Page 9 of 11 FirstFirst ... 7891011 LastLast
Results 81 to 90 of 107

Thread: Vodafone USB (K 3805-z)

  1. #81
    Join Date
    Jan 2011
    Location
    Sussex UK
    Beans
    65
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Vodafone USB

    Quote Originally Posted by alexfish View Post
    Hi
    weird , result , but sakis3g does connect and then gets a disconnect message.
    have been trolling , and thinking , Ref to this cdc_ether ,
    had noticed from some log files posted on other forums , NM attempting to auto connect to usb0(net)
    can have the device attached and post results of these commands from the terminal
    Code:
    grep NetworkManager /var/log/syslog
    and this one
    Code:
    grep modem-manager /var/log/syslog
    Sorry for delay, extremely hectic week at work. Hope the attached provide some illumination.
    Attached Files Attached Files
    Don't take life too seriously, you'll never come out of it alive.

  2. #82
    Join Date
    Oct 2009
    Location
    A world without windows
    Beans
    Hidden!

    Re: Vodafone USB

    from the Network Manager info
    <info> (usb0): carrier is OFF
    <info> (usb0): new Ethernet device (driver: 'cdc_ether')
    <info> (usb0): exported as /org/freedesktop/NetworkManager/Devices/2
    <info> (usb0): now managed
    <info> (usb0): device state change: 1 -> 2 (reason 2)
    <info> (usb0): bringing up device.
    <info> (usb0): preparing device.
    <info> (usb0): deactivating device (reason: 2).

    Added default wired connection 'Auto usb0' for /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.5/net/usb0

    <info> (usb0): carrier now ON (device state 2)
    (usb0): device state change: 2 -> 3 (reason 40)
    <info> (usb0): carrier now OFF (device state 3)

    <info> (usb0): device state change: 3 -> 2 (reason 40)
    <info> (usb0): deactivating device (reason: 40).

    <info> Policy set 'Auto BTHomeHub-****' (wlan0) as default for routing and DNS. <<< try to disable this connection when trying the device

    <WARN> auto_activate_device(): Connection 'Auto usb0' auto-activation failed: (2) Device not managed by NetworkManager

    <info> (ttyACM1): new GSM device (driver: 'cdc_acm')
    <info> (ttyACM1): exported as /org/freedesktop/NetworkManager/Devices/3
    <info> (ttyACM1): now managed
    <info> (ttyACM1): device state change: 1 -> 2 (reason 2)
    <info> (ttyACM1): deactivating device (reason: 2).
    <info> (ttyACM1): device state change: 2 -> 3 (reason 0)
    as far as the device is concerned looks as if everything is ready but:

    <info> Policy set 'Auto BTHomeHub-****' (wlan0) as default for routing and DNS. <<< try to disable this connection when trying the device

    Boot up the computer without the device

    disable the BThomeHub , and monitor the Network connections with nm-tool
    Code:
    nm-tool
    connect the device
    wait a couple of minutes (do nothing)
    open up a second terminal
    Code:
    nm-tool
    or repeat until more info appears or different to first terminal ,post the results of both terminals

    also have have a look in the NM Connections , see if the interface shows up
    Last edited by alexfish; February 12th, 2011 at 01:57 PM.
    Two tin cans are better than an iphone

    http://www.ehow.co.uk/how_2067160_ma...hone.html?cr=1

  3. #83
    Join Date
    Jan 2011
    Location
    Sussex UK
    Beans
    65
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Vodafone USB

    Seems to be recognising but not connecting.
    Attached Files Attached Files
    Don't take life too seriously, you'll never come out of it alive.

  4. #84
    Join Date
    Jan 2011
    Location
    Sussex UK
    Beans
    65
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Vodafone USB

    Tried nm after reconnecting Home Hub out of curiosity and got different response.
    Attached Files Attached Files
    Don't take life too seriously, you'll never come out of it alive.

  5. #85
    Join Date
    Oct 2009
    Location
    A world without windows
    Beans
    Hidden!

    Re: Vodafone USB

    Hi

    only after after info at present, then will look through , to see if makes sense

    can connect the device after boot , again

    wait for the device to settle , post results of ifconfig

    Code:
    ifconfig
    alexfish
    Two tin cans are better than an iphone

    http://www.ehow.co.uk/how_2067160_ma...hone.html?cr=1

  6. #86
    Join Date
    Jan 2011
    Location
    Sussex UK
    Beans
    65
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Vodafone USB

    Requested file attached.
    Attached Files Attached Files
    Don't take life too seriously, you'll never come out of it alive.

  7. #87
    Join Date
    Oct 2009
    Location
    A world without windows
    Beans
    Hidden!

    Re: Vodafone USB

    Hi
    appols for late reply to this,
    Have been reading through the posts, + also a possible link to these types of devices,
    previously had posted on a verizon problem, well not so much a problem , since the device in some case does connect , had post on the thread , to look at how the HSO connect works, Well to cut a long story short.
    have been checking out latest data. in the BCM , from betavine
    and have found this in the wader core
    Code:
    # -*- coding: utf-8 -*-
    # Copyright (C) 2007-2010  Vodafone España, S.A.
    # Copyright (C) 2008-2009  Warp Networks, S.L.
    # Author:  Andrew Bird
    #
    # This program is free software; you can redistribute it and/or modify
    # it under the terms of the GNU General Public License as published by
    # the Free Software Foundation; either version 2 of the License, or
    # (at your option) any later version.
    #
    # This program is distributed in the hope that it will be useful,
    # but WITHOUT ANY WARRANTY; without even the implied warranty of
    # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    # GNU General Public License for more details.
    #
    # You should have received a copy of the GNU General Public License along
    # with this program; if not, write to the Free Software Foundation, Inc.,
    # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
    
    from wader.common.hardware.icera import IceraWCDMADevicePlugin
    from wader.common.consts import MM_IP_METHOD_STATIC
    
    
    class ZTEK3805(IceraWCDMADevicePlugin):
        """:class:`~wader.common.plugin.DevicePlugin` for ZTE's Vodafone K3805"""
        name = "ZTE K3805"
        version = "0.1"
        author = "Andrew Bird"
    
        __remote_name__ = "K3805-z"
    
        __properties__ = {
            'ID_VENDOR_ID': [0x19d2],
            'ID_MODEL_ID': [0x1003],
        }
    
        dialer = 'hso'
        ipmethod = MM_IP_METHOD_STATIC
    
    
    zte_k3805 = ZTEK3805()
    Having read through all of the data as regards the modem-manager , an the Network manager , there may be a possible problem as regards getting a connecting: the main is probably the probing by the modem-manager
    : had notice err buffer full ; + Network Manager pre probing the cdc_ether

    So:
    looks like all the necessary methods and checking can be done with BCM:
    + looks at the state of the device and will issue the necessary init codes etc: some of which would have been in the info i had requested , but not posted ; but never mind

    Best advice is to possibly to use Latest BCM as suggested in a previous post: since you now have sakis3g on the system ; trying BCM should not present a problem
    But there may be Two areas of concern at this point : that been of the state of the Two Modem interfaces : so will be looking through BCM , udev rules: and were placed within the system.
    + the ATTRibutes identification to which indicates the modem or port to use , by the system udev rules.
    Had noticed at one point , system states use of ACM0 then ACM1. The other been the state of the +CGDCONT , 1

    ADDED : here is one of the rules , notice the call to the ifconfig
    ACTION=="add", SUBSYSTEM=="net", ATTRS{idVendor}=="19d2", ATTRS{idProduct}=="1003", RUN="/sbin/ifconfig %k -arp"
    as yet can't find any other rule in BMC which relates to ZTE 1003,

    also entries for a ZTE K3806-Z ID's = 19d2:1015

    Found the init codes within wader core

    once installed I would ensure that modem-manager is un-installed and if Network Manager a problem try to disable
    Have had experience with installing the latest version , any queries , Please post

    Regards

    alexfish

    Try this one
    Development version: Beta 2.99 suitable for Ubuntu 10 (download)
    Site
    http://www.betavine.net/datacards/index.php/Main_Page

    other readers beware of downloading this software .. see below,

    just ran an install from the site , opt for the install from Software Center it will guide you through ,

    of note : own vodafone huawei device not recognized, although no problem with sakis3g
    Looked in the udev rules : found 77-mm-zte-port-types.rules no longer exist : can still connect with sakis3g;; think there were some 35 + rules in there for ZTE devices
    seem BCM use the same scheme number::: for there own rules '; have a spare copy in home dir ,, of note in the file "# do not edit this file, it will be overwritten on update"
    Now looking through the system for Huawie rules.Phew what next


    Must be Docking in Sidney Harbour by now
    and if it works will fly back; + if all working then it should be easy to bridge the connection for sharing
    Last edited by alexfish; February 24th, 2011 at 11:31 PM. Reason: of note :
    Two tin cans are better than an iphone

    http://www.ehow.co.uk/how_2067160_ma...hone.html?cr=1

  8. #88
    Join Date
    Oct 2009
    Location
    A world without windows
    Beans
    Hidden!

    Re: Vodafone USB

    Hi

    After the above problems , ran update on system ,
    for the Huawie device looks as if there is still a problem with loading the option driver,
    easy solved by modprobing the option driver , zte rules still missing , not a problem for me, but may be a headache for others

    thing of note,the notification to enter pin code now comes up auto ,
    as if the Gnome modem-manager was in existence'.
    yet no connections show in the NM ico . or anything in the nm-tool , not a big deal if have alternate method of dial up , could prove to be a headache for others

    the BCM now recognizes the Vodafone huawie device, none Vodafone devices not recognized, so will be looking further as regards any changes to the udev rules

    log files show a modem-manager running , yet does not respond to a killall ? nor does a modem-manager shows as installed on the system , and not found by searching the system
    alexfish-desktop modem-manager: (Huawei): GSM modem /sys/devices/pci0000:00/0000:00:02.1/usb1/1-3 claimed port ttyUSB2
    of note from install files (DEBIAN , "control")

    Package: wader-core
    Version: 0.5.5-1
    Architecture: all
    Maintainer: *suppressed*
    Installed-Size: 1476
    Depends: python (>= 2.5), python-central (>= 0.6.11), python-twisted-core, python-serial, python-dbus, python-tz, python-messaging (>= 0.5.9), usb-modeswitch (>= 1.1.0), usb-modeswitch-data (>= 20100322), python-gudev, wvdial | network-manager (>= 0.8), mobile-broadband-provider-info
    Recommends: python-twisted-conch
    Conflicts: modemmanager
    Replaces: modemmanager, vmc-core, wader-core
    Provides: modemmanager
    Section: net
    Priority: optional
    Homepage: http://www.wader-project.org
    Description: Internet connection assistant for mobile devices.
    Wader is a tool that manages 3G devices and mobile phones offering a dbus
    interface so other applications can use its services as connecting to the
    Internet, sending SMS, managing contacts, and such. This is the core
    package.
    .
    Python-Version: >= 2.5
    stopping network manager and restarting NM shows

    Code:
    alexfish-desktop NetworkManager[8779]: <warn> could not get modem list: Traceback (most recent call last):#012  File "/usr/lib/pymodules/python2.6/dbus/service.py", line 702, in _message_cb#012    retval = candidate_method(self, *args, **keywords)#012  File "/usr/local/lib/python2.6/dist-packages/wader/common/startup.py", line 94, in EnumerateDevices#012    d = self.hm.get_devices()#012  File "/usr/local/lib/python2.6/dist-packages/wader/common/oses/linux.py", line 130, in get_devices#012    return self._process_found_devices(devices)#012  File "/usr/local/lib/python2.6/dist-packages/wader/common/oses/linux.py", line 146, in _process_found_devices#012    for device in self._setup_devices(devices):#012  File "/usr/local/lib/python2.6/dist-packages/wader/common/oses/linux.py", line 223, in _setup_devices#012    for sysfs_path, info in found_devices.items()]#012  File "/usr/local/lib/python2.6/dist-packages/wader/common/oses/linux.py", line 399, in _get_device_from_info#012    raise RuntimeError("Could not find a plugin with info %s" % info)#012RuntimeError: Could not find a plugin with info {'ID_VENDOR_ID': 6610, 'DEVNAME': 'ttyUSB2', 'DEVICES': ['ttyUSB0', 'ttyUSB1', 'ttyUSB2'], 'ID_MODEL_ID': 49, 'ID_USB_DRIVER': 'option', 'ID_BUS': 'usb'}#012
    BCM shows in processes as " python"

    ADDED for interest : worth reading

    Vodafone (ZTE) K3805-Z and Vodafone (ZTE) K3806-Z : referenced to BCM from Betavine , in the wader core have found udev rules

    Code:
    # Vodafone (ZTE) K3805-Z
    ACTION=="add", SUBSYSTEM=="net", ATTRS{idVendor}=="19d2", ATTRS{idProduct}=="1003", RUN="/sbin/ifconfig %k -arp"
    
    # Vodafone (ZTE) K3806-Z
    ACTION=="add", SUBSYSTEM=="net", ATTRS{idVendor}=="19d2", ATTRS{idProduct}=="1015", RUN="/sbin/ifconfig %k -arp"
    the path /etc/udev/rules.d/99-vmc-quirks.rules
    if put on the system check there are no other 99* rules . reason: read the udev man pages
    if so think about renaming the schema to avoid conflicts .. also note the priority of the RUN= ,, not the normal RUN+= , "RUN=" means override.
    Also in the wader core there are plugins
    for the devices mentioned, looks good , seems to be what I suspected , as regards the init codes and how to bring the interface up

    worth looking into.

    ADDED:
    OK : can start by looking in the wader core / icera.py @ /usr/...local/python2.6/dist-package/wader/common/hardware/icera.py
    most of what is needed is in this file.
    of note is the standard 2g 3g connections . so now looks like a standard 3g connection , and the increased speed of the connection is via the cdc_ether interface
    Very similar to the HSO connect . also mention in one of the files ...called zte_k3805.py

    Info indicates the icera chipset can do a shutdown so can take between 2 and 7 seconds to connect ,other manager trying to connect may time out esp the pppd
    for users trying these devices with a manager other than BCM , suggest looking through pppd options to persist until there is a response from the servers


    this may be of interest . in Ubuntu the BCM log files are hidden in dot folder .. set nautilus to show hidden files /home/ directory then look for .bcm
    in the .bcm folder , will find the log file , along with db folder , database folder , inside of this , will find two data bases , " messages" and "usage"
    Last edited by alexfish; February 25th, 2011 at 02:46 PM.
    Two tin cans are better than an iphone

    http://www.ehow.co.uk/how_2067160_ma...hone.html?cr=1

  9. #89
    Join Date
    Jan 2011
    Location
    Sussex UK
    Beans
    65
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Vodafone USB

    Hi
    Only just seen your post, please excuse my ignorance but I tried downloading BCM from the link but the only bit I could get to install was the python messaging file. I see you said opt for software centre install but I don't know how to initiate this. It comes up with open with GDebi Package installer but this doesn't like unsatisfied dependencies and I can't find the package via the Synaptic Package Manager.
    Last edited by buteobuteo; February 27th, 2011 at 12:34 PM. Reason: add
    Don't take life too seriously, you'll never come out of it alive.

  10. #90
    Join Date
    Oct 2009
    Location
    A world without windows
    Beans
    Hidden!

    Re: Vodafone USB

    hi

    think first package maybe python messaging
    then BCM . or wader core
    which ever dependency shows up in the error message , that will be the one to download next , don't think you need the usb_modeswitch data


    normally when a download file .deb is clicked usually is an option message to download and save or use Software center.

    software center will show same errors, so don,t matter at this stage just use which method available.

    the packages are not listed in synaptic, but will list in synaptic once installed

    Added if still a problem can list exact nature of any error message

    alexfish
    Last edited by alexfish; February 27th, 2011 at 03:56 PM.
    Two tin cans are better than an iphone

    http://www.ehow.co.uk/how_2067160_ma...hone.html?cr=1

Page 9 of 11 FirstFirst ... 7891011 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •