Hello all, just got my E520 today and am trying to scrap W7 asap, am running live 64 bit version from a USB stick as for some reason wubi won't install... but perhaps that is another thread. Or perhaps not.
Wireless hardware is an Intel Centrino wireless-N 1000. The wireless is enabled (checked) in the context menu accessed from the top right of the desktop but no networks are visible. The following is strange - if I tap the Lenovo wireless on/off button (F9) in conjunction with shift OR ctrl the wireless context menu on the top right will SOMETIMES show a list of available networks as if it was working correctly, but only for a fraction of a second. Very odd.
I have tried to follow the official Ubuntu 11.04 help tutorial 'Resolve problems with wireless connections' and have accessed the terminal and followed the commands it suggests. I will paste the output here. Not sure how useful this is though - I am a newb and really want to scrap W7 and install sweet, sweet Ubuntu:
ubuntu@ubuntu:~$ nm-tool
NetworkManager Tool
State: disconnected
- Device: eth0 -----------------------------------------------------------------
Type: Wired
Driver: r8169
State: unavailable
Default: no
HW Address: F0:DE:F1:5B:FF:4A
Capabilities:
Carrier Detect: yes
Speed: 10 Mb/s
Wired Properties
Carrier: off
- Device: wlan0 ----------------------------------------------------------------
Type: 802.11 WiFi
Driver: iwlagn
State: unavailable
Default: no
HW Address: 8C:A9:82:77:1A:34
Capabilities:
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points
ubuntu@ubuntu:~$
...
ubuntu@ubuntu:~$ sudo lshw -C network
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 06
serial: f0:de:f1:5b:ff:4a
size: 10Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s
resources: irq:41 ioport:4000(size=256) memory:90404000-90404fff memory:90400000-90403fff
*-network DISABLED
description: Wireless interface
product: Centrino Wireless-N 1000
vendor: Intel Corporation
physical id: 0
bus info: pci@0000:08:00.0
logical name: wlan0
version: 00
serial: 8c:a9:82:77:1a:34
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=iwlagn driverversion=2.6.38-8-generic firmware=128.50.3.1 build 13488 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn
resources: irq:43 memory:91d00000-91d01fff
ubuntu@ubuntu:~$
I have also seen other peeps on here with wireless problems being asked for the output of dmesg:
[ 4.376980] system 00:0c: [mem 0x40000000-0x401fffff] could not be reserved
[ 4.376982] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 4.377002] pnp: PnP ACPI: found 13 devices
[ 4.377004] ACPI: ACPI bus type pnp unregistered
[ 4.382931] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 4.382933] pci 0000:00:1c.0: bridge window [io disabled]
[ 4.382938] pci 0000:00:1c.0: bridge window [mem disabled]
[ 4.382943] pci 0000:00:1c.0: bridge window [mem pref disabled]
[ 4.382950] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[ 4.382953] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 4.382959] pci 0000:00:1c.1: bridge window [mem disabled]
[ 4.382964] pci 0000:00:1c.1: bridge window [mem 0x90400000-0x904fffff 64bit pref]
[ 4.382971] pci 0000:00:1c.2: PCI bridge to [bus 03-07]
[ 4.382974] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 4.382980] pci 0000:00:1c.2: bridge window [mem 0x91e00000-0x925fffff]
[ 4.382985] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x90cfffff 64bit pref]
[ 4.382992] pci 0000:00:1c.3: PCI bridge to [bus 08-08]
[ 4.382993] pci 0000:00:1c.3: bridge window [io disabled]
[ 4.382999] pci 0000:00:1c.3: bridge window [mem 0x91d00000-0x91dfffff]
[ 4.383003] pci 0000:00:1c.3: bridge window [mem pref disabled]
[ 4.383010] pci 0000:00:1c.7: PCI bridge to [bus 09-0d]
[ 4.383014] pci 0000:00:1c.7: bridge window [io 0x2000-0x2fff]
[ 4.383021] pci 0000:00:1c.7: bridge window [mem 0x91500000-0x91cfffff]
[ 4.383027] pci 0000:00:1c.7: bridge window [mem 0x90d00000-0x914fffff 64bit pref]
[ 4.383048] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.383055] pci 0000:00:1c.0: setting latency timer to 64
[ 4.383066] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.383070] pci 0000:00:1c.1: setting latency timer to 64
[ 4.383080] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.383085] pci 0000:00:1c.2: setting latency timer to 64
[ 4.383095] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 4.383099] pci 0000:00:1c.3: setting latency timer to 64
[ 4.383107] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 4.383112] pci 0000:00:1c.7: setting latency timer to 64
[ 4.383116] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 4.383118] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 4.383120] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 4.383122] pci_bus 0000:00: resource 7 [mem 0x7f200000-0xfeafffff]
[ 4.383124] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[ 4.383126] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 4.383128] pci_bus 0000:02: resource 2 [mem 0x90400000-0x904fffff 64bit pref]
[ 4.383130] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 4.383132] pci_bus 0000:03: resource 1 [mem 0x91e00000-0x925fffff]
[ 4.383134] pci_bus 0000:03: resource 2 [mem 0x90500000-0x90cfffff 64bit pref]
[ 4.383136] pci_bus 0000:08: resource 1 [mem 0x91d00000-0x91dfffff]
[ 4.383138] pci_bus 0000:09: resource 0 [io 0x2000-0x2fff]
[ 4.383140] pci_bus 0000:09: resource 1 [mem 0x91500000-0x91cfffff]
[ 4.383142] pci_bus 0000:09: resource 2 [mem 0x90d00000-0x914fffff 64bit pref]
[ 4.383170] NET: Registered protocol family 2
[ 4.383272] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 4.384053] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 4.385016] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 4.385253] TCP: Hash tables configured (established 262144 bind 65536)
[ 4.385255] TCP reno registered
[ 4.385261] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 4.385275] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 4.385377] NET: Registered protocol family 1
[ 4.385392] pci 0000:00:02.0: Boot video device
[ 4.385585] PCI: CLS 64 bytes, default 64
[ 4.385587] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 4.385589] Placing 64MB software IO TLB between ffff880072a00000 - ffff880076a00000
[ 4.385591] software IO TLB at phys 0x72a00000 - 0x76a00000
[ 4.386038] audit: initializing netlink socket (disabled)
[ 4.386046] type=2000 audit(1305578424.230:1): initialized
[ 4.399220] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.400766] VFS: Disk quotas dquot_6.5.2
[ 4.400815] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.401342] fuse init (API version 7.16)
[ 4.401416] msgmni has been set to 3701
[ 4.401627] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 4.401652] io scheduler noop registered
[ 4.401654] io scheduler deadline registered
[ 4.401688] io scheduler cfq registered (default)
[ 4.402028] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.402047] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 4.402085] intel_idle: MWAIT substates: 0x21120
[ 4.402087] intel_idle: v0.4 model 0x2A
[ 4.402088] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 4.469826] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.469878] ACPI: AC Adapter [ADP1] (off-line)
[ 4.469992] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 4.629491] ACPI: Lid Switch [LID0]
[ 4.629585] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 4.629588] ACPI: Power Button [PWRF]
[ 4.629753] ACPI: acpi_idle yielding to intel_idle
[ 4.631255] ACPI Error: No handler for Region [ECRM] (ffff88006f50e2d0) [EmbeddedControl] (20110112/evregion-369)
[ 4.631261] ACPI Error: Region EmbeddedControl(0x3) has no handler (20110112/exfldio-292)
[ 4.631265] ACPI Error: Method parse/execution failed [\_TZ_.RDEC] (Node ffff8801003cf4b0), AE_NOT_EXIST (20110112/psparse-536)
[ 4.631273] ACPI Error: Method parse/execution failed [\_TZ_.TZS0._TMP] (Node ffff8801003cf528), AE_NOT_EXIST (20110112/psparse-536)
[ 4.631441] thermal LNXTHERM:01: registered as thermal_zone0
[ 4.631443] ACPI: Thermal Zone [TZS1] (36 C)
[ 4.631458] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 4.631531] ERST: Table is not found!
[ 4.631610] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 4.632325] ACPI: Battery Slot [BAT0] (battery present)
[ 4.641396] Linux agpgart interface v0.103
[ 4.641471] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 4.641582] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 4.642743] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 4.642843] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 4.643748] brd: module loaded
[ 4.644171] loop: module loaded
[ 4.644244] i2c-core: driver [adp5520] using legacy suspend method
[ 4.644246] i2c-core: driver [adp5520] using legacy resume method
[ 4.644565] Fixed MDIO Bus: probed
[ 4.644588] PPP generic driver version 2.4.2
[ 4.644622] tun: Universal TUN/TAP device driver, 1.6
[ 4.644623] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 4.644689] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.644705] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.644722] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.644726] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 4.644756] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 4.644816] ehci_hcd 0000:00:1a.0: debug port 2
[ 4.648702] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 4.648721] ehci_hcd 0000:00:1a.0: irq 16, io mem 0x9260a000
[ 4.669438] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 4.669585] hub 1-0:1.0: USB hub found
[ 4.669589] hub 1-0:1.0: 2 ports detected
[ 4.669651] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.669663] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.669667] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 4.669701] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 4.669749] ehci_hcd 0000:00:1d.0: debug port 2
[ 4.673627] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 4.673640] ehci_hcd 0000:00:1d.0: irq 23, io mem 0x92609000
[ 4.689415] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 4.689545] hub 2-0:1.0: USB hub found
[ 4.689548] hub 2-0:1.0: 2 ports detected
[ 4.689601] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.689610] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.689702] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 4.691869] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.691875] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.691970] mousedev: PS/2 mouse device common for all mice
[ 4.692068] rtc_cmos 00:07: RTC can wake from S4
[ 4.692123] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 4.692151] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 4.692235] device-mapper: uevent: version 1.0.3
[ 4.692298] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 4.692358] device-mapper: multipath: version 1.2.0 loaded
[ 4.692361] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.692561] cpuidle: using governor ladder
[ 4.692733] cpuidle: using governor menu
[ 4.692926] TCP cubic registered
[ 4.693026] NET: Registered protocol family 10
[ 4.693426] NET: Registered protocol family 17
[ 4.693438] Registering the dns_resolver key type
[ 4.694316] PM: Hibernation image not present or could not be loaded.
[ 4.694327] registered taskstats version 1
[ 4.694836] Magic number: 11:450:700
[ 4.694937] rtc_cmos 00:07: setting system clock to 2011-05-16 20:40:24 UTC (1305578424)
[ 4.694939] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.694940] EDD information not available.
[ 4.696595] Freeing unused kernel memory: 956k freed
[ 4.696770] Write protecting the kernel read-only data: 10240k
[ 4.697612] Freeing unused kernel memory: 184k freed
[ 4.702333] Freeing unused kernel memory: 1444k freed
[ 4.709810] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 4.724918] <30>udev[75]: starting version 167
[ 4.764276] sdhci: Secure Digital Host Controller Interface driver
[ 4.764280] sdhci: Copyright(c) Pierre Ossman
[ 4.773191] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 4.773246] sdhci-pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.773504] sdhci-pci 0000:03:00.0: setting latency timer to 64
[ 4.773532] mmc0: no vmmc regulator found
[ 4.773620] Registered led device: mmc0::
[ 4.775530] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[ 4.778022] ahci 0000:00:1f.2: version 3.0
[ 4.778039] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.778112] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 4.778155] ahci: SSS flag set, parallel bus scan disabled
[ 4.790858] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode
[ 4.790864] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 4.790873] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.804284] [drm] Initialized drm 1.1.0 20060810
[ 4.808237] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.808274] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.808392] r8169 0000:02:00.0: setting latency timer to 64
[ 4.808410] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
[ 4.808632] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
[ 4.809327] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90000926000, f0:de:f1:5b:ff:4a, XID 0c200000 IRQ 41
[ 4.830000] scsi0 : ahci
[ 4.830157] scsi1 : ahci
[ 4.830271] scsi2 : ahci
[ 4.830409] scsi3 : ahci
[ 4.830650] scsi4 : ahci
[ 4.830790] scsi5 : ahci
[ 4.831170] ata1: SATA max UDMA/133 abar m2048@0x92608000 port 0x92608100 irq 40
[ 4.831172] ata2: DUMMY
[ 4.831173] ata3: DUMMY
[ 4.831174] ata4: DUMMY
[ 4.831177] ata5: SATA max UDMA/133 abar m2048@0x92608000 port 0x92608300 irq 40
[ 4.831180] ata6: SATA max UDMA/133 abar m2048@0x92608000 port 0x92608380 irq 40
[ 4.831239] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.831245] i915 0000:00:02.0: setting latency timer to 64
[ 4.887950] mtrr: no more MTRRs available
[ 4.887953] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 4.888246] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 4.888251] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.888252] [drm] Driver supports precise vblank timestamp query.
[ 4.988964] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 4.989371] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem: owns=io+mem
[ 5.134601] Console: switching to colour frame buffer device 170x48
[ 5.137299] fb0: inteldrmfb frame buffer device
[ 5.137301] drm: registered panic notifier
[ 5.139451] hub 1-1:1.0: USB hub found
[ 5.139534] hub 1-1:1.0: 6 ports detected
[ 5.178789] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.249465] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 5.249470] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 5.249473] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5.249787] acpi device:40: registered as cooling_device4
[ 5.250050] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 5.250125] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.250234] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 5.258662] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 5.378463] Refined TSC clocksource calibration: 2095.239 MHz.
[ 5.378482] Switching to clocksource tsc
[ 5.409038] hub 2-1:1.0: USB hub found
[ 5.409129] hub 2-1:1.0: 6 ports detected
[ 5.488464] usb 1-1.5: new high speed USB device using ehci_hcd and address 3
[ 5.688167] usb 2-1.2: new high speed USB device using ehci_hcd and address 3
[ 5.820926] ata1.00: ATA-8: TOSHIBA MK3261GSY, MC002E, max UDMA/100
[ 5.820935] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.822074] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 5.822085] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 5.822093] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5.823021] ata1.00: configured for UDMA/100
[ 5.823176] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK3261GS MC00 PQ: 0 ANSI: 5
[ 5.823314] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 5.823353] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.823374] sd 0:0:0:0: [sda] Write Protect is off
[ 5.823378] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.823405] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.826972] usbcore: registered new interface driver uas
[ 5.866722] sda: sda1 sda2 sda3
[ 5.867066] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.897853] usb 2-1.4: new full speed USB device using ehci_hcd and address 4
[ 6.566710] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.570998] ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 6.571017] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6.571020] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6.571025] ata5.00: ATAPI: SlimtypeDVD A DS8A5SH, XL63, max UDMA/100
[ 6.573460] ata5.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 6.573472] ata5.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 6.573480] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 6.573500] ata5.00: configured for UDMA/100
[ 6.577924] scsi 4:0:0:0: CD-ROM Slimtype DVD A DS8A5SH XL63 PQ: 0 ANSI: 5
[ 6.583843] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.583847] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.584028] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 6.584123] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 6.926178] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.935015] Initializing USB Mass Storage driver...
[ 6.935144] scsi6 : usb-storage 2-1.2:1.0
[ 6.935287] usbcore: registered new interface driver usb-storage
[ 6.935290] USB Mass Storage support registered.
[ 7.522923] Btrfs loaded
[ 7.527894] xor: automatically using best checksumming function: generic_sse
[ 7.575091] generic_sse: 9326.400 MB/sec
[ 7.575094] xor: using function: generic_sse (9326.400 MB/sec)
[ 7.577411] device-mapper: dm-raid45: initialized v0.2594b
[ 7.925544] scsi 6:0:0:0: Direct-Access A-DATA USB Flash Drive 0.00 PQ: 0 ANSI: 2
[ 7.926026] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 7.926620] sd 6:0:0:0: [sdb] 7897088 512-byte logical blocks: (4.04 GB/3.76 GiB)
[ 7.927425] sd 6:0:0:0: [sdb] Write Protect is off
[ 7.927429] sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 7.928054] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 7.928057] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.931964] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 7.931967] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 8.091953] sdb: sdb1
[ 8.094249] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 8.094253] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 8.094255] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 9.969247] aufs 2.1-standalone.tree-38-rcN-20110207
[ 9.982803] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 11.506812] EXT3-fs: barriers not enabled
[ 11.508350] kjournald starting. Commit interval 5 seconds
[ 11.509050] EXT3-fs (loop1): using internal journal
[ 11.509062] EXT3-fs (loop1): mounted filesystem with ordered data mode
[ 11.517567] aufs test_add:261:exe[706]: uid/gid/perm //filesystem.squashfs 0/0/0755, 1000/1000/0755
[ 21.480683] <30>udev[2464]: starting version 167
[ 21.919653] Linux video capture interface: v2.00
[ 21.954483] Bluetooth: Core ver 2.15
[ 21.954517] NET: Registered protocol family 31
[ 21.954519] Bluetooth: HCI device and connection manager initialized
[ 21.954522] Bluetooth: HCI socket layer initialized
[ 21.963261] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 21.994371] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b257)
[ 21.996327] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input4
[ 21.996383] usbcore: registered new interface driver uvcvideo
[ 21.996385] USB Video Class driver (v1.0.0)
[ 22.023285] cfg80211: Calling CRDA to update world regulatory domain
[ 22.031873] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 22.034759] usbcore: registered new interface driver btusb
[ 22.038194] Non-volatile memory driver v1.3
[ 22.254286] r8169 0000:02:00.0: eth0: link down
[ 22.254563] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.321722] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 22.321726] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[ 22.321814] iwlagn 0000:08:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 22.321845] iwlagn 0000:08:00.0: setting latency timer to 64
[ 22.321909] iwlagn 0000:08:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[ 22.345543] iwlagn 0000:08:00.0: device EEPROM VER=0x15d, CALIB=0x6
[ 22.345547] iwlagn 0000:08:00.0: Device SKU: 0X9
[ 22.345549] iwlagn 0000:08:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
[ 22.345566] iwlagn 0000:08:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 22.345852] iwlagn 0000:08:00.0: irq 43 for MSI/MSI-X
[ 22.498160] iwlagn 0000:08:00.0: loaded firmware version 128.50.3.1 build 13488
[ 22.498376] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 22.567710] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 22.646665] Bluetooth: L2CAP ver 2.15
[ 22.646670] Bluetooth: L2CAP socket layer initialized
[ 22.649205] Synaptics Touchpad, model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd000b3/0x340000/0xa0400
[ 22.649213] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 22.660557] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 22.660565] cfg80211: World regulatory domain updated:
[ 22.660568] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 22.660572] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.660576] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 22.660580] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 22.660583] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.660587] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.678542] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 22.678546] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 22.678549] thinkpad_acpi: ThinkPad BIOS 8HET28WW(1.10), EC unknown
[ 22.678552] thinkpad_acpi: Lenovo ThinkPad E520, model 1143CTO
[ 22.681679] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 22.681901] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ 22.695593] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 22.696080] Registered led device: tpacpi::thinklight
[ 22.696098] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 22.696238] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 22.698296] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[ 22.714879] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.714883] Bluetooth: BNEP filters: protocol multicast
[ 22.758548] Bluetooth: SCO (Voice Link) ver 0.6
[ 22.758552] Bluetooth: SCO socket layer initialized
[ 22.838309] Bluetooth: RFCOMM TTY layer initialized
[ 22.838315] Bluetooth: RFCOMM socket layer initialized
[ 22.838317] Bluetooth: RFCOMM ver 1.11
[ 22.913228] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 22.913297] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 22.913328] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 23.706623] lp: driver loaded but no devices found
[ 23.733590] ppdev: user-space parallel port driver
[ 27.235594] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 27.412016] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input7
[ 691.116615] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 710.438939] usb 2-1.4: USB disconnect, address 4
[ 712.744219] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 712.984036] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 715.530586] usb 2-1.4: new full speed USB device using ehci_hcd and address 5
[ 716.857808] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 717.127570] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 719.385856] usb 2-1.4: USB disconnect, address 5
[ 719.386005] btusb_intr_complete: hci0 urb ffff88006b815480 failed to resubmit (19)
[ 719.386175] btusb_bulk_complete: hci0 urb ffff88006b815a80 failed to resubmit (19)
[ 719.386189] btusb_bulk_complete: hci0 urb ffff88006b815f00 failed to resubmit (19)
[ 720.564084] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 720.762127] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 722.809553] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... blt ring idle [waiting on 39989, at 39989], missed IRQ?
[ 722.939646] usb 2-1.4: new full speed USB device using ehci_hcd and address 6
[ 724.796099] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 727.309728] usb 2-1.4: USB disconnect, address 6
[ 727.309869] btusb_intr_complete: hci0 urb ffff88006b52bd80 failed to resubmit (19)
[ 727.309883] btusb_bulk_complete: hci0 urb ffff88006b52b840 failed to resubmit (19)
[ 727.309997] btusb_bulk_complete: hci0 urb ffff88006b52b600 failed to resubmit (19)
[ 728.081258] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 730.338339] [drm:i915_hangcheck_ring_idle] *ERROR* Hangcheck timer elapsed... blt ring idle [waiting on 41446, at 41446], missed IRQ?
[ 732.843858] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 733.164283] usb 2-1.4: new full speed USB device using ehci_hcd and address 7
[ 734.722451] usb 2-1.4: USB disconnect, address 7
[ 734.722533] btusb_bulk_complete: hci0 urb ffff88006ddff540 failed to resubmit (19)
[ 734.722610] btusb_intr_complete: hci0 urb ffff88006f816300 failed to resubmit (19)
[ 734.722670] btusb_bulk_complete: hci0 urb ffff88006ddff180 failed to resubmit (19)
[ 738.915351] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 740.733618] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 740.832810] usb 2-1.4: new full speed USB device using ehci_hcd and address 8
[ 742.646571] usb 2-1.4: USB disconnect, address 8
[ 742.646676] btusb_bulk_complete: hci0 urb ffff88006f6cf180 failed to resubmit (19)
[ 742.646734] btusb_intr_complete: hci0 urb ffff88006b8dc9c0 failed to resubmit (19)
[ 742.646800] btusb_bulk_complete: hci0 urb ffff88006dc899c0 failed to resubmit (19)
[ 742.829072] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 745.265865] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 745.695709] usb 2-1.4: new full speed USB device using ehci_hcd and address 9
[ 1459.372376] usb 1-1.3: new high speed USB device using ehci_hcd and address 4
[ 1459.488985] scsi7 : usb-storage 1-1.3:1.0
[ 1460.482606] scsi 7:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0
[ 1460.484092] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 1460.608774] sd 7:0:0:0: [sdc] 7959552 512-byte logical blocks: (4.07 GB/3.79 GiB)
[ 1460.610120] sd 7:0:0:0: [sdc] Write Protect is off
[ 1460.610131] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 1460.611184] sd 7:0:0:0: [sdc] No Caching mode page present
[ 1460.611194] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 1460.614707] sd 7:0:0:0: [sdc] No Caching mode page present
[ 1460.614714] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 1460.615741] sdc: sdc1
[ 1460.618847] sd 7:0:0:0: [sdc] No Caching mode page present
[ 1460.618854] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 1460.618860] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 1984.365057] usb 1-1.3: USB disconnect, address 4
[ 2192.999343] usb 1-1.3: new high speed USB device using ehci_hcd and address 5
[ 2193.115804] scsi8 : usb-storage 1-1.3:1.0
[ 2194.109754] scsi 8:0:0:0: Direct-Access SanDisk SDDR-113 9412 PQ: 0 ANSI: 0
[ 2194.111194] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 2194.236359] sd 8:0:0:0: [sdc] 7959552 512-byte logical blocks: (4.07 GB/3.79 GiB)
[ 2194.237613] sd 8:0:0:0: [sdc] Write Protect is off
[ 2194.237623] sd 8:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 2194.238589] sd 8:0:0:0: [sdc] No Caching mode page present
[ 2194.238599] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 2194.243046] sd 8:0:0:0: [sdc] No Caching mode page present
[ 2194.243056] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 2194.244059] sdc: sdc1
[ 2194.247152] sd 8:0:0:0: [sdc] No Caching mode page present
[ 2194.247162] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 2194.247168] sd 8:0:0:0: [sdc] Attached SCSI removable disk
ubuntu@ubuntu:~$
Hope someone can help. This is driving me mental.
Cheers and that.
Bookmarks