Results 1 to 4 of 4

Thread: Archos Vision 24c stopped to work with Natty

  1. #1
    Join Date
    Feb 2011
    Location
    Bergamo, Italy
    Beans
    9
    Distro
    Ubuntu 11.04 Natty Narwhal

    Archos Vision 24c stopped to work with Natty

    Hi all,

    in Ubuntu 10.10 (here on my desktop PC, as usual), Kernel 2.6.35 lsusb correctly shows my mp3 player as:

    Bus 001 Device 002: ID 071b:3203 Domain Technologies, Inc. Rockchip Media Player

    Since I upgraded to Natty my Archos doesn't appear in the usb devices list as usual...
    I suppose there's a Kernel bug with my device and similar ones, what should I do?

    I tried the live CD too and the situation is identical.
    I need advice on how to report the bug in a more precise way. At this time, I cannot mount my new mp3 player.

  2. #2
    Join Date
    Feb 2011
    Location
    Bergamo, Italy
    Beans
    9
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Archos Vision 24c stopped to work with Natty

    This is the dmesg output when I attach the mp3 reader:

    [ 123.560109] usb 1-1: new high speed USB device using ehci_hcd and address 5
    [ 123.753971] usbcore: registered new interface driver uas
    [ 123.775053] Initializing USB Mass Storage driver...
    [ 123.775218] usb-storage 1-1:1.0: Quirks match for vid 071b pid 3203: 80600
    [ 123.775257] scsi2 : usb-storage 1-1:1.0
    [ 123.775410] usbcore: registered new interface driver usb-storage
    [ 123.775413] USB Mass Storage support registered.
    [ 124.772911] scsi 2:0:0:0: Direct-Access ARCHOS 1.41 PQ: 0 ANSI: 0
    [ 124.774478] sd 2:0:0:0: Attached scsi generic sg2 type 0
    [ 124.778153] sd 2:0:0:0: [sdb] 16025600 512-byte logical blocks: (8.20 GB/7.64 GiB)
    [ 124.778164] sd 2:0:0:0: [sdb] Assuming Write Enabled
    [ 124.892144] usb 1-1: reset high speed USB device using ehci_hcd and address 5
    [ 125.140100] usb 1-1: reset high speed USB device using ehci_hcd and address 5
    [ 125.388137] usb 1-1: reset high speed USB device using ehci_hcd and address 5
    [ 125.636140] usb 1-1: reset high speed USB device using ehci_hcd and address 5
    [ 125.884143] usb 1-1: reset high speed USB device using ehci_hcd and address 5
    [ 126.132138] usb 1-1: reset high speed USB device using ehci_hcd and address 5
    [ 126.380123] usb 1-1: reset high speed USB device using ehci_hcd and address 5
    [ 126.572523] usb 1-1: USB disconnect, address 5
    [ 126.572663] sd 2:0:0:0: [sdb] No Caching mode page present
    [ 126.572674] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [ 126.575572] sd 2:0:0:0: [sdb] READ CAPACITY failed
    [ 126.575582] sd 2:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    [ 126.575593] sd 2:0:0:0: [sdb] Sense not available.
    [ 126.575599] sd 2:0:0:0: [sdb] Assuming Write Enabled
    [ 126.575634] sd 2:0:0:0: [sdb] Asking for cache data failed
    [ 126.575642] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [ 126.575650] sdb: detected capacity change from 8205107200 to 0
    [ 126.576906] sd 2:0:0:0: [sdb] Attached SCSI removable disk

  3. #3
    Join Date
    May 2011
    Beans
    4

    Re: Archos Vision 24c stopped to work with Natty


  4. #4
    Join Date
    May 2011
    Beans
    4

    Re: Archos Vision 24c stopped to work with Natty

    It is now fixed in the upstream 2.6.38.7 stable release, so should find its way into a stock Natty kernel update in the not too distant future.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •