Hi,
don`t know what I`ve changed but since todays morning my asus-stick works fine
But I still want to know if it is correctly installed.
input
Code:
modinfo rt2870sta | egrep 'versi|filen'
output
Code:
filename: /lib/modules/2.6.38-11-generic/kernel/drivers/staging/rt2870/rt2870sta.ko
version: 2.1.0.0
srcversion: 93C0C58E1A016FE5BD4DC9F
vermagic: 2.6.38-11-generic SMP mod_unload modversions 686
input
output
Code:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 Ralink STA ESSID:"MY-SSID" Nickname:"RT2870STA"
Mode:Managed Frequency=2.437 GHz Access Point: MY-ACCESSPOINT
Bit Rate=54 Mb/s
RTS thr:off Fragment thr:off
Encryption key:MY-KEY
Link Quality=100/100 Signal level:-59 dBm Noise level:-63 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
input
output
Code:
Module Size Used by
nls_iso8859_1 12617 0
nls_cp437 12751 0
vfat 17335 0
fat 55505 1 vfat
binfmt_misc 13213 1
vesafb 13449 1
snd_atiixp_modem 18624 0
snd_via82xx 24685 2
gameport 15027 1 snd_via82xx
snd_via82xx_modem 18305 5
snd_intel8x0m 18493 0
snd_ac97_codec 105614 4 snd_atiixp_modem,snd_via82xx,snd_via82xx_modem,snd_intel8x0m
ac97_bus 12642 1 snd_ac97_codec
snd_pcm 80042 7 snd_atiixp_modem,snd_via82xx,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec
snd_mpu401_uart 13865 1 snd_via82xx
snd_seq_midi 13132 0
nvidia 7098106 24
snd_rawmidi 25269 2 snd_mpu401_uart,snd_seq_midi
ppdev 12849 0
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event
i2c_viapro 12969 0
snd_timer 28659 2 snd_pcm,snd_seq
via_ircc 26953 0
rt2870sta 410104 1
snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq
irda 185091 1 via_ircc
snd 55295 23 snd_atiixp_modem,snd_via82xx,snd_via82xx_modem,snd_intel8x0m,snd_ac97_codec,snd_mpu401_uart,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_page_alloc 14073 5 snd_atiixp_modem,snd_via82xx,snd_via82xx_modem,snd_intel8x0m,snd_pcm
parport_pc 32111 1
crc_ccitt 12595 2 irda,rt2870sta
soundcore 12600 1 snd
shpchp 32345 0
lp 13349 0
parport 36746 3 ppdev,parport_pc,lp
usbhid 41704 0
hid 77084 1 usbhid
usb_storage 43946 0
uas 17676 0
via_rhine 27131 0
pata_via 13368 2
floppy 60032 0
input
output
Code:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Scan completed :
Cell 01 - Address: MY-ADDRESS
Protocol:802.11g/n
ESSID:"MY-SSID"
Mode:Managed
Channel:6
Quality:89/100 Signal level:-55 dBm Noise level:-95 dBm
Encryption key:on
Bit Rates:300 Mb/s
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Cell 02 - Address: 00:12:BF:E1:5F:12
Protocol:802.11b/g
ESSID:"T\xFClay"
Mode:Managed
Channel:2
Quality:7/100 Signal level:-87 dBm Noise level:-95 dBm
Encryption key:on
Bit Rates:18 Mb/s
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Cell 03 - Address: 1C:BD:B9:90:53:84
Protocol:802.11b/g/n
ESSID:"dlink"
Mode:Managed
Channel:6
Quality:31/100 Signal level:-77 dBm Noise level:-95 dBm
Encryption key:on
Bit Rates:300 Mb/s
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
Cell 04 - Address: 00:1A:4F:97:64:8E
Protocol:802.11b/g
ESSID:"WLAN-001A4F97648E"
Mode:Managed
Channel:11
Quality:13/100 Signal level:-85 dBm Noise level:-95 dBm
Encryption key:on
Bit Rates:11 Mb/s
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (1) : TKIP
Authentication Suites (1) : PSK
input
output
Code:
lo no frequency information.
eth0 no frequency information.
wlan0 13 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Current Frequency=2.437 GHz (Channel 6)
input
Code:
rfkill list
dmesg | egrep 'rt3|rt2'
output
Code:
[ 20.270105] rt2870sta: module is from the staging directory, the quality is unknown, you have been warned.
[ 21.302539] usbcore: registered new interface driver rt2870
[ 23.964105] <==== rt28xx_init, Status=0
[ 24.986944] <==== rt28xx_init, Status=0
[ 273.078315] <==== rt28xx_init, Status=0
Bookmarks