Results 1 to 10 of 13

Thread: ASUS WL-138G V2 Lucid Lynx Wireless problem! HARD TO SOLVE!

Threaded View

  1. #1
    Join Date
    Dec 2010
    Beans
    14

    Exclamation ASUS WL-138G V2 Lucid Lynx Wireless problem! HARD TO SOLVE!

    Alright, I'm TOTALLY new to Ubuntu (it's my second day right now) and I have a problem that I cannot find a solution to ANYWHERE in the internet! I've researched like crazy, but haven't been able to find a suitable solution to fixing the ASUS WL-138G V2 's wireless to work on Lucid Lynx ( Ubuntu 10.04 ). I got the driver; got Ndiswrapper. Managed to install Ndiswrapper, and installed my card's driver using it. It shows "Hardware found: Yes" but it does not find ANY access point!

    Can someone please help me out here?
    Note: It is NOT possible for me to use ANY internet on Ubuntu whatsover - I have no temporary internet connection other than my only wireless connection. So, I have to use it on Windows 7, which I have installed with Lucid Lynx.

    Machine Brand and Model

    PC

    Wireless Brand, Model and Wireless Chipset:

    Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
    04:05.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)


    Something -
    id=750 name="/usr/bin/evince-previewer"
    [ 10.846123] type=1505 audit(1292850482.439:11): operation="profile_load" pid=750 name="/usr/bin/evince-thumbnailer"
    [ 10.867720] zc3xx: probe sensor -> 000a
    [ 10.867752] zc3xx: Find Sensor PB0330. Chip revision 0
    [ 10.871811] gspca: probe ok
    [ 10.871849] usbcore: registered new interface driver zc3xx
    [ 10.871854] zc3xx: registered
    [ 11.110079] r8169: eth0: link down
    [ 11.110390] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 11.164099] b43 ssb0:0: firmware: requesting b43/ucode5.fw
    [ 11.196845] b43 ssb0:0: firmware: requesting b43-open/ucode5.fw
    [ 11.199218] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
    [ 11.199224] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
    [ 11.199226] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/...devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
    [ 11.232568] b43 ssb0:0: firmware: requesting b43/ucode5.fw
    [ 11.242151] b43 ssb0:0: firmware: requesting b43-open/ucode5.fw
    [ 11.245357] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
    [ 11.245362] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
    [ 11.245365] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/...devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website
    _________________________

    Network configuration:


    *-network
    description: Ethernet interface
    product: RTL8111/8168B PCI Express Gigabit Ethernet controller
    vendor: Realtek Semiconductor Co., Ltd.
    physical id: 0
    bus info: pci@0000:03:00.0
    logical name: eth0
    version: 01
    serial: 00:1c:c0:d9:0c:50
    size: 10MB/s
    capacity: 1GB/s
    width: 64 bits
    clock: 33MHz
    capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
    configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s
    resources: irq:27 ioport:d000(size=256) memory:fb220000-fb220fff memory:fb200000-fb21ffff(prefetchable)
    *-network
    description: Network controller
    product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
    vendor: Broadcom Corporation
    physical id: 5
    bus info: pci@0000:04:05.0
    version: 02
    width: 32 bits
    clock: 33MHz
    capabilities: bus_master
    configuration: driver=b43-pci-bridge latency=32
    resources: irq:20 memory:fb100000-fb101fff
    *-network DISABLED
    description: Wireless interface
    physical id: 1
    logical name: wlan0
    serial: 00:1d:60:7e:85:91
    capabilities: ethernet physical wireless
    configuration: broadcast=yes multicast=yes wireless=IEEE 802.11bg

    ____________

    Scan for networks:


    wlan0 Failed to read scan data : Network is down


    OS version:



    Ubuntu 10.04.1 LTS


    kernel version:

    2.6.32-24-generic i686

    Restarting the network:

    * Reconfiguring network interfaces... [ OK ]


    Last edited by Green Moon; December 20th, 2010 at 02:54 PM. Reason: Added more info

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •