Hi,
i just tried to burn a data dvd, but k3b says:
the log gives meCode:cdrecord returned unknown error code 254
Im remembering having similar issues a few month ago with wodim (which made me change to cdtools and solved the problem (at least for cds)), but now its there again. Does anybody have a clue on what to do?Code:Devices ----------------------- HL-DT-ST DVDRAM GSA-T40N JP01 (/dev/sr0, Cd-r, Cd-rw, Cd-rom, Dvd-rom, Dvd-r, Dvd-rw, Dvd-r DL, Dvd+r, Dvd+rw, Dvd+r DL) [Dvd-rom, Dvd-r sekvensiell, Dvd-r med två lager sekvensiell, Dvd-r med två lager och hoppmöjlighet, Dvd-ram, Dvd-rw begränsad överskrivning, Dvd-rw sekvensiell, Dvd+rw, Dvd+r, Dvd+r med två lager, Cd-rom, Cd-r, Cd-rw] [SAO, Track-at-once, Obehandlat, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Begränsad överskrivning, Lagerhopp] [%7] K3b::IsoImager ----------------------- mkisofs print size result: 2274218 (4657598464 bytes) System ----------------------- K3b Version: 1.91.0 KDE Version: 4.4.2 (KDE 4.4.2) QT Version: 4.6.2 Kernel: 2.6.32-25-generic Used versions ----------------------- mkisofs: 3.0 cdrecord: 3.0 cdrecord ----------------------- scsidev: '/dev/sr0' devname: '/dev/sr0' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 SCSI buffer size: 64512 /usr/bin/cdrecord: Warning: DMA resid 0 for 'read buffer', actual data is too short. /usr/bin/cdrecord: Warning: The DMA speed test has been skipped. Cdrecord-ProDVD-ProBD-Clone 3.00 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2010 J�rg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.9'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVDRAM GSA-T40N ' Revision : 'JP01' Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. Current: DVD-R sequential recording Profile: DVD-RAM Profile: DVD-R sequential recording (current) Profile: DVD-R/DL sequential recording Profile: DVD-R/DL layer jump recording Profile: DVD-RW sequential recording Profile: DVD-RW restricted overwrite Profile: DVD+RW Profile: DVD+R Profile: DVD+R/DL Profile: DVD-ROM Profile: CD-R Profile: CD-RW Profile: CD-ROM Profile: Removable Disk Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd). Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE Supported modes: PACKET SAO LAYER_JUMP Drive buf size : 1114112 = 1088 KB Drive pbuf size: 1966080 = 1920 KB FIFO size : 4194304 = 4096 KB /usr/bin/cdrecord: Data does not fit on current disk. /usr/bin/cdrecord: Notice: -overburn is not expected to work with DVD/BD media. /usr/bin/cdrecord: Notice: Overburning active. Trying to write more than the official disk capacity. Track 01: data 4441 MB Total size: 4441 MB = 2274218 sectors Current Secsize: 2048 Total power on hours: 0 WARNING: Phys disk size 2298496 differs from rzone size 2274224! Prerecorded disk? WARNING: Phys start: 196608 Phys end 2495103 Blocks total: 2274224 Blocks current: -16 Blocks remaining: -2274234 Reducing transfer size from 64512 to 32768 bytes. Starting to write CD/DVD/BD at speed 8 in real SAO mode for single session. Last chance to quit, starting real write in 3 seconds. 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... /usr/bin/cdrecord: Input/output error. reserve_track_rzone: scsi sendcmd: no error CDB: 53 00 00 00 00 00 22 B3 AA 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 53 00 00 0C 24 00 00 C0 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0 Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not valid) field ptr 0 cmd finished after 0.002s timeout 200s /usr/bin/cdrecord: Cannot open next track. input buffer ready. BURN-Free is ON. Writing time: 0.044s Average write speed 999.0x. Fixating... Fixating time: 0.003s /usr/bin/cdrecord: fifo had 128 puts and 0 gets. /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord command: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=/dev/sr0 speed=8 -sao driveropts=burnfree -overburn -data -tsize=2274218s - mkisofs ----------------------- /usr/bin/mkisofs: Warning: Cannot add inode hints with -no-cache-inodes. 2274218 /usr/bin/mkisofs: Warning: Cannot add inode hints with -no-cache-inodes. Setting input-charset to 'UTF-8' from locale. $DATA I WANT TO BURN 0.02% done, estimate finish Tue Oct 12 16:06:21 2010 0.04% done, estimate finish Tue Oct 12 16:06:21 2010 0.07% done, estimate finish Tue Oct 12 16:06:21 2010 0.09% done, estimate finish Tue Oct 12 16:06:21 2010 mkisofs calculate size command: ----------------------- /usr/bin/mkisofs -gui -graft-points -print-size -quiet -volid K3b-dataprojekt -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-kiesel/k3bV14656.tmp -rational-rock -hide-list /tmp/kde-kiesel/k3bv14656.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-kiesel/k3bw14656.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-kiesel/k3bE14656.tmp mkisofs command: ----------------------- /usr/bin/mkisofs -gui -graft-points -volid K3b-dataprojekt -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-kiesel/k3bA14656.tmp -rational-rock -hide-list /tmp/kde-kiesel/k3bF14656.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-kiesel/k3bz14656.tmp -no-cache-inodes -full-iso9660-filenames -iso-level 3 -path-list /tmp/kde-kiesel/k3bG14656.tmp
Thank you very much!
P.S.: im running kubuntu 10.04
Adv Reply
Re: k3b/cdrtools - unknown error 254
Re: k3b/cdrtools - unknown error 254
Bookmarks