reserve RAM buffer: 000000007babf000 - 000000007bffffff
[ 0.696310] reserve RAM buffer: 000000007bc00000 - 000000007bffffff
[ 0.696423] NetLabel: Initializing
[ 0.696428] NetLabel: domain hash size = 128
[ 0.696431] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.696445] NetLabel: unlabeled traffic allowed by default
[ 0.696492] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.696503] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.696511] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.700061] Switching to clocksource hpet
[ 0.703893] Switched to NOHz mode on CPU #0
[ 0.703995] Switched to NOHz mode on CPU #1
[ 0.708287] AppArmor: AppArmor Filesystem Enabled
[ 0.708327] pnp: PnP ACPI init
[ 0.708349] ACPI: bus type pnp registered
[ 0.708794] pnp 00:00: [bus 00-ff]
[ 0.708798] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.708800] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.708802] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.708805] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.708808] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.708810] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.708812] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.708815] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.708817] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.708820] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.708822] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.708825] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.708827] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.708832] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.708834] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.708837] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.708839] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.708842] pnp 00:00: [mem 0x80000000-0xdfffffff window]
[ 0.708844] pnp 00:00: [mem 0xf0000000-0xfedfffff window]
[ 0.708847] pnp 00:00: [mem 0xfee01000-0xffffffff window]
[ 0.708984] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.709077] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.709080] pnp 00:01: [mem 0xfed10000-0xfed13fff]
[ 0.709082] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.709084] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.709087] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.709089] pnp 00:01: [mem 0xfec00000-0xfec00fff]
[ 0.709091] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.709094] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
[ 0.709160] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.709167] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.709172] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.709178] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.709184] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.709189] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.709195] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.709201] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.709207] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.709677] pnp 00:02: [io 0x0000-0x001f]
[ 0.709679] pnp 00:02: [io 0x0081-0x0091]
[ 0.709682] pnp 00:02: [io 0x0093-0x009f]
[ 0.709684] pnp 00:02: [io 0x00c0-0x00df]
[ 0.709686] pnp 00:02: [dma 4]
[ 0.709752] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.709762] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.709827] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.709862] pnp 00:04: [io 0xfe00-0xfe0f]
[ 0.709865] pnp 00:04: [io 0xfe80-0xfe8f]
[ 0.709867] pnp 00:04: [mem 0xfed40000-0xfed44fff]
[ 0.709953] system 00:04: [io 0xfe00-0xfe0f] has been reserved
[ 0.709959] system 00:04: [io 0xfe80-0xfe8f] has been reserved
[ 0.709965] system 00:04: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.709971] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.710068] pnp 00:05: [mem 0xfed00000-0xfed003ff]
[ 0.710157] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.710164] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.710177] pnp 00:06: [io 0x00f0]
[ 0.710191] pnp 00:06: [irq 13]
[ 0.710259] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.710272] pnp 00:07: [io 0x002e-0x002f]
[ 0.710275] pnp 00:07: [io 0x004e-0x004f]
[ 0.710277] pnp 00:07: [io 0x0061]
[ 0.710279] pnp 00:07: [io 0x0063]
[ 0.710281] pnp 00:07: [io 0x0065]
[ 0.710283] pnp 00:07: [io 0x0067]
[ 0.710285] pnp 00:07: [io 0x0070]
[ 0.710287] pnp 00:07: [io 0x0080]
[ 0.710289] pnp 00:07: [io 0x0092]
[ 0.710291] pnp 00:07: [io 0x00b2-0x00b3]
[ 0.710293] pnp 00:07: [io 0x0200-0x027f]
[ 0.710295] pnp 00:07: [io 0x1000-0x1003]
[ 0.710297] pnp 00:07: [io 0x1010-0x101f]
[ 0.710300] pnp 00:07: [io 0xffff]
[ 0.710302] pnp 00:07: [io 0x0400-0x047f]
[ 0.710304] pnp 00:07: [io 0x0500-0x057f]
[ 0.710306] pnp 00:07: [io 0xef80-0xef9f]
[ 0.710409] system 00:07: [io 0x0200-0x027f] has been reserved
[ 0.710415] system 00:07: [io 0x1000-0x1003] has been reserved
[ 0.710420] system 00:07: [io 0x1010-0x101f] has been reserved
[ 0.710426] system 00:07: [io 0xffff] has been reserved
[ 0.710431] system 00:07: [io 0x0400-0x047f] has been reserved
[ 0.710436] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.710441] system 00:07: [io 0xef80-0xef9f] has been reserved
[ 0.710447] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.710458] pnp 00:08: [io 0x0070-0x0077]
[ 0.710463] pnp 00:08: [irq 8]
[ 0.710530] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.710689] pnp 00:09: [io 0x0060]
[ 0.710692] pnp 00:09: [io 0x0064]
[ 0.710697] pnp 00:09: [irq 1]
[ 0.710766] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.710780] pnp 00:0a: [irq 12]
[ 0.710852] pnp 00:0a: Plug and Play ACPI device, IDs SYN0149 SYN0100 SYN0002 PNP0f13 (active)
[ 0.710900] pnp 00:0b: [irq 23]
[ 0.710972] pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
[ 0.711116] pnp: PnP ACPI: found 12 devices
[ 0.711121] ACPI: ACPI bus type pnp unregistered
[ 0.711128] PnPBIOS: Disabled by ACPI PNP
[ 0.747836] pci 0000:84:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 0.747901] pci 0000:00:1c.0: BAR 15: assigned [mem 0x98900000-0x98afffff 64bit pref]
[ 0.747911] pci 0000:00:1c.2: BAR 15: assigned [mem 0x98b00000-0x98cfffff 64bit pref]
[ 0.747920] pci 0000:00:1c.4: BAR 15: assigned [mem 0x98d00000-0x98efffff 64bit pref]
[ 0.747928] pci 0000:00:1c.5: BAR 15: assigned [mem 0x98f00000-0x990fffff pref]
[ 0.747936] pci 0000:00:1c.0: BAR 13: assigned [io 0x8000-0x8fff]
[ 0.747941] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.747947] pci 0000:00:1c.0: bridge window [io 0x8000-0x8fff]
[ 0.747957] pci 0000:00:1c.0: bridge window [mem 0x98700000-0x987fffff]
[ 0.747965] pci 0000:00:1c.0: bridge window [mem 0x98900000-0x98afffff 64bit pref]
[ 0.747977] pci 0000:00:1c.2: PCI bridge to [bus 02-42]
[ 0.747983] pci 0000:00:1c.2: bridge window [io 0x5000-0x6fff]
[ 0.747992] pci 0000:00:1c.2: bridge window [mem 0x94700000-0x986fffff]
[ 0.748015] pci 0000:00:1c.2: bridge window [mem 0x98b00000-0x98cfffff 64bit pref]
[ 0.748027] pci 0000:00:1c.4: PCI bridge to [bus 43-83]
[ 0.748033] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
[ 0.748042] pci 0000:00:1c.4: bridge window [mem 0x90700000-0x946fffff]
[ 0.748050] pci 0000:00:1c.4: bridge window [mem 0x98d00000-0x98efffff 64bit pref]
[ 0.748063] pci 0000:84:00.0: BAR 6: assigned [mem 0x98f00000-0x98f1ffff pref]
[ 0.748069] pci 0000:00:1c.5: PCI bridge to [bus 84-84]
[ 0.748075] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.748084] pci 0000:00:1c.5: bridge window [mem 0x90600000-0x906fffff]
[ 0.748092] pci 0000:00:1c.5: bridge window [mem 0x98f00000-0x990fffff pref]
[ 0.748104] pci 0000:00:1e.0: PCI bridge to [bus 85-85]
[ 0.748108] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.748117] pci 0000:00:1e.0: bridge window [mem 0x90500000-0x905fffff]
[ 0.748124] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.748147] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.748157] pci 0000:00:1c.0: setting latency timer to 64
[ 0.748168] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.748176] pci 0000:00:1c.2: setting latency timer to 64
[ 0.748184] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.748192] pci 0000:00:1c.4: setting latency timer to 64
[ 0.748203] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.748211] pci 0000:00:1c.5: setting latency timer to 64
[ 0.748220] pci 0000:00:1e.0: setting latency timer to 64
[ 0.748225] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.748227] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.748230] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.748232] pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff]
[ 0.748235] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
[ 0.748237] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
[ 0.748240] pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]
[ 0.748242] pci_bus 0000:01: resource 1 [mem 0x98700000-0x987fffff]
[ 0.748245] pci_bus 0000:01: resource 2 [mem 0x98900000-0x98afffff 64bit pref]
[ 0.748248] pci_bus 0000:02: resource 0 [io 0x5000-0x6fff]
[ 0.748250] pci_bus 0000:02: resource 1 [mem 0x94700000-0x986fffff]
[ 0.748253] pci_bus 0000:02: resource 2 [mem 0x98b00000-0x98cfffff 64bit pref]
[ 0.748256] pci_bus 0000:43: resource 0 [io 0x3000-0x4fff]
[ 0.748258] pci_bus 0000:43: resource 1 [mem 0x90700000-0x946fffff]
[ 0.748261] pci_bus 0000:43: resource 2 [mem 0x98d00000-0x98efffff 64bit pref]
[ 0.748263] pci_bus 0000:84: resource 0 [io 0x2000-0x2fff]
[ 0.748266] pci_bus 0000:84: resource 1 [mem 0x90600000-0x906fffff]
[ 0.748269] pci_bus 0000:84: resource 2 [mem 0x98f00000-0x990fffff pref]
[ 0.748271] pci_bus 0000:85: resource 1 [mem 0x90500000-0x905fffff]
[ 0.748274] pci_bus 0000:85: resource 4 [io 0x0000-0x0cf7]
[ 0.748276] pci_bus 0000:85: resource 5 [io 0x0d00-0xffff]
[ 0.748279] pci_bus 0000:85: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.748281] pci_bus 0000:85: resource 7 [mem 0x80000000-0xdfffffff]
[ 0.748284] pci_bus 0000:85: resource 8 [mem 0xf0000000-0xfedfffff]
[ 0.748286] pci_bus 0000:85: resource 9 [mem 0xfee01000-0xffffffff]
[ 0.748322] NET: Registered protocol family 2
[ 0.748400] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.748683] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.749160] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.749357] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.749362] TCP reno registered
[ 0.749366] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.749376] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.749469] NET: Registered protocol family 1
[ 0.749490] pci 0000:00:02.0: Boot video device
[ 0.749768] PCI: CLS 64 bytes, default 64
[ 0.750018] cpufreq-nforce2: No nForce2 chipset.
[ 0.750178] audit: initializing netlink socket (disabled)
[ 0.750190] type=2000 audit(1328115361.744:1): initialized
[ 0.760093] highmem bounce pool size: 64 pages
[ 0.760101] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.762113] VFS: Disk quotas dquot_6.5.2
[ 0.762183] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.762915] fuse init (API version 7.16)
[ 0.763028] msgmni has been set to 1704
[ 0.763306] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.763340] io scheduler noop registered
[ 0.763345] io scheduler deadline registered
[ 0.763363] io scheduler cfq registered (default)
[ 0.763495] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.763558] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.763646] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.763702] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
[ 0.763788] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.763845] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.763932] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.763988] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.764119] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.764155] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.764231] intel_idle: MWAIT substates: 0x3122220
[ 0.764233] intel_idle: does not run on family 6 model 23
[ 0.764413] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.764544] ACPI: AC Adapter [AC] (on-line)
[ 0.764829] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 0.764839] ACPI: Sleep Button [SLPB]
[ 0.764894] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.764946] ACPI: Lid Switch [LID]
[ 0.765008] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.765015] ACPI: Power Button [PWRF]
[ 0.765134] ACPI: Fan [FAN6] (off)
[ 0.765203] ACPI: Fan [FAN7] (off)
[ 0.765269] ACPI: Fan [FAN8] (off)
[ 0.765339] ACPI: Fan [FAN9] (off)
[ 0.765405] ACPI: Fan [FANA] (off)
[ 0.765471] ACPI: Fan [FANB] (off)
[ 0.765517] ACPI: Fan [FANG] (off)
[ 0.765586] ACPI: Fan [FAN0] (off)
[ 0.765653] ACPI: Fan [FAN1] (off)
[ 0.765721] ACPI: Fan [FAN2] (off)
[ 0.765790] ACPI: Fan [FAN3] (off)
[ 0.765864] ACPI: Fan [FAN4] (off)
[ 0.765933] ACPI: Fan [FAN5] (off)
[ 0.766182] ACPI: acpi_idle registered with cpuidle
[ 0.768787] Monitor-Mwait will be used to enter C-1 state
[ 0.768817] Monitor-Mwait will be used to enter C-2 state
[ 0.768824] Marking TSC unstable due to TSC halts in idle
[ 1.308782] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.308789] ACPI: Thermal Zone [GFXZ] (16 C)
[ 1.318208] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.318214] ACPI: Thermal Zone [DTSZ] (33 C)
[ 1.323524] thermal LNXTHERM:02: registered as thermal_zone2
[ 1.323530] ACPI: Thermal Zone [CPUZ] (34 C)
[ 1.327027] thermal LNXTHERM:03: registered as thermal_zone3
[ 1.327033] ACPI: Thermal Zone [SKNZ] (21 C)
[ 1.337724] thermal LNXTHERM:04: registered as thermal_zone4
[ 1.337730] ACPI: Thermal Zone [BATZ] (20 C)
[ 1.341475] thermal LNXTHERM:05: registered as thermal_zone5
[ 1.341481] ACPI: Thermal Zone [FDTZ] (34 C)
[ 1.341517] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.341604] ERST: Table is not found!
[ 1.341672] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.341814] isapnp: Scanning for PnP cards...
[ 1.393864] ACPI: Battery Slot [BAT0] (battery present)
[ 1.697184] isapnp: No Plug & Play device found
[ 1.736609] Linux agpgart interface v0.103
[ 1.736735] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 1.736873] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.737900] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.738034] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 1.739500] brd: module loaded
[ 1.740227] loop: module loaded
[ 1.740336] i2c-core: driver [adp5520] using legacy suspend method
[ 1.740341] i2c-core: driver [adp5520] using legacy resume method
[ 1.740463] ata_piix 0000:00:1f.2: version 2.13
[ 1.740488] ata_piix 0000:00:1f.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.740498] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 1.896036] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.896338] scsi0 : ata_piix
[ 1.896444] scsi1 : ata_piix
[ 1.897108] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x70f0 irq 14
[ 1.897116] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x70f8 irq 15
[ 1.897139] ata_piix 0000:00:1f.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.897150] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.052024] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 2.052040] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.052320] scsi2 : ata_piix
[ 2.052408] scsi3 : ata_piix
[ 2.052462] ata3: SATA max UDMA/133 cmd 0x7108 ctl 0x712c bmdma 0x70d0 irq 18
[ 2.052467] ata4: SATA max UDMA/133 cmd 0x7100 ctl 0x7128 bmdma 0x70d8 irq 18
[ 2.052948] Fixed MDIO Bus: probed
[ 2.053001] PPP generic driver version 2.4.2
[ 2.053053] tun: Universal TUN/TAP device driver, 1.6
[ 2.053057] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.053159] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.053184] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.053203] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.053207] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.053253] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.053382] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.057274] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 2.057290] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x98804400
[ 2.072017] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.072144] hub 1-0:1.0: USB hub found
[ 2.072151] hub 1-0:1.0: 6 ports detected
[ 2.072245] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 20 (level, low) -> IRQ 20
[ 2.072261] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.072265] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.072311] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.072368] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.076256] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 2.076271] ehci_hcd 0000:00:1d.7: irq 20, io mem 0x98804000
[ 2.092017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.092152] hub 2-0:1.0: USB hub found
[ 2.092159] hub 2-0:1.0: 6 ports detected
[ 2.092249] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.092268] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.092297] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.092307] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.092310] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.092355] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 2.092414] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000070a0
[ 2.092545] hub 3-0:1.0: USB hub found
[ 2.092552] hub 3-0:1.0: 2 ports detected
[ 2.092631] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 2.092641] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.092645] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.092691] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.092750] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00007080
[ 2.092886] hub 4-0:1.0: USB hub found
[ 2.092892] hub 4-0:1.0: 2 ports detected
[ 2.092975] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.092987] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 2.092991] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.093037] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.096051] uhci_hcd 0000:00:1a.2: irq 18, io base 0x00007060
[ 2.096181] hub 5-0:1.0: USB hub found
[ 2.096187] hub 5-0:1.0: 2 ports detected
[ 2.096268] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.096278] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.096281] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.096322] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.096370] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007040
[ 2.096506] hub 6-0:1.0: USB hub found
[ 2.096512] hub 6-0:1.0: 2 ports detected
[ 2.096592] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 2.096604] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.096608] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.096652] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.096711] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00007020
[ 2.096843] hub 7-0:1.0: USB hub found
[ 2.096850] hub 7-0:1.0: 2 ports detected
[ 2.096927] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.096937] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.096941] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.096981] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.097032] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00007000
[ 2.097173] hub 8-0:1.0: USB hub found
[ 2.097180] hub 8-0:1.0: 2 ports detected
[ 2.097333] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.098988] i8042: Detected active multiplexing controller, rev 1.1
[ 2.099751] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.099759] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.099796] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.099832] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.099864] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.100016] mousedev: PS/2 mouse device common for all mice
[ 2.100207] rtc_cmos 00:08: RTC can wake from S4
[ 2.100273] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 2.100309] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.100403] device-mapper: uevent: version 1.0.3
[ 2.100488] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 2.100563] device-mapper: multipath: version 1.2.0 loaded
[ 2.100569] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.100653] EISA: Probing bus 0 at eisa.0
[ 2.100658] EISA: Cannot allocate resource for mainboard
[ 2.100663] Cannot allocate resource for EISA slot 1
[ 2.100667] Cannot allocate resource for EISA slot 2
[ 2.100672] Cannot allocate resource for EISA slot 3
[ 2.100676] Cannot allocate resource for EISA slot 4
[ 2.100681] Cannot allocate resource for EISA slot 5
[ 2.100685] Cannot allocate resource for EISA slot 6
[ 2.100690] Cannot allocate resource for EISA slot 7
[ 2.100694] Cannot allocate resource for EISA slot 8
[ 2.100698] EISA: Detected 0 cards.
[ 2.100821] cpuidle: using governor ladder
[ 2.100905] cpuidle: using governor menu
[ 2.101203] TCP cubic registered
[ 2.101346] NET: Registered protocol family 10
[ 2.101969] NET: Registered protocol family 17
[ 2.101988] Registering the dns_resolver key type
[ 2.103175] Using IPI No-Shortcut mode
[ 2.103277] PM: Hibernation image not present or could not be loaded.
[ 2.103289] registered taskstats version 1
[ 2.103629] Magic number: 0:636:943
[ 2.103664] tty tty0: hash matches
[ 2.103668] tty console: hash matches
[ 2.103766] rtc_cmos 00:08: setting system clock to 2012-02-01 16:56:04 UTC (1328115364)
[ 2.103782] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.103787] EDD information not available.
[ 2.121982] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.372224] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.380342] ata1.00: ATA-8: WDC WD3200BEKT-60F3T1, 12.01A12, max UDMA/100
[ 2.380354] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.388352] ata1.00: configured for UDMA/100
[ 2.388532] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-6 12.0 PQ: 0 ANSI: 5
[ 2.388712] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.388715] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.388772] sd 0:0:0:0: [sda] Write Protect is off
[ 2.388778] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.388834] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.499040] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 >
[ 2.499798] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.572176] usb 2-6: new high speed USB device using ehci_hcd and address 4
[ 2.924173] ata2: failed to resume link (SControl 0)
[ 2.935272] ata2: SATA link down (SStatus 4 SControl 0)
[ 2.935376] Freeing unused kernel memory: 700k freed
[ 2.935645] Write protecting the kernel text: 5192k
[ 2.935709] Write protecting the kernel read-only data: 2148k
[ 2.960033] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 2.962508] <30>udev[78]: starting version 167
[ 3.102672] [drm] Initialized drm 1.1.0 20060810
[ 3.109905] sky2: driver version 1.28
[ 3.109952] sky2 0000:84:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.109970] sky2 0000:84:00.0: setting latency timer to 64
[ 3.110003] sky2 0000:84:00.0: Yukon-2 Extreme chip revision 2
[ 3.110140] sky2 0000:84:00.0: irq 44 for MSI/MSI-X
[ 3.115378] sky2 0000:84:00.0: eth0: addr 18:a9:05:d2:cc:1c
[ 3.141002] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.141015] i915 0000:00:02.0: setting latency timer to 64
[ 3.176343] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 3.176350] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.176357] [drm] Driver supports precise vblank timestamp query.
[ 3.195927] input: USB LaserStream(TM) Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input4
[ 3.196089] generic-usb 0003:192F:0716.0001: input,hidraw0: USB HID v1.11 Mouse [USB LaserStream(TM) Mouse] on usb-0000:00:1d.0-1/input0
[ 3.196116] usbcore: registered new interface driver usbhid
[ 3.196120] usbhid: USB HID core driver
[ 3.263543] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.376020] usb 6-2: new full speed USB device using uhci_hcd and address 3
[ 3.556461] hub 6-2:1.0: USB hub found
[ 3.558416] hub 6-2:1.0: 4 ports detected
[ 3.732098] Console: switching to colour frame buffer device 170x48
[ 3.736048] fb0: inteldrmfb frame buffer device
[ 3.736100] drm: registered panic notifier
[ 3.752751] acpi device:09: registered as cooling_device15
[ 3.753204] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5
[ 3.753358] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.753749] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.783292] vesafb: framebuffer at 0x80000000, mapped to 0xf9000000, using 3072k, total 3072k
[ 3.783354] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 3.783393] vesafb: scrolling: redraw
[ 3.783420] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.783531] fb1: VESA VGA frame buffer device
[ 4.155931] Btrfs loaded
[ 4.162905] xor: automatically using best checksumming function: pIII_sse
[ 4.180010] pIII_sse : 8328.000 MB/sec
[ 4.180044] xor: using function: pIII_sse (8328.000 MB/sec)
[ 4.182726] device-mapper: dm-raid45: initialized v0.2594b
[ 4.466718] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 18.657798] <30>udev[385]: starting version 167
[ 18.678911] lp: driver loaded but no devices found
[ 18.849899] hp_accel: laptop model unknown, using default axes configuration
[ 18.850539] lis3lv02d: 8 bits sensor found
[ 18.924154] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6
[ 18.924329] Registered led device: hp::hddprotect
[ 18.924356] hp_accel: driver loaded
[ 18.946311] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro
[ 19.260653] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 19.492208] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 19.554530] cfg80211: Calling CRDA to update world regulatory domain
[ 19.590795] cfg80211: World regulatory domain updated:
[ 19.590800] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.590803] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.590805] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.590809] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.590811] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.590814] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.612382] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 19.612386] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 19.612388] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 19.612391] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 19.612393] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 19.612396] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 19.612398] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 19.612401] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 19.612403] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 19.612406] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 19.612408] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 19.612411] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 19.612413] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 19.612416] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 19.612418] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 19.612421] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 19.612423] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 19.612426] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 19.612429] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 19.612431] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 19.612434] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 19.612436] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 19.612439] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 19.612441] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 19.612444] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 19.612446] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 19.612449] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 19.612451] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 19.618380] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 19.619138] Registered led device: rt2800usb-phy0::radio
[ 19.619170] Registered led device: rt2800usb-phy0::assoc
[ 19.619196] Registered led device: rt2800usb-phy0::quality
[ 19.619487] usbcore: registered new interface driver rt2800usb
[ 19.620448] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 19.626317] rtusb init --->
[ 19.626403] usbcore: registered new interface driver rt2870
[ 19.672584] <30>udev[394]: renamed network interface wlan0 to wlan1
[ 19.704735] sky2 0000:84:00.0: eth0: enabling interface
[ 19.705003] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.836116] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 19.876500] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 20.091415] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 20.091426] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 20.091437] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 20.091528] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 20.091561] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 20.102842] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 21.106747] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy0
[ 21.342148] ppdev: user-space parallel port driver
[ 21.412529] HP WMI: Unknown event_id - 0 - 0x0
[ 21.696363] Intel AES-NI instructions are not detected.
[ 21.710084] padlock_aes: VIA PadLock not detected.
[ 21.733776] padlock_sha: VIA PadLock Hash Engine not detected.
[ 22.478607] Adding 4586520k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:4586520k
[ 23.715398] vboxdrv: Found 2 processor cores.
[ 23.715523] vboxdrv: fAsync=0 offMin=0x1ae offMax=0x1684
[ 23.715603] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 23.715606] vboxdrv: Successfully loaded version 4.0.6 (interface 0x00180000).
[ 27.002714] EXT4-fs (sda9): re-mounted. Opts: errors=remount-ro,commit=0
[ 27.007536] EXT4-fs (sda8): re-mounted. Opts: commit=0
[ 27.044638] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4050000 action 0xf
[ 27.044644] ata2: SError: { PHYRdyChg CommWake DevExch }
[ 27.044657] ata2: hard resetting link
[ 28.072041] ata2: failed to resume link (SControl 0)
[ 28.083055] ata2: SATA link down (SStatus 4 SControl 0)
[ 28.083083] ata2: EH complete
[ 983.385666] usb 2-6: USB disconnect, address 4
[ 985.636268] usb 2-6: new high speed USB device using ehci_hcd and address 5
[ 985.803605] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 985.803613] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 985.803617] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 985.803622] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 985.803627] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 985.803631] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 985.803636] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 985.803640] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 985.803645] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 985.803649] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 985.803653] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 985.803658] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 985.803662] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 985.803667] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 985.803671] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 985.803676] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 985.803680] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 985.803685] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 985.803689] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 985.803694] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 985.803698] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 985.803703] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 985.803707] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 985.803711] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 985.803716] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 985.803720] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 985.803725] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 985.803729] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 985.803909] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[ 985.806068] Registered led device: rt2800usb-phy1::radio
[ 985.806118] Registered led device: rt2800usb-phy1::assoc
[ 985.806167] Registered led device: rt2800usb-phy1::quality
[ 985.869371] <30>udev[555]: renamed network interface wlan0 to wlan1
[ 986.303879] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1101.380214] ecryptfs_parse_options: eCryptfs: unrecognized option [ecryptfs_check_dev_ruid]
[ 1110.279102] Valid eCryptfs headers not found in file header region or xattr region
[ 1110.279108] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO
[ 1120.374715] usb 2-6: USB disconnect, address 5
[ 1120.700037] usb 2-6: new high speed USB device using ehci_hcd and address 6
[ 1120.866350] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 1120.866355] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1120.866358] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 1120.866360] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1120.866363] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 1120.866366] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1120.866368] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 1120.866371] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1120.866373] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 1120.866376] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1120.866378] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 1120.866381] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1120.866384] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 1120.866386] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1120.866389] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 1120.866391] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1120.866394] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 1120.866396] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1120.866399] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 1120.866402] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1120.866404] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 1120.866407] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1120.866409] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 1120.866412] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1120.866414] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 1120.866417] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1120.866419] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 1120.866422] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1120.866541] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[ 1120.867352] Registered led device: rt2800usb-phy2::radio
[ 1120.867386] Registered led device: rt2800usb-phy2::assoc
[ 1120.867413] Registered led device: rt2800usb-phy2::quality
[ 1120.908911] <30>udev[3002]: renamed network interface wlan0 to wlan1
[ 1121.243857] usb 2-6: USB disconnect, address 6
[ 1121.572040] usb 2-6: new high speed USB device using ehci_hcd and address 7
[ 1121.741100] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 1121.741104] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1121.741107] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 1121.741110] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1121.741112] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 1121.741115] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1121.741117] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 1121.741120] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1121.741122] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 1121.741125] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1121.741127] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 1121.741130] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1121.741132] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 1121.741135] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1121.741138] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 1121.741140] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1121.741143] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 1121.741145] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1121.741148] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 1121.741151] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1121.741153] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 1121.741156] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1121.741158] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 1121.741161] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1121.741163] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 1121.741166] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1121.741168] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 1121.741171] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1121.741290] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht'
[ 1121.742055] Registered led device: rt2800usb-phy3::radio
[ 1121.742085] Registered led device: rt2800usb-phy3::assoc
[ 1121.742113] Registered led device: rt2800usb-phy3::quality
[ 1121.792814] <30>udev[3002]: renamed network interface wlan0 to wlan1
[ 1122.083388] usb 2-6: USB disconnect, address 7
[ 1125.688285] usb 2-6: new high speed USB device using ehci_hcd and address 8
[ 1125.869478] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 1125.869484] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1125.869486] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 1125.869489] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1125.869491] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 1125.869494] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1125.869496] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 1125.869499] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1125.869502] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 1125.869504] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1125.869507] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 1125.869509] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1125.869512] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 1125.869514] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1125.869517] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 1125.869519] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1125.869522] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 1125.869524] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1125.869527] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 1125.869529] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1125.869532] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 1125.869535] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1125.869537] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 1125.869540] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1125.869542] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 1125.869545] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1125.869547] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 1125.869550] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1125.869681] ieee80211 phy4: Selected rate control algorithm 'minstrel_ht'
[ 1125.870574] Registered led device: rt2800usb-phy4::radio
[ 1125.870604] Registered led device: rt2800usb-phy4::assoc
[ 1125.870631] Registered led device: rt2800usb-phy4::quality
[ 1125.915741] usb 2-6: USB disconnect, address 8
[ 1125.921053] <30>udev[3538]: renamed network interface wlan0 to wlan1
[ 1126.240271] usb 2-6: new high speed USB device using ehci_hcd and address 9
[ 1126.407509] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 1126.407516] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1126.407520] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 1126.407525] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1126.407529] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 1126.407535] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1126.407539] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 1126.407544] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1126.407548] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 1126.407553] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1126.407557] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 1126.407562] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1126.407566] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 1126.407570] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1126.407575] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 1126.407579] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1126.407583] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 1126.407588] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1126.407592] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 1126.407597] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1126.407601] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 1126.407606] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1126.407610] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 1126.407615] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1126.407619] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 1126.407623] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1126.407628] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 1126.407632] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1126.407843] ieee80211 phy5: Selected rate control algorithm 'minstrel_ht'
[ 1126.409502] Registered led device: rt2800usb-phy5::radio
[ 1126.409551] Registered led device: rt2800usb-phy5::assoc
[ 1126.409600] Registered led device: rt2800usb-phy5::quality
[ 1126.473690] <30>udev[3538]: renamed network interface wlan0 to wlan1
[ 1126.895769] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1131.297101] hub 2-0:1.0: port 6 disabled by hub (EMI?), re-enabling...
[ 1131.297108] usb 2-6: USB disconnect, address 9
[ 1131.664068] usb 2-6: new high speed USB device using ehci_hcd and address 10
[ 1131.836626] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 1131.836633] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1131.836637] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 1131.836642] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1131.836646] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 1131.836651] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1131.836655] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 1131.836660] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1131.836664] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 1131.836669] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1131.836673] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 1131.836677] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1131.836682] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 1131.836686] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1131.836690] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 1131.836695] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1131.836699] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 1131.836704] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1131.836708] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 1131.836713] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1131.836717] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 1131.836722] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1131.836726] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 1131.836731] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1131.836735] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 1131.836739] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1131.836744] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 1131.836748] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 1131.837065] ieee80211 phy6: Selected rate control algorithm 'minstrel_ht'
[ 1131.839466] Registered led device: rt2800usb-phy6::radio
[ 1131.839513] Registered led device: rt2800usb-phy6::assoc
[ 1131.839557] Registered led device: rt2800usb-phy6::quality
[ 1131.897126] <30>udev[3538]: renamed network interface wlan0 to wlan1
[ 1132.413491] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 1138.829000] ecryptfs_parse_options: eCryptfs: unrecognized option [ecryptfs_check_dev_ruid]
[ 1141.213168] Valid eCryptfs headers not found in file header region or xattr region
[ 1141.213172] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO
[ 1157.965203] wlan1: authenticate with 00:1e:58:34:5b:b3 (try 1)
[ 1157.966696] wlan1: authenticated
[ 1157.966730] wlan1: associate with 00:1e:58:34:5b:b3 (try 1)
[ 1157.970339] wlan1: RX AssocResp from 00:1e:58:34:5b:b3 (capab=0x431 status=0 aid=1)
[ 1157.970344] wlan1: associated
[ 1157.981856] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 1157.983333] cfg80211: Calling CRDA for country: NA
[ 1168.176010] wlan1: no IPv6 routers present
[ 1206.586851] exe (4803): /proc/4803/oom_adj is deprecated, please use /proc/4803/oom_score_adj instead.
[ 2353.806515] usb 2-6: USB disconnect, address 10
[ 2353.820756] wlan1: deauthenticating from 00:1e:58:34:5b:b3 by local choice (reason=3)
[ 2353.844236] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2353.844244] cfg80211: Restoring regulatory settings
[ 2353.844252] cfg80211: Calling CRDA to update world regulatory domain
[ 2353.851043] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2353.851050] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2353.851055] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2353.851060] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2353.851064] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2353.851069] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2353.851073] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2353.851078] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2353.851082] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2353.851086] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2353.851090] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2353.851095] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2353.851099] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2353.851104] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2353.851108] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2353.851112] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2353.851117] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2353.851121] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2353.851125] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2353.851130] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2353.851134] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2353.851138] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2353.851143] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 2353.851147] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2353.851151] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 2353.851156] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2353.851160] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 2353.851165] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2353.851170] cfg80211: World regulatory domain updated:
[ 2353.851173] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2353.851178] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2353.851183] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2353.851187] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2353.851192] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2353.851196] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2354.180098] usb 2-6: new high speed USB device using ehci_hcd and address 11
[ 2354.354311] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2354.354315] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2354.354317] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2354.354320] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2354.354322] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2354.354325] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2354.354328] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2354.354330] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2354.354333] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2354.354335] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2354.354338] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2354.354340] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2354.354343] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2354.354345] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2354.354348] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2354.354351] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2354.354353] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2354.354356] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2354.354358] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2354.354361] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2354.354363] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2354.354366] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2354.354368] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 2354.354371] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2354.354373] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 2354.354376] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2354.354378] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 2354.354381] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2354.354523] ieee80211 phy7: Selected rate control algorithm 'minstrel_ht'
[ 2354.355470] Registered led device: rt2800usb-phy7::radio
[ 2354.355503] Registered led device: rt2800usb-phy7::assoc
[ 2354.355533] Registered led device: rt2800usb-phy7::quality
[ 2354.405078] <30>udev[3799]: renamed network interface wlan0 to wlan1
[ 2354.845974] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 2358.446881] usb 2-6: USB disconnect, address 11
[ 2360.236261] sky2 0000:84:00.0: eth0: disabling interface
[ 2360.245977] sky2 0000:84:00.0: eth0: enabling interface
[ 2360.246358] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2360.428046] usb 2-6: new high speed USB device using ehci_hcd and address 12
[ 2360.605340] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 2360.605347] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2360.605351] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 2360.605357] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2360.605361] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 2360.605365] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2360.605370] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 2360.605375] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2360.605379] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 2360.605383] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2360.605388] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 2360.605392] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2360.605396] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 2360.605401] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2360.605405] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 2360.605410] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2360.605414] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 2360.605419] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2360.605423] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 2360.605428] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2360.605432] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 2360.605436] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2360.605441] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 2360.605445] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2360.605450] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 2360.605454] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2360.605459] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 2360.605463] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 2360.605640] ieee80211 phy8: Selected rate control algorithm 'minstrel_ht'
[ 2360.607448] Registered led device: rt2800usb-phy8::radio
[ 2360.607505] Registered led device: rt2800usb-phy8::assoc
[ 2360.607559] Registered led device: rt2800usb-phy8::quality
[ 2360.657082] <30>udev[6767]: renamed network interface wlan0 to wlan1
[ 2361.214585] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 2376.631255] wlan1: authenticate with 00:1e:58:34:5b:b3 (try 1)
[ 2376.632779] wlan1: authenticated
[ 2378.243014] wlan1: associate with 00:1e:58:34:5b:b3 (try 1)
[ 2378.245291] wlan1: RX AssocResp from 00:1e:58:34:5b:b3 (capab=0x431 status=0 aid=1)
[ 2378.245297] wlan1: associated
[ 2378.257484] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 2378.258725] cfg80211: Calling CRDA for country: NA
[ 2389.072253] wlan1: no IPv6 routers present
[ 2534.735188] cfg80211: Found new beacon on frequency: 2467 MHz (Ch 12) on phy8
[ 2534.735214] cfg80211: Pending regulatory request, waiting for it to be processed...
[16031.391421] ardour-2.8.11[24087]: segfault at b73bccf8 ip 006546f0 sp bff88dd0 error 4 in libpthread-2.13.so[649000+15000]
[16075.481726] render error detected, EIR: 0x00000010
[16075.481733] IPEIR: 0x00000000
[16075.481737] IPEHR: 0x00000000
[16075.481741] INSTDONE: 0xfffffffe
[16075.481744] INSTPS: 0x0001e000
[16075.481747] INSTDONE1: 0xffffffff
[16075.481750] ACTHD: 0x72e0d840
[16075.481753] page table error
[16075.481756] PGTBL_ER: 0x00000001
[16075.481761] [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking
[16239.485516] ardour-2.8.11[25015]: segfault at b1369cf8 ip 00b096f0 sp bff21f50 error 4 in libpthread-2.13.so[afe000+15000]
[18492.784080] usb 6-1: USB disconnect, address 2
[18507.468109] usb 6-1: new low speed USB device using uhci_hcd and address 4
[18507.662085] input: USB LaserStream(TM) Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input9
[18507.662340] generic-usb 0003:192F:0716.0002: input,hidraw0: USB HID v1.11 Mouse [USB LaserStream(TM) Mouse] on usb-0000:00:1d.0-1/input0
[19708.822326] wlan1: deauthenticating from 00:1e:58:34:5b:b3 by local choice (reason=3)
[19710.458332] cfg80211: All devices are disconnected, going to restore regulatory settings
[19710.458340] cfg80211: Restoring regulatory settings
[19710.458350] cfg80211: Calling CRDA to update world regulatory domain
[19710.558359] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[19710.558363] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[19710.558365] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[19710.558368] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[19710.558371] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[19710.558373] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[19710.558376] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[19710.558378] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[19710.558381] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[19710.558383] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[19710.558386] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[19710.558388] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[19710.558391] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[19710.558393] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[19710.558396] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[19710.558398] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[19710.558401] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[19710.558403] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[19710.558406] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[19710.558408] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[19710.558411] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[19710.558413] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[19710.558416] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[19710.558418] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[19710.558421] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[19710.558423] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[19710.558426] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[19710.558428] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[19710.558431] cfg80211: World regulatory domain updated:
[19710.558433] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[19710.558436] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19710.558439] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[19710.558442] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[19710.558444] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19710.558447] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[19711.610417] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[19711.820292] sky2 0000:84:00.0: eth0: disabling interface
[19711.829448] sky2 0000:84:00.0: eth0: enabling interface
[19711.829823] ADDRCONF(NETDEV_UP): eth0: link is not ready
[19729.425250] ecryptfs_parse_options: eCryptfs: unrecognized option [ecryptfs_check_dev_ruid]
[19739.388254] Valid eCryptfs headers not found in file header region or xattr region
[19739.388258] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO
[19761.313207] wlan1: authenticate with 00:1e:58:34:5b:b3 (try 1)
[19761.314594] wlan1: authenticated
[19762.923458] wlan1: associate with 00:1e:58:34:5b:b3 (try 1)
[19762.925964] wlan1: RX AssocResp from 00:1e:58:34:5b:b3 (capab=0x431 status=0 aid=1)
[19762.925968] wlan1: associated
[19762.934151] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[19762.935239] cfg80211: Calling CRDA for country: NA
[19773.704047] wlan1: no IPv6 routers present
Just wondering if there's anything clearly wrong here so that I can try to avoid this in the future. Thank you.
