Code:
Module Size Used by
usb_storage 50377 0
lgs8gxx 12573 1
binfmt_misc 7960 1
ppdev 6375 0
nfsd 304374 11
lockd 75079 1 nfsd
nfs_acl 2709 1 nfsd
auth_rpcgss 44452 1 nfsd
sunrpc 228003 10 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 4202 1 nfsd
joydev 11104 0
xc5000 13475 2
tuner 20525 1
snd_hda_codec_atihdmi 3023 1
snd_hda_codec_analog 78702 1
ir_lirc_codec 4802 0
lirc_dev 14330 1 ir_lirc_codec
ir_sony_decoder 2261 0
ir_jvc_decoder 2386 0
ir_rc6_decoder 2834 0
ir_rc5_decoder 2290 0
ir_nec_decoder 2706 0
cx25840 43932 1
cx23885 142313 0
rc_core 19732 7 ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,ir_nec_decoder,cx23885
snd_hda_intel 25805 4
snd_hda_codec 85759 3 snd_hda_codec_atihdmi,snd_hda_codec_analog,snd_hda_intel
snd_hwdep 6924 1 snd_hda_codec
snd_pcm_oss 41394 0
snd_mixer_oss 16299 1 snd_pcm_oss
snd_pcm 87946 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 1782 0
snd_seq_oss 31191 0
snd_seq_midi 5829 0
snd_rawmidi 23420 1 snd_seq_midi
cx2341x 20093 1 cx23885
videobuf_dma_sg 9941 1 cx23885
videobuf_dvb 6180 1 cx23885
snd_seq_midi_event 7267 2 snd_seq_oss,snd_seq_midi
dvb_core 102292 2 cx23885,videobuf_dvb
videobuf_core 20300 3 cx23885,videobuf_dma_sg,videobuf_dvb
fbcon 39270 71
snd_seq 57481 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
tileblit 2487 1 fbcon
v4l2_common 11302 4 tuner,cx25840,cx23885,cx2341x
font 8053 1 fbcon
videodev 85001 5 tuner,cx25840,cx23885,cx2341x,v4l2_common
snd_timer 23649 2 snd_pcm,snd_seq
snd_seq_device 6888 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
media 13792 1 videodev
asus_atk0110 10033 0
hwmon_vid 3130 0
snd 71283 19 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
bitblit 5811 1 fbcon
softcursor 1565 1 bitblit
fglrx 2776051 242
vga16fb 12757 1
psmouse 64576 0
vgastate 9857 1 vga16fb
serio_raw 4918 0
i2c_piix4 9639 0
soundcore 8052 1 snd
snd_page_alloc 8500 2 snd_hda_intel,snd_pcm
v4l2_compat_ioctl32 8551 1 videodev
btcx_risc 4224 1 cx23885
tveeprom 14074 1 cx23885
edac_core 45423 0
lp 9336 0
edac_mce_amd 9278 0
parport 37160 2 ppdev,lp
usbhid 41116 0
hid 83600 1 usbhid
ohci1394 30260 0
ieee1394 94771 1 ohci1394
pata_atiixp 4209 0
r8169 39714 0
ahci 38030 6
mii 5237 1 r8169
dmesg:
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-32-generic (buildd@allspice) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #62-Ubuntu SMP Wed Apr 20 21:52:38 UTC 2011 (Ubuntu 2.6.32-32.62-generic 2.6.32.38+drm33.16)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-32-generic root=UUID=7efe8783-fc3b-4103-abe6-be6e6f80ade9 ro crashkernel=384M-2G:64M,2G-:128M quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7f90000 (usable)
[ 0.000000] BIOS-e820: 00000000c7f90000 - 00000000c7fa8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000c7fa8000 - 00000000c7fd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c7fd0000 - 00000000c8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000238000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x238000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF8000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000238000000 aka 9088M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c8000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xc7f90 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000c7f90000 (usable)
[ 0.000000] modified: 00000000c7f90000 - 00000000c7fa8000 (ACPI data)
[ 0.000000] modified: 00000000c7fa8000 - 00000000c7fd0000 (ACPI NVS)
[ 0.000000] modified: 00000000c7fd0000 - 00000000c8000000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000238000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000c7f90000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00c7e00000 page 2M
[ 0.000000] 00c7e00000 - 00c7f90000 page 4k
[ 0.000000] kernel direct mapping tables up to c7f90000 @ 10000-13000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000238000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0238000000 page 2M
[ 0.000000] kernel direct mapping tables up to 238000000 @ 12000-14000
[ 0.000000] RAMDISK: 3779c000 - 37fef7b4
[ 0.000000] ACPI: RSDP 00000000000fbd80 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000c7f90000 0003C (v01 091109 RSDT1458 20090911 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000c7f90200 00084 (v01 091109 FACP1458 20090911 MSFT 00000097)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557)
[ 0.000000] ACPI: DSDT 00000000c7f90440 0F4BE (v01 A1303 A1303000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000c7fa8000 00040
[ 0.000000] ACPI: APIC 00000000c7f90390 0006C (v01 091109 APIC1458 20090911 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000c7f90400 0003C (v01 091109 OEMMCFG 20090911 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000c7fa8040 00072 (v01 091109 OEMB1458 20090911 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000c7f9f910 00038 (v01 091109 OEMHPET 20090911 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000c7f9f950 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000238000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000238000000
[ 0.000000] NODE_DATA [0000000000013000 - 0000000000017fff]
[ 0.000000] bootmap [0000000000018000 - 000000000005efff] pages 47
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0238000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a30a64] TEXT DATA BSS ==> [0001000000 - 0001a30a64]
[ 0.000000] #3 [003779c000 - 0037fef7b4] RAMDISK ==> [003779c000 - 0037fef7b4]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [0001a31000 - 0001a312a4] BRK ==> [0001a31000 - 0001a312a4]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] Reserving 128MB of memory at 32MB for crashkernel (System RAM: 9088MB)
[ 0.000000] [ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00238000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000c7f90
[ 0.000000] 0: 0x00100000 -> 0x00238000
[ 0.000000] On node 0 totalpages: 2096927
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3825 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 800712 pages, LIFO batch:31
[ 0.000000] Normal zone: 17472 pages used for memmap
[ 0.000000] Normal zone: 1260480 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000c7f90000 - 00000000c7fa8000
[ 0.000000] PM: Registered nosave memory: 00000000c7fa8000 - 00000000c7fd0000
[ 0.000000] PM: Registered nosave memory: 00000000c7fd0000 - 00000000c8000000
[ 0.000000] PM: Registered nosave memory: 00000000c8000000 - 00000000ffe00000
[ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c8000000 (gap: c8000000:37e00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91864 r8192 d22824 u524288
[ 0.000000] pcpu-alloc: s91864 r8192 d22824 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065017
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-32-generic root=UUID=7efe8783-fc3b-4103-abe6-be6e6f80ade9 ro crashkernel=384M-2G:64M,2G-:128M quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 20000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] Memory: 8054600k/9306112k available (5411k kernel code, 918404k absent, 333108k reserved, 2982k data, 888k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 83886080 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3411.416 MHz processor.
[ 0.030004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6822.82 BogoMIPS (lpj=34114110)
[ 0.030019] Security Framework initialized
[ 0.030031] AppArmor: AppArmor initialized
[ 0.030458] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.032426] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.033306] Mount-cache hash table entries: 256
[ 0.033387] Initializing cgroup subsys ns
[ 0.033390] Initializing cgroup subsys cpuacct
[ 0.033392] Initializing cgroup subsys memory
[ 0.033397] Initializing cgroup subsys devices
[ 0.033398] Initializing cgroup subsys freezer
[ 0.033400] Initializing cgroup subsys net_cls
[ 0.033412] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.033414] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.033416] CPU 0/0x0 -> Node 0
[ 0.033418] tseg: 0000000000
[ 0.033427] CPU: Physical Processor ID: 0
[ 0.033428] CPU: Processor Core ID: 0
[ 0.033430] mce: CPU supports 6 MCE banks
[ 0.033437] Performance Events: AMD PMU driver.
[ 0.033440] ... version: 0
[ 0.033441] ... bit width: 48
[ 0.033442] ... generic registers: 4
[ 0.033444] ... value mask: 0000ffffffffffff
[ 0.033445] ... max period: 00007fffffffffff
[ 0.033446] ... fixed-purpose events: 0
[ 0.033447] ... event mask: 000000000000000f
[ 0.034543] ACPI: Core revision 20090903
[ 0.050005] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.050008] ftrace: allocating 22476 entries in 89 pages
[ 0.060053] Setting APIC routing to flat
[ 0.060345] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.160391] CPU0: AMD Phenom(tm) II X4 965 Processor stepping 02
[ 0.170000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.040000] Initializing CPU#1
[ 0.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.040000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.040000] CPU 1/0x1 -> Node 0
[ 0.040000] CPU: Physical Processor ID: 0
[ 0.040000] CPU: Processor Core ID: 1
[ 0.320028] CPU1: AMD Phenom(tm) II X4 965 Processor stepping 02
[ 0.320033] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.330047] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.040000] Initializing CPU#2
[ 0.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.040000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.040000] CPU 2/0x2 -> Node 0
[ 0.040000] CPU: Physical Processor ID: 0
[ 0.040000] CPU: Processor Core ID: 2
[ 0.490080] CPU2: AMD Phenom(tm) II X4 965 Processor stepping 02
[ 0.490085] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.500041] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.040000] Initializing CPU#3
[ 0.040000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.040000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.040000] CPU 3/0x3 -> Node 0
[ 0.040000] CPU: Physical Processor ID: 0
[ 0.040000] CPU: Processor Core ID: 3
[ 0.660035] CPU3: AMD Phenom(tm) II X4 965 Processor stepping 02
[ 0.660040] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.670008] Brought up 4 CPUs
[ 0.670009] Total of 4 processors activated (27292.61 BogoMIPS).
[ 0.672267] CPU0 attaching sched-domain:
[ 0.672271] domain 0: span 0-3 level MC
[ 0.672272] groups: 0 1 2 3
[ 0.672277] CPU1 attaching sched-domain:
[ 0.672278] domain 0: span 0-3 level MC
[ 0.672279] groups: 1 2 3 0
[ 0.672282] CPU2 attaching sched-domain:
[ 0.672283] domain 0: span 0-3 level MC
[ 0.672284] groups: 2 3 0 1
[ 0.672287] CPU3 attaching sched-domain:
[ 0.672288] domain 0: span 0-3 level MC
[ 0.672289] groups: 3 0 1 2
[ 0.672354] devtmpfs: initialized
[ 0.672354] regulator: core version 0.5
[ 0.672354] Time: 19:17:03 Date: 06/10/11
[ 0.672354] NET: Registered protocol family 16
[ 0.672354] node 0 link 0: io port [1000, ffffff]
[ 0.672354] TOM: 00000000c8000000 aka 3200M
[ 0.672354] Fam 10h mmconf [e0000000, efffffff]
[ 0.672354] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.672354] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.672354] node 0 link 0: mmio [a0000, bffff]
[ 0.672354] node 0 link 0: mmio [c8000000, dfffffff]
[ 0.672354] TOM2: 0000000238000000 aka 9088M
[ 0.672354] Trying to unpack rootfs image as initramfs...
[ 0.672354] bus: [00,07] on node 0 link 0
[ 0.672354] bus: 00 index 0 io port: [0, ffff]
[ 0.672354] bus: 00 index 1 mmio: [f0000000, ffffffff]
[ 0.672354] bus: 00 index 2 mmio: [a0000, bffff]
[ 0.672354] bus: 00 index 3 mmio: [c8000000, dfffffff]
[ 0.672354] bus: 00 index 4 mmio: [238000000, fcffffffff]
[ 0.672354] ACPI: bus type pci registered
[ 0.672354] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.672354] PCI: Not using MMCONFIG.
[ 0.672354] PCI: Using configuration type 1 for base access
[ 0.672354] PCI: Using configuration type 1 for extended access
[ 0.672354] bio: create slab <bio-0> at 0
[ 0.672354] ACPI: EC: Look up EC in DSDT
[ 0.672354] ACPI Error (psargs-0359): [ECEN] Namespace lookup failure, AE_NOT_FOUND
[ 0.672354] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81a0f040), AE_NOT_FOUND
[ 0.672354] ACPI Error (dswload-0781): [PRID] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.672354] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20090903/psloop-230)
[ 0.672354] ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81a0f040), AE_ALREADY_EXISTS
[ 0.672354] ACPI: Marking method \___ as Serialized because of AE_ALREADY_EXISTS error
[ 0.672354] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.793842] Freeing initrd memory: 8525k freed
[ 0.912057] ACPI: Interpreter enabled
[ 0.912062] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.912078] ACPI: Using IOAPIC for interrupt routing
[ 0.912124] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.913575] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.917591] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.921214] ACPI: No dock devices found.
[ 0.921325] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.921360] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.921410] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.921413] pci 0000:00:02.0: PME# disabled
[ 0.921446] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.921448] pci 0000:00:04.0: PME# disabled
[ 0.921481] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.921483] pci 0000:00:07.0: PME# disabled
[ 0.921515] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.921517] pci 0000:00:09.0: PME# disabled
[ 0.921564] pci 0000:00:11.0: reg 10 io port: [0xb000-0xb007]
[ 0.921570] pci 0000:00:11.0: reg 14 io port: [0xa000-0xa003]
[ 0.921576] pci 0000:00:11.0: reg 18 io port: [0x9000-0x9007]
[ 0.921582] pci 0000:00:11.0: reg 1c io port: [0x8000-0x8003]
[ 0.921588] pci 0000:00:11.0: reg 20 io port: [0x7000-0x700f]
[ 0.921594] pci 0000:00:11.0: reg 24 32bit mmio: [0xfbafe400-0xfbafe7ff]
[ 0.921611] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.921656] pci 0000:00:12.0: reg 10 32bit mmio: [0xfbaf6000-0xfbaf6fff]
[ 0.921708] pci 0000:00:12.1: reg 10 32bit mmio: [0xfbaf7000-0xfbaf7fff]
[ 0.921777] pci 0000:00:12.2: reg 10 32bit mmio: [0xfbafe800-0xfbafe8ff]
[ 0.921827] pci 0000:00:12.2: supports D1 D2
[ 0.921828] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.921831] pci 0000:00:12.2: PME# disabled
[ 0.921862] pci 0000:00:13.0: reg 10 32bit mmio: [0xfbafc000-0xfbafcfff]
[ 0.921914] pci 0000:00:13.1: reg 10 32bit mmio: [0xfbafd000-0xfbafdfff]
[ 0.921982] pci 0000:00:13.2: reg 10 32bit mmio: [0xfbafec00-0xfbafecff]
[ 0.922032] pci 0000:00:13.2: supports D1 D2
[ 0.922033] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.922037] pci 0000:00:13.2: PME# disabled
[ 0.922148] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.922154] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.922160] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.922165] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.922171] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.922234] pci 0000:00:14.2: reg 10 64bit mmio: [0xfbaf8000-0xfbafbfff]
[ 0.922275] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.922278] pci 0000:00:14.2: PME# disabled
[ 0.922379] pci 0000:00:14.5: reg 10 32bit mmio: [0xfbaff000-0xfbafffff]
[ 0.922516] pci 0000:05:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.922523] pci 0000:05:00.0: reg 18 64bit mmio: [0xfbfc0000-0xfbfdffff]
[ 0.922528] pci 0000:05:00.0: reg 20 io port: [0xe000-0xe0ff]
[ 0.922535] pci 0000:05:00.0: reg 30 32bit mmio pref: [0xfbfa0000-0xfbfbffff]
[ 0.922551] pci 0000:05:00.0: supports D1 D2
[ 0.922580] pci 0000:05:00.1: reg 10 64bit mmio: [0xfbffc000-0xfbffffff]
[ 0.922610] pci 0000:05:00.1: supports D1 D2
[ 0.922660] pci 0000:00:02.0: bridge io port: [0xe000-0xefff]
[ 0.922662] pci 0000:00:02.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[ 0.922666] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.922698] pci 0000:04:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 0.922712] pci 0000:04:00.0: reg 18 64bit mmio: [0xfbeff000-0xfbefffff]
[ 0.922722] pci 0000:04:00.0: reg 20 64bit mmio pref: [0xcfff0000-0xcfffffff]
[ 0.922728] pci 0000:04:00.0: reg 30 32bit mmio pref: [0xfbec0000-0xfbedffff]
[ 0.922755] pci 0000:04:00.0: supports D1 D2
[ 0.922756] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.922759] pci 0000:04:00.0: PME# disabled
[ 0.922815] pci 0000:00:04.0: bridge io port: [0xd000-0xdfff]
[ 0.922818] pci 0000:00:04.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
[ 0.922821] pci 0000:00:04.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff]
[ 0.922869] pci 0000:03:00.0: reg 10 64bit mmio: [0xfbc00000-0xfbdfffff]
[ 0.922954] pci 0000:03:00.0: supports D1 D2
[ 0.922956] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.922961] pci 0000:03:00.0: PME# disabled
[ 0.923022] pci 0000:00:07.0: bridge 32bit mmio: [0xfbc00000-0xfbdfffff]
[ 0.923087] pci 0000:02:00.0: reg 10 64bit mmio: [0xfbbff800-0xfbbfffff]
[ 0.923096] pci 0000:02:00.0: reg 18 io port: [0xc800-0xc8ff]
[ 0.923171] pci 0000:02:00.0: supports D2
[ 0.923173] pci 0000:02:00.0: PME# supported from D2 D3hot D3cold
[ 0.923178] pci 0000:02:00.0: PME# disabled
[ 0.923240] pci 0000:00:09.0: bridge io port: [0xc000-0xcfff]
[ 0.923242] pci 0000:00:09.0: bridge 32bit mmio: [0xfbb00000-0xfbbfffff]
[ 0.923298] pci 0000:00:14.4: transparent bridge
[ 0.923320] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.923465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.923507] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.923550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.923589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
[ 0.923644] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.926855] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.926934] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.927012] ACPI: PCI Interrupt Link [LNKC] (IRQs *4 7 10 11 12 14 15)
[ 0.927090] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[ 0.927168] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 12 14 15)
[ 0.927246] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 *11 12 14 15)
[ 0.927324] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 *10 11 12 14 15)
[ 0.927402] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 *10 11 12 14 15)
[ 0.927474] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.927477] vgaarb: loaded
[ 0.927540] SCSI subsystem initialized
[ 0.927557] libata version 3.00 loaded.
[ 0.927557] usbcore: registered new interface driver usbfs
[ 0.927557] usbcore: registered new interface driver hub
[ 0.927557] usbcore: registered new device driver usb
[ 0.927557] ACPI: WMI: Mapper loaded
[ 0.927557] PCI: Using ACPI for IRQ routing
[ 0.927557] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
[ 0.927557] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.927557] NetLabel: Initializing
[ 0.927557] NetLabel: domain hash size = 128
[ 0.927557] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.927557] NetLabel: unlabeled traffic allowed by default
[ 0.927557] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.927557] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.927557] Switching to clocksource tsc
[ 0.930916] AppArmor: AppArmor Filesystem Enabled
[ 0.930924] pnp: PnP ACPI init
[ 0.930931] ACPI: bus type pnp registered
[ 0.932131] pnp 00:0a: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.932133] pnp 00:0a: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.932135] pnp 00:0a: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.932137] pnp 00:0a: mem resource (0x100000-0xc7ffffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.932397] pnp: PnP ACPI: found 11 devices
[ 0.932398] ACPI: ACPI bus type pnp unregistered
[ 0.932405] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.932407] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.932410] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.932412] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 0.932414] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 0.932415] system 00:07: ioport range 0xc00-0xc01 has been reserved
[ 0.932417] system 00:07: ioport range 0xc14-0xc14 has been reserved
[ 0.932419] system 00:07: ioport range 0xc50-0xc51 has been reserved
[ 0.932420] system 00:07: ioport range 0xc52-0xc52 has been reserved
[ 0.932422] system 00:07: ioport range 0xc6c-0xc6c has been reserved
[ 0.932425] system 00:07: ioport range 0xc6f-0xc6f has been reserved
[ 0.932426] system 00:07: ioport range 0xcd0-0xcd1 has been reserved
[ 0.932428] system 00:07: ioport range 0xcd2-0xcd3 has been reserved
[ 0.932430] system 00:07: ioport range 0xcd4-0xcd5 has been reserved
[ 0.932431] system 00:07: ioport range 0xcd6-0xcd7 has been reserved
[ 0.932433] system 00:07: ioport range 0xcd8-0xcdf has been reserved
[ 0.932434] system 00:07: ioport range 0xb00-0xb3f has been reserved
[ 0.932436] system 00:07: ioport range 0x800-0x89f has been reserved
[ 0.932438] system 00:07: ioport range 0xb00-0xb0f has been reserved
[ 0.932439] system 00:07: ioport range 0xb20-0xb3f has been reserved
[ 0.932441] system 00:07: ioport range 0x900-0x90f has been reserved
[ 0.932443] system 00:07: ioport range 0x910-0x91f has been reserved
[ 0.932445] system 00:07: ioport range 0xfe00-0xfefe has been reserved
[ 0.932447] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.932448] system 00:07: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.932451] system 00:08: ioport range 0x230-0x23f has been reserved
[ 0.932453] system 00:08: ioport range 0x290-0x29f has been reserved
[ 0.932454] system 00:08: ioport range 0xf40-0xf4f has been reserved
[ 0.932456] system 00:08: ioport range 0xa30-0xa3f has been reserved
[ 0.932459] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.932465] system 00:0a: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.937091] pci 0000:00:02.0: PCI bridge, secondary bus 0000:05
[ 0.937093] pci 0000:00:02.0: IO window: 0xe000-0xefff
[ 0.937096] pci 0000:00:02.0: MEM window: 0xfbf00000-0xfbffffff
[ 0.937098] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.937102] pci 0000:00:04.0: PCI bridge, secondary bus 0000:04
[ 0.937104] pci 0000:00:04.0: IO window: 0xd000-0xdfff
[ 0.937106] pci 0000:00:04.0: MEM window: 0xfbe00000-0xfbefffff
[ 0.937108] pci 0000:00:04.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff
[ 0.937112] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 0.937113] pci 0000:00:07.0: IO window: disabled
[ 0.937115] pci 0000:00:07.0: MEM window: 0xfbc00000-0xfbdfffff
[ 0.937117] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.937120] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
[ 0.937122] pci 0000:00:09.0: IO window: 0xc000-0xcfff
[ 0.937125] pci 0000:00:09.0: MEM window: 0xfbb00000-0xfbbfffff
[ 0.937126] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.937129] pci 0000:00:14.4: PCI bridge, secondary bus 0000:01
[ 0.937131] pci 0000:00:14.4: IO window: disabled
[ 0.937135] pci 0000:00:14.4: MEM window: disabled
[ 0.937138] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.937148] alloc irq_desc for 18 on node 0
[ 0.937150] alloc kstat_irqs on node 0
[ 0.937153] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.937156] pci 0000:00:02.0: setting latency timer to 64
[ 0.937160] alloc irq_desc for 16 on node 0
[ 0.937161] alloc kstat_irqs on node 0
[ 0.937163] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.937165] pci 0000:00:04.0: setting latency timer to 64
[ 0.937169] alloc irq_desc for 19 on node 0
[ 0.937170] alloc kstat_irqs on node 0
[ 0.937172] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.937174] pci 0000:00:07.0: setting latency timer to 64
[ 0.937178] alloc irq_desc for 17 on node 0
[ 0.937179] alloc kstat_irqs on node 0
[ 0.937180] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.937183] pci 0000:00:09.0: setting latency timer to 64
[ 0.937189] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.937191] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.937192] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.937194] pci_bus 0000:05: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.937196] pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.937197] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.937199] pci_bus 0000:04: resource 1 mem: [0xfbe00000-0xfbefffff]
[ 0.937201] pci_bus 0000:04: resource 2 pref mem [0xcff00000-0xcfffffff]
[ 0.937202] pci_bus 0000:03: resource 1 mem: [0xfbc00000-0xfbdfffff]
[ 0.937204] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.937206] pci_bus 0000:02: resource 1 mem: [0xfbb00000-0xfbbfffff]
[ 0.937207] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.937209] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.937228] NET: Registered protocol family 2
[ 0.937368] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.938277] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.940187] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.940420] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.940422] TCP reno registered
[ 0.940483] NET: Registered protocol family 1
[ 1.100035] pci 0000:05:00.0: Boot video device
[ 1.100796] PCI-DMA: Disabling AGP.
[ 1.100878] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 1.100879] PCI-DMA: using GART IOMMU.
[ 1.100881] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 1.102619] Scanning for low memory corruption every 60 seconds
[ 1.102698] audit: initializing netlink socket (disabled)
[ 1.102711] type=2000 audit(1307733423.100:1): initialized
[ 1.108202] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.108997] VFS: Disk quotas dquot_6.5.2
[ 1.109026] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.109356] fuse init (API version 7.13)
[ 1.109397] msgmni has been set to 15748
[ 1.109567] alg: No test for stdrng (krng)
[ 1.109597] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.109599] io scheduler noop registered
[ 1.109600] io scheduler anticipatory registered
[ 1.109601] io scheduler deadline registered
[ 1.109621] io scheduler cfq registered (default)
[ 1.109718] alloc irq_desc for 24 on node 0
[ 1.109720] alloc kstat_irqs on node 0
[ 1.109725] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[ 1.109730] pcieport 0000:00:02.0: setting latency timer to 64
[ 1.109817] alloc irq_desc for 25 on node 0
[ 1.109818] alloc kstat_irqs on node 0
[ 1.109822] pcieport 0000:00:04.0: irq 25 for MSI/MSI-X
[ 1.109825] pcieport 0000:00:04.0: setting latency timer to 64
[ 1.109905] alloc irq_desc for 26 on node 0
[ 1.109906] alloc kstat_irqs on node 0
[ 1.109909] pcieport 0000:00:07.0: irq 26 for MSI/MSI-X
[ 1.109913] pcieport 0000:00:07.0: setting latency timer to 64
[ 1.109990] alloc irq_desc for 27 on node 0
[ 1.109991] alloc kstat_irqs on node 0
[ 1.109994] pcieport 0000:00:09.0: irq 27 for MSI/MSI-X
[ 1.109998] pcieport 0000:00:09.0: setting latency timer to 64
[ 1.110059] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.110073] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.110130] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.110133] ACPI: Power Button [PWRB]
[ 1.110163] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.110165] ACPI: Power Button [PWRF]
[ 1.110413] processor LNXCPU:00: registered as cooling_device0
[ 1.110445] processor LNXCPU:01: registered as cooling_device1
[ 1.110466] processor LNXCPU:02: registered as cooling_device2
[ 1.110483] processor LNXCPU:03: registered as cooling_device3
[ 1.111881] Linux agpgart interface v0.103
[ 1.111902] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.112521] brd: module loaded
[ 1.112754] loop: module loaded
[ 1.112797] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.112903] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.112923] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 1.113114] Fixed MDIO Bus: probed
[ 1.113132] PPP generic driver version 2.4.2
[ 1.113159] tun: Universal TUN/TAP device driver, 1.6
[ 1.113161] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.113211] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.113239] alloc irq_desc for 20 on node 0
[ 1.113240] alloc kstat_irqs on node 0
[ 1.113244] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 1.113264] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.113287] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.113315] ehci_hcd 0000:00:12.2: debug port 1
[ 1.113331] ehci_hcd 0000:00:12.2: irq 20, io mem 0xfbafe800
[ 1.130018] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.130081] usb usb1: configuration #1 chosen from 1 choice
[ 1.130098] hub 1-0:1.0: USB hub found
[ 1.130102] hub 1-0:1.0: 6 ports detected
[ 1.130178] alloc irq_desc for 23 on node 0
[ 1.130180] alloc kstat_irqs on node 0
[ 1.130183] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 1.130193] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.130215] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.130239] ehci_hcd 0000:00:13.2: debug port 1
[ 1.130255] ehci_hcd 0000:00:13.2: irq 23, io mem 0xfbafec00
[ 1.150017] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.150066] usb usb2: configuration #1 chosen from 1 choice
[ 1.150080] hub 2-0:1.0: USB hub found
[ 1.150084] hub 2-0:1.0: 6 ports detected
[ 1.150140] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.150172] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.150183] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.150201] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 1.150221] ohci_hcd 0000:00:12.0: irq 19, io mem 0xfbaf6000
[ 1.214081] usb usb3: configuration #1 chosen from 1 choice
[ 1.214095] hub 3-0:1.0: USB hub found
[ 1.214102] hub 3-0:1.0: 3 ports detected
[ 1.214174] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.214183] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 1.214201] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 1.214215] ohci_hcd 0000:00:12.1: irq 19, io mem 0xfbaf7000
[ 1.274075] usb usb4: configuration #1 chosen from 1 choice
[ 1.274089] hub 4-0:1.0: USB hub found
[ 1.274095] hub 4-0:1.0: 3 ports detected
[ 1.274165] alloc irq_desc for 21 on node 0
[ 1.274166] alloc kstat_irqs on node 0
[ 1.274169] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.274180] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.274199] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.274218] ohci_hcd 0000:00:13.0: irq 21, io mem 0xfbafc000
[ 1.334083] usb usb5: configuration #1 chosen from 1 choice
[ 1.334098] hub 5-0:1.0: USB hub found
[ 1.334104] hub 5-0:1.0: 3 ports detected
[ 1.334173] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.334183] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.334205] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 1.334219] ohci_hcd 0000:00:13.1: irq 21, io mem 0xfbafd000
[ 1.394076] usb usb6: configuration #1 chosen from 1 choice
[ 1.394089] hub 6-0:1.0: USB hub found
[ 1.394096] hub 6-0:1.0: 3 ports detected
[ 1.394167] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.394178] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.394196] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 1.394215] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbaff000
[ 1.454079] usb usb7: configuration #1 chosen from 1 choice
[ 1.454093] hub 7-0:1.0: USB hub found
[ 1.454099] hub 7-0:1.0: 2 ports detected
[ 1.454148] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.454188] PNP: No PS/2 controller found. Probing ports directly.
[ 1.455864] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.455871] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.455937] mice: PS/2 mouse device common for all mice
[ 1.455998] rtc_cmos 00:02: RTC can wake from S4
[ 1.456018] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.456039] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.456104] device-mapper: uevent: version 1.0.3
[ 1.456176] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.456253] device-mapper: multipath: version 1.1.0 loaded
[ 1.456255] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.456414] cpuidle: using governor ladder
[ 1.456415] cpuidle: using governor menu
[ 1.456613] TCP cubic registered
[ 1.456690] NET: Registered protocol family 10
[ 1.456937] lo: Disabled Privacy Extensions
[ 1.457095] NET: Registered protocol family 17
[ 1.457136] powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor processors (4 cpu cores) (version 2.20.00)
[ 1.457162] powernow-k8: 0 : pstate 0 (3400 MHz)
[ 1.457164] powernow-k8: 1 : pstate 1 (2700 MHz)
[ 1.457165] powernow-k8: 2 : pstate 2 (2200 MHz)
[ 1.457166] powernow-k8: 3 : pstate 3 (800 MHz)
[ 1.457400] PM: Resume from disk failed.
[ 1.457407] registered taskstats version 1
[ 1.457730] Magic number: 15:485:293
[ 1.457738] tty tty26: hash matches
[ 1.457787] rtc_cmos 00:02: setting system clock to 2011-06-10 19:17:03 UTC (1307733423)
[ 1.457789] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.457790] EDD information not available.
[ 1.457818] Freeing unused kernel memory: 888k freed
[ 1.457971] Write protecting the kernel read-only data: 7688k
[ 1.467173] udev: starting version 151
[ 1.486175] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.486192] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.486233] r8169 0000:04:00.0: setting latency timer to 64
[ 1.486265] alloc irq_desc for 28 on node 0
[ 1.486266] alloc kstat_irqs on node 0
[ 1.486276] r8169 0000:04:00.0: irq 28 for MSI/MSI-X
[ 1.486622] eth0: RTL8168c/8111c at 0xffffc90000c72000, 90:e6:ba:88:1a:c7, XID 1c4000c0 IRQ 28
[ 1.499238] ahci 0000:00:11.0: version 3.0
[ 1.499248] alloc irq_desc for 22 on node 0
[ 1.499249] alloc kstat_irqs on node 0
[ 1.499254] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.499295] alloc irq_desc for 29 on node 0
[ 1.499296] alloc kstat_irqs on node 0
[ 1.499304] ahci 0000:00:11.0: irq 29 for MSI/MSI-X
[ 1.499376] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.499379] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
[ 1.500441] ohci1394 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.500447] ohci1394 0000:02:00.0: setting latency timer to 64
[ 1.502193] scsi0 : ahci
[ 1.502807] scsi1 : ahci
[ 1.502854] scsi2 : ahci
[ 1.502897] scsi3 : ahci
[ 1.502925] ata1: SATA max UDMA/133 abar m1024@0xfbafe400 port 0xfbafe500 irq 29
[ 1.502928] ata2: SATA max UDMA/133 abar m1024@0xfbafe400 port 0xfbafe580 irq 29
[ 1.502931] ata3: SATA max UDMA/133 abar m1024@0xfbafe400 port 0xfbafe600 irq 29
[ 1.502933] ata4: SATA max UDMA/133 abar m1024@0xfbafe400 port 0xfbafe680 irq 29
[ 1.503098] scsi4 : pata_atiixp
[ 1.503135] scsi5 : pata_atiixp
[ 1.504145] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.504147] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.562068] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fbbff800-fbbfffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 1.640020] usb 4-2: new low speed USB device using ohci_hcd and address 2
[ 1.821149] usb 4-2: configuration #1 chosen from 1 choice
[ 1.853783] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.853810] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.030044] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.030065] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.030818] ata1.00: ATA-8: WDC WD1001FALS-00E8B0, 05.00K05, max UDMA/133
[ 2.030820] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.031683] ata1.00: configured for UDMA/133
[ 2.033055] ata3.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max UDMA/100
[ 2.036890] ata3.00: configured for UDMA/100
[ 2.050119] scsi 0:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[ 2.050215] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.050248] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.050283] sd 0:0:0:0: [sda] Write Protect is off
[ 2.050284] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.050295] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.050370] sda:
[ 2.057131] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN01 PQ: 0 ANSI: 5
[ 2.059700] sda1 sda2 < sda5 sda6 sda7 sda8sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.078135] Uniform CD-ROM driver Revision: 3.20
[ 2.078199] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.078235] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.085085] sda9 > sda4
[ 2.085311] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.150019] usb 4-3: new low speed USB device using ohci_hcd and address 3
[ 2.243333] usbcore: registered new interface driver hiddev
[ 2.247232] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input3
[ 2.247283] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:12.1-2/input0
[ 2.247297] usbcore: registered new interface driver usbhid
[ 2.247299] usbhid: v2.6:USB HID core driver
[ 2.371171] usb 4-3: configuration #1 chosen from 1 choice
[ 2.378245] input: USB USB Keykoard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.0/input/input4
[ 2.378287] generic-usb 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:12.1-3/input0
[ 2.700836] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 2.883868] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0000b85653]
[ 10.431556] udev: starting version 151
[ 10.463848] Adding 4883720k swap on /dev/sda6. Priority:-1 extents:1 across:4883720k
[ 10.481870] EDAC MC: Ver: 2.1.0 Apr 20 2011
[ 10.482785] lp: driver loaded but no devices found
[ 10.488150] vga16fb: initializing
[ 10.488153] vga16fb: mapped to 0xffff8800000a0000
[ 10.488251] fb0: VGA16 VGA frame buffer device
[ 10.492685] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 10.492688] Disabling lock debugging due to kernel taint
[ 10.500310] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
[ 10.500313] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.512996] type=1505 audit(1307744232.553:2): operation="profile_load" pid=645 name="/sbin/dhclient3"
[ 10.513169] type=1505 audit(1307744232.553:3): operation="profile_load" pid=645 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 10.513267] type=1505 audit(1307744232.553:4): operation="profile_load" pid=645 name="/usr/lib/connman/scripts/dhclient-script"
[ 10.513958] type=1505 audit(1307744232.553:5): operation="profile_replace" pid=705 name="/sbin/dhclient3"
[ 10.514133] type=1505 audit(1307744232.553:6): operation="profile_replace" pid=705 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 10.514232] type=1505 audit(1307744232.553:7): operation="profile_replace" pid=705 name="/usr/lib/connman/scripts/dhclient-script"
[ 10.514595] type=1505 audit(1307744232.553:8): operation="profile_load" pid=724 name="/usr/sbin/ntpd"
[ 10.515546] type=1505 audit(1307744232.553:9): operation="profile_replace" pid=725 name="/usr/sbin/ntpd"
[ 10.546103] [fglrx] Maximum main memory to use for locked dma buffers: 7644 MBytes.
[ 10.546165] [fglrx] vendor: 1002 device: 6898 count: 1
[ 10.546468] [fglrx] ioport: bar 4, base 0xe000, size: 0x100
[ 10.546478] pci 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.546482] pci 0000:05:00.0: setting latency timer to 64
[ 10.546746] [fglrx] Kernel PAT support is enabled
[ 10.546759] [fglrx] module loaded - fglrx 8.85.6 [Apr 19 2011] with 1 minors
[ 10.551883] it87: Found IT8720F chip at 0x290, revision 2
[ 10.551894] it87: in3 is VCC (+5V)
[ 10.551895] it87: in7 is VCCH (+5V Stand-By)
[ 10.551914] ACPI: resource it87 [0x295-0x296] conflicts with ACPI region SIOE [0x000290-0x0002af]
[ 10.551916] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 10.553644] EDAC amd64_edac: Ver: 3.2.0 Apr 20 2011
[ 10.554933] Linux media interface: v0.10
[ 10.555219] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 10.555226] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 10.555227] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 10.555228] (Note that use of the override may cause unknown side effects.)
[ 10.555238] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 10.672232] Linux video capture interface: v2.00
[ 10.796981] Console: switching to colour frame buffer device 80x30
[ 10.848986] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.851095] cx23885 driver version 0.0.2 loaded
[ 10.851166] cx23885 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 10.851218] CORE cx23885[0]: subsystem: 14f1:8502, board: Mygica X8506 DMB-TH [card=22,insmod option]
[ 11.209084] cx25840 2-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
[ 11.219018] cx25840 2-0044: firmware: requesting v4l-cx23885-avcore-01.fw
[ 11.327360] IR NEC protocol handler initialized
[ 11.353561] IR RC5(x) protocol handler initialized
[ 11.375856] IR RC6 protocol handler initialized
[ 11.405193] IR JVC protocol handler initialized
[ 11.412458] IR Sony protocol handler initialized
[ 11.425308] lirc_dev: IR Remote Control driver registered, major 248
[ 11.432982] IR LIRC bridge handler initialized
[ 11.534159] EXT4-fs (sda8): mounted filesystem with ordered data mode
[ 11.593867] hda_codec: AD1989B: BIOS auto-probing.
[ 11.593918] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
[ 11.601173] HDA Intel 0000:05:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 11.601209] HDA Intel 0000:05:00.1: setting latency timer to 64
[ 11.936927] cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
[ 11.983049] type=1505 audit(1307744234.024:10): operation="profile_load" pid=1033 name="/usr/share/gdm/guest-session/Xsession"
[ 11.983225] type=1505 audit(1307744234.024:11): operation="profile_replace" pid=1034 name="/sbin/dhclient3"
[ 11.990499] tuner 1-0061: Tuner -1 found with type(s) Radio TV.
[ 12.010125] xc5000 1-0061: creating new instance
[ 12.010822] xc5000: Successfully identified at address 0x61
[ 12.010823] xc5000: Firmware has not been loaded previously
[ 12.010876] cx23885[0]/0: registered device video0 [v4l2]
[ 12.016308] xc5000: waiting for firmware upload (dvb-fe-xc5000-1.6.114.fw)...
[ 12.016311] cx23885 0000:03:00.0: firmware: requesting dvb-fe-xc5000-1.6.114.fw
[ 12.022721] r8169: eth0: link up
[ 12.022725] r8169: eth0: link up
[ 12.059112] xc5000: firmware read 12401 bytes.
[ 12.059114] xc5000: firmware uploading...
[ 12.384734] /build/buildd/linux-2.6.32/drivers/hid/usbhid/hid-core.c: usb_submit_urb(ctrl) failed
[ 12.384745] generic-usb 0003:1C4F:0002.0003: timeout initializing reports
[ 12.384815] input: USB USB Keykoard as /devices/pci0000:00/0000:00:12.1/usb4/4-3/4-3:1.1/input/input6
[ 12.384880] generic-usb 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:12.1-3/input1
[ 12.384912] usb 4-2: USB disconnect, address 2
[ 13.450026] xc5000: firmware upload complete...
[ 13.651379] RPC: Registered udp transport module.
[ 13.651381] RPC: Registered tcp transport module.
[ 13.651382] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 13.663708] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 13.695454] svc: failed to register lockdv1 RPC service (errno 97).
[ 13.696011] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 13.702382] NFSD: starting 90-second grace period
[ 13.781273] usb 4-2: new low speed USB device using ohci_hcd and address 4
[ 13.994913] usb 4-2: configuration #1 chosen from 1 choice
[ 14.004971] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input7
[ 14.005034] generic-usb 0003:0458:003A.0004: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:12.1-2/input0
[ 14.062172] ppdev: user-space parallel port driver
[ 14.154065] cx23885_dvb_register() allocating 1 frontend(s)
[ 14.154069] cx23885[0]: cx23885 based dvb card
[ 14.158663] xc5000 1-0061: attaching existing instance
[ 14.159389] xc5000: Successfully identified at address 0x61
[ 14.159391] xc5000: Firmware has been loaded previously
[ 14.159394] DVB: registering new adapter (cx23885[0])
[ 14.159396] DVB: registering adapter 0 frontend 0 (Legend Silicon LGS8913/LGS8GXX DMB-TH)...
[ 14.159621] cx23885_dev_checkrevision() Hardware revision = 0xb0
[ 14.159629] cx23885[0]/0: found at 0000:03:00.0, rev: 2, irq: 19, latency: 0, mmio: 0xfbc00000
[ 14.159635] cx23885 0000:03:00.0: setting latency timer to 64
[ 14.159706] alloc irq_desc for 30 on node 0
[ 14.159708] alloc kstat_irqs on node 0
[ 14.159722] cx23885 0000:03:00.0: irq 30 for MSI/MSI-X
[ 14.583304] alloc irq_desc for 31 on node 0
[ 14.583307] alloc kstat_irqs on node 0
[ 14.583315] fglrx_pci 0000:05:00.0: irq 31 for MSI/MSI-X
[ 14.583763] [fglrx] Firegl kernel thread PID: 1736
[ 14.583797] [fglrx] Firegl kernel thread PID: 1737
[ 14.583830] [fglrx] Firegl kernel thread PID: 1738
[ 14.584029] [fglrx] IRQ 31 Enabled
[ 14.772654] [fglrx] Gart USWC size:1280 M.
[ 14.772657] [fglrx] Gart cacheable size:508 M.
[ 14.772660] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 14.772662] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000
[ 14.772663] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 14.788166] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8
[ 16.551134] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 18.077561] __ratelimit: 42 callbacks suppressed
[ 18.077563] type=1503 audit(1307744240.115:26): operation="mknod" pid=1201 parent=1 profile="/usr/sbin/named" requested_mask="c::" denied_mask="c::" fsuid=116 ouid=116 name="/var/log/bind9-resolv.log"
[ 19.110611] type=1503 audit(1307744241.152:27): operation="open" pid=1780 parent=1 profile="/usr/sbin/mysqld" requested_mask="::r" denied_mask="::r" fsuid=117 ouid=0 name="/home/tmp/"
Bookmarks