Wireless problems hp probook 4330s

[airplanesimen]

i got some problems. My network card wont work, and i tried theese commands to get it work (i read it somwhere):

$sudo modprobe -rf rt2800pci
$sudo modprobe -rf rt2860sta
$sudo modprobe rt2860sta

It all started with my network interface saying that my wireless device wasnt ready. i typed:

Sudo ifconfig wlan0 up

i have this network card: Realtek Ethernet (10/100/1000 NIC)
HP lc2010 HSPA
Ralink 802.11b/g/n Wi-Fi

but it didnt work. i have the hp probook 4330s, and i have 11.10 ubuntu on it, and everyone with this computer got the same problem with their networkcard. so? any suggestions what to do to recover these drivers, or fix my big problem?
When the driver is working, my networkconnection wont. i cant even see the networks in range?!

[nothingspecial]

Please do not hijack someone else's thread.

I have moved your question to it's own thread.

[airplanesimen]

Please do not hijack someone else's thread.

I have moved your question to it's own thread.

So sorry! Thanks for moving it!

[praseodym]

Hi, please show:

lspci -nnk | grep -iA2 net
lsmod
rfkill list
sudo iwlist scan
dmesg | grep rt2

Use driver rt2800pci in 11.10

[airplanesimen]

Hi, please show:

lspci -nnk | grep -iA2 net
lsmod
rfkill list
sudo iwlist scan
dmesg | grep rt2

Use driver rt2800pci in 11.10

Thanks, but i am not that good in ubuntu. that driver, how do i install it inside the terminal? normal like

sudo apt-get install rt2800pci

?

i am going to enter ubuntu to check those values, and show them here wait to my next reply

[praseodym]

Its:

sudo modprobe rt2800pci

to load the module, the driver is already part of the kernel.

[airplanesimen]

Here is the results:

for the first line u asked for:

24:00.0 Network controller [0280]: Ralink corp. Device [1814:3592] 
	Subsystem: Hewlett-Packard Company Device [103c:1638] 
	Kernel driver in use: rt2800pci 
-- 
25:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) 
	Subsystem: Hewlett-Packard Company Device [103c:167f] 
	Kernel driver in use: r8169

LSMOD:

Module                  Size  Used by 
parport_pc             32114  0  
ppdev                  12849  0  
snd_hda_codec_hdmi     31426  1  
snd_hda_codec_idt      60049  1  
rfcomm                 38408  0  
bnep                   17923  2  
bluetooth             148839  10 rfcomm,bnep 
binfmt_misc            17292  1  
joydev                 17393  0  
uvcvideo               67271  0  
videodev               85626  1 uvcvideo 
hp_wmi                 13652  0  
sparse_keymap          13658  1 hp_wmi 
snd_hda_intel          24262  2  
snd_hda_codec          91754  3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel 
snd_hwdep              13276  1 snd_hda_codec 
snd_pcm                80468  3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec 
arc4                   12473  2  
rt2800pci              18340  0  
rt2800lib              48717  1 rt2800pci 
crc_ccitt              12595  1 rt2800lib 
rt2x00pci              14202  1 rt2800pci 
rt2x00lib              48114  3 rt2800pci,rt2800lib,rt2x00pci 
mac80211              272785  3 rt2800lib,rt2x00pci,rt2x00lib 
cfg80211              172392  2 rt2x00lib,mac80211 
eeprom_93cx6           12653  1 rt2800pci 
psmouse                73673  0  
serio_raw              12990  0  
snd_seq_midi           13132  0  
snd_rawmidi            25241  1 snd_seq_midi 
jmb38x_ms              17406  0  
snd_seq_midi_event     14475  1 snd_seq_midi 
memstick               15857  1 jmb38x_ms 
snd_seq                51567  2 snd_seq_midi,snd_seq_midi_event 
hp_accel               21632  0  
lis3lv02d              19280  1 hp_accel 
input_polldev          13648  1 lis3lv02d 
i915                  505108  3  
wmi                    18744  1 hp_wmi 
snd_timer              28932  2 snd_pcm,snd_seq 
snd_seq_device         14172  3 snd_seq_midi,snd_rawmidi,snd_seq 
drm_kms_helper         32889  1 i915 
drm                   192226  4 i915,drm_kms_helper 
snd                    55902  14 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device 
i2c_algo_bit           13199  1 i915 
video                  18908  1 i915 
soundcore              12600  1 snd 
mei                    36466  0  
snd_page_alloc         14115  2 snd_hda_intel,snd_pcm 
lp                     17455  0  
parport                40930  3 parport_pc,ppdev,lp 
ahci                   21634  2  
libahci                25727  1 ahci 
r8169                  43104  0  
xhci_hcd               72915  0  
sdhci_pci              13658  0  
sdhci                  27360  1 sdhci_pci

RFKILL list:

0: phy0: Wireless LAN 
	Soft blocked: no 
	Hard blocked: no 
1: hp-wifi: Wireless LAN 
	Soft blocked: no 
	Hard blocked: no 
2: hp-bluetooth: Bluetooth 
	Soft blocked: no
	Hard blocked: no

The Last one was like this:

lo        Interface doesn't support scanning. 
 
eth0      Interface doesn't support scanning. 
 
wlan0     No scan results

one more thing: My driver is there now, but i cant find ANY network, it doesnt work like it should -_-
when i click on the network icon, it shows under wireless: "device not ready".
So i used

sudo iwconfig wlan0 up

and now it is only "disconnected"

[praseodym]

Check your router settings, namely "MAC-address filtering" if your card is allowed. Router firmware is up-to-date?

Check now:

iwconfig
sudo iwlist scan
iwlist chan
dmesg | grep rt2

Which encryption do you use? Best ist WPA2-AES, not mixed WPA/WPA2.

[airplanesimen]

Check your router settings, namely "MAC-address filtering" if your card is allowed. Router firmware is up-to-date?

Check now:

iwconfig
sudo iwlist scan
iwlist chan
dmesg | grep rt2

Which encryption do you use? Best ist WPA2-AES, not mixed WPA/WPA2.

this is a home network with wep encryption. It works well in windows 7, but i cant find any network in linux. yes, my router firmware is up to date and no filters are active on my router ^^ i do wonder what to do to fix this issue? i need to find the router first, before i check my router settings?

[praseodym]

Please show the outputs.