Page 1 of 25 12311 ... LastLast
Results 1 to 10 of 250

Thread: Wireless USB N300 Netgear install

  1. #1
    Join Date
    Feb 2011
    Location
    UK
    Beans
    13
    Distro
    Ubuntu 10.10 Maverick Meerkat

    Unhappy Wireless USB N300 Netgear install

    Hi all. I'm quite new to Ubuntu and have been running it off the memory stick trial for a while around a windows crash. It's great and I have been getting used to some programs such as Wine and some use of ndiswrapper.
    Unfortunately, my laptops wireless card is incompatible with Linux (typical ) and so I've purchased a wireless Usb device by Netgear (N300) in the hope that if this works I can install fully.

    I followed the instructions on a previous thread: http://ubuntuforums.org/showthread.php?t=885520

    and installed the drivers recommended. All it says however is that the hardware is not present. Am I missing a step somewhere? or is there an issue with running it off the memory stick (the only reason I haven't yet installed is the wireless issue).

    Any help would be most appreciated, and am happy to post screenshots/terminal results that will help.

  2. #2
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    23,201
    Distro
    Ubuntu 17.04 Zesty Zapus

    Re: Wireless USB N300 Netgear install

    my laptops wireless card is incompatible with Linux
    Are you quite sure? How about letting an old timer have a look at a terminal command:
    Code:
    lspci -nn
    Feel free to strip away everything that is not your wireless device; if in doubt, post it all.
    I've purchased a wireless Usb device by Netgear (N300)
    There are several models that have the N300 designation, according to Google. Please let us see:
    Code:
    lsusb
    ndiswrapper -l
    it says however is that the hardware is not present.
    That often, not always, means you have installed the Windows .inf for the wrong device.
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

  3. #3
    Join Date
    Feb 2011
    Location
    UK
    Beans
    13
    Distro
    Ubuntu 10.10 Maverick Meerkat

    Re: Wireless USB N300 Netgear install

    ubuntu@ubuntu:~$ lspci -nn
    09:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] (rev 12)
    0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
    I had previously checked whether it would work against a list of drivers using the instructions on

    https://help.ubuntu.com/community/Wi...CardsSupported

    The wireless card it came out with was a Dell wireless 1395 (Laptop is a Dell Inspiron 1525) which is in red on the chipset complete list.

    ubuntu@ubuntu:~$ lsusb
    Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 003: ID 0846:9020 NetGear, Inc.
    Bus 002 Device 002: ID 0781:5530 SanDisk Corp.
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    ubuntu@ubuntu:~$ ndiswrapper -l
    arusb_xp : driver installed
    bcmwlhigh5 : driver installed
    Sorry about not being specific on the wireless USB, the box says: "Netgear N300 wireless Usb adapter, WNA3100" If that is any clearer.

    Thanks

  4. #4
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    23,201
    Distro
    Ubuntu 17.04 Zesty Zapus

    Re: Wireless USB N300 Netgear install

    Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
    If you can carry the laptop over to the router and get an internet connection, please do:
    Code:
    sudo apt-get install bcmwl-kernel-source
    Remove the USB device, reboot and the built-in should be working.

    After that, we can fix up the Netgear, too, if you wish.
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

  5. #5
    Join Date
    Feb 2011
    Location
    UK
    Beans
    13
    Distro
    Ubuntu 10.10 Maverick Meerkat

    Re: Wireless USB N300 Netgear install

    I typed that into the terminal but on the reboot the wireless settings still say Firmware missing and it was unable to detect the network.

    The code output was:
    ubuntu@ubuntu:~$ sudo apt-get install bcmwl-kernel-source
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    The following extra packages will be installed:
    dkms
    The following NEW packages will be installed:
    bcmwl-kernel-source dkms
    0 upgraded, 2 newly installed, 0 to remove and 270 not upgraded.
    Need to get 71.3kB/967kB of archives.
    After this operation, 3,084kB of additional disk space will be used.
    Do you want to continue [Y/n]? y
    Get:1 http://archive.ubuntu.com/ubuntu/ maverick-updates/main dkms all 2.1.1.2-3ubuntu1.1 [71.3kB]
    Fetched 71.3kB in 18s (3,898B/s)
    Selecting previously deselected package dkms.
    (Reading database ... 129249 files and directories currently installed.)
    Unpacking dkms (from .../dkms_2.1.1.2-3ubuntu1.1_all.deb) ...
    Selecting previously deselected package bcmwl-kernel-source.
    Unpacking bcmwl-kernel-source (from .../bcmwl-kernel-source_5.60.48.36+bdcom-0ubuntu5_i386.deb) ...
    Processing triggers for man-db ...
    Setting up dkms (2.1.1.2-3ubuntu1.1) ...
    Setting up bcmwl-kernel-source (5.60.48.36+bdcom-0ubuntu5) ...
    Loading new bcmwl-5.60.48.36+bdcom DKMS files...
    First Installation: checking all kernels...
    Building only for 2.6.35-22-generic
    Building for architecture i686
    Building initial module for 2.6.35-22-generic
    Done.

    wl.ko:
    Running module version sanity check.
    - Original module
    - No original module exists within this kernel
    - Installation
    - Installing to /lib/modules/2.6.35-22-generic/updates/dkms/

    depmod....

    DKMS: install Completed.
    update-initramfs: deferring update (trigger activated)
    cp: cannot stat `/vmlinuz': No such file or directory
    dpkg: error processing bcmwl-kernel-source (--configure):
    subprocess installed post-installation script returned error exit status 1
    Processing triggers for initramfs-tools ...
    update-initramfs: Generating /boot/initrd.img-2.6.35-22-generic
    cp: cannot stat `/vmlinuz': No such file or directory
    dpkg: error processing initramfs-tools (--configure):
    subprocess installed post-installation script returned error exit status 1
    Errors were encountered while processing:
    bcmwl-kernel-source
    initramfs-tools
    W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ maverick/universe i386 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_maverick_universe_ binary-i386_Packages)
    W: Duplicate sources.list entry http://security.ubuntu.com/ubuntu/ maverick-security/universe i386 Packages (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_maverick-security_universe_binary-i386_Packages)
    W: Duplicate sources.list entry http://archive.ubuntu.com/ubuntu/ maverick-updates/universe i386 Packages (/var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_maverick-updates_universe_binary-i386_Packages)
    W: You may want to run apt-get update to correct these problems
    E: Sub-process /usr/bin/dpkg returned an error code (1)

  6. #6
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    23,201
    Distro
    Ubuntu 17.04 Zesty Zapus

    Re: Wireless USB N300 Netgear install

    W: You may want to run apt-get update to correct these problems
    E: Sub-process /usr/bin/dpkg returned an error code (1)
    Let's do just that:
    Code:
    sudo apt-get update
    sudo apt-get install bcmwl-kernel-source
    Any time a process ends in an error:
    Errors were encountered while processing:
    it will not magically yield success. We have to fix the error first.

    We're almost there!
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

  7. #7
    Join Date
    Feb 2011
    Location
    UK
    Beans
    13
    Distro
    Ubuntu 10.10 Maverick Meerkat

    Re: Wireless USB N300 Netgear install

    Sorry, should've realised that would be needed :\

    Ran it, but came up with:
    Reading package lists... Error!
    E: Encountered a section with no Package: header
    E: Problem with MergeList /var/lib/dpkg/status
    E: The package lists or status file could not be parsed or opened.
    ubuntu@ubuntu:~$ sudo apt-get install bcmwl-kernel-source
    Reading package lists... Error!
    E: Encountered a section with no Package: header
    E: Problem with MergeList /var/lib/dpkg/status
    E: The package lists or status file could not be parsed or opened.
    Should I have run the previous command again before these two?

  8. #8
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    23,201
    Distro
    Ubuntu 17.04 Zesty Zapus

    Re: Wireless USB N300 Netgear install

    Please see: http://ubuntuforums.org/showthread.php?t=863742

    Code:
    sudo rm /var/lib/apt/lists/* -vf
    sudo apt-get update
    sudo apt-get install bcmwl-kernel-source
    After fixing this, Update Manager will probably want to install 11 million updates, so set aside some free time!
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

  9. #9
    Join Date
    Feb 2011
    Location
    UK
    Beans
    13
    Distro
    Ubuntu 10.10 Maverick Meerkat

    Re: Wireless USB N300 Netgear install

    Err cdrom://Ubuntu 10.10 _Maverick Meerkat_ - Release i386 (20101007) maverick/main i386 Packages
    Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
    Err cdrom://Ubuntu 10.10 _Maverick Meerkat_ - Release i386 (20101007) maverick/restricted i386 Packages
    Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
    Fetched 9,050kB in 1min 13s (124kB/s)
    W: Failed to fetch cdrom://Ubuntu 10.10 _Maverick Meerkat_ - Release i386 (20101007)/dists/maverick/main/binary-i386/Packages.gz Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs

    W: Failed to fetch cdrom://Ubuntu 10.10 _Maverick Meerkat_ - Release i386 (20101007)/dists/maverick/restricted/binary-i386/Packages.gz Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs

    E: Some index files failed to download, they have been ignored, or old ones used instead.
    And then proceeded to give the same error as before.
    Just looked at the other thread and followed some of that. Come up with files missing or denied, Wonder if this is because i've not fully installed and it refuses to work?

  10. #10
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    23,201
    Distro
    Ubuntu 17.04 Zesty Zapus

    Re: Wireless USB N300 Netgear install

    Wonder if this is because i've not fully installed and it refuses to work?
    Meaning what? Are you running from the live CD? Please try:
    Code:
    sudo rm /var/lib/apt/lists/* -vf
    sudo apt-cdrom add
    sudo apt-get update
    sudo apt-get install bcmwl-kernel-source
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

Page 1 of 25 12311 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •