I followed this guide for setting up the tftpd server.
first when i tried to start it, xinetd returned:
so I tried:
* Starting internet superserver xinetd [fail]
* Stopping internet superserver xinetd [ OK ]
* Starting internet superserver xinetd [ OK ]
But... When I run nmap from a remote machine, nmap returns:
when i try to connect to my host using tftp all commands are returned invalid except get and put which time out...
Interesting ports on ip.address.goes.here
Not shown: 997 closed ports
PORT STATE SERVICE
21/tcp open ftp
22/tcp open ssh
80/tcp open http
Nmap done: 1 IP address (1 host up) scanned in 1.63 seconds
It seems like my tftpd server is not listening on port 69.
Here is my /etc/xinetd.d/tftpd file
here is /etc/defaults/tftp-hpa
protocol = udp
port = 69
socket_type = dgram
wait = yes
user = nobody
server = /usr/sbin/in.tftpd
server_args = -s /cisco
disable = no
#Defaults for tftpd-hpa
OPTIONS="-l -s /cisco"
(I'd really like to get the logging working, however, getting tftpd working is first priority)
# Simple configuration file for xinetd
# Some defaults, and include /etc/xinetd.d/
# Please note that you need a log_type line to be able to use log_on_success
# and log_on_failure. The default is the following :
log_type = SYSLOG daemon info
I also set permissions to:
Can someone please point me in the right direction.
chmod 777 -R /cisco
Have I skipped a step in installing, configuring, or trouble shooting the tftpd?