Results 1 to 3 of 3

Thread: Monitor Preferences - No Values - 11.04 New Install

  1. #1
    Join Date
    Jul 2006
    Beans
    44

    Monitor Preferences - No Values - 11.04 New Install

    I started with a newly built system using an ASUS P8 H67-M LE Series MB, that has Intel's Sandy Bridge

    The CPU is an i5

    I installed the 64 bit Ubuntu, 11.04

    In the Control Center, I go to the Monitor Preferences, and all the settings are grayed out.

    Monitor in On is set.

    Resolution, Refresh Rate and Rotation are disabled.

    If I click the Apply button, I get a pop up window with the message:

    The selected configuration for displays could not be applied
    required virtual size does not fit available size ....

    The Detect Monitors button is enabled, but clicking has no effect. No monitors are identified.

    How do I get the monitor settings working?

    Thanks
    Stephen

    I am going through a KVM switch.

  2. #2
    Join Date
    Jul 2006
    Beans
    44

    Re: Monitor Preferences - No Values - 11.04 New Install

    I bypassed the KVM switch and the monitor was identified. I saved that as the default.

    Restoring the KVM switch causes the monitor identification to disappear, but the saved settings seem to be preserved.

  3. #3

    Re: Monitor Preferences - No Values - 11.04 New Install

    you figure this out? I am having the same problems

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •