Ubuntu 10.04 LTS AMD64 - Upgrade to 2.6.32-33 Doesn't boot anymore

**SteDolphin** · July 18th, 2011

Hi there,

This morning I switched my machine and the Update Manager prompted me to upgrade.

So, as usual I did it. After upgrade it asked me to restart.

Since then id didn't boot anymore. Now I have blank screen with a blinking cursor ... immediately after the BIOS screen, so it looks that no OS is loaded.

THANKS in advance.

Steve

**lmarmisa** · July 18th, 2011

Did the Update Manager prompt you to update or to upgrade to a newer version of Ubuntu?.

**SteDolphin** · July 18th, 2011

NO, it was just an update. I did not upgraded to 11.04, as 10.04 is an LTS.

**lmarmisa** · July 18th, 2011

Are you able to boot into older kernel versions at startup?.

Hold down SHIFT to display the GRUB menu during boot. In certain cases, pressing the ESC key may also display the menu.

**SteDolphin** · July 18th, 2011

NO, I can't. Neither ESC or Shift brings the Grub menu ...

**lmarmisa** · July 18th, 2011

Originally Posted by SteDolphin

NO, I can't. Neither ESC or Shift brings the Grub menu ...

Check if you are able to switch to a tty terminal. Type Alt+Ctr+F1 (there are 6 ttys from F1 to F6) after you get the blank screen with the blinking cursor.

**SteDolphin** · July 18th, 2011

That doesn't work too ...

The problem is that it hangs too fast after the boot. Like is not loading any module.

**lmarmisa** · July 18th, 2011

Boot into an Ubuntu Live CD / USB, Try Ubuntu, open Firefox and go to the web page:

http://bootinfoscript.sourceforge.net/

Then follow the instructions of that page in order to download and run the boot info script.

Finally post the results in this thread.

Best regards,

Luis

**SteDolphin** · July 18th, 2011

Here we go ... this is the result

Code:

                  Boot Info Script 0.60    from 17 May 2011


============================= Boot Info Summary: ===============================

 => Grub2 (v1.97-1.98) is installed in the MBR of /dev/sda and looks at sector 
    1 of the same hard drive for core.img. core.img is at this location and 
    looks in partition 1 for /boot/grub.
 => No boot loader is installed in the MBR of /dev/sdb.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  Ubuntu 10.04.2 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info:  

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info:  

sdb1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info:  
    Operating System:  
    Boot files:        

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *          2,048   390,625,279   390,623,232  83 Linux
/dev/sda2         390,627,326   391,604,223       976,898   5 Extended
/dev/sda5         390,627,328   391,604,223       976,896  82 Linux swap / Solaris


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1                  63 1,953,520,064 1,953,520,002  83 Linux


"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sda1        fa50dc45-3ae0-40a8-85f4-4610e9dabe30   ext4       
/dev/sda5        ba7c825d-3836-48d9-95bf-6bad5f4066d6   swap       
/dev/sdb1        91a18bfc-e33c-4fc1-b39f-4101a5eb9a13   ext4       DataDisk

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sr0         /cdrom                   iso9660    (ro,noatime)


=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
  set saved_entry=${prev_saved_entry}
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z ${boot_once} ]; then
    saved_entry=${chosen}
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=640x480
  insmod gfxterm
  insmod vbe
  if terminal_output gfxterm ; then true ; else
    # For backward compatibility with versions of terminal.mod that don't
    # understand terminal_output
    terminal gfxterm
  fi
fi
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-33-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	linux	/boot/vmlinuz-2.6.32-33-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro   quiet splash
	initrd	/boot/initrd.img-2.6.32-33-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-33-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	echo	'Loading Linux 2.6.32-33-generic ...'
	linux	/boot/vmlinuz-2.6.32-33-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro single 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-2.6.32-33-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-32-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	linux	/boot/vmlinuz-2.6.32-32-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro   quiet splash
	initrd	/boot/initrd.img-2.6.32-32-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-32-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	echo	'Loading Linux 2.6.32-32-generic ...'
	linux	/boot/vmlinuz-2.6.32-32-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro single 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-2.6.32-32-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-31-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	linux	/boot/vmlinuz-2.6.32-31-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro   quiet splash
	initrd	/boot/initrd.img-2.6.32-31-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	echo	'Loading Linux 2.6.32-31-generic ...'
	linux	/boot/vmlinuz-2.6.32-31-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro single 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-2.6.32-31-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-30-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	linux	/boot/vmlinuz-2.6.32-30-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro   quiet splash
	initrd	/boot/initrd.img-2.6.32-30-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	echo	'Loading Linux 2.6.32-30-generic ...'
	linux	/boot/vmlinuz-2.6.32-30-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro single 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-2.6.32-30-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	linux	/boot/vmlinuz-2.6.32-29-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro   quiet splash
	initrd	/boot/initrd.img-2.6.32-29-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	echo	'Loading Linux 2.6.32-29-generic ...'
	linux	/boot/vmlinuz-2.6.32-29-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro single 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-2.6.32-29-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-28-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	linux	/boot/vmlinuz-2.6.32-28-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro   quiet splash
	initrd	/boot/initrd.img-2.6.32-28-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	echo	'Loading Linux 2.6.32-28-generic ...'
	linux	/boot/vmlinuz-2.6.32-28-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro single 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-2.6.32-28-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-27-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	linux	/boot/vmlinuz-2.6.32-27-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro   quiet splash
	initrd	/boot/initrd.img-2.6.32-27-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-27-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	echo	'Loading Linux 2.6.32-27-generic ...'
	linux	/boot/vmlinuz-2.6.32-27-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro single 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-2.6.32-27-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-26-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	linux	/boot/vmlinuz-2.6.32-26-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro   quiet splash
	initrd	/boot/initrd.img-2.6.32-26-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	echo	'Loading Linux 2.6.32-26-generic ...'
	linux	/boot/vmlinuz-2.6.32-26-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro single 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-2.6.32-26-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-25-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	linux	/boot/vmlinuz-2.6.32-25-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro   quiet splash
	initrd	/boot/initrd.img-2.6.32-25-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-25-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	echo	'Loading Linux 2.6.32-25-generic ...'
	linux	/boot/vmlinuz-2.6.32-25-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro single 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-2.6.32-25-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	linux	/boot/vmlinuz-2.6.32-24-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro   quiet splash
	initrd	/boot/initrd.img-2.6.32-24-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
	recordfail
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	echo	'Loading Linux 2.6.32-24-generic ...'
	linux	/boot/vmlinuz-2.6.32-24-generic root=UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 ro single 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-2.6.32-24-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	linux16	/boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
	insmod ext2
	set root='(hd0,1)'
	search --no-floppy --fs-uuid --set fa50dc45-3ae0-40a8-85f4-4610e9dabe30
	linux16	/boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
  if keystatus; then
    if keystatus --shift; then
      set timeout=-1
    else
      set timeout=0
    fi
  else
    if sleep --interruptible 3 ; then
      set timeout=0
    fi
  fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda1 during installation
UUID=fa50dc45-3ae0-40a8-85f4-4610e9dabe30 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=ba7c825d-3836-48d9-95bf-6bad5f4066d6 none            swap    sw              0       0

# DEV/SDB1
/dev/sdb1	/media/DataDisk	ext4	defaults,errors=remount-ro	0	0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

   4.126247406 = 4.430524416    boot/grub/core.img                             1
 148.800361633 = 159.773171712  boot/grub/grub.cfg                             2
   4.258693695 = 4.572737536    boot/initrd.img-2.6.32-24-generic              1
   4.469680786 = 4.799283200    boot/initrd.img-2.6.32-25-generic              1
   0.411087036 = 0.441401344    boot/initrd.img-2.6.32-26-generic              2
   4.297740936 = 4.614664192    boot/initrd.img-2.6.32-27-generic              1
   4.313266754 = 4.631334912    boot/initrd.img-2.6.32-28-generic              1
   3.707958221 = 3.981389824    boot/initrd.img-2.6.32-29-generic              2
 149.271690369 = 160.279257088  boot/initrd.img-2.6.32-30-generic              2
   0.293895721 = 0.315568128    boot/initrd.img-2.6.32-31-generic              2
 149.293937683 = 160.303144960  boot/initrd.img-2.6.32-32-generic              2
 150.510818481 = 161.609760768  boot/initrd.img-2.6.32-33-generic              2
   4.153186798 = 4.459450368    boot/vmlinuz-2.6.32-24-generic                 1
   4.262466431 = 4.576788480    boot/vmlinuz-2.6.32-25-generic                 1
   4.289974213 = 4.606324736    boot/vmlinuz-2.6.32-26-generic                 1
   4.281707764 = 4.597448704    boot/vmlinuz-2.6.32-27-generic                 1
   4.268482208 = 4.583247872    boot/vmlinuz-2.6.32-28-generic                 1
   4.301517487 = 4.618719232    boot/vmlinuz-2.6.32-29-generic                 1
 149.190303802 = 160.191868928  boot/vmlinuz-2.6.32-30-generic                 2
   4.348506927 = 4.669173760    boot/vmlinuz-2.6.32-31-generic                 1
   4.340686798 = 4.660776960    boot/vmlinuz-2.6.32-32-generic                 1
   4.379871368 = 4.702851072    boot/vmlinuz-2.6.32-33-generic                 1
 150.510818481 = 161.609760768  initrd.img                                     2
 149.293937683 = 160.303144960  initrd.img.old                                 2
   4.379871368 = 4.702851072    vmlinuz                                        1
   4.340686798 = 4.660776960    vmlinuz.old                                    1

========= Devices which don't seem to have a corresponding hard drive: =========

sdc sdd sde sdf

And thanks a lot for your help !!!

**lmarmisa** · July 18th, 2011

The results look pretty good. You have 10 different kernels but you are not able to boot into anyone!!!.

I recommend to reinstall grub following this procedure:

https://help.ubuntu.com/community/Grub2#ChRoot

I have added the change of one parameter in the file /etc/default/grub too.

Boot into an Ubuntu Live CD / USB, open a terminal and type:

Code:

sudo mount /dev/sda1 /mnt
sudo gedit /mnt/etc/default/grub

Then add the char # to the line

Code:

# GRUB_HIDDEN_TIMEOUT=0

Save & Quit.

Continue with these commands:

Code:

for i in /dev /dev/pts /proc /sys; do sudo mount -B $i /mnt$i; done
sudo chroot /mnt
update-grub
grub-install /dev/sda
grub-install --recheck /dev/sda
exit
for i in /sys /proc /dev/pts /dev; do sudo umount /mnt$i; done
sudo umount /mnt/usr
sudo umount /mnt
sudo reboot

Thread: Ubuntu 10.04 LTS AMD64 - Upgrade to 2.6.32-33 Doesn't boot anymore

Thread Tools

Display

Ubuntu 10.04 LTS AMD64 - Upgrade to 2.6.32-33 Doesn't boot anymore

Re: Ubuntu 10.04 LTS AMD64 - Upgrade to 2.6.32-33 Doesn't boot anymore

Re: Ubuntu 10.04 LTS AMD64 - Upgrade to 2.6.32-33 Doesn't boot anymore

Re: Ubuntu 10.04 LTS AMD64 - Upgrade to 2.6.32-33 Doesn't boot anymore

Re: Ubuntu 10.04 LTS AMD64 - Upgrade to 2.6.32-33 Doesn't boot anymore

Re: Ubuntu 10.04 LTS AMD64 - Upgrade to 2.6.32-33 Doesn't boot anymore

Re: Ubuntu 10.04 LTS AMD64 - Upgrade to 2.6.32-33 Doesn't boot anymore

Re: Ubuntu 10.04 LTS AMD64 - Upgrade to 2.6.32-33 Doesn't boot anymore

Re: Ubuntu 10.04 LTS AMD64 - Upgrade to 2.6.32-33 Doesn't boot anymore

Re: Ubuntu 10.04 LTS AMD64 - Upgrade to 2.6.32-33 Doesn't boot anymore

Bookmarks

Bookmarks

Posting Permissions