Results 1 to 1 of 1

Thread: Random Jack failure or user error

  1. #1
    Join Date
    Mar 2008
    Location
    U.S.A.
    Beans
    502
    Distro
    Ubuntu Gnome 14.04 Trusty Tahr

    Random Jack failure or user error

    I cut off my computer last night which was running a generic kernel and jackd version 0.118.0. We were recording last night with no problems.

    I wake up this morning to find jack constantly failing. I've had the normal problems setting jack up, but this one is different.

    Here's the output.

    Code:
    14:15:29.158 Patchbay deactivated.
    14:15:29.160 Statistics reset.
    14:15:29.170 ALSA connection graph change.
    14:15:29.367 ALSA connection change.
    14:15:56.881 Startup script...
    14:15:56.882 artsshell -q terminate
    sh: artsshell: not found
    14:15:57.284 Startup script terminated with exit status=32512.
    14:15:57.284 JACK is starting...
    14:15:57.285 /usr/bin/jackd -r -dalsa -dhw:0 -r44100 -p1024 -n2 -s
    jackd 0.118.0
    Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others.
    jackd comes with ABSOLUTELY NO WARRANTY
    This is free software, and you are welcome to redistribute it
    under certain conditions; see the file COPYING for details
    14:15:57.292 JACK was started with PID=6741.
    no message buffer overruns
    JACK compiled with System V SHM support.
    loading driver ..
    apparent rate = 44100
    creating alsa driver ... hw:0|hw:0|1024|2|44100|0|0|nomon|swmeter|soft-mode|32bit
    control device hw:0
    configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 2 periods
    ALSA: final selected sample format for capture: 32bit integer little-endian
    ALSA: use 2 periods for capture
    ALSA: final selected sample format for playback: 32bit integer little-endian
    ALSA: use 2 periods for playback
    14:15:59.347 Server configuration saved to "/home/ben/.jackdrc".
    14:15:59.348 Statistics reset.
    14:15:59.349 Client activated.
    14:15:59.357 JACK connection change.
    14:15:59.360 JACK connection graph change.
    ALSA: poll time out, polled for 34862333 usecs
    DRIVER NT: could not run driver cycle
    14:16:32.168 JACK connection graph change.
    jack main caught signal 12
    cannot continue execution of the processing graph (Broken pipe)
    cannot continue execution of the processing graph (Broken pipe)
    14:16:32.186 Client deactivated.
    cannot continue execution of the pro
    14:16:32.187 JACK was stopped successfully.
    14:16:32.188 Post-shutdown script...
    14:16:32.188 killall jackd
    cessing graph (Broken pipe)
    cannot continue execution of the processing graph (Broken pipe)
    cannot continue execution of the processing graph (Broken pipe)
    14:16:32.614 Post-shutdown script terminated with exit status=256.
    cannot continue execution of the processing graph (Broken pipe)
    cannot continue execution of the processing graph (Broken pipe)
    jackd: no process found
    For the forum's sake, I remove the hundreds of lines that said "cannot continue execution of the processing graph (Broken pipe)"

    Can anyone help me out? The card is an RME HDSP MADI and this is Ubuntu 10.04 desktop.

    lshw:

    Code:
    ben@DAW:~$ sudo lshw -C multimedia
    [sudo] password for ben: 
      *-multimedia            
           description: Multimedia audio controller
           product: RME Hammerfall DSP MADI
           vendor: Xilinx Corporation
           physical id: 7
           bus info: pci@0000:04:07.0
           version: cf
           width: 32 bits
           clock: 33MHz
           capabilities: bus_master
           configuration: driver=RME Hammerfall DSP MADI latency=64
           resources: irq:19 memory:dbff0000-dbffffff
    /etc/security/limit.conf

    Code:
    ben@DAW:~$ sudo cat /etc/security/limits.conf 
    # /etc/security/limits.conf
    #
    #Each line describes a limit for a user in the form:
    #
    #<domain>        <type>  <item>  <value>
    #
    #Where:
    #<domain> can be:
    #        - an user name
    #        - a group name, with @group syntax
    #        - the wildcard *, for default entry
    #        - the wildcard %, can be also used with %group syntax,
    #                 for maxlogin limit
    #        - NOTE: group and wildcard limits are not applied to root.
    #          To apply a limit to the root user, <domain> must be
    #          the literal username root.
    #
    #<type> can have the two values:
    #        - "soft" for enforcing the soft limits
    #        - "hard" for enforcing hard limits
    #
    #<item> can be one of the following:
    #        - core - limits the core file size (KB)
    #        - data - max data size (KB)
    #        - fsize - maximum filesize (KB)
    #        - memlock - max locked-in-memory address space (KB)
    #        - nofile - max number of open files
    #        - rss - max resident set size (KB)
    #        - stack - max stack size (KB)
    #        - cpu - max CPU time (MIN)
    #        - nproc - max number of processes
    #        - as - address space limit (KB)
    #        - maxlogins - max number of logins for this user
    #        - maxsyslogins - max number of logins on the system
    #        - priority - the priority to run user process with
    #        - locks - max number of file locks the user can hold
    #        - sigpending - max number of pending signals
    #        - msgqueue - max memory used by POSIX message queues (bytes)
    #        - nice - max nice priority allowed to raise to values: [-20, 19]
    #        - rtprio - max realtime priority
    #        - chroot - change root to directory (Debian-specific)
    #
    #<domain>      <type>  <item>         <value>
    #
    
    #*               soft    core            0
    #root            hard    core            100000
    #*               hard    rss             10000
    #@student        hard    nproc           20
    #@faculty        soft    nproc           20
    #@faculty        hard    nproc           50
    #ftp             hard    nproc           0
    #ftp             -       chroot          /ftp
    #@student        -       maxlogins       4
    @realtime - rtprio 99
    @realtime - memlock unlimited
    #@realtime - nice -10
    # End of file
    Last edited by pepsifx357; November 12th, 2011 at 08:26 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •