Results 1 to 2 of 2

Thread: Mounting hardrive from lacie network space 2

  1. #1
    Join Date
    Jul 2010
    Beans
    85

    Mounting hardrive from lacie network space 2

    Hi,

    I have a lacie network 2
    http://lacie.nas-central.org/wiki/Ca...etwork_Space_2

    It failed to reset so I have dismantle it and try to backup my data.

    lsblk
    Code:
    sde       8:64   0 931.5G  0 disk 
    ├─sde1    8:65   0     1K  0 part 
    ├─sde2    8:66   0 929.6G  0 part 
    ├─sde5    8:69   0   251M  0 part 
    ├─sde6    8:70   0   7.8M  0 part 
    ├─sde7    8:71   0   7.8M  0 part 
    ├─sde8    8:72   0 831.5M  0 part 
    ├─sde9    8:73   0   855M  0 part 
    └─sde10   8:74   0   7.8M  0 part
    The data is on sde2 partition. I assume this is xfs partition.

    fdisk -l does not provide any information on sde hardrive.

    "sudo mount -t xfs /dev/sde2 /media/test" returns
    Code:
    mount: /dev/sde2: can't read superblock
    "sudo xfs_check /dev/sde2" returns
    Code:
    xfs_check: /dev/sde2 is invalid (cannot read first 512 bytes)
    "sudo xfs_repair /dev/sde2" returns
    Code:
    Phase 1 - find and verify superblock...
    superblock read failed, offset 0, size 524288, ag 0, rval -1
    fatal error -- Input/output error
    "sudo mdadm /dev/sde2" retuns
    Code:
    /dev/sde2: is not an md array
    Any idea in which direction I should look?

    THanks

  2. #2
    Join Date
    Jul 2010
    Beans
    85

    Re: Mounting hardrive from lacie network space 2

    Hi,

    I will try testdisk later today
    http://www.cgsecurity.org/wiki/TestDisk

    Any other tool you would see helpfull here?

    BR

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •