Canon CanoScan LiDe 110

[ales]

Hello,


I bought Canon Lide 110 Scanner. I tried some hints and tips from forums, but without any success. Sane is not officially supporting 110. 110 series is new one from this year.

I tried:

https://help.ubuntu.com/community/CheckIfScannerIsClone

also this

http://ubuntuforums.org/showthread.php?t=1238578

Desertdog's hint works not.

After all these things I get:

dreamwalker@dreamwalker:~/sane-backends$ scanimage -L
device `v4l:/dev/video0' is a Noname BT878 video (Pinnacle PCTV Stud virtual device

which is my TV Tuner Card.

When searching for scanner:
dreamwalker@dreamwalker:~/sane-backends$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.

# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x148f, product=0x3070) at libusb:001:007
found USB scanner (vendor=0x04a9 [Canon], product=0x1909 [CanoScan], chip=GL848+) at libusb:001:005
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.

# Not checking for parallel port scanners.

# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.

# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
dreamwalker@dreamwalker:~/sane-backends$

AS YOU CAN SEE IT FOUNDS TWO USB DEVICES, BUT I HAVE ONLY ONE SCANNER. I HAVE CONNECTED TO USB WIFI USB, PRINTER PIXMA3000, USB BT HUB AND SCANNER.

ALSO THE CHIP IDENTIFIED GL848+ DOES NOT CORRESPONDS WITH LIDE100,

/* GL847 devices */
{0x04a9, 0x1909, &canon_lide_100_model},
{0x04a9, 0x1905, &canon_lide_200_model},
{0x04a9, 0x1906, &canon_5600f_model},

LISTING FROM genesys_devices.c

Any help would be nice. Now I know, that beofre buying I should check sane , now it's too late.

I am running Ubuntu 10.10.


Ales

[legolas558]

I have the same scanner, this is my finding:

found USB scanner (vendor=0x04a9, product=0x1909, chip=GL848+?) at libusb:001:002

But xsane doesn't see it

[Henry-t]

Hi Ales / Legolas,

I have just stumbled upon this page today. It would appear that Sane has been updated only a few days ago...

http://www.bottomlesspit.org/2010/12...mmentInputForm

Although this is for a 210, I can confirm that after following these instructions have gotten my scanner (lide 110) working just fine, which is a relief as I have also been trying for some time to get this one to work. They are very similar HW anyway

Good Luck

Henry

[stijnblommerde]

thanks henry-t, my scanner is working.

OS: ubuntu 10.10; Scanner: Canoscan lide 110; software: Flegita
ubuntu software center > Flegita
speed up the scanning process > scan resolution > 100 dpi

not able to use the buttons on the scanner
not able to use the scan preview

but it is a start, and i am happy scanning

[stijnblommerde]

update on previous post: the application named 'simple scan' works better/faster and canonical provides critical updates.

[ales]

Hello, going to try it. Anyway thanks a lot for reply.


ALes

[ales]

Hi Ales / Legolas,

I have just stumbled upon this page today. It would appear that Sane has been updated only a few days ago...

http://www.bottomlesspit.org/2010/12...mmentInputForm

Although this is for a 210, I can confirm that after following these instructions have gotten my scanner (lide 110) working just fine, which is a relief as I have also been trying for some time to get this one to work. They are very similar HW anyway

Good Luck

Henry

Hello Henry,

seems, that link doesn't work? Has someone the hint? Can someone paste it here?


Ales

[ales]

So here is what you have to do in terminal. All command with sudo! After it will find your scanner automaticaly. I confirm it works with my Canon Lide 110!.


************
Auteur:
Olivier Bilodeau

I just bought a scanner thinking that if it’s not supported I would return it (but hoping that I wouldn’t have to).

I should have checked the sane website on supported hardware...

Turns out that support for the LiDE 210 was added into sane’s git a few days ago. This is so recent that there’s no ubuntu package for it yet. So I decided to add an updated one to my PPA.

So, to get your LiDE 210/110 scanner working under Ubuntu 10.10 you need to:

$ sudo add-apt-repository ppa:plaxx/random-fixes
$ sudo apt-get update
$ sudo apt-get install libsane sane-utils

This way you will have a recent sane version (December 23rd) with LiDE 210 support.

I’m pretty sure this won’t be required in Ubuntu 11.04 Natty since I would expect an updated release straight from the sane project to be included in the upcoming ubuntu release.

Happy holiday season to everyone!

************************

[orangenick]

is that working with the buttons now? Have found this scanner on Amazon and am tempted if it is possible to get it working....

thanks!

[ales]

is that working with the buttons now? Have found this scanner on Amazon and am tempted if it is possible to get it working....

thanks!

No, only without buttons (LIDE 110) .