Page 13 of 15 FirstFirst ... 31112131415 LastLast
Results 121 to 130 of 145

Thread: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

  1. #121
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    23,447
    Distro
    Ubuntu 17.04 Zesty Zapus

    Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    Quote Originally Posted by ratcheer View Post
    Why is make going into `/lib/modules/3.0.0-12-generic-pae/build'? That doesn't sound right, to me.

    Tim
    Exactly! I think it should go into ..headers-pae.
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

  2. #122
    Join Date
    Nov 2011
    Beans
    20

    Cool Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    Here's what I've got... (And thanks, guys, for your very attentive efforts! It's great to have support/efforts to fix this problem! Kudos to you both.)



    tsr@TimothySRooney:~$ sudo apt-get install build-essential linux-headers-generic-pae
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    build-essential is already the newest version.
    linux-headers-generic-pae is already the newest version.
    0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
    tsr@TimothySRooney:~$ sudo su
    root@TimothySRooney:/home/tsr# apt-get install --reinstall linux-headers-`uname -r`
    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 0 not upgraded.
    Need to get 0 B/832 kB of archives.
    After this operation, 0 B of additional disk space will be used.
    (Reading database ... 175489 files and directories currently installed.)
    Preparing to replace linux-headers-3.0.0-12-generic-pae 3.0.0-12.20 (using .../linux-headers-3.0.0-12-generic-pae_3.0.0-12.20_i386.deb) ...
    Unpacking replacement linux-headers-3.0.0-12-generic-pae ...
    Setting up linux-headers-3.0.0-12-generic-pae (3.0.0-12.20) ...
    Examining /etc/kernel/header_postinst.d.
    root@TimothySRooney:/home/tsr# cd Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217
    root@TimothySRooney:/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217# make clean
    cp -f os/linux/Makefile.6 os/linux/Makefile
    make -C os/linux clean
    make[1]: Entering directory `/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux'
    rm -f ../../common/*.o
    rm -f ../../common/.*.{o,cmd,flags,d}
    rm -f ../../os/linux/*.{o,ko,mod.{o,c}}
    rm -f ../../os/linux/.*.{cmd,flags,d}
    rm -fr ../../os/linux/.tmp_versions
    rm -f ../../os/linux/Module.symvers
    rm -f ../../os/linux/Module.markers
    rm -f ../../os/linux/modules.order
    rm -f ../../chips/*.o
    rm -f ../../chips/.*.{cmd,flags,d}
    rm -f ../../sta/*.o
    rm -f ../../sta/.*.{cmd,flags,d}
    make[1]: Leaving directory `/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux'
    rm -rf os/linux/Makefile
    root@TimothySRooney:/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217# make
    make -C tools
    make[1]: Entering directory `/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/tools'
    gcc -g bin2h.c -o bin2h
    make[1]: Leaving directory `/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/tools'
    /home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/tools/bin2h
    cp -f os/linux/Makefile.6 /home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux/Makefile
    make -C /lib/modules/3.0.0-12-generic-pae/build SUBDIRS=/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux modules
    make[1]: Entering directory `/lib/modules/3.0.0-12-generic-pae/build'
    make[1]: *** No rule to make target `modules'. Stop.
    make[1]: Leaving directory `/lib/modules/3.0.0-12-generic-pae/build'
    make: *** [LINUX] Error 2
    root@TimothySRooney:/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217#
    Last edited by timothysrooney; November 17th, 2011 at 03:39 PM.

  3. #123
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    23,447
    Distro
    Ubuntu 17.04 Zesty Zapus

    Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    Fascinating...and confounding. Please run:
    Code:
    sudo dpkg -s build-essential | grep Status
    If it comes back as:
    Status: install ok installed
    Then proceed with:
    Code:
    cd Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217
    sudo su
    make uninstall
    make clean
    make
    make install
    modprobe rt3562sta
    exit
    If build-essential is not correctly installed, please do:
    Code:
    sudo apt-get install --reinstall build-essential
    This just gets curiouser.
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

  4. #124
    Join Date
    Nov 2011
    Beans
    20

    Cool Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    Why does it hate me? I'm so nice to my computer! It shouldn't be difficult like this! At any rate, here's an answer to your commands/suggestions. It's not what I want to see... I don't think, at least! Maybe it'll help you? Regardless, here it is.

    tsr@TimothySRooney:~$ sudo dpkg -s build-essential | grep Status
    [sudo] password for tsr:

    Status: install ok installed
    tsr@TimothySRooney:~$ cd Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/
    tsr@TimothySRooney:~/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217$ sudo su
    root@TimothySRooney:/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217# make uninstall

    make -C /home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux -f Makefile.6 uninstall
    make[1]: Entering directory `/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux'
    rm -rf /lib/modules/3.0.0-12-generic-pae/kernel/drivers/net/wireless/rt3562sta.ko
    /sbin/depmod -a 3.0.0-12-generic-pae
    make[1]: Leaving directory `/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux'
    root@TimothySRooney:/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217# make clean
    cp -f os/linux/Makefile.6 os/linux/Makefile
    make -C os/linux clean
    make[1]: Entering directory `/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux'
    rm -f ../../common/*.o
    rm -f ../../common/.*.{o,cmd,flags,d}
    rm -f ../../os/linux/*.{o,ko,mod.{o,c}}
    rm -f ../../os/linux/.*.{cmd,flags,d}
    rm -fr ../../os/linux/.tmp_versions
    rm -f ../../os/linux/Module.symvers
    rm -f ../../os/linux/Module.markers
    rm -f ../../os/linux/modules.order
    rm -f ../../chips/*.o
    rm -f ../../chips/.*.{cmd,flags,d}
    rm -f ../../sta/*.o
    rm -f ../../sta/.*.{cmd,flags,d}
    make[1]: Leaving directory `/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux'
    rm -rf os/linux/Makefile
    root@TimothySRooney:/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217# make
    make -C tools
    make[1]: Entering directory `/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/tools'
    gcc -g bin2h.c -o bin2h
    make[1]: Leaving directory `/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/tools'
    /home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/tools/bin2h
    cp -f os/linux/Makefile.6 /home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux/Makefile
    make -C /lib/modules/3.0.0-12-generic-pae/build SUBDIRS=/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux modules
    make[1]: Entering directory `/lib/modules/3.0.0-12-generic-pae/build'
    make[1]: *** No rule to make target `modules'. Stop.
    make[1]: Leaving directory `/lib/modules/3.0.0-12-generic-pae/build'
    make: *** [LINUX] Error 2

  5. #125
    Join Date
    Nov 2011
    Beans
    20

    Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    Here's another question. This is just so I can try to understand what is going on with this whole process. Take a look at this output, please.

    tsr@TimothySRooney:~/Downloads/Ralink/2010_0115_RT3562_RT3062_Linux_STA_V2.3.0.0$ make
    make -C tools
    make[1]: Entering directory `/home/tsr/Downloads/Ralink/2010_0115_RT3562_RT3062_Linux_STA_V2.3.0.0/tools'
    gcc -g bin2h.c -o bin2h
    make[1]: Leaving directory `/home/tsr/Downloads/Ralink/2010_0115_RT3562_RT3062_Linux_STA_V2.3.0.0/tools'
    /home/tsr/Downloads/Ralink/2010_0115_RT3562_RT3062_Linux_STA_V2.3.0.0/tools/bin2h
    cp -f os/linux/Makefile.6 /home/tsr/Downloads/Ralink/2010_0115_RT3562_RT3062_Linux_STA_V2.3.0.0/os/linux/Makefile
    make -C /lib/modules/3.0.0-12-generic-pae/build SUBDIRS=/home/tsr/Downloads/Ralink/2010_0115_RT3562_RT3062_Linux_STA_V2.3.0.0/os/linux modules
    make[1]: Entering directory `/lib/modules/3.0.0-12-generic-pae/build'
    make[1]: *** No rule to make target `modules'. Stop.
    make[1]: Leaving directory `/lib/modules/3.0.0-12-generic-pae/build'
    make: *** [LINUX] Error 2
    tsr@TimothySRooney:~/Downloads/Ralink/2010_0115_RT3562_RT3062_Linux_STA_V2.3.0.0$ ls /lib/modules/3.0.0-12-generic/build
    arch Documentation fs ipc kernel mm samples sound ubuntu
    block drivers include Kbuild lib Module.symvers scripts source usr
    crypto firmware init Kconfig Makefile net security tools virt

    My question is that the stuff in green indicates there's no rule to make the target module. So I went to the directory specified, and that is the last line I typed. The contents of the directory are listed above. Where is the rule to make the target module? Does that mean the directory listed there should have a make? There is certainly a Makefile. What does that Makefile contain?

    Taking a look at the Makefile, it's much too long to post here, but I can see roughly what is in that Makefile. What seems to be the problem? Do I have to type make in this directory to make the stuff specified by the Makefile? Or has that already been done? And any response/reply to my question is appreciated. And if it's too long, complicated, or dull to merit a response, that's also fine. I was just curious to learn more of what is happening with this error. Thanks!

  6. #126
    Join Date
    Jun 2009
    Location
    Alabama
    Beans
    2,232

    Question Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    I have another question. I apologize if I have already asked it before.

    Why is your Ralink driver so old? The one I am using is version 2.4.1.1 dated 17-Dec-2010. Yours seems to be 2.3.0.0 dated 15-Jan-2010. I recommend downloading the latest driver directly from Ralink.

    Also, please post the output of "uname -a".

    Tim
    Cyberpower PC, Core i5 2500 3.3 gHz, 8GB DDR3, ATI 6770 1GB, Samsung BX 2440 LED 1080p, 1 TB SATA III, 2 TB SATA III, Siduction Linux 64-bit

  7. #127
    Join Date
    Nov 2011
    Beans
    20

    Cool Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    Quote Originally Posted by ratcheer View Post
    I have another question. I apologize if I have already asked it before.

    Why is your Ralink driver so old? The one I am using is version 2.4.1.1 dated 17-Dec-2010. Yours seems to be 2.3.0.0 dated 15-Jan-2010. I recommend downloading the latest driver directly from Ralink.

    Also, please post the output of "uname -a".

    Tim

    Thanks for the question, ratcheer. To respond to your first question, I have that output as the first line below. To respond to your second question, I've tried that newer driver. I just have been working with the older driver in my posts because that's what Chili has been typing in his replies. Regardless of which one I use, though, I'm getting the same results.

    Here's the output to show that... I think! Maybe if I did some of the steps in the newer directory, it would work. I think I have already tried, that, though, with the same negative results.

    tsr@TimothySRooney:~$ uname -a
    Linux TimothySRooney 3.0.0-12-generic-pae #20-Ubuntu SMP Fri Oct 7 16:37:17 UTC 2011 i686 athlon i386 GNU/Linux
    tsr@TimothySRooney:~$ cd Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/
    tsr@TimothySRooney:~/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217$ ls
    chips include Makefile README_STA_pci RT2860STA.dat sta_ate_iwpriv_usage.txt
    common iwpriv_usage.txt os RT2860STACard.dat sta tools
    tsr@TimothySRooney:~/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217$ sudo make
    [sudo] password for tsr:
    make -C tools
    make[1]: Entering directory `/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/tools'
    gcc -g bin2h.c -o bin2h
    make[1]: Leaving directory `/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/tools'
    /home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/tools/bin2h
    cp -f os/linux/Makefile.6 /home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux/Makefile
    make -C /lib/modules/3.0.0-12-generic-pae/build SUBDIRS=/home/tsr/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux modules
    make[1]: Entering directory `/lib/modules/3.0.0-12-generic-pae/build'
    make[1]: *** No rule to make target `modules'. Stop.
    make[1]: Leaving directory `/lib/modules/3.0.0-12-generic-pae/build'
    make: *** [LINUX] Error 2
    tsr@TimothySRooney:~/Downloads/Ralink/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217

  8. #128
    Join Date
    Jun 2009
    Location
    Alabama
    Beans
    2,232

    Red face Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    Ok, I am lost on this one. Sorry.

    Tim
    Cyberpower PC, Core i5 2500 3.3 gHz, 8GB DDR3, ATI 6770 1GB, Samsung BX 2440 LED 1080p, 1 TB SATA III, 2 TB SATA III, Siduction Linux 64-bit

  9. #129
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    23,447
    Distro
    Ubuntu 17.04 Zesty Zapus

    Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    My question is that the stuff in green indicates there's no rule to make the target module. So I went to the directory specified, and that is the last line I typed. The contents of the directory are listed above. Where is the rule to make the target module? Does that mean the directory listed there should have a make? There is certainly a Makefile. What does that Makefile contain?
    That's the whole point! Why is the Makefile going to /lib/modules/3.0.0-12-generic-pae/build? It ought to be going to linux-headers, as in my build:
    root@LAPTOP60:/home/chili/Desktop/Forum/L_/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217# make
    make -C tools
    make[1]: Entering directory `/home/chili/Desktop/Forum/L_/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/tools'
    gcc -g bin2h.c -o bin2h
    make[1]: Leaving directory `/home/chili/Desktop/Forum/L_/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/tools'
    /home/chili/Desktop/Forum/L_/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/tools/bin2h
    cp -f os/linux/Makefile.6 /home/chili/Desktop/Forum/L_/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux/Makefile
    make -C /lib/modules/3.0.0-12-generic-pae/build SUBDIRS=/home/chili/Desktop/Forum/L_/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux modules
    make[1]: Entering directory `/usr/src/linux-headers-3.0.0-12-generic-pae'
    CC [M] /home/chili/Desktop/Forum/L_/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux/../../common/crypt_md5.o
    CC [M] /home/chili/Desktop/Forum/L_/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217/os/linux/../../common/crypt_sha2.o
    <snip>
    I can't imagine what is wrong if you have the build tools and linux headers installed. We have attempted to verify that. Grasping at straws, please open Synaptic Package Manager and be sure that both are installed. Please see attached. Please verify the little green box indicating that build-essential, linux-headers-generic-pae and linux-headers-3.0.0-12-generic-pae are definately installed. If not, install them.

    In agreement with my esteemed colleague ratcheer, I'd remove the older versions 2.3.0.0 of the driver altogether.

    I am running very low on ideas/talent/mojo.
    Attached Images Attached Images
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, Ph.D.

  10. #130
    Join Date
    Nov 2011
    Beans
    20

    Smile Re: Rosewill RNX-N150PC PCI Ralink 3060 chip driver instructions

    Chili, thanks for all your work, advice, and suggestions. I have finally resolved the issue. Unfortunately, it's not in a manner that will help too many other people. That's okay for me, but it won't be beneficial to the rest of the users looking for solutions here. That's too bad. But if you are looking for a quick fix to this problem, I can at least give you my solution.

    After lots of time and effort (I know I invested > 10 hours in this, and I don't know how much Chili or Ratcheer also helped, but I sincerely appreciate all you guys did), I recognized it was time to cry "Uncle!" I went to Best Buy, found the NetGear N150 Wireless USB Adapter, found the installation tips on...

    Okay, I found the link earlier.

    This doesn't help at all! I know I found the link on this forum somewhere... I don't know what link or site it was, though. At any rate, I foudn the driver for the Netgear USB, installed that driver, added the Netgear N150 to an open USB on my PC, and sure enough, everything works! It's not helping anybody with the Rosewill RNX-N150PC, but at least my problem is solved. Thanks for everyone's help and attention. Recommendation? Stop at Best Buy, get the USB adapter for $35, and take wireless with you wherever you need it!

Page 13 of 15 FirstFirst ... 31112131415 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •